H3C AC升级&配置过程（第一种方式，自动升级，推荐）

 

注意：升级过程中请勿断电断网

 

开始前，将 AP通电，连接至AC（即WX6103）的交换板上g0/0/10口上。

 

步骤一，获取 FAT_AP的SN序号：

<WA2220X-AGP>dis dev man

DEVICE_NAME:WA2220X-AGP

DEVICE_SERIAL_NUMBER: 210235A 29JB097000001

MAC_ADDRESS:0023-8949-3D20

MANUFACTURING_DATE:2009-07-12

VENDOR_NAME:H3C

 

步骤二，将 AP信息写入AC（即WX6103）中，所相应配置（注意，有Master和Backup两块主控板，一主一备，配置稍有区别）：

[AKDX_WX6103_Master]wlan ap test_2 model WA2220X-AGP

[AKDX_WX6103_Master-wlan-ap-test_2] priority level 6

[AKDX_WX6103_Master-wlan-ap-test_2] serial-id 210235A 29JB097000001

[AKDX_WX6103_Master-wlan-ap-test_2] radio 1

[AKDX_WX6103_Master-wlan-ap-test_2-radio-1] channel auto

[AKDX_WX6103_Master-wlan-ap-test_2-radio-1] max-power 19

[AKDX_WX6103_Master-wlan-ap-test_2-radio-1] radio 2

[AKDX_WX6103_Master-wlan-ap-test_2-radio-2] channel auto

[AKDX_WX6103_Master-wlan-ap-test_2-radio-2] max-power 27

[AKDX_WX6103_Master-wlan-ap-test_2-radio-2] service-template 1 vlan-id 3831

[AKDX_WX6103_Master-wlan-ap-test_2-radio-2] radio enable

[AKDX_WX6103_Master-wlan-ap-test_2-radio-2]qui

[AKDX_WX6103_Master-wlan-ap-test_2]quit

[AKDX_WX6103_Master] sav

The current configuration will be written to the device. Are you sure? [Y/N]: y

Please input the file name(*.cfg)[cfa0:/startup.cfg]

(To leave the existing filename unchanged, press the enter key):

cfa0:/startup.cfg exists, overwrite? [Y/N]: y

 Validating file. Please wait....

 Configuration is saved to device successfully.

 

 

参考模版：（双击图标打开）

______________________________________________

----------------------------------------------

WA2200X-AGP：

 

主控板_Master板上：

#

wlan ap test_2 model WA2220X-AGP

 priority level 6

 serial-id 210235A 29JB097000001

 radio 1

 channel auto

 max-power 19

 radio 2

 channel auto

 max-power 27

 service-template 1 vlan-id 3831

  radio enable

#

 

-------------------------------

相应，主控板_Backup板上：

#

wlan ap test_2 model WA2220X-AGP

 serial-id 210235A29JB097000001

 radio 1

 channel auto

 max-power 19

 radio 2

 channel auto

 max-power 27

 service-template 1 vlan-id 3831

 radio enable

#

 

_________________________________________________

-------------------------------------------------

WA2210-AG:

 

主控板_Master板上：

#

wlan ap test_0 model WA2210-AG

 priority level 6

 serial-id 210235A29DB092002160

 radio 1

 channel auto

 max-power 20

 service-template 1 vlan-id 3829

 radio enable

#

 

-------------------------------

相应，主控板_Backup板上：

#

wlan ap test_0 model WA2210-AG

 serial-id 210235A29DB092002160

 radio 1

 channel auto

 max-power 20

 service-template 1 vlan-id 3829

 radio enable

#

 

 

步骤三，命令行下，将 FAP_AP模式切换为FIT，开始自动升级过程。

<WA2220X-AGP> ap-mode fit

 Change working mode will reboot system, do you want to continue? [Y/N]: y

 Change working mode to FIT now? [Y/N]: y

system start booting......Version 1.31

 

      *******************************************************

      *                                                     *

      *          H3C WA2200 BootWare , Ver 1.31             *

      *                                                     *

      *******************************************************

 Copyright(c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. and its licensors.

 Compiled date: Mar 4 2009, 19:30:07

 CPU type         : PPC405EP

 CPU L1 Cache     : 16KB

 CPU Clock Speed : 266MHz

 Memory Type      : SDRAM

 Memory Size      : 64MB

 Memory Speed     : 133MHz

 BootWare Size    : 512KB

 Flash Size      : 8MB

 

 HardWare Version is Ver.D

 

 

 Application program does not exist.

 

Press Ctrl+B to enter extended boot menu...

 Attaching network interface lo0...

 done.

 

 Trying to get the IP address from the DHCP server......

 DNS domain name got from DHCP server is: .

 DNS server's IP address is: 0.0.0.0.

 Default Gateway's IP address is: 10.80.172.1.

 DHCP server's IP address is: 10.80.172.254.

 This client's assigned address is: 10.80.172.156.

 This client's subnet mask is: 255.255.255.0.

 The length of option 43 is: 0.

 

 Change State : Idle to Broadcast Discovery

 Change State : Broadcast Discovery to Join

 Change State : Join to JoinAck

 Change State : JoinCfm to Image Download

Update

APP...........................................................................................

.................................

 Write size is less,

fails.........................................................................................

..............................................................................................

..............................................................................................

..............................................................................................

.............................................................................................

Update Success!

 [State : ImageLoad] Image download successful

 [State : Idle] Reset request, rebooting the AP

 Please make sure: the baud rate on the PC side is set to 9600 bps after reboot

 Rebooting......

 

system start booting......Version 1.31

 

      *******************************************************

      *                                                     *

      *          H3C WA2200 BootWare , Ver 1.31             *

      *                                                     *

      *******************************************************

 Copyright(c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. and its licensors.

 Compiled date: Mar 4 2009, 19:30:07

 CPU type         : PPC405EP

 CPU L1 Cache     : 16KB

 CPU Clock Speed : 266MHz

 Memory Type      : SDRAM

 Memory Size      : 64MB

 Memory Speed     : 133MHz

 BootWare Size    : 512KB

 Flash Size      : 8MB

 

 HardWare Version is Ver.D

 

 

Press Ctrl+B to enter extended boot menu...

Updating Extend BootWare................................................

Updating the Norm Basic BootWare................................

Update Bootware from packet ok, now reboot system.

 Please make sure: the baud rate on the PC side is set to 9600 bps after reboot

 Rebooting......

........

system start booting......Version 1.32

 

      *******************************************************

      *                                                     *

      *          H3C WA2200 BootWare , Ver 1.32             *

      *                                                     *

      *******************************************************

 Copyright(c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. and its licensors.

 Compiled date: Jun 16 2009, 19:11:36

 CPU type         : PPC405EP

 CPU L1 Cache     : 16KB

 CPU Clock Speed : 266MHz

 Memory Type      : SDRAM

 Memory Size      : 64MB

 Memory Speed     : 133MHz

 BootWare Size    : 512KB

 Flash Size      : 8MB

 

 HardWare Version is Ver.D

 

 

Press Ctrl+B to enter extended boot menu...

The main application file is self-decompressing...

Decompressing...done!........

Startup configuration file does not exist.

User interface con0 is available.

 

 

 

 

******************************************************************************

* Copyright (c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. All rights reserved. *

* Without the owner's prior written consent,                                  *

* no decompiling or reverse-engineering shall be allowed.                     *

******************************************************************************

 

User interface con0 is available.

 

 

 

Please press ENTER.

