Git - Tutorial官方

转自：http://www.vogella.com/tutorials/Git/article.html#git_rename_branch

 

Lars Vogel

 

Version 5.8

 

Copyright © 2009-2015 vogella GmbH

10.08.2015

Git Tutorial

This tutorial explains the usage of the distributed version control system Git via the command line. The examples were done on Linux (Ubuntu), but should also work on other operating systems like Microsoft Windows.

GET THE BOOK!

1. Git

1.1. What is a version control system?

A version control system (VCS) allows you to track the history of a collection of files. It supports creating different versions of this collection. Each version captures a snapshot of the files at a certain point in time and the VCS allows you to switch between these versions. These versions are stored in a specific place, typically called a repository.

You may, for example, revert the collection of files to a state from 2 days ago. Or you may switch between versions of your files for experimental features.

The process of creating different versions (snapshots) in the repository is depicted in the following graphic. Please note that this picture fits primarily to Git. Other version control systems like Concurrent Versions System (CVS) don't create snapshots but store file deltas.

 

 

VCS are typically used to track changes in source code for a programming language or other text files, like HTML code or configuration files. But a typical version control system can put any type of file under version control, e.g., you may use a VCS to track the different versions of your company logo.

1.2. Localized and centralized version control systems

A localized version control system keeps local copies of the files. This approach can be as simple as creating a manual copy of the relevant files. A centralized version control system provides a server software component which stores and manages the different versions of the files and let developer copy (checkout) a certain version onto their individual computer.

Both approaches have the drawback that they have only one single point of failure, e.g., in localized version control systems the individual computer and in a centralized version control systems the server machine. Both system makes it also harder to work in parallel on different features.

1.3. What is a distributed version control system?

In a distributed version control system each user has a complete local copy of a repository on his individual computer. The user can copy an existing repository. This copying process is typically called cloning and the resulting repository can be referred to as a clone.

Every clone contains the full history of the collection of files and a cloned repository has the same functionality as the original repository.

Every repository can exchange versions of the files with other repositories by transporting these changes. This is typically done via a repository running on a server which is, unlike the local machine of a developer, always online. Typically there is a central server for keeping a repository but each cloned repository is a full copy of this repository. The decision which of the copies is considered to be the central server repository is pure convention and not tied to the capabilities of the distributed version control system itself.

 

 

1.4. What is Git?

Git is currently the most popular implementation of a distributed version control system.

Git originates from the Linux kernel development and was founded in 2005 by Linus Torvalds. Nowadays it is used by many popular open source projects, e.g., the Android or the Eclipse developer teams, as well as many commercial organizations.

The core of Git was originally written in the programming language C, but Git has also been re-implemented in other languages, e.g., Java, Ruby and Python.

2. Tools

2.1. The Git command line tools

The original tooling for Git is based on the command line, i.e., the Git development team provides only tooling for the command line. Most of the following examples are based on the Git command line tooling which offers all capabilities of Git.

2.2. Separating parameters and file arguments in Git commands

The double hyphens (--) in Git separates out any references or other options from a path (usually file names). For example HEAD has a special meaning in Git. Using double hyphens llows you to distinguish between looking at a file called HEAD from a Git commit reference called HEAD.

In case Git can determine the correct parameters and options automatically the double hyphens can be avoided.

 

# seeing the git log for the HEAD file
git log --HEAD

# seeing the git log for the HEAD reference
git log HEAD -- # if there is no HEAD file you can use HEAD as commit reference git log HEAD 

 

2.3. Graphical tools for Git

You can also use graphical tools see GUI Clients at the official git website for an overview.

For example the Eclipse IDE provides excellent support for working with Git repositories.

To learn more about the Git integration into Eclipse see the Eclipse Git online tutorial or the Eclipse IDE book.

3. Important terminology in Git

3.1. Cloning, creating and deleting a Git repository

The process of copying an existing Git repository is called cloning. After cloning a repository the user has the complete repository with its history on his local machine. Of course, Git also supports the creation of new repositories.

If you want to delete a Git repository, you can simply delete the folder which contains the repository.

3.2. Bare repositories and non-bare repositories

If you clone a Git repository, by default, Git assumes that you want to work in this repository as a user. Git also supports the creation of repositories targeting the usage on a server.

• bare repositories are supposed to be used on a server for sharing changes coming from different developers. Such repositories do not allow the user to modify locally files and to create new versions for the repository based on these modifications.

• non-bare repositories target the user. They allow you to create new changes through modification of files and to create new versions in the repository. This is the default type which is created if you do not specify any parameter during the clone operation.

 

A local non-bare Git repository is typically called local repository.

3.3. Working tree

A local repository provides at least one collection of files which originate from a certain version of the repository. This collection of files is called the working tree. It corresponds to a checkout of one version of the repository with potential changes done by the user.

The user can change the files in the working tree by modifying existing files and by creating and removing files. Afterwards he can add these changes to the repository.

3.4. Local operations

Once the user has his local repository, he can perform modify files in his working tree and perform version control operations. For example he can create new versions for the files in his Git repository, revert the files to another version stored in the repository, etc.

3.5. Synchronization with remote repositories

Git allows the user to synchronize the local repository with other (remote) repositories.

Users with sufficient authorization can send new version in their local repository to to remote repositories via the push operation. They can also integrate changes from other repositories into their local repository via the fetch and pull operation.

3.6. The concept of branches

Git supports branching which means that you can work on different versions of your collection of files. A branch separates these different versions and allows the user to switch between these versions to work on them.

For example, if you want to develop a new feature, you can create a branch and make the changes in this branch without affecting the state of your files in another branch.

Branches in Git are local to the repository. A branch created in a local repository, which was cloned from another repository, does not need to have a counterpart in the remote repository. Local branches can be compared with other local branches and with remote-tracking branches. A remote-tracking branch proxies the state of a branch in another remote repository.

Git supports the combination of changes from different branches. This allows the developer, for example, to work independently on a branch called production for bugfixes and another branch called feature_123 for implementing a new feature. The developer can use Git commands to combine the changes at a later point in time.

For example, the Linux kernel community used to share code corrections (patches) via mailing lists to combine changes coming from different developers. Git is a system which allows developers to automate such a process.

4. The process of adding to a Git repository via staging and committing

4.1. Adding changes to a Git repository

If you modify your working tree (see Section 3.3, “Working tree”) you need to perform two steps to persist these changes in your local repository. You

• add selected changes to the something called the staging area and

• afterwards you commit the changes stored in the staging area to the repository

 

This process is depicted in the following graphic.

 

 

4.2. Adding to the staging area

You need to mark changes in the working tree to be relevant for Git. This process is called staging or to add changes to the staging area.

You add changes in the working tree to the staging area with the git add command. This command stores a snapshot of the specified files in the staging area.

The git add command allows you to incrementally modify files, stage them, modify and stage them again until you are satisfied with your changes.

Older versions of Git used the term index instead of staging area. Staging area is nowadays the preferred term by the Git community. Both terms mean the same thing.

4.3. Committing to the repository

After adding the selected files to the staging area, you can commit these files to add them permanently to the Git repository. Committing creates a new persistent snapshot (called commit or commit object) of the staging area in the Git repository. A commit object, like all objects in Git, is immutable.

The staging area keeps track of the snapshots of the files until the staged changes are committed.

For committing the staged changes you use the git commit command.

4.4. Committing changes

If you commit changes to your Git repository, you create a new commit object in the Git repository. See Section 5.1, “Commit object (commit)” for information about the commit object.

5. The details of the commit objects

5.1. Commit object (commit)

Conceptually a commit object (short:commit) represents a version of all files tracked in the repository at the time the commit was created. Commits know their parent(s) and this way capture the version history of the repository.

5.2. Technical details of a commit object

This commit object is addressable via a hash (SHA-1 checksum). This hash is calculated based on the content of the files, the content of the directories, the complete history of up to the new commit, the committer, the commit message, and several other factors.

This means that Git is safe, you cannot manipulate a file or the commit message in the Git repository without Git noticing that corresponding hash does not fit anymore to the content.

The commit object points to the individual files in this commit via a tree object. The files are stored in the Git repository as blob objects and might be packed by Git for better performance and more compact storage. Blobs are addressed via their SHA-1 hash.

Packing involves storing changes as deltas, compression and storage of many objects in a single pack file. Pack files are accompanied by one or multiple index files which speedup access to individual objects stored in these packs.

A commit object is depicted in the following picture.

 

 

The above picture is simplified. Tree objects point to other tree objects and file blobs. Objects which didn't change between commits are reused by multiple commits.

5.3. Hash and abbreviated commit hash

A Git commit object is identified by its hash (SHA-1 checksum). SHA-1 produces a 160-bit (20-byte) hash value. A SHA-1 hash value is typically rendered as a hexadecimal number, 40 digits long.

In a typical Git repository you need fewer characters to uniquely identify a commit object. As a minimum you need 4 characters and in a typical Git repository 5 or 6 are sufficient. This short form is called the abbreviated commit hash or abbreviated hash. Sometimes it is also called the shortened SHA-1 or abbreviated SHA-1.

Several commands, e.g., the git log command can be instructed to use the shortened SHA-1 for their output.

