华为Ar28-80和H3C Ar18路由器配置PPPoE拨号上网

#   

//创建dialer-rule 1

dialer-rule 1 ip permit  

#

//配置进行NAT的ACL

acl number 2000

rule 0 permit source 192.168.1.0 0.0.0.255

#

//创建dialer 1

interface Dialer1

link-protocal ppp

//引用ACL 2000进行Easy IP NAT

nat outbound 2000

//用来认证的ADSL帐号和密码

ppp chap user hgw1

ppp chap password simple hgw

// IP地址通过PPP协商获取

ip address ppp-negotiate

dialer user hgw1

dialer-group 1

dialer bundle 1

#

//将Ethernet0/0绑定到dialer 1口

interface Ethernet0/0

port link-mode route

pppoe-client dial-bundle-number 1

#

//配置dialer 1作为默认路由出口

ip route-static 0.0.0.0 0.0.0.0 Dialer 1 preference 60

 

H3C 18-22 路由器pppoe配置文档和配置详解

所在视图	依次键入以下命令	命令说明
<Quidway>	system-view	进入系统视图
[Quidway]	dialer-rule 1 ip permit	创建dialer-rule 1
[Quidway]	acl number 2000	创建访问控制列表
[Quidway-acl-basic-2000]	rule 0 permit source 192.168.1.0 0.0.0.255	配置允许nat转换的网段
[Quidway-acl-basic-2000]	rule 1 deny
[Quidway-acl-basic-2000]	quit
[Quidway]	interface Dialer1	进入dialer口
[Quidway-Dialer1]	ppp chap user huawei3com	Adsl拔号的用户名，由运营商提供
[Quidway-Dialer1]	ppp chap password simple huawei3com	Adsl拔号的密码，由运营商提供
[Quidway-Dialer1]	ppp pap local-user huawei3com password simple huawei3com	Adsl拔号的用户名和密码，由运营商提供
[Quidway-Dialer1]	tcp mss 1024	Tcp的最大分片单元
[Quidway-Dialer1]	ip address ppp-negotiate	IP地址通过PPP协商获取
[Quidway-Dialer1]	dialer user huawei3com
[Quidway-Dialer1]	dialer-group 1	引用dialer-rule 1
[Quidway-Dialer1]	dialer bundle 1
[Quidway-Dialer1]	nat outbound 2000
[Quidway-Dialer1]	quit
[Quidway]	interface Ethernet1/0	进入到lan口
[Quidway-Ethernet1/0]	ip address 192.168.1.1 255.255.255.0	配置lan口地址
[Quidway-Ethernet1/0]	quit
[Quidway]	interface Ethernet2/0	进入WAN0口
[Quidway-Ethernet2/0]	pppoe-client dial-bundle-number 1	将dialer 1口绑定到WAN口
[Quidway-Ethernet2/0]	quit
[Quidway]	ip route-static 0.0.0.0 0.0.0.0 Dialer 1 preference 60	配置dialer 1作为默认路由出口
[Quidway]	quit
<Quidway>	save	保存配置