使用xtrabackup全部备份与恢复数据库的真实案例

具体关于xtrabackup的备份与恢复，可以参考以下文章

生产环境究竟是使用mysqldump还是xtrabackup来备份与恢复数据库？

http://dl528888.blog.51cto.com/2382721/1153204

下面是一个生产环境的全部备份恢复案例

主要是备份我之前做的php+mysql+shell的monitor数据库，这个数据库的数据文件4.2G

 

4.2G    ibdata1
5.1M    ib_logfile0
5.1M    ib_logfile1
1.8M    monitor

之前一直使用mysqldump备份，但恢复的时候非常的慢，3个小时都恢复不了，所以放弃了使用mysqldump来备份与恢复数据库的方案，改用xtrabackup来备份与恢复。

备份与恢复上面都描述了，下面就列出我恢复4.2G的数据库使用的时间

恢复的日志是

start time is 20130313-13:34:35
start to stop mysql server
start to restore database

InnoDB Backup Utility v1.5.1-xtrabackup; Copyright 2003, 2009 Innobase Oy
and Percona Ireland Ltd 2009-2012.  All Rights Reserved.

This software is published under
the GNU GENERAL PUBLIC LICENSE Version 2, June 1991.

IMPORTANT: Please check that the apply-log run completes successfully.
           At the end of a successful apply-log run innobackupex
           prints "completed OK!".



130313 13:34:35  innobackupex: Starting ibbackup with command: xtrabackup_51  --defaults-file="/usr/local/monitor/data/2013-03-13_13-28-28/backup-my.cnf"  --defaults-group="mysqld" --prepare --target-dir=/usr/local/monitor/data/2013-03-13_13-28-28

xtrabackup_51 version 2.0.5 for MySQL server 5.1.59 unknown-linux-gnu (x86_64) (revision id: undefined)
xtrabackup: cd to /usr/local/monitor/data/2013-03-13_13-28-28
xtrabackup: This target seems to be not prepared yet.
xtrabackup: xtrabackup_logfile detected: size=2097152, start_lsn=(2 31133758)
xtrabackup: Temporary instance for recovery is set as followings.
xtrabackup:   innodb_data_home_dir = ./
xtrabackup:   innodb_data_file_path = ibdata1:10M:autoextend
xtrabackup:   innodb_log_group_home_dir = ./
xtrabackup:   innodb_log_files_in_group = 1
xtrabackup:   innodb_log_file_size = 2097152
xtrabackup: Temporary instance for recovery is set as followings.
xtrabackup:   innodb_data_home_dir = ./
xtrabackup:   innodb_data_file_path = ibdata1:10M:autoextend
xtrabackup:   innodb_log_group_home_dir = ./
xtrabackup:   innodb_log_files_in_group = 1
xtrabackup:   innodb_log_file_size = 2097152
xtrabackup: Starting InnoDB instance for recovery.
xtrabackup: Using 104857600 bytes for buffer pool (set by --use-memory parameter)
InnoDB: The InnoDB memory heap is disabled
130313 13:34:35  InnoDB: Initializing buffer pool, size = 100.0M
130313 13:34:35  InnoDB: Completed initialization of buffer pool
InnoDB: Log scan progressed past the checkpoint lsn 2 31133758
130313 13:34:35  InnoDB: Database was not shut down normally!
InnoDB: Starting crash recovery.
InnoDB: Reading tablespace information from the .ibd files...
InnoDB: Doing recovery: scanned up to log sequence number 2 31272048 (7 %)
130313 13:34:36  InnoDB: Starting an apply batch of log records to the database...
InnoDB: Progress in percents: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99
InnoDB: Apply batch completed
130313 13:34:37  InnoDB: Started; log sequence number 2 31272048

[notice (again)]
  If you use binary log and don't use any hack of group commit,
  the binary log position seems to be:

xtrabackup: starting shutdown with innodb_fast_shutdown = 1
130313 13:34:37  InnoDB: Starting shutdown...
130313 13:34:42  InnoDB: Shutdown completed; log sequence number 2 31272048

130313 13:34:42  innobackupex: Restarting xtrabackup with command: xtrabackup_51  --defaults-file="/usr/local/monitor/data/2013-03-13_13-28-28/backup-my.cnf"  --defaults-group="mysqld" --prepare --target-dir=/usr/local/monitor/data/2013-03-13_13-28-28
for creating ib_logfile*

xtrabackup_51 version 2.0.5 for MySQL server 5.1.59 unknown-linux-gnu (x86_64) (revision id: undefined)
xtrabackup: cd to /usr/local/monitor/data/2013-03-13_13-28-28
xtrabackup: This target seems to be already prepared.
xtrabackup: notice: xtrabackup_logfile was already used to '--prepare'.
xtrabackup: Temporary instance for recovery is set as followings.
xtrabackup:   innodb_data_home_dir = ./
xtrabackup:   innodb_data_file_path = ibdata1:10M:autoextend
xtrabackup:   innodb_log_group_home_dir = ./
xtrabackup:   innodb_log_files_in_group = 2
xtrabackup:   innodb_log_file_size = 5242880
xtrabackup: Temporary instance for recovery is set as followings.
xtrabackup:   innodb_data_home_dir = ./
xtrabackup:   innodb_data_file_path = ibdata1:10M:autoextend
xtrabackup:   innodb_log_group_home_dir = ./
xtrabackup:   innodb_log_files_in_group = 2
xtrabackup:   innodb_log_file_size = 5242880
xtrabackup: Starting InnoDB instance for recovery.
xtrabackup: Using 104857600 bytes for buffer pool (set by --use-memory parameter)
InnoDB: The InnoDB memory heap is disabled
130313 13:34:42  InnoDB: Initializing buffer pool, size = 100.0M
130313 13:34:42  InnoDB: Completed initialization of buffer pool
130313 13:34:42  InnoDB: Log file ./ib_logfile0 did not exist: new to be created
InnoDB: Setting log file ./ib_logfile0 size to 5 MB
InnoDB: Database physically writes the file full: wait...
130313 13:34:42  InnoDB: Log file ./ib_logfile1 did not exist: new to be created
InnoDB: Setting log file ./ib_logfile1 size to 5 MB
InnoDB: Database physically writes the file full: wait...
InnoDB: The log sequence number in ibdata files does not match
InnoDB: the log sequence number in the ib_logfiles!
130313 13:34:42  InnoDB: Database was not shut down normally!
InnoDB: Starting crash recovery.
InnoDB: Reading tablespace information from the .ibd files...
130313 13:34:42  InnoDB: Started; log sequence number 2 31272460

[notice (again)]
  If you use binary log and don't use any hack of group commit,
  the binary log position seems to be:

xtrabackup: starting shutdown with innodb_fast_shutdown = 1
130313 13:34:42  InnoDB: Starting shutdown...
130313 13:34:48  InnoDB: Shutdown completed; log sequence number 2 31272460
130313 13:34:48  innobackupex: completed OK!
operation is success!
operation is success!
start to start mysql server
Starting MySQL:  [  OK  ]
operation is success!
finish time is 20130313-13:34:49

