FAT AP 转FIT AP

一、将瘦AP转换为胖AP

1、确定AP的版本，使用命令dir确定版本是否为wa2220_fit.bin，该版本为瘦AP。

<WA2210E-GE>dir
Directory of flash:/

   0     -rw-   3852680  Aug 08 2008 20:00:00   wa2200_fit.bin

6985 KB total (3220 KB free)

<WA2210E-GE>

2、与AC连接需要先格式化ap的flash     命令是format  flash:/

或者 <WA2210E-GE>delete /unreserved flash:/wa2200_fit.bin

3、然后使用TFTP工具

<WA2210E-GE>tftp 192.168.2.3 get wa2200_fat.bin  注释：server address

.File will be transferred in binary mode

Downloading file from remote TFTP server, please wait....................................................\

%Apr 26 12:26:44:387 2000 H3C IFNET/4/UPDOWN:

Protocol IPv6 on the interface Vlan-interface1 is DOWN ....................

TFTP: 4267520 bytes received in 68 second(s)

File downloaded successfully.

?

<WA2210E-GE>ap-mode fat

Change working mode will reboot system, do you want to continue? [Y/N]:y

Change working mode to FAT (please ensure FAT app is present)? [Y/N]:y

?

system start booting......Version 1.20

?

*******************************************************  

* H3C WA2200 BootWare , Ver 1.20 *

 4、设备重新启动

<WA2210E-GE>dir
Directory of flash:/

   0     -rw-   3852680  Aug 08 2008 20:00:00   wa2200_fat.bin

   注意事项：所有事项必须console连接正确、TFTP server与AP直接连通正常