6. Summary of Git terminology

6.1. Reference table with important Git terminology

The following table provides a summary of important Git terminology.

Table 1. Important Git terminology

Term	Definition
Branch	A branch is a named pointer to a commit. Selecting a branch in Git terminology is called to checkout a branch. If you are working in a certain branch, the creation of a new commit advances this pointer to the newly created commit. Each commit knows their parents (predecessors). Successors are retrieved by traversing the commit graph starting from branches or other refs, symbolic references (for example: HEAD) or explicit commit objects. This way a branch defines its own line of descendants in the overall version graph formed by all commits in the repository. You can create a new branch from an existing one and change the code independently from other branches. One of the branches is the default (typically named master). The default branch is the one for which a local branch is automatically created when cloning the repository.
Commit	When you commit your changes into a repository this creates a new commit objectin the Git repository. This commit object uniquely identifies a new revision of the content of the repository. This revision can be retrieved later, for example, if you want to see the source code of an older version. Each commit object contains the author and the committer, thus making it possible to identify who did the change. The author and committer might be different people. The author did the change and the committer applied the change to the Git repository. This is common for contributions to open source projects.
HEAD	HEAD is a symbolic reference most often pointing to the currently checked out branch. Sometimes the HEAD points directly to a commit object, this is called detached HEAD mode. In that state creation of a commit will not move any branch. If you switch branches, the HEAD pointer points to the branch pointer which in turn points to a commit. If you checkout a specific commit, the HEAD points to this commit directly.
Index	Index is an alternative term for the staging area.
Repository	A repository contains the history, the different versions over time and all different branches and tags. In Git each copy of the repository is a complete repository. If the repository is not a bare repository, it allows you to checkout revisions into your working tree and to capture changes by creating new commits. Bare repositories are only changed by transporting changes from other repositories. This book uses the term repository to talk about a non-bare repository. If it talks about a bare repository, this is explicitly mentioned.
Revision	Represents a version of the source code. Git implements revisions as commit objects (or short commits). These are identified by an SHA-1 hash.
Staging area	The staging area is the place to store changes in the working tree before the commit. The staging area contains a snapshot of the changes in the working tree (changed or new files) relevant to create the next commit and stores their mode (file type, executable bit).
Tag	A tag points to a commit which uniquely identifies a version of the Git repository. With a tag, you can have a named point to which you can always revert to. You can revert to any point in a Git repository, but tags make it easier. The benefit of tags is to mark the repository for a specific reason, e.g., with a release. Branches and tags are named pointers, the difference is that branches move when a new commit is created while tags always point to the same commit. Tags can have a timestamp and a message associated with them.
URL	A URL in Git determines the location of the repository. Git distinguishes betweenfetchurl for getting new data from other repositories and pushurl for pushing data to another repository.
Working tree	The working tree contains the set of working files for the repository. You can modify the content and commit the changes as new commits to the repository.

6.2. File states in the working tree

A file in the working tree of a Git repository can have different states. These states are the following:

• untracked: the file is not tracked by the Git repository. This means that the file never staged nor committed.

• tracked: committed and not staged

• staged: staged to be included in the next commit

• dirty / modified: the file has changed but the change is not staged

 

7. Commit references

7.1. Predecessor commits, parents and commit references

Each commit has zero or more direct predecessor commits. The first commit has zero parents, merge commits have two or more parents, most commits have one parent.

 

 

In Git you typically need to address certain commits. For example you want to tell Git to show you all changes which were done in the last three commits. Or you want to see the differences introduced between two different branches.

Git allows addressing commits via commit reference for this purpose.

A commit reference can be a simple reference (simple ref), in this case it points directly to a commit. This is the case for a commit hash or a tag. A commit reference can also be symbolic reference (symbolic ref, symref). In this case it points to another reference (either simple or symbolic). For example HEAD is a symbolic ref for a branch, if it points to a branch. HEAD points to the branch pointer and the branch pointer points to a commit.

 

7.2. Branch references and the HEAD reference

A branch points to a specific commit. You can use the branch name as reference to the corresponding commit. You can also use HEAD to reference the corresponding commit.

7.3. Parent and ancestor commits

You can use ^ (caret) and ~ (tilde) to reference predecessor commit objects from other references. You can also combine the ^ and ~ operators. See Section 7.4, “Using caret and tilde for commit references” for their usage.

The Git terminology is parent for ^ and ancestor for ~.

7.4. Using caret and tilde for commit references

[reference]~1 describes the first predecessor of the commit object accessed via [reference]. [reference]~2 is the first predecessor of the first predecessor of the [reference] commit. [reference]~3 is the first predecessor of the first predecessor of the first predecessor of the [reference] commit, etc.

[reference]~ is an abbreviation for [reference]~1.

For example, you can use the HEAD~1 or HEAD~ reference to access the first parent of the commit to which the HEAD pointer currently points.

[reference]^1 also describes the first predecessor of the commit object accessed via [reference].

For example HEAD^^^ is the same as HEAD~~~ and is the same as HEAD~3.

The difference is that [reference]^2 describes the second parent of a commit. A merge commit typically has two predecessors. HEAD^3 means ‘the third parent of a merge’ and in most cases this won’t exist (merges are generally between two commits, though more is possible).

 

 

[reference]^ is an abbreviation for [reference]^1.

7.5. Commit ranges with the double dot operator

You can also specify ranges of commits. This is useful for certain Git commands, for example, for seeing the changes between a series of commits.

The double dot operator allows you to select all commits which are reachable from a commit c2 but not from commit c1. The syntax for this is "c1..c2". A commit A is reachable from another commit B if A is a direct or indirect parent of B.

Tip

 

Think of c1..c2 as all commits as of c1 (not including c1) until commit c2.

For example, you can ask Git to show all commits which happened between HEAD and HEAD~4.

 

git log HEAD~4..HEAD 

 

This also works for branches. To list all commits which are in the "master" branch but not in the "testing" branch, use the following command.

 

git log testing..master 

 

You can also list all commits which are in the "testing" but not in the "master" branch.

 

git log master..testing 

 

7.6. Commit ranges with the triple dot operator

The triple dot operator allows you to select all commits which are reachable either from commit c1 or commit c2 but not from both of them.

This is useful to show all commits in two branches which have not yet been combined.

 

# show all commits which 
# can be reached by master or testing
# but not both
git log master...testing 

 

8. Installation

8.1. Ubuntu, Debian and derived systems

On Ubuntu and similar systems you can install the Git command line tool via the following command:

 

sudo apt-get install git 

 

8.2. Fedora, Red Hat and derived systems

On Fedora, Red Hat and similar systems you can install the Git command line tool via the following command:

 

dnf install git 

 

8.3. Other Linux systems

To install Git on other Linux distributions please check the documentation of your distribution. The following listing contains the commands for the most popular ones.

 

# Arch Linux
sudo pacman -S git

# Gentoo 
sudo emerge -av git

# SUSE 
sudo zypper install git 

 

8.4. Windows

A Windows version of Git can be found on the Git download page. This website provides native installers for each operating system. The homepage of the Windows Git project is git for window.

8.5. Mac OS

The easiest way to install Git on a Mac is via the Git download page and to download and run the installer for Mac OS X.

Git is also installed by default with the Apple Developer Tools on Mac OS X.

9. Different levels of Git configuration

9.1. Git configuration levels

The git config command allows you to configure your Git settings. These settings can be system wide, user or repository specific.

A more specific setting overwrites values in the previous level, i.e., a setting the repository overrides the user setting and a user setting overrides a system wide setting.

9.2. Git system-wide configuration

You can provide a system wide configuration for your Git settings. A system wide configuration is not very common, most settings are user specific or repository specific as described in the next chapters.

On a Unix based system Git uses the /etc/gitconfig file for this system-wide configuration. To set this up, ensure you have sufficient rights, i.e. root rights, in your OS and use the --system option for the git config command.

9.3. Git user configuration

Git allows you to store user settings in the .gitconfig file located in the user home directory. This is also called the global Git configuration.

For example Git stores the committer and author of a change in each commit. This and additional information can be stored in the Git user settings.

In each Git repository you can also configure the settings for this repository. User configuration is done if you include the --global option in the git config command.

9.4. Repository specific configuration

You can also store repository specific settings in the .git/config file of a repository. Use the --local or use no flag at all. If neither the --system not the --global parameter is used, the setting is specific for the current Git repository.

10. Performing the Git configuration

10.1. User configuration

You have to configure at least your user and email address to be able to commit to a Git repository because this information is stored in each commit.

10.2. Exercise: User configuration

Configure your user and email for Git via the following command.

 

# configure the user which will be used by Git
# this should be not an acronym but your full name
git config --global user.name "Firstname Lastname" # configure the email address git config --global user.email "[email protected]" 

 

10.3. Push configuration

If your are using Git in a version below 2.0 you should also execute the following command.

 

# set default so that only the current branch is pushed
git config --global push.default simple 

 

This configures Git so that the git push command pushes only the active branch (in case it is connected to a remote branch, i.e., configured as remote-tracking branches) to your Git remote repository. As of Git version 2.0 this is the default and therefore it is good practice to configure this behavior.

You learn about the push command in Section 21.1, “Push changes to another repository”.

10.4. Avoid merge commits for pulling

If you pull in changes from a remote repository, Git by default creates merge commits if you pull in divergent changes. This may not be desired and you can avoid this via the following setting.

 

# set default so that you avoid unnecessary commits
git config --global branch.autosetuprebase always 

 

Note

 

This setting depends on the individual workflow. Some teams prefer to create merge commits, but the author of this book likes to avoid them.

10.5. Color Highlighting

The following commands enables color highlighting for Git in the console.

 

git config --global color.ui auto 

 

10.6. Setting the default editor

By default Git uses the system default editor which is taken from the VISUAL or EDITOR environment variables if set. You can configure a different one via the following setting.

 

# setup vim as default editor for Git (Linux)
git config --global core.editor vim 

 

10.7. Setting the default merge tool

File conflicts might occur in Git during an operation which combines different versions of the same files. In this case the user can directly edit the file to resolve the conflict.

Git allows also to configure a merge tool for solving these conflicts. You have to use third party visual merge tools like tortoisemerge, p4merge, kdiff3 etc. A Google search for these tools help you to install them on your platform. Keep in mind that such tools are not required, you can always edit the files directly in a text editor.

Once you have installed them you can set your selected tool as default merge tool with the following command.

 

# setup kdiff3 as default merge tool (Linux)
git config --global merge.tool kdiff3

# to install it under Ubuntu use
sudo apt-get install kdiff3 

 

10.8. More settings

All possible Git settings are described under the following link: git-config manual page

10.9. Query Git settings

To query your Git settings, execute the following command:

 

git config --list 

 

If you want to query the global settings you can use the following command.

 

git config --global --list 

 

11. Configure files and directories to ignore

11.1. Ignoring files and directories with a .gitignore file

Git can be configured to ignore certain files and directories for repository operations. This is configured via one or several .gitignore files. Typically, this file is located at the root of your Git repository but it can also be located in sub-directories. In the second case the defined rules are only valid for the sub-directory and below.

You can use certain wildcards in this file. * matches several characters. More patterns are possible and described under the following URL: gitignore manpage

For example, the following .gitignore file tells Git to ignore the bin and target directories and all files ending with a ~.

 

# ignore all bin directories
# matches "bin" in any subfolder
bin/

# ignore all target directories
target/

# ignore all files ending with ~
*~ 

 

You can create the .gitignore file in the root directory of the working tree to make it specific for the Git repository.

Tip

 

The .gitignore file tells Git to ignore the specified files in Git commands. You can still add ignored files to the staging area of the Git repository by using the --force parameter, i.e. with the git add --force [paths] command. 

This is useful if you want to add, for example, auto-generated binaries, but you need to have a fine control about the version which is added and want to exclude them from the normal workflow.

It is good practice to commit the local .gitignore file into the Git repository so that everyone who clones this repository has it.

11.2. Global (cross-repository) .gitignore settings

You can also setup a global .gitignore file valid for all Git repositories via the core.excludesfile setting. The setup of this setting is demonstrated in the following code snippet.

 

# Create a ~/.gitignore in your user directory
cd ~/
touch .gitignore # Exclude bin and .metadata directories echo "bin" >> .gitignore echo ".metadata" >> .gitignore echo "*~" >> .gitignore echo "target/" >> .gitignore # for Mac echo ".DS_Store" >> .gitignore echo "._*" >> .gitignore # Configure Git to use this file # as global .gitignore git config --global core.excludesfile ~/.gitignore 

 

The global .gitignore file is only locally available.

11.3. Local per-repository ignore rules

You can also create local per-repository rules by editing the .git/info/exclude file in your repository. These rules are not committed with the repository so they are not shared with others.

This allows you to exclude, for example, locally generated files.

12. Git and empty directories

12.1. Default behaviour of Git for empty directories

Git ignores empty directories, i.e., it does not put them under version control.

12.2. Tracking empty directories

If you want to track an empty directory in your Git repository, it is a good practice to put a file called .gitignore in the directory. As the directory now contains a file, Git includes it into its version control mechanism.

Note

 

The file could be called anything. Others sources recommend to call the file .gitkeep. One problem with this approach is that .gitkeep is unlikely to be ignored by build systems, resulting in the .gitkeep file being copied to the output repository.

13. Create repository

13.1. Target of this chapter

In this chapter you create a local Git repository. The comments (marked with #) before the commands explain the specific actions.

Open a command shell for the operations.

13.2. Create a directory

The following commands create an empty directory which is used later in this exercise to contain the working tree and the Git repository.

 

# switch to home
cd

# create a directory and switch into it
mkdir repo01 cd repo01 # create a new directory mkdir datafiles 

 

13.3. Create a new Git repository

The following explanation is based on a non-bare repository. See Section 6.1, “Reference table with important Git terminology” for the difference between a bare repository and a non-bare repository with a working tree.

Every Git repository is stored in the .git folder of the directory in which the Git repository has been created. This directory contains the complete history of the repository. The.git/config file contains the configuration for the repository.

The following command creates a Git repository in the current directory.

 

# you should still be in the repo01 directory
cd ~/repo01

# initialize the Git repository
# for the current directory
git init 

 

All files inside the repository folder excluding the .git folder are the working tree for a Git repository.

14. Getting started with Git

14.1. Target of this chapter

In this chapter you create several files and place them under version control.

14.2. Create new content

Use the following commands to create several new files.

 

# switch to your Git repository
cd ~/repo01

# create an empty file in a new directory
touch datafiles/data.txt # create a few files with content ls > test01 echo "bar" > test02 echo "foo" > test03 

 

14.3. See the current status of your repository

The git status command shows the working tree status, i.e. which files have changed, which are staged and which are not part of the staging area. It also shows which files have conflicts and gives an indication what the user can do with these changes, e.g., add them to the staging area or remove them, etc.

Run it via the following command.

 

git status 

 

The output looks similar to the following listing.

 

On branch master

Initial commit

Untracked files:
  (use "git add <file>..." to include in what will be committed)

    datafiles/
    test01
    test02
    test03

nothing added to commit but untracked files present (use "git add" to track) 

 

14.4. Add files to the staging area

Before committing changes to a Git repository you need to mark the changes that should be committed. This is done by adding the new and changed files to the staging area. This creates a snapshot of the affected files.

 

# add all files to the index of the Git repository
git add . 

 

Afterwards run the git status command again to see the current status.

 

On branch master

Initial commit

Changes to be committed:
  (use "git rm --cached <file>..." to unstage)

    new file:   datafiles/data.txt
    new file:   test01
    new file:   test02
    new file:   test03 

 

14.5. Change files that are staged

In case you change one of the staged files before committing, you need to add it again to the staging area to commit the new changes. This is because Git creates a snapshot of these staged files. All new changes must again be staged.

 

# append a string to the test03 file
echo "foo2" >> test03 # see the result git status 

 

Validate that the new changes are not yet staged.

 

On branch master

Initial commit

Changes to be committed:
  (use "git rm --cached <file>..." to unstage)

    new file:   datafiles/data.txt
    new file:   test01
    new file:   test02
    new file:   test03

Changes not staged for commit: (use "git add <file>..." to update what will be committed) (use "git checkout -- <file>..." to discard changes in working directory) modified: test03 

 

Add the new changes to the staging area.

 

# add all files to the index of the Git repository
git add . 

 

Use the git status command again to see that all changes are staged.

 

On branch master

Initial commit

Changes to be committed:
  (use "git rm --cached <file>..." to unstage)

    new file:   datafiles/data.txt
    new file:   test01
    new file:   test02
    new file:   test03 

 

14.6. Commit staged changes to the repository

After adding the files to the Git staging area, you can commit them to the Git repository. This creates a new commit object with the staged changes in the Git repository and the HEAD reference points to the new commit. The -m parameter allows you to specify the commit message. If you leave this parameter out, your default editor is started and you can enter the message in the editor.

 

# commit your file to the local repository
git commit -m "Initial commit" 

 

15. Looking at the result

15.1. Viewing the Git commit history

The Git operations you performed have created a local Git repository in the .git folder and added all files to this repository via one commit. Run the git log command (SeeSection 30.1, “Using git log” for details).

 

# show the Git log for the change
git log 

 

You see an output similar to the following.

 

commit 30605803fcbd507df36a3108945e02908c823828
Author: Lars Vogel <[email protected]>
Date:   Mon Dec 1 10:43:42 2014 +0100 Initial commit 

 

15.2. Directory structure

Your directory contains the Git repository as well as the Git working tree for your files. This directory structure is depicted in the following screenshot.

 

 

16. Remove files and adjust the last commit

16.1. Remove files

If you delete a file you use the git add . command to add the deletion of a file to the staging area. This is supported as of Git version 2.0.

 

# remove the "test03" file
rm test03
# add and commit the removal
git add . # if you use Git version < 2.0 use: git add -A . git commit -m "Removes the test03 file" 

 

Alternatively you can use the git rm command to delete the file from your working tree and record the deletion of the file in the staging area.

16.2. Revert changes in files in the working tree

Use the git checkout command to reset a tracked file (a file that was once staged or committed) to its latest staged or commit state. The command removes the changes of the file in the working tree. This command cannot be applied to files which are not yet staged or committed.

 

echo "useless data" >> test02 echo "another unwanted file" >> unwantedfile.txt # see the status git status # remove unwanted changes from the working tree # CAREFUL this deletes the local changes in the tracked file git checkout test02 # unwantedstaged.txt is not tracked by Git simply delete it rm unwantedfile.txt 

 

If you use git status command to see that there are no changes left in the working directory.

 

On branch master
nothing to commit, working directory clean 

 

Warning

 

Use this command carefully. The git checkout command deletes the unstaged and uncommitted changes of tracked files in the working tree and it is not possible to restore this deletion via Git.

16.3. Correct the last commit with git amend

The git commit --amend command makes it possible to replace the last commit. This allows you to change the last commit including the commit message.

Note

 

The amended commit is still available until a clean-up job removes it. See Section 44.2, “git reflog” for details.

Assume the last commit message was incorrect as it contained a typo. The following command corrects this via the --amend parameter.

 

# assuming you have something to commit
git commit -m "message with a tpyo here" 

 

 

# amend the last commit
git commit --amend -m "More changes - now correct" 

 

You should use the git --amend command only for commits which have not been pushed to a public branch of another Git repository. The git --amend command creates a new commit ID and people may have based their work already on the existing commit. In this case they would need to migrate their work based on the new commit.

17. Ignoring certain files and directories

17.1. Ignore files and directories with the .gitignore file

Git allows you to define pattern for files which should not be tracked by the Git repository. Create the following .gitignore file in the root of your Git directory to ignore the specified directory and file.

 

cd ~/repo01
touch .gitignore echo ".metadata/" >> .gitignore echo "doNotTrackFile.txt" >> .gitignore 

 

Tip

The above command creates the file via the command line. A more common approach is to use your favorite text editor to create the file. This editor must save the file as plain text, e.g., gedit under Ubuntu or Notepad under Windows.

The resulting file looks like the following listing.

 

.metadata/
doNotTrackFile.txt 

 

17.2. Stop tracking files based on the .gitignore file

Files that are tracked by Git are not automatically removed if you add them to a .gitignore file. Git never ignores files which are already tracked, so changes in the .gitignorefile only affect new files. If you want to ignore files which are already tracked you need to explicitly remove them.

The following command demonstrates how to remove the .metadata directory and the doNotTrackFile.txt file from being tracked. This is example code, as you did not commit the corresponding files in your example, the command will not work in your Git repository.

 

# remove directory .metadata from git repo
git rm -r --cached .metadata
# remove file test.txt from repo
git rm --cached doNotTrackFile.txt 

 

Adding a file to the .gitignore file does not remove the file from the repository history. If the file should also be removed from the history, have a look at git filter-branchwhich allows you to rewrite the commit history. See Section 62.1, “Using git filter-branch” for details.

17.3. Commit the .gitignore file

It is good practice to commit the .gitignore file into the Git repository. Use the following commands for this.

 

# add the .gitignore file to the staging area
git add .gitignore
# commit the change
git commit -m "Adds .gitignore file" 

 

18. Remote repositories

18.1. What are remotes?

Remotes are URLs in a Git repository to other remote repositories that are hosted on the Internet, locally or on the network.

Such remotes can be used to synchronize the changes of several Git repositories. A local Git repository can be connected to multiple remote repositories and you can synchronize your local repository with them via Git operations.

Note

 

Think of remotes as shorter bookmarks for repositories. You can always connect to a remote repository if you know its URL and if you have access to it. Without remotes the user would have to type the URL for each and every command which communicates with another repository.

It is possible that users connect their individual repositories directly, but a typically Git workflow involves one or more remote repositories which are used to synchronize the individual repository. Typically the remote repository which is used for synchronization is located on a server which is always available.

 

 

Tip

 

A remote repository can also be hosted in the local file system.

18.2. Bare repositories

A remote repository on a server typically does not require a working tree. A Git repository without a working tree is called a bare repository. You can create such a repository with the --bare option. The command to create a new empty bare remote repository is displayed below.

 

# create a bare repository
git init --bare 

 

By convention the name of a bare repository should end with the .git extension.

To create a bare Git repository in the Internet you would, for example, connect to your server via the SSH protocol or you use some Git hosting platform, e.g., GitHub.com.

18.3. Convert a Git repository to a bare repository

Converting a normal Git repository to a bare repository is not directly support by Git.

You can convert it manually by moving the content of the .git folder into the root of the repository and by removing all others files from the working tree. Afterwards you need to update the Git repository configuration with the git config core.bare true command.

As this is officially not supported, you should prefer cloning a repository with the --bare option.

19. Cloning repositories and the remote called "origin"

19.1. Cloning a repository

The git clone command copies an existing Git repository. This copy is a working Git repository with the complete history of the cloned repository. It can be used completely isolated from the original repository.

19.2. The remote called "origin"

If you clone a repository, Git implicitly creates a remote named origin by default. The origin remote links back to the cloned repository.

If you create a Git repository from scratch with the git init command, the origin remote is not created automatically.

19.3. Exercise: Cloning to create a bare Git repository

In this section you create a bare Git repository. In order to simplify the following examples, the Git repository is hosted locally in the filesystem and not on a server in the Internet.

Execute the following commands to create a bare repository based on your existing Git repository.

 

# switch to the first repository
cd ~/repo01

# create a new bare repository by cloning the first one
git clone --bare . ../remote-repository.git # check the content of the git repo, it is similar # to the .git directory in repo01 # files might be packed in the bare repository ls ~/remote-repository.git 

 

Tip

 

If you receive a warning similar to the following: push.default is unset; its implicit value is changing in Git 2.0 from 'matching' to 'simple', seeSection 10.3, “Push configuration” for the missing configuration.

20. Adding and listing existing remotes

20.1. Adding a remote repository

You add as many remotes to your repository as desired. For this you use the git remote add command.

You created a new Git repository from scratch earlier. Use the following command to add a remote to your new bare repository using the origin name.

 

# add ../remote-repository.git with the name origin
git remote add origin ../remote-repository.git 

 

20.2. Synchronizing with remote repositories

You can synchronize your local Git repository with remote repositories. These commands are covered in detail in later sections but the following command demonstrates how you can send changes to your remote repository.

 

# do some changes
echo "I added a remote repo" > test02 # commit git commit -a -m "This is a test for the new remote origin" # to push use the command: # git push [target] # default for [target] is origin git push origin 

 

20.3. Show the existing remotes

To see the existing definitions of the remote repositories, use the following command.

 

# show the details of the remote repo called origin
git remote show origin 

 

To see the details of the remotes, e.g., the URL use the following command.

 

# show the existing defined remotes
git remote

# show details about the remotes
git remote -v 

 

21. The push and pull commands

21.1. Push changes to another repository

The git push command allows you to send data to other repositories. By default it sends data from your current branch to the same branch of the remote repository.

By default you can only push to bare repositories (repositories without working tree). Also you can only push a change to a remote repository which results in a fast-forward merge. See Section 48.1, “Fast-forward merge” to learn about fast-forward merges.

See Section 24.6, “Push changes of a branch to a remote repository” for details on pushing branches or the Git push manpage for general information.

21.2. Pull changes

The git pull command allows you to get the latest changes from another repository for the current branch.

The git pull command is actually a shortcut for git fetch followed by the git merge or the git rebase command depending on your configuration. In Section 10.4, “Avoid merge commits for pulling” you configured your Git repository so that git pull is a fetch followed by a rebase. See Section 46.1, “Fetch” for more information about the fetch command.

21.3. Exercise: Clone your bare repository

In this exercise you create a Git repository based on the bare repository you created in Section 19.3, “Exercise: Cloning to create a bare Git repository”.

Clone a repository and checkout a working tree in a new directory via the following commands.

 

# switch to home
cd ~
# make new directory
mkdir repo02 # switch to new directory cd ~/repo02 # clone git clone ../remote-repository.git . 

 

21.4. Exercise: Using the push command

Make some changes in your local repository and push them from your first repository to the remote repository via the following commands.

 

# make some changes in the first repository
cd ~/repo01

# make some changes in the file
echo "Hello, hello. Turn your radio on" > test01 echo "Bye, bye. Turn your radio off" > test02 # commit the changes, -a will commit changes for modified files # but will not add automatically new files git commit -a -m "Some changes" # push the changes git push ../remote-repository.git 

 

21.5. Exercise: Using the pull command

To test the git pull in your example Git repositories, switch to your second repository, pull in the recent changes from the remote repository, make some changes, push them to your remote repository via the following commands.

 

# switch to second directory
cd ~/repo02

# pull in the latest changes of your remote repository
git pull # make changes echo "A change" > test01 # commit the changes git commit -a -m "A change" # push changes to remote repository # origin is automatically created as we cloned original from this repository git push origin 

 

You can pull in the changes in your first example repository with the following commands.

 

# switch to the first repository and pull in the changes
cd ~/repo01

git pull ../remote-repository.git/ # check the changes git status 

 

22. Working with remote repositories

22.1. Cloning remote repositories

Git supports several transport protocols to connect to other Git repositories; the native protocol for Git is also called git.

The following command clones an existing repository using the Git protocol. The Git protocol uses the port 9148 which might be blocked by firewalls.

 

# switch to a new directory
mkdir ~/online
cd ~/online # clone online repository git clone git://github.com/vogella/gitbook.git 

 

If you have SSH access to a Git repository, you can also use the ssh protocol. The name preceding @ is the user name used for the SSH connection.

 

# clone online repository
git clone ssh://[email protected]/vogella/gitbook.git # older syntax git clone [email protected]:vogella/gitbook.git 

 

Alternatively you could clone the same repository via the http protocol.

 

# the following will clone via HTTP
git clone http://github.com/vogella/gitbook.git 

 

22.2. Add more remote repositories

As discussed earlier cloning repository creates a remote called origin pointing to the remote repository which you cloned from. You can push changes to this repository viagit push as Git uses origin as default. Of course, pushing to a remote repository requires write access to this repository.

You can add more remotes via the git remote add [name] [URL_to_Git_repo] command. For example, if you cloned the repository from above via the Git protocol, you could add a new remote with the name github_http for the http protocol via the following command.

 

# add the HTTPS protocol
git remote add github_http https://[email protected]/vogella/gitbook.git 

 

22.3. Rename remote repositories

To rename an existing remote repository use the git remote rename command. This is demonstrated by the following listing.

 

# rename the existing remote repository from 
# github_http to github_testing
git remote rename github_http github_testing 

 

22.4. Remote operations via HTTP

It is possible to use the HTTP protocol to clone Git repositories. This is especially helpful if your firewall blocks everything except HTTP or HTTPS.

 

git clone http://git.eclipse.org/gitroot/platform/eclipse.platform.ui.git 

 

For secured SSL encrypted communication you should use the SSH or HTTPS protocol in order to guarantee security.

22.5. Using a proxy

Git also provides support for HTTP access via a proxy server. The following Git command could, for example, clone a repository via HTTP and a proxy. You can either set the proxy variable in general for all applications or set it only for Git.

The following listing configures the proxy via environment variables.

 

# Linux and Mac
export http_proxy=http://proxy:8080 export https_proxy=https://proxy:8443 # Windows set http_proxy http://proxy:8080 set https_proxy http://proxy:8080 git clone http://git.eclipse.org/gitroot/platform/eclipse.platform.ui.git 

 

The following listing configures the proxy via Git config settings.

 

# set proxy for git globally
git config --global http.proxy http://proxy:8080 # to check the proxy settings git config --get http.proxy # just in case you need to you can also revoke the proxy settings git config --global --unset http.proxy 

 

Tip

 

Git is able to store different proxy configurations for different domains, see core.gitProxy in Git config manpage.

23. What are branches?

Git allows you to create branches, i.e. named pointers to commits. You can work on different branches independently from each other. The default branch is most often calledmaster.

A branch pointer in Git is 41 bytes large, 40 bytes of characters and an additional new line character. Therefore, the creating of branches in Git is very fast and cheap in terms of resource consumption. Git encourages the usage of branches on a regular basis.

If you decide to work on a branch, you checkout this branch. This means that Git populates the working tree with the version of the files from the commit to which the branch points and moves the HEAD pointer to the new branch.

As explained in Section 6.1, “Reference table with important Git terminology” HEAD is a symbolic reference usually pointing to the branch which is currently checked out.

24. Commands to working with branches

24.1. List available branches

The git branch command lists all local branches. The currently active branch is marked with *.

 

# lists available branches
git branch 

 

If you want to see all branches (including remote-tracking branches), use the -a for the git branch command. See Section 45.1, “Remote tracking branches” for information about remote-tracking branches.

 

# lists all branches including the remote branches
git branch -a 

 

The -v option lists more information about the branches.

In order to list branches in a remote repository use the git branch -r command as demonstrated in the following example.

 

# lists branches in the remote repositories 
git branch -r 

 

24.2. Create new branch

You can create a new branch via the git branch [newname] command. This command allows to specify the starting point (commit id, tag, remote or local branch). If not specified the commit to which the HEAD reference points is used to create the branch.

 

# syntax: git branch <name> <hash>
# <hash> in the above is optional
git branch testing 

 

24.3. Checkout branch

To start working in a branch you have to checkout the branch. If you checkout a branch, the HEAD pointer moves to the last commit in this branch and the files in the working tree are set to the state of this commit.

The following commands demonstrate how you switch to the branch called testing, perform some changes in this branch and switch back to the branch called master.

 

# switch to your new branch
git checkout testing

# do some changes
echo "Cool new feature in this branch" > test01 git commit -a -m "new feature" # switch to the master branch git checkout master # check that the content of # the test01 file is the old one cat test01 

 

To create a branch and to switch to it at the same time you can use the git checkout command with the -b parameter.

 

# create branch and switch to it
git checkout -b bugreport12

# creates a new branch based on the master branch
# without the last commit
git checkout -b mybranch master~1 

 

24.4. Rename a branch

Renaming a branch can be done with the following command.

 

# rename branch
git branch -m [old_name] [new_name] 

 

24.5. Delete a branch

To delete a branch which is not needed anymore, you can use the following command. You may get an error message that there are uncommited changes if you did the previous examples step by step. Use force delete (uppercase -D) to delete it anyway.

 

# delete branch testing
git branch -d testing
# force delete testing
git branch -D testing # check if branch has been deleted git branch 

 

24.6. Push changes of a branch to a remote repository

You can push the changes in the current active branch to a remote repository by specifying the target branch. This creates the target branch in the remote repository if it does not yet exist.

 

# push current branch to a branch called "testing" to remote repository
git push origin testing

# switch to the testing branch
git checkout testing # some changes echo "News for you" > test01 git commit -a -m "new feature in branch" # push all including branch git push 

 

This way you can decide which branches you want to push to other repositories and which should be local branches. You learn more about branches and remote repositories inSection 45.1, “Remote tracking branches”.

25. Differences between branches

To see the difference between two branches you can use the following command.

 

# shows the differences between
# current head of master and your_branch

git diff master your_branch 

 

You can also use commit ranges as described in Section 7.5, “Commit ranges with the double dot operator” and Section 7.6, “Commit ranges with the triple dot operator”. For example, if you compare a branch called your_branch with the master branch the following command shows the changes in your_branch and master since these branches diverged.

 

# shows the differences in your
# branch based on the common
# ancestor for both branches

git diff master...your_branch 

 

See Section 31, “Viewing changes with git diff and git show” for more examples of the git diff command.

26. Tags in Git

26.1. What are tags?

Git has the option to tag a commit in the repository history so that you find it easier at a later point in time. Most commonly, this is used to tag a certain version which has been released.

If you tag a commit, you create an annotated or lightweight tag.

26.2. Lightweight and annotated tags

Git supports two different types of tags, lightweight and annotated tags.

A lightweight tag is a pointer to a commit, without any additional information about the tag. An annotated tag contains additional information about the tag, e.g., the name and email of the person who created the tag, a tagging message and the date of the tagging. Annotated tags can also be signed and verified with GNU Privacy Guard (GPG).

26.3. Naming conventions for tags

Tags are frequently used to tag the state of a release of the Git repository. In this case they are typically called release tags.

Convention is that release tags are labeled based on the [major].[minor].[patch] naming scheme, for example "1.0.0". Several projects also use the "v" prefix.

The idea is that the patch version is incremented if (only) backwards compatible bug fixes are introduced, the minor version is incremented if new, backwards compatible functionality is introduced to the public API and the major version is incremented if any backwards incompatible changes are introduced to the public API.

For the detailed discussion on naming conventions please see the following URL: Semantic versioning.

27. Working with tags

27.1. List tags

You can list the available tags via the following command:

 

git tag 

 

27.2. Search by pattern for a tag

You can use the -l parameter in the git tag command to search for a pattern in the tag.

 

git tag -l <pattern> 

 

27.3. Creating lightweight tags

To create a lightweight tag don't use the -m, -a or -s option.

The term build describes the conversion of your source code into another state, e.g., converting Java sources to an executable JAR file. Lightweight tags in Git are often used to identify the input for a build. Frequently this does not require additional information other than a build identifier or the timestamp.

 

# create lightweight tag
git tag 1.7.1 # see the tag git show 1.7.1 

 

27.4. Creating annotated tags

You can create a new annotated tag via the git tag -a command. An annotated tag can also be created using the -m parameter, which is used to specify the description of the tag. The following command tags the current active HEAD.

 

# create tag
git tag 1.6.1 -m 'Release 1.6.1' # show the tag git show 1.6.1 

 

You can also create tags for a certain commit id.

 

git tag 1.5.1 -m 'version 1.5' [commit id] 

 

27.5. Creating signed tags

You can use the option -s to create a signed tag. These tags are signed with GNU Privacy Guard (GPG) and can also be verified with GPG. For details on this please see the following URL: Git tag manpage.

27.6. Checkout tags

If you want to use the code associated with the tag, use:

 

git checkout <tag_name> 

 

Warning

 

If you checkout a tag, you are in the detached head mode and commits created in this mode are harder to find after you checkout a branch again. See Section 44.1, “Detached HEAD” for details.

27.7. Push tags

By default the git push command does not transfer tags to remote repositories. You explicitly have to push the tag with the following command.

 

# push a tag or branch called tagname
git push origin [tagname]

# to explicitly push a tag and not a branch 
git push origin tag <tagname> # push all tags git push --tags 

 

27.8. Delete tags

You can delete tags with the -d parameter. This deletes the tag from your local repository. By default Git does not push tag deletions to a remote repository, you have to trigger that explicitly.