可以看到仅用了14秒就恢复成功。

所以我现在都使用xtrabackup来备份与恢复数据库，下面是我的全部备份与增量备份的脚本

全部备份的脚本xtrabackup_full.sh

[root@beiyong shell]# cat xtrabackup_full.sh
#!/bin/bash
local_ip="$(/sbin/ifconfig eth0|grep 'inet addr'|awk -F : '{print $2}'|cut -d ' ' -f1)"
email='[email protected]'
user='root'
passwd='123456'
database='monitor'
my_config='/etc/my.cnf'
log=$database-$(date +%Y%m%d%H%M).log
str=$database-$(date +%Y%m%d%H%M).tar.gz
backup_dir='/usr/local/monitor/data'
echo "Start to backup at $(date +%Y%m%d%H%M)"
if [ ! -d "$backup_dir" ];then
    mkdir -p $backup_dir
fi
#innobackupex --user=$user --password=$passwd --defaults-file=$my_config --database=$database --stream=tar $backup_dir 2>$backup_dir/$log | gzip 1>$backup_dir/$str
innobackupex --user=$user --password=$passwd --defaults-file=$my_config --database=$database $backup_dir
if [ $? -eq 0 ];then
    echo "Backup is finish! at $(date +%Y%m%d%H%M)"
    echo "Server_name:$(hostname) Server_ip:$local_ip $(date +"%y-%m-%d %H:%M:%S") mysql full backup Success!"|/bin/mail -s "Database: [$database} Daily Full Backup Success!" $email
    exit 0
else
    echo "Backup is Fail! at $(date +%Y%m%d%H%M)"
    echo "Server_name:$(hostname) Server_ip:$local_ip $(date +"%y-%m-%d %H:%M:%S") mysql full backup Fail!"|/bin/mail -s "Database: [$database} Daily Full Backup Fail!" $email
    exit 1
fi
echo "Backup Process Done"

增量备份的脚本xtrabackup_incremental.sh

[root@beiyong shell]# cat xtrabackup_incremental.sh
#!/bin/bash
local_ip="$(/sbin/ifconfig eth0|grep 'inet addr'|awk -F : '{print $2}'|cut -d ' ' -f1)"
email='[email protected]'
user='root'
passwd='123456'
database='monitor'
my_config='/etc/my.cnf'
log=$database-$(date +%Y%m%d%H%M).log
str=$database-$(date +%Y%m%d%H%M).tar.gz
backup_dir='/usr/local/monitor/data/'
last_day=$(date -d "1 days ago" +%Y-%m-%d)
today=$(date +%Y%m%d)
filename=$(find $backup_dir -name "$last_day*" -print|awk -F / '{print $NF}')
echo "Start to backup at $(date +%Y%m%d%H%M)"
if [ ! -d "$backup_dir" ];then
    mkdir -p $backup_dir
fi
#innobackupex --user=$user --password=$passwd --defaults-file=$my_config --database=$database --stream=tar $backup_dir 2>$backup_dir/$log | gzip 1>$backup_dir/$str
innobackupex --user=$user --password=$passwd --defaults-file=$my_config --database=$database --incremental --incremental-basedir=$backup_dir/$filename $backup_dir
if [ $? -eq 0 ];then
    echo "Backup is finish! at $(date +%Y%m%d%H%M)"
    echo "Server_name:$(hostname) Server_ip:$local_ip $(date +"%y-%m-%d %H:%M:%S") mysql incremental backup Success!"|/bin/mail -s "Database: [$database} Daily incremental Backup Success!" $email
    exit 0
else
    echo "Backup is Fail! at $(date +%Y%m%d%H%M)"
    echo "Server_name:$(hostname) Server_ip:$local_ip $(date +"%y-%m-%d %H:%M:%S") mysql incremental backup Fail!"|/bin/mail -s "Database: [$database} Daily incremental Backup Fail!" $email
    exit 1
fi
echo "Backup Process Done"

结合crontab来实现自动的备份

10 00 * * 0 /usr/local/monitor/shell/xtrabackup_full.sh>> /usr/local/monitor/logs/xtrabackup_full.log 2>&1
10 00 * * 1-6 /usr/local/monitor/shell/xtrabackup_incremental.sh>>/usr/local/monitor/logs/xtrabackup_incremental.log 2>&1

每周日的00：10进行全部备份，每周1-6实现增量备份。

备份完成后还能收到邮件提醒

 

 

上面是全部备份邮件提醒

上面是增量备份邮件提醒