 

 

步骤四：在 AC上查看AP能否注册成功。

 

以下是 AP 自动升级并重启后 AC 上显示信息：

[AKDX_WX6103_Master]

#Jul 23 12:08:22:894 2009 AKDX_WX6103_Master LWPS/4/Tunnel Up: Tunnel Up:1.3.6.1.4.1.25506.2.75.1.3.0.1<hh3cDot11ACMtTunnelSetupTrap> Serial Id:210235A29JB097000001 UpInfo:1

%Jul 23 12:08:23:027 2009 AKDX_WX6103_Master IFNET/4/LINK UPDOWN:

 WLAN-DBSS1:9: link status is UP

%Jul 23 12:08:23:033 2009 AKDX_WX6103_Master IFNET/4/LINK UPDOWN:

 WLAN-ESS1: link status is UP

#Jul 23 12:08:23:053 2009 AKDX_WX6103_Master IFNET/4/INTERFACE UPDOWN:

 Trap 1.3.6.1.6.3.1.1.5.4<linkUp>: Interface 12517376 is Up, ifAdminStatus is 1, ifOperStatus is 1 

#Jul 23 12:08:23:063 2009 AKDX_WX6103_Master IFNET/4/INTERFACE UPDOWN:

 Trap 1.3.6.1.6.3.1.1.5.4<linkUp>: Interface 12451840 is Up, ifAdminStatus is 1, ifOperStatus is 1 

[AKDX_WX6103_Master]

#Jul 23 12:08:56:663 2009 AKDX_WX6103_Master WMAC/4/Channel Change:Channel:1.3.6.1.4.1.25506.2.75.2.3.0.5<hh3cDot11APMtRdoChanlChgTrap> Serial Id:210235A29JB097000001 Serial Id:210235A29JB097000001 Radio Id:2 ChangeMode:2 Old:0 New:1

#Jul 23 12:09:08:333 2009 AKDX_WX6103_Master WMAC/4/Station Authorization Success:Station Auth Success:1.3.6.1.4.1.25506.2.75.3.2.0.6<hh3cDot11StationAuthorSuccTrap> StaMac1:00:1F:3C:6C:39:8E StaMac2:00:1F:3C:6C:39:8E UserName: StaMac3:00:1F:3C:6C:39:8E VLANId:3831 SessionStartTime:2009-7-23,12:9:8.0 Radioid:2 SSIDName:ChinaNet APID:210235A29JB097000001

#Jul 23 12:09:37:473 2009 AKDX_WX6103_Master WMAC/4/Station Deassociate:Station Deassoc:1.3.6.1.4.1.25506.2.75.3.2.0.5<hh3cDot11StationDeAssocTrap> StaMac1:00:1F:3C:6C:39:8E StaMac2:00:1F:3C:6C:39:8E UserName: StaMac3:00:1F:3C:6C:39:8E VLANId:3831 Radioid:2 SSIDName:ChinaNet SessionDuration:29 APID:210235A29JB097000001

#Jul 23 12:09:37:504 2009 AKDX_WX6103_Master WMAC/4/Station Roam Success:Station Roam Success:1.3.6.1.4.1.25506.2.75.3.2.0.7<hh3cDot11StationRoamingTrap> StaMac1:00:1F:3C:6C:39:8E StaMac2:00:1F:3C:6C:39:8E Serial Id:210235A29JB097000001 UserName: StaMac3:00:1F:3C:6C:39:8E VLAN Id:3831 RoamingTime:84281 Radioid:2 SSIDName:ChinaNet AC IP Address:0.0.0.0

#Jul 23 12:09:37:533 2009 AKDX_WX6103_Master WMAC/4/Station Authorization Success:Station Auth Success:1.3.6.1.4.1.25506.2.75.3.2.0.6<hh3cDot11StationAuthorSuccTrap> StaMac1:00:1F:3C:6C:39:8E StaMac2:00:1F:3C:6C:39:8E UserName: StaMac3:00:1F:3C:6C:39:8E VLANId:3831 SessionStartTime:2009-7-23,12:9:37.0 Radioid:2 SSIDName:ChinaNet APID:210235A29JB097000001

#Jul 23 12:09:44:703 2009 AKDX_WX6103_Master WMAC/4/Station Authorization Success:Station Auth Success:1.3.6.1.4.1.25506.2.75.3.2.0.6<hh3cDot11StationAuthorSuccTrap> StaMac1:00:21:5C:4F:EE:87 StaMac2:00:21:5C:4F:EE:87 UserName: StaMac3:00:21:5C:4F:EE:87 VLANId:3831 SessionStartTime:2009-7-23,12:9:44.0 Radioid:2 SSIDName:ChinaNet APID:210235A29JB097000001

 

 

在 AC 上查看是否注册成功并获取管理地址：

[AKDX_WX6103_Master] _hidecmd

Now you enter a hidden command view for developer's testing, some commands may

affect operation by wrong use, please carefully use it with our engineer's

direction.

[AKDX_WX6103_Master-hidecmd] dis wlan ap name test_2 ver

                         AP Profile: test_2 

-------------------------------------------------------------------------------

 APID                           : 2

 AP System Name                 : Not Configured

 Map Configuration              : Not Configured

 State                          : Run

 Up Time(hh:mm:ss)              : 00:03:29

 

 Model                          : WA2220X-AGP

 Serial-ID                      : 210235A29JB097000001

 IP Address                     : 10.80.172.163

 

 H/W Version                    : Ver.D

 S/W Version                    : V100R001B58D016

 Boot-Rom Version               : 1.32

 Description                    : Not Configured

 

 

 Connection Type                : Master

 Peer AC MAC Address            : -NA-

 Priority Level                 : 6

 Echo Interval(s)               : 10

 Statistics report Interval(s) : 50

               

 Cir(Kbps)                      : -NA-

 Cbs(Bytes)                     : -NA-

 

 Jumboframe Threshold           : Disable

 

 Transmitted control packets    : 63

 Received control packets       : 63

 Transmitted data packets       : 4599

 Received data packets          : 381

 

 Configuration Failure Count    : -NA-

 Last Failure Reason            : -NA-

 

 Last Reboot Reason             : Normal

 

 Latest Join IP Address         : 10.80.172.163

 Tunnel Down Reason             : No Reason

-------------------------------------------------------------------------------

 AP Mode                        : Split

 AP operation mode              : Normal

 Portal Service                : Disable

 Device Detection               : Disable

 Maximum Number of Radios       : 2

 Current Number of Radios       : 2

 Client Keep-alive Interval     : Disable

 Client Idle Interval(s)        : 3600

 Broadcast-probe Reply Status : Enable

 Radio 1:

   Basic BSSID                 : 0023-8949-3d20

   Current BSS Count           : 0

   Running Clients Count       : 0

   Wireless Mode               : 11a

   Configured Channel          : auto

   Configured Power (dBm)      : 19

   Radio Policy                : default_rp

   Mesh Policy                 : default_mp_plcy

   ANI Support                 : Enable

   Admin State                 : DOWN

   Physical State              : UP

   Operational Rates (Mbps):

     6                         : mandatory

     9                         : supported

     12                        : mandatory

     18                        : supported

     24                        : mandatory

     36                        : supported

     48                        : supported

     54                        : supported

   Radar detected Channels     : None

 Radio 2:

   Basic BSSID                 : 0023-8949-3d30

   Current BSS Count           : 1

   Running Clients Count:

     11g                       : 2

     11b                       : 0

   Wireless Mode               : 11g

   Configured Channel          : auto(1)

   Configured Power (dBm)      : 27

   Interference (%)            : 0

   Channel Load (%)            : 0

   Utilization (%)             : 0

   Co-channel Neighbor Count   : 2

   Channel Health              : Good

   Preamble Type               : short

   Radio Policy                : default_rp

   Service Template            : 1   

     SSID                      : ChinaNet

     Port                      : WLAN-DBSS1:9

   Mesh Policy                 : default_mp_plcy

   ANI Support                 : Enable

   11g Protection              : Disable

   Admin State                 : UP

   Physical State              : UP

   Operational Rates (Mbps):

     1                         : mandatory

     2                         : mandatory

     5.5                       : mandatory

     6                         : supported

     9                         : supported

     11                        : mandatory

     12                        : supported

     18                        : supported

     24                        : supported

     36                        : supported

     48                        : supported

     54                        : supported

   Radar detected Channels     : None

-------------------------------------------------------------------------------

[AKDX_WX6103_Master-hidecmd]