The following commands demonstrate how to push a tag deletion.

 

# delete tag locally
git tag -d 1.7.0 # delete tag in remote repository # called origin git push origin :refs/tags/1.7.0 

 

28. Listing changed files before a commit

28.1. Listing changed files

The git status command shows the status of the working tree, i.e., which files have changed, which are staged and which are not part of the staging area. It also shows which files have merge conflicts and gives an indication what the user can do with these changes, e.g., add them to the staging area or remove them, etc.

28.2. Example: Using git status

The following commands create some changes in your Git repository.

 

# make some changes
# assumes that the test01 
# as well as test02 files exist
# and have been committed in the past 
echo "This is a new change to the file" > test01 echo "and this is another new change" > test02 # create a new file ls > newfileanalyzis.txt 

 

The git status command shows the current status of your repository and suggests possible actions which the user can perform.

 

# see the current status of your repository 
# (which files are changed / new / deleted)
git status 

 

The output of the command looks like the following listing.

 

# On branch master
# Your branch is ahead of 'origin/master' by 1 commit.
#   (use "git push" to publish your local commits)
#
# Changes not staged for commit:
#   (use "git add <file>..." to update what will be committed)
#   (use "git checkout -- <file>..." to discard changes in working directory)
#
#  modified:   test01
#  modified:   test02
#
# Untracked files:
#   (use "git add <file>..." to include in what will be committed)
#
#  newfileanalyzis.txt
no changes added to commit (use "git add" and/or "git commit -a") 

 

29. Reviewing the changes in the files before a commit

29.1. See the differences in the working tree since the last commit

The git diff command allows seeing the changes in the working tree compared to the last commit.

29.2. Example: Using "git diff" to see the file changes in the working tree

In order to test this, make some changes to a file and check what the git diff command shows to you. Afterwards commit the changes to the repository.

 

# make some changes to the file
echo "This is a change" > test01 echo "and this is another change" > test02 # check the changes via the diff command git diff # optional you can also specify a path to filter the displayed changes # path can be a file or directory git diff [path] 

 

29.3. See differences between staging area and last commit

To see which changes you have staged, i.e., you are going to commit with the next commit, use the following command.

 

# make some changes to the file
git diff --cached 

 

30. Analyzing the commit history with git log

30.1. Using git log

The git log command shows the history of your repository in the current branch, i.e., the list of commits.

 

# show the history of commits in the current branch
git log 

 

30.2. Helpful parameters for git log

The --oneline parameter fits the output of the git log command in one line.

If you use the --abbrev-commit parameter, the git log command uses shorter versions of the SHA-1 identifier for a commit object but keeps the SHA-1 unique. This parameter uses 7 characters by default, but you can specify other numbers, e.g., --abbrev-commit --abbrev=4.

The graph parameter draws a text-based graphical representation of the branches and the merge history of the Git repository.

 

# uses shortend but unique SHA-1 values 
# for the commit objects 
git log --abbrev-commit

# show the history of commits in one line
# with a shortened version of the commit id
# --online is a shorthand for "--pretty=oneline --abbrev-commit" 
git log --oneline # show the history as graph including branches git log --graph --oneline 

 

For more options on the git log command see the Git log manpage.

30.3. View the change history of a file

To see changes in a file you can use the -p option in the git log command.

 

# git log filename shows the commits for this file
git log [file path]

# Use -p to see the diffs of each commit
git log -p filename # --follow shows the entire history # including renames git log --follow -p file 

 

30.4. Configuring output format

You can use the --pretty parameter to configure the output.

 

# command must be issued in one line, do not enter the line break
git log --pretty=format:'%Cred%h%Creset %d%Creset %s %Cgreen(%cr) %C(bold blue)<%an>%Creset' --abbrev-commit 

 

This command creates the output.

 

 

You can define an alias for such a long command. See Section 58.1, “Using an alias” for information how to define an alias.

30.5. Filtering based on the commit message via regular expressions

You can filter the output of the git log command to commits whose commit message, , or reflog entry, respectively, matches the specified regular expression pattern with the--grep=<pattern> and --grep-reflog=<pattern> option.

For example the following command instructs the log command to list all commits which contain the word "workspace" in their commit message.

 

# oneline parameter included for better readability
git log --oneline --grep="workspace" 

 

There is also the --invert-grep=<pattern> option. When this option is used, git log lists the commits that don't match the specified pattern.

30.6. Filtering the log output based on author or committer

You can use the --author=<pattern> or --committer=<pattern> to filter the log output by author or committer. You do not need to use the full name, if a substring matches, the commit is included in the log output.

The following command lists all commits with an author name containing the word "lvogel".

 

git log --author=lvogel 

 

See also Section 35, “git shortlog for release announcements”.

31. Viewing changes with git diff and git show

31.1. See the differences introduced by a commit

To see the changes introduced by a commit use the following command.

 

git show <commit_id> 

 

31.2. See the difference between two commits

To see the differences introduced between two commits you use the git diff command specifying the commits. For example, the following command shows the differences introduced in the last commit.

 

# directly between two commits
git diff HEAD~1 HEAD # using commit ranges git diff HEAD~1..HEAD 

 

31.3. See the files changed by a commit

To see the files which have been changed in a commit use the git diff-tree command. The name-only tells the command to show only the names of the files.

 

git diff-tree --name-only -r <commit_id> 

 

32. Analyzing line changes with git blame

The git blame command allows you to see which commit and author modified a file on a per line base.

That is very useful to identify the person or the commit which introduced a change.

33. Example: git blame

The following code snippet demonstrates the usage of the git blame command.

 

# git blame shows the author and commit per 
# line of a file
git blame [filename]

# the -L option allows limiting the selection
# for example by line number

# only show line 1 and 2 in git blame
git blame -L 1,2 [filename] 

 

The git blame command can also ignore whitespace changes with the -w parameter.

34. Commit history of a repository or certain files

Gitk can be used to visualize the history of a repository of certain files.

In some cases simply using git blame is not sufficient in order to see all details of certain changes. Therefore you can for exmaple navigate to the filelocation in the target git repository and use the gitk [filename] command to see all commits of a file in a clear UI.

In this screenshot we can see all commits of the ShowViewHandler.java by using the gitk ShowViewHandler.java command:

 

 

On linux you can easily install gitk by using the sudo apt-get install gitk command in a terminal.

See http://git-scm.com/docs/gitk for further information.

35. git shortlog for release announcements

The git shortlog command summarizes the git log output, it groups all commits by author and includes the first line of the commit message.

The -s option suppresses the commit message and provides a commit count. The -n option sorts the output based on the number of commits by author.

 

# gives a summary of the changes by author
git shortlog

# compressed summary
# -s summary, provides a commit count summary only
# -n sorted by number instead of name of the author
git shortlog -sn 

 

This command also allows you to see the commits done by a certain author or committer.

 

# see the commits by the author "Lars Vogel"
git shortlog --author="Lars Vogel" # see the commits by the author "Lars Vogel"  # restricted by the last years git shortlog --author="Lars Vogel" --since=2years # see the number of commits by the author "Lars Vogel"  git shortlog -s --author="Lars Vogel" --since=2years 

 

36. Stashing committed changes with git stash

36.1. Stashing changes in Git

36.1.1. The git stash command

Git provides the git stash command which allows you to record the current state of the working directory and the staging area and to revert to the last committed revision.

This allows you to pull in the latest changes or to develop an urgent fix. Afterwards you can restore the stashed changes, which will reapply the changes to the current version of the source code.

36.1.2. When to use git stash

In general using the stash command should be the exception in using Git. Typically, you would create new branches for new features and switch between branches. You can also commit frequently in your local Git repository and use interactive rebase to combine these commits later before pushing them to another Git repository.

Even if you prefer not to use branches, you can avoid using the git stash command. In this case you commit the changes you want to put aside and amend the commit with the next commit. If you use the approach of creating a commit, you typically put a marker in the commit message to mark it as a draft, e.g., "[DRAFT] implement feature x".

36.2. Using the Git stash command

36.2.1. Example: Using the git stash command

The following commands will save a stash and reapply them after some changes.

 

# create a stash with uncommitted changes
git stash

# do changes to the source, e.g., by pulling
# new changes from a remote repo

# afterwards, re-apply the stashed changes
# and delete the stash from the list of stashes
git stash pop 

 

It is also possible to keep a list of stashes.

 

# create a stash with uncommitted changes
git stash save 

# see the list of available stashes
git stash list # result might be something like: stash@{0}: WIP on master: 273e4a0 Resize issue in Dialog stash@{1}: WIP on master: 273e4b0 Silly typo in Classname stash@{2}: WIP on master: 273e4c0 Silly typo in Javadoc # you can use the ID to apply a stash git stash apply stash@{0} # or apply the latest stash and delete it afterwards git stash pop # you can also remove a stashed change # without applying it git stash drop stash@{0} # or delete all stashes git stash clear 

 

36.2.2. Create a branch from a stash

You can also create a branch for your stash if you want to continue to work on the stashed changes in a branch. This can be done with the following command.

