华为5100――线路模板脚本

SuiXi5100>enable

SuiXi5100#configure terminal

SuiXi5100(config)#adsl line-profile add  //增加线路模板
[<index>]{2-99}:97  //设置索引号
During input,press 'Q' to quit,then settings at this time are neglected.
  
> Please choose default value type 0-adsl 1-adsl2+(0~1) [0]: 1  //选择模板类型，1代表ADSL2+  
> Will you set basic configuration for modem? (y/n) [n]:y  //进行基本设置  
Note: Setting to these mode of G992.3~5 will lead that the adsl ports that are not support adsl2+ not be activated  
> ADSL operating mode:  
>  0: All(G992.1~5, T1.413)
  
>  1: Full rate(G992.1/3/5 or T1.413)
  
>  2: g.lite(G992.2/4) (ADLI can not support )
  
>  3: T1.413 (ADLI can not support )
  
>  4: g.dmt(G992.1/3/5)
  
>  5: g.hs(G992.1~5, G992.5 is prior)
  
>  6: G992.1
  
>  7: G992.2 (ADLI can not support )
  
>  8: G992.3
  
>  9: G992.4
  
>  10: G992.5
  
>  11: ADSL all(G992.1~2, T1.413)  
Please select  (0~11) [0]: 0  //选择0选项ALL  
> Trellis coding 0-disable 1-enable (0~1) [1]: //默认采用栅格编码                
> Upstream channel bit swap 0-disable 1-enable (0~1) [1]: //开启上行通道交换  
> Downstream channel bit swap 0-disable 1-enable (0~1) [1]: //开启下行通道交换  
> Please select channel mode 0-interleaved 1-fast (0~1) [0]: 0  //默认为交织方式  
> Will you set interleave delay? (y/n) [n]: y  //设置交织延迟  
> Max downstream interleaved delay(0~255 ms) [16]:32 //最大下行延迟  
> Max upstream interleaved delay(0~255 ms) [6]:26 //最大上行延迟  
> Please select form of transmit rate adaptation in downstream: //选择下行速率模式  
> 0-fixed 1-adaptAtStartup 2-adaptAtRuntime (0~2) [1]:2  //运行态自适应模式
> Will you set SNR margin for modem? (y/n) [n]:y //设置modem噪声容限  
> Target SNR margin in downstream (0~15 dB) [6]: 下行目标噪声容限  
> Min SNR margin in downstream (0~6 dB) [0]:  //设置下行最小噪声容限  
> Max SNR margin in downstream (6~31 dB) [31]:// 设置下行最大噪声容限  
> Target SNR margin in upstream (0~15 dB) [6]:  //设置上行噪声容限  
> Min SNR margin in upstream (0~6 dB) [0]: //上行最小容限  
> Max SNR margin in upstream (6~31 dB) [31]://上行最大容限
> Downstream SNR margin for rate downshift (0~6 dB) [0]:
  
> Downstream SNR margin for rate upshift (6~31 dB) [6]:
  
> Upstream SNR margin for rate downshift (0~6 dB) [0]:
  
> Upstream SNR margin for rate upshift (6~31 dB) [6]:
  
> Will you set shifttime? (y/n) [n]:
  
> Will you set parameters for rate? (y/n) [n]: y //设置速率参数
> Min bit rate in downstream (32~32000 Kbps) [32]: 64
  
> Max bit rate in downstream (64~32000 Kbps) [32000]:
  
> Min bit rate in upstream (32~3000 Kbps) [32]:
  
> Max bit rate in upstream (32~3000 Kbps) [3000]: 1000
  Add profile 97 successfully

SuiXi5100(config)#eixt
  Incorrect command:eixt
SuiXi5100(config)#q
  Incorrect command:q
SuiXi5100(config)#exit

SuiXi5100#save    
2008/11/23 11:34:38 minor  LAN: Not enough IGMP pvc(0/13)
Are you sure to save system data?(y/n) [y]: