天要讲的是
linux
下
php
扩展的入门篇
下面我来讲讲如何作一个
php
的扩展
首先要有一个搭建好的
php
环境
我把
php
的安装在了
/usr/local/php
当然也通过
php
的一个配置
php.ini
的路径但是要注意了
用这种方法安装的
php
扩展不能实现
我们在
php
安装以后的
/usr/local/php/bin
目录
找到这个文件
phpize
稍后我们将用到他
他就是个
shell
脚本你可以用
vi phpize
来查看他的内容
但是你要注意了这个脚本不是在哪里都可以应用的
[root@ns root]# phpize
Cannot find config.m4.
Make sure that you run '/usr/local/bin/phpize' in the top level source directory of the module
[root@ns root]# phpize
Cannot find config.m4.
Make sure that you run '/usr/local/bin/phpize' in the top level source directory of the module
你会看到这两种结果实际上你查看了这个脚本
很轻松的就会发现是怎么来处理的
你的模扩展的时候最好
放在
/usr/local/src/php-4.3.5/ext
下
来执行他你在这里也可以这样
/usr/local/php/bin/phpize
来执行也可以
phpize
来执行
我们在
/usr/local/src/php-4.3.5/ext
下找到这个工具
来建立一个
php
扩展的一个框架
[root@ns ext]#cd /usr/local/src/php-4.3.5/ext/
[root@ns ext]# ./ext_skel --extname=jinzhesheng_module
Creating directory jinzhesheng_module
Creating basic files: config.m4 .cvsignore jinzhesheng_module.c php_jinzhesheng_module.h CREDITS EXPERIMENTAL tests/001.phpt jinzhesheng_module.php [done].
To use your new extension, you will have to execute the following steps:
1. $ cd ..
2. $ vi ext/jinzhesheng_module/config.m4
3. $ ./buildconf
4. $ ./configure --[with|enable]-jinzhesheng_module
5. $ make
6. $ ./php -f ext/jinzhesheng_module/jinzhesheng_module.php
7. $ vi ext/jinzhesheng_module/jinzhesheng_module.c
8. $ make
执行了这个步骤以后你会看到这样的结果
Repeat steps 3-6 until you are satisfied with ext/jinzhesheng_module/config.m4 and
step 6 confirms that your module is compiled into PHP. Then, start writing
code and repeat the last two steps as often as necessary.
这样以后我们会在这个目录下生成一个目录叫
jinzhesheng_module
进入这里面我们看看
[root@ns ext]# cd jinzhesheng_module/
[root@ns jinzhesheng_module]# ls
config.m4 EXPERIMENTAL jinzhesheng_module.php tests
CREDITS jinzhesheng_module.c php_jinzhesheng_module.h
然后我们要修改文件顺序是
configue.m4
jinzhesheng_module.c
php_jinzhesheng_module.h
使用文本编辑器打开
config.m4
文件,文件内容大致如下:
dnl $Id$d
dnl config.m4 for extension my_module
dnl don't forget to call PHP_EXTENSION(my_module)
dnl Comments in this file start with the string 'dnl'.
dnl Remove where necessary. This file will not work
dnl without editing.
dnl If your extension references something external, use with:
dnl PHP_ARG_WITH(my_module, for my_module support,
dnl Make sure that the comment is aligned:
dnl [ --with-my_module Include my_module support])
dnl Otherwise use enable:
dnl PHP_ARG_ENABLE(my_module, whether to enable my_module support,
dnl Make sure that the comment is aligned:
dnl [ --enable-my_module Enable my_module support])
if test "$PHP_MY_MODULE" != "no"; then
dnl If you will not be testing anything external, like existence of
dnl headers, libraries or functions in them, just uncomment the
dnl following line and you are ready to go.
dnl Write more examples of tests here...
PHP_EXTENSION(my_module, $ext_shared)
Fi
根据你自己的选择将
dnl PHP_ARG_WITH(my_module, for my_module support,
dnl Make sure that the comment is aligned:
dnl [ --with-my_module Include my_module support])
修改成
PHP_ARG_WITH(my_module, for my_module support,
Make sure that the comment is aligned:
[ --with-my_module Include my_module support])
或者将
dnl PHP_ARG_ENABLE(my_module, whether to enable my_module support,
dnl Make sure that the comment is aligned:
dnl [ --enable-my_module Enable my_module support])
修改成
PHP_ARG_ENABLE(my_module, whether to enable my_module support,
Make sure that the comment is aligned:
[ --enable-my_module Enable my_module support])
我这里用了后者
然后保存退出
然后在编辑
Vi my_module.c
将文件其中的下列代码进行修改
/* Every user visible function must have an entry in my_module_functions[].
*/
function_entry my_module_functions[] = {
PHP_FE(say_hello, NULL) /* ?
添加着一行代码
*/
PHP_FE(confirm_my_module_compiled, NULL) /* For testing, remove later. */
{NULL, NULL, NULL} /* Must be the last line in my_module_functions[] */
};
在文件的最后添加下列代码
PHP_FUNCTION(say_hello)
{
zend_printf("hello world\n");
}
保存文件退出
然后我们就可以在这个目录下使用上面的命令了
/usr/local/php/bin/phpize
执行以后会看到下面的
[root@ns jinzhesheng_module]# /usr/local/php/bin/phpize
Configuring for:
PHP Api Version: 20020918
Zend Module Api No: 20020429
Zend Extension Api No: 20050606
[root@ns jinzhesheng_module]#
然后执行
./configure --enable-jinzhesheng_module --with-apxs=/usr/local/apache/bin/apxs --with-php-config=/usr/local/php/bin/php-config
我们在安装以后的
php
的
bin
目录下的可以找到这个文件的
php-config
和
phpize
这一步骤一定要注意你的
apache
的
apxs
放在哪里了
然后执行
make
你会看到出现错误了你重新定义了函数我们前面的
这个你在回头改一下这个文件把原来的函数删除掉在生成的文件里面会有同样的函数
你在加入你的代码
就可以通过了
这个时候会在当前的目录下生成一个目录叫
modules
他的下面就放着你要的
jinzhesheng_module.so
文件
cp modules/jinzhesheng_module.so /usr/local/php/ext/
这里需要你先设置你的
php
的扩展目录的在
在
php.ini
里面
通过
extension_dir
最后一不是你在
php.ini
文件中打开这个扩展
extension=jinzhesheng_module.so
然后
重新起动
apache
用
phpinfo
来察看一下
ok
了