 

# create a new branch from your stack and 
# switch to it
git stash branch newbranchforstash 

 

37. Remove untracked files with git clean

37.1. Removing untracked files

If you have untracked files in your working tree which you want to remove, you can use the git clean command.

Warning

 

Be careful with this command. All untracked files are removed if you run this command. You will not be able to restore them, as they are not part of your Git repository.

37.2. Example: Using git clean

The following commands demonstrate the usage of the git clean command.

 

# create a new file with content
echo "this is trash to be deleted" > test04 # make a dry-run to see what would happen # -n is the same as --dry-run  git clean -n # delete, -f is required if  # variable clean.requireForce is not set to false git clean -f # use -d flag to delete new directories # use -x to delete hidden files, e.g., ".example" git clean -fdx 

 

38. Revert uncommitted changes in tracked files

38.1. Use cases

If you have a tracked file in Git, you can always recreate the file content based on the staging area or based on a previous commit. You can also remove staged changes from the staging area to avoid that these changes are included in the next commit. This chapter explain you how you can do this.

38.2. Remove staged changes from the staging area

You can use the git reset [paths] command to remove staged changes from the staging area. This means that git reset [paths] is the opposite of git add [paths]. It avoids that the changes are included in the next commit. The changes are still available in the working tree, e.g., you will not lose your changes and can stage and commit them at a later point.

In the following example you create a new file and change an existing file. Both changes are staged.

 

# do changes 
touch unwantedstaged.txt
echo "more.." >> test02 // add changes to staging area git add unwantedstaged.txt git add test02 # see the status git status 

 

The output of git status command should look similar to the following.

 

On branch master
Changes to be committed:
  (use "git reset HEAD <file>..." to unstage)

    modified:   test02
    new file:   unwantedstaged.txt 

 

Remove the changes from the staging area with the following command.

 

# remove test02 from the staging area
git reset test02

# remove unwantedstaged.txt from the staging area
git reset unwantedstaged.txt 

 

Use the git status command to see the result.

 

On branch master
Changes not staged for commit:
  (use "git add <file>..." to update what will be committed) (use "git checkout -- <file>..." to discard changes in working directory) modified: test02 Untracked files: (use "git add <file>..." to include in what will be committed) unwantedstaged.txt no changes added to commit (use "git add" and/or "git commit -a") 

 

The git reset behaves differently depending on the options you provide. To learn more about the git reset command see Section 39, “Use cases for git reset”.

38.3. Remove changes in the working tree

Warning

 

Be careful with the following command. It allows you to override the changes in files in your working tree. You will not be able to restore these changes.

Changes in the working tree which are not staged can be undone with git checkout command. This command resets the file in the working tree to the latest staged version. If there are no staged changes, the latest committed version is used for the restore operation.

 

# delete a file
rm test01

# revert the deletion
git checkout -- test01 # note git checkout test01 also works but using # two - ensures that Git understands that test01  # is a path and not a parameter # change a file echo "override" > test01 # restore the file git checkout -- test01 

 

For example, you can restore the content of a directory called data with the following command.

 

git checkout -- data 

 

38.4. Remove changes in the working tree and the staging area

If you want to undo a staged but uncommitted change, you use the git checkout [commit-pointer] [paths] command. This version of the command resets the working tree and the staged area.

The following demonstrates the usage of this to restore a delete directory.

 

# create a demo directory
mkdir checkoutheaddemo
touch checkoutheaddemo/myfile git add . git commit -m "Adds new directory" # now delete the directory and add the change to # the staging area rm -rf checkoutheaddemo # Use git add . -A for Git version < 2.0  git add . # restore the working tree and reset the staging area git checkout HEAD -- your_dir_to_restore 

 

The additional commit pointer parameter instructs the git checkout command to reset the working tree and to also remove the staged changes.

38.5. Remove staging area based on last commit change

When you have added the changes of a file to the staging area, you can also revert the changes in the staging area base on the last commit.

 

# some nonsense change
echo "change which should be removed later" > test01 # add the file to the staging area git add test01 # restores the file based on HEAD in the staging area git reset HEAD test01 

 

39. Use cases for git reset

39.1. Moving the HEAD and branch pointer

Sometimes you want to change the commmit your branch pointer is pointing to. The git reset command allows you to manually set the current HEAD pointer (and its associated branch) to a specified commit. This is for example useful to undo a particular change or to build up a different commit history.

 

 

All commits which were originally pointed to by the HEAD pointer and the commit pointed to by HEAD after the reset, are reseted, e.g., not directly visible anymore from the current HEAD and branch pointer.

Via parameters you can decide what you happen to the changes in the working tree and changes which were included in the commits between the original commit and the commit now referred to by the HEAD pointer. As a reminder, the working tree contains the files and the staging area contains the changes which are marked to be included in the next commit. Depending on the specified parameters the git reset command performs the following:

1. If you specify the --soft parameter, the git reset command moves the HEAD pointer. Changes in the working tree will be left unchanged and all changes which were commited included in commits which are reseted are staged.

2. If you specify the --mixed parameter (the default), the git reset command moves the HEAD pointer and resets the staging area to the new HEAD. Any file change between the original commit and the one you reset to shows up as modifications (or untracked files) in your working tree. Use this option to remove commits but keep all the work you have done. You can do additional changes, stage changes and commit again. This way you can build up a different commit history.

3. If you specify the --hard parameter, the git reset command moves the HEAD pointer and resets the staging area and the working tree to the new HEAD. This effectively removes the changes you have done between the original commit and the one you reset to.

 

Via parameters you can define if the staging area and the working tree is updated. These parameters are listed in the following table.

 

Table 2. git reset options

Reset	Branch pointer	Working tree	Staging area
soft	Yes	No	No
mixed (default)	Yes	No	Yes
hard	Yes	Yes	Yes

 

The git reset command does not remove untracked files. Use the git clean command for this.

39.2. Not moving the HEAD pointer with git reset

If you specify a path via the git reset [path] command , Git does not move the HEAD pointer. It updates the staging area or also the working tree depending on your specified option.

40. Resetting changes with git reset

40.1. Finding commits that are no longer visible on a branch

If you reset the branch pointer of a branch to a certain commit, the git log commands does not show the commits which exist after this branch pointer. For example assume you have two commits A-> B, where B is the commit after A. You if you reset your branch pointer to A, the git log command does not include B anymore.

Commits like B can still be found via the git reflog command. See Section 44, “Recovering lost commits”.

40.2. Deleting changes in the working tree and staging area for tracked files

The git reset --hard command makes the working tree exactly match HEAD.

 

# removes staged and working tree changes
# of committed files
git reset --hard 

 

Warning

 

If you have tracked files with modifications, you lose these changes with the above command.

Note

 

The reset command does not delete untracked files. If you want to delete them also see Section 37.1, “Removing untracked files”.

40.3. Using git reset to squash commits

As a soft reset does not remove your change to your files and index, you can use the git reset --soft command to squash several commits into one commit.

As the staging area is not changed with a soft reset, you keep it in the desired state for your new commit. This means that all the file changes from the commits which were reseted are still part of the staging area.

 

# squashes the last two commits
git reset --soft HEAD~1 && git commit -m "new commit message" 

 

The interactive rebase adds more flexibility to squashing commits and allows to use the existing commit messages. See ??? for details.

41. Retrieving files from the history

41.1. View file in different revision

The git show command allows to see and retrieve files from branches, commits and tags. It allows seeing the status of these files in the selected branch, commit or tag without checking them out into your working tree.

By default, this command addresses a file from the root of the repository, not the current directory. If you want the current directory then you have to use the ./ specifier. For example to address the pom.xml file the current directory use: ./pom.xml

The following commands demonstrate that. You can also make a copy of the file.

 

# [reference] can be a branch, tag, HEAD or commit ID 
# [file_path] is the file name including path

git show [reference]:[file_path]

# to make a copy to copiedfile.txt

git show [reference]:[file_path] > copiedfile.txt # assume you have two pom.xml files. One in the root of the Git # repository and one in the current working directory # address the pom.xml in the git root folder git show HEAD:pom.xml # address the pom in the current directory git show HEAD:./pom.xml 

 

41.2. Restore a deleted file in a Git repo

You can checkout a file from the commit. To find the commit which deleted the file you can use the git log or the git ref-list command as demonstrated by the following command.

 

# see history of file
git log -- <file_path>

# checkout file based on predecessors the last commit which affect it
# this was the commit which delete the file
git checkout [commit] ^ -- <file_path> # alternatively use git rev-list git rev-list -n 1 HEAD -- <file_path> # afterwards, the same checkout based on the predecessors  git checkout [commit] ^ -- <file_path> 

 

41.3. See which commit deleted a file

The git log command allows you to determine which commit deleted a file. You can use the -- option in git log to see the commit history for a file, even if you have deleted the file.

 

# see the changes of a file, works even 
# if the file was deleted
git log -- [file_path]

# limit the output of Git log to the 
# last commit, i.e. the commit which delete the file
# -1 to see only the last commit
# use 2 to see the last 2 commits etc
git log -1 -- [file_path] # include stat parameter to see # some statics, e.g., how many files were  # deleted git log -1 --stat -- [file_path] 

 

42. Revert commits

42.1. Reverting a commit

You can revert commits via the git revert command. This command reverts the changes of a commit.

Such commits are useful to document that a change was withdrawn.

42.2. Example: Reverting a commit

The following command demonstrates the usage of the git revert command.

 

# revert a commit
git revert commit_id 

 

43. Resetting the working tree based on a commit

43.1. Checkout based on commits and working tree

You can check out older revisions of your file system via the git checkout command followed by the commit ID. This command will reset your complete working tree to the status described by this commit.

The commit ID is shown if you enter the git log command.

The following command shows the log.

 

# displays the commit history of the repository
# which contains the commit ID, author, message etc.
git log 

 

The following listing shows an example output of a Git log command.

 

commit 046474a52e0ba1f1435ad285eae0d8ef19d529bf
Author: Lars Vogel <[email protected]>
Date:   Wed Jun 5 12:13:04 2013 +0200 Bug 409373 - Updates version number of e4 tools Repairs the build commit 2645d7eef0e24195fc407137200fe7e1795ecf49 Author: Lars Vogel <[email protected]> Date: Wed Jun 5 12:00:53 2013 +0200 Bug 409373 - Updates version number of e4 CSS spy features 

 

43.2. Example: Checkout a commit

To checkout a specific commit you can use the following command.

 

# checkout the older revision via 
git checkout [commit_id]

# based on the example output this could be
git checkout 046474a52e0ba1f1435ad285eae0d8ef19d529bf # or you can use the abbreviated version git checkout 046474a5 

 

Warning

 

If you checkout a commit, you are in the detached head mode and commits in this mode are harder to find after you checkout another branch. Before committing it is good practice to create a new branch to leave the detached head mode. See Section 44.1, “Detached HEAD” for details.

44. Recovering lost commits

44.1. Detached HEAD

If you checkout a commit or a tag, you are in the so-called detached HEAD mode. If you commit changes in this mode, you have no branch which points to this commit. After you checkout a branch you cannot see the commit you did in detached head mode in the git log command.

To find such commits you can use the git reflog command.

44.2. git reflog

Reflog is a mechanism to record the movements of the HEAD and the branches references.

The Git reflog command gives a history of the complete changes of the HEAD reference.

 

git reflog
# <output>
# ... snip ...
1f1a73a HEAD@{2}: commit: More chaanges - typo in the commit message 45ca204 HEAD@{3}: commit: These are new changes cf616d4 HEAD@{4}: commit (initial): Initial commit 

 

The git reflog command also list commits which you have removed.

Tip

 

There are multiple reflogs: one per branch and one for HEAD. For branches use the git reflog [branch] command and for HEAD use the git reflogor the git reflog HEAD command.

44.3. Example

The following example shows how you can use git reflog to reset the current local branch to a commit which isn't reachable from the current branch anymore.

 

# assume the  ID for the second commit is
# 45ca2045be3aeda054c5418ec3c4ce63b5f269f7

# resets the head for your tree to the second commit
git reset --hard 45ca2045be3aeda054c5418ec3c4ce63b5f269f7

# see the log
git log # output shows the history until the 45ca2045be commit # see all the history including the deletion git reflog # <output> cf616d4 HEAD@{1}: reset: moving to 45ca2045be3aeda054c5418ec3c4ce63b5f269f7 # ... snip ... 1f1a73a HEAD@{2}: commit: More chaanges - typo in the commit message 45ca204 HEAD@{3}: commit: These are new changes cf616d4 HEAD@{4}: commit (initial): Initial commit git reset --hard 1f1a73a 

 

45. Remote and local tracking branches

45.1. Remote tracking branches

Your local Git repository contains references to the state of the branches on the remote repositories to which it is connected. These local references are called remote-tracking branches.

You can see your remote-tracking branches with the following command.

 

# list all remote branches
git branch -r 

 

To update remote-tracking branches without changing local branches you use the git fetch command which is covered in Section 46, “Updating your remote-tracking branches with git fetch”.

45.2. Delete a remote-tracking branch in your local repository

It is also safe to delete a remote branch in your local Git repository. You can use the following command for that.

 

# delete remote branch from origin

git branch -d -r origin/[remote_branch] 

 

The next time you run the git fetch command the remote branch is recreated.

45.3. Delete a branch in a remote repository

To delete the branch in a remote repository use the following command.

 

# delete branch in a remote repository
git push [remote] :branch 

 

Alternatively you can also use the following command.

 

# delete branch in a remote repository

git push [remote] --delete :[branch] 

 

For example if you want to delete the branch called testbranch in the remote repository called origin you can use the following command.

 

git push origin :testbranch 

 

Note

 

Note you can also specify the remote repository's URL. So the following command also works.

 

git push ssh://[URL_to_repo] :testbranch 

 

45.4. Tracking branches

Branches can track another branch. This is called to have an upstream branch and such branches can be referred to as tracking branches.

Tracking branches allow you to use the git pull and git push command directly without specifying the branch and repository.

If you clone a Git repository, your local master branch is created as a tracking branch for the master branch of the origin repository (short: origin/master) by Git.

45.5. Setting up tracking branches

You create new tracking branches by specifying the remote branch during the creation of a branch. The following example demonstrates that.

 

# setup a tracking branch called newbrach
# which tracks origin/newbranch
git checkout -b newbranch origin/newbranch 

 

Instead of using the git checkout command you can also use the git branch command.

 

# origin/master used as example, but can be replaced

# create branch based on remote branch
git branch [new_branch] origin/master

# use --track, 
# default when the start point is a remote-tracking branch
git branch --track [new_branch] origin/master 

 

The --no-track allows you to specify that you do not want to track a branch. You can explicitly add a tracking branch with the git branch -u command later.

 

# instruct Git to create a branch which does 
# not track another branch
git branch --no-track [new_branch_notrack] origin/master

# update this branch to track the origin/master branch
git branch -u origin/master [new_branch_notrack] 

 

45.6. See the branch information for a remote repository

To see the tracking branches for a remote repository (short: remote) you can use the following command.

 

# show all remote and tracking branches for origin
git remote show origin 

 

An example output of this might look as follows.

 

* remote origin
  Fetch URL: ssh://[email protected]/gitroot/e4/org.eclipse.e4.tools.git
  Push  URL: ssh://[email protected]/gitroot/e4/org.eclipse.e4.tools.git
  HEAD branch: master
  Remote branches:
    integration                tracked
    interm_rc2                 tracked
    master                     tracked
    smcela/HandlerAddonUpdates tracked
  Local branches configured for 'git pull':
    integration rebases onto remote integration
    master      rebases onto remote master
    testing     rebases onto remote master
  Local refs configured for 'git push':
    integration pushes to integration (up to date)
    master      pushes to master      (up to date) 

 

46. Updating your remote-tracking branches with git fetch

46.1. Fetch

The git fetch command updates your remote-tracking branches, i.e., it updates the local copy of branches stored in a remote repository. The following command updates the remote-tracking branches from the repository called origin.

 

git fetch origin 

 

The fetch command only updates the remote-tracking branches and none of the local branches and it does not change the working tree of the Git repository. Therefore, you can run the git fetch command at any point in time.

After reviewing the changes in the remote tracking branch you can merge the changes into your local branches or rebase your local branches onto the remote-tracking branch.

Alternatively you can also use the git cherry-pick commit_id command to take over only selected commits.

See Section 53, “Applying a single commit” for information about cherry-pick. See Section 47, “Merging” for the merge operation and Section 50.1, “Rebasing branches” for the rebase command.

46.2. Fetch from all remote repositories

The git fetch command updates only the remote-tracking branches for one remote repository. In case you want to update the remote-tracking branches of all your remote repositories you can use the following command.

 

# simplification of the fetch command
# this runs git fetch for every remote repository
git remote update

# the same but remove all stale branches which 
# are not in the remote anymore
git remote update --prune 

 

46.3. Compare remote-tracking branch with local branch

The following code shows a few options how you can compare your branches.

 

# show the log entries between the last local commit and the
# remote branch  
git log HEAD..origin/master

# show the diff for each patch 
git log -p HEAD..origin/master # show a single diff  git diff HEAD...origin/master # instead of using HEAD you can also # specify the branches directly git diff master origin/master 

 

The above commands show the changes introduced in HEAD compared to origin. If you want to see the changes in origin compared to HEAD, you can switch the arguments or use the -R parameter.

46.4. Rebase your local branch onto the remote-tracking branch

You can rebase your current local branch onto a remote-tracking branch. The following commands demonstrate that.

 

# assume you want to rebase master based on the latest fetch
# therefore check it out
git checkout master

# update your remote-tracking branch
git fetch # rebase your master onto origin/master git rebase origin/master 

 

Tip

 

More information on the rebase command can be found in Section 50.1, “Rebasing branches”.

46.5. Fetch compared with pull

The git pull command performs a git fetch and git merge (or git rebase based on your Git settings). The git fetch does not perform any operations on your local branches. You can always run the fetch command and review the incoming changes.

47. Merging

Git allows you to combine the changes which were created on two different branches. One way to achieve this is merging, which is described in this chapter. Other ways are using rebase or cherry-pick.

48. Merging branches

48.1. Fast-forward merge

If the commits which are merged are direct successors of the HEAD pointer of the current branch, Git simplifies things by performing a so-called fast forward merge. This fast forward merge