Smokeping初始配置

  3.1修改smokeping相关文件名

在smokeping的子目录中会发现很多“*.dist”命名的文件，这些文件使用的时候请将其改名为“*”并进行配置，可以通过如下命令批量操作：

ls | while read name; do mv ${name} ${name%%.*};done;

3.2建立相关目录

接着建立三个目录用于保存smokeping的数据等，如下所示：

mkdir /usr/local/smokeping/data mkdir /usr/local/smokeping/var mkdir /usr/local/smokeping/cache chown –R apache.apache /usr/local/smokeping

3.3修改配置文件

（1）/usr/local/smokeping/etc/config （somkeping配置基本都在这个文件上）

*** General *** owner = contact = mailhost = my.mail.host sendmail = /usr/lib/sendmail imgcache = /usr/local/smokeping/htdocs/cache imgurl = cache datadir = /data/smokeping/data piddir = /usr/local/smokeping/var cgiurl = http://IP/smokeping/smokeping.cgi smokemail = /usr/local/smokeping/etc/smokemail tmail = /usr/local/smokeping/etc/tmail.dist *** Presentation *** template = /usr/local/smokeping/etc/basepage.html charset = UTF-8

（2）把#*** Slaves ***下的所有东西注释掉，这里暂时不采用master/slave模式。

（3）在Targets下添加监控节点，其中Multi也就是在一张图里画多个监测点的数值：

+ Telecom menu= TeleCom title = 21ViaNet(China)Telecom ++ HeiLJ menu = HeiLJ title = HeiLJ_219.147.130.76 host = 219.147.130.76 ++ JiLin menu = JiLin title = JiLin_219.149.194.1 host = 219.149.194.1 ++ TeleComMulti menu = TeleMulti title = 21ViaNet(China) Telecom Network host = /Telecom/HeiLJ /Telecom/JiLin

（4） /usr/local/smokeping/htdocs/smokeping.cgi 注意修改如下内容即可

#!/usr/bin/speedy –w use lib qw(/usr/local/rrdtool/lib/perl); use lib qw(/usr/local/smokeping/lib); Smokeping::cgi("/usr/local/smokeping/etc/config ");

（5）/usr/local/smokeping/bin/smokeping 注意修改如下内容即可：

#!/usr/bin/perl –w use lib qw(/usr/local/rrdtool/lib/perl); use lib qw(/usr/local/smokeping/lib); Smokeping::main("/usr/local/smokeping/etc/config");

3.4启动smokeping

（1）编写smokeping启动脚本，赋予可执行权限，并放在/etc/init.d目录下

#!/bin/sh PIDFILE=/usr/local/smokeping/var/smokeping.pid SMOKEPING=/usr/local/smokeping/bin/smokeping ERROR=0 RUNNING=0 ARGV="$@" if [ "x$ARGV" = "x" ] ; then ARGS=help fi for ARG in $@ $ARGS do if [ -f $PIDFILE ] ; then PID=`cat $PIDFILE` if kill -0 $PID 2&gt;/dev/null ; then # smokeping is running RUNNING=1 else # smokeping not running but PID file exists =&gt; delete PID file rm -f $PIDFILE RUNNING=0 fi else # smokeping (no pid file) not running RUNNING=0 fi case $ARG in start) if [ $RUNNING -eq 0 ] ; then if $SMOKEPING &gt; /dev/null; then echo "$0 $ARG: smokeping started" else echo "$0 $ARG: smokeping could not be started" ERROR=1 fi else echo "$0 $ARG: smokeping is running with PID $PID" ERROR=2 fi ;; stop) if [ $RUNNING -eq 1 ] ; then if kill $PID ; then echo "$0 $ARG: smokeping ($PID) stopped" rm $PIDFILE else echo "$0 $ARG: smokeping could not be stopped" ERROR=3 fi else echo "$0 $ARG: smokeping not running" ERROR=4 fi ;; restart) if [ $RUNNING -eq 1 ] ; then if $SMOKEPING --restart &gt; /dev/null; then echo "$0 $ARG: smokeping restarted" else echo "$0 $ARG: smokeping could not be started" ERROR=5 fi else $0 start fi ;; strace_debug) rm -f /tmp/strace_smokeping if [ $RUNNING -eq 1 ] ; then if strace -o/tmp/strace_smokeping $SMOKEPING --restart &gt;/dev/null; then echo "$0 $ARG: smokeping restarted with strace debug in /tmp/strace_smokeping" else echo "$0 $ARG: smokeping strace debug could not be started" ERROR=6 fi else if strace -o/tmp/strace_smokeping $SMOKEPING &gt;/dev/null; then echo "$0 $ARG: smokeping started with strace debug in /tmp/strace_smokeping" else echo "$0 $ARG: smokeping strace debug could not be started" ERROR=7 fi fi ;; status) if [ $RUNNING -eq 1 ] ; then echo "$0 $ARG: smokeping is running with PID ($PID)" else echo "$0 $ARG: smokeping is not running" fi ;; *) echo "usage: $0 (start|stop|restart|status|strace_debug|help)" cat <&lt;EOF start - start smokeping stop - stop smokeping restart - restart smokeping if running or start if not running status - show status if smokeping is running or not help - this screen EOF ;; esac done exit $ERROR

（2）检查smokeping配置文件: /usr/local/smokeping/bin/smokeping --check

启动smokeping:service smokeping start

（3）配置apache/conf/httpd.conf

Alias /smokeping/ "/usr/local/smokeping/htdocs/" Alias /cache/ "/usr/local/smokeping/cache/" &lt;Directory "/usr/local/smokeping/htdocs"> Options FollowSymLinks ExecCGI AllowOverride None AddHandler cgi-script cgi Order allow,deny Allow from all </Directory>

（4）修改完后重启apache，在浏览器输入 http://IP/smokeping/smokeping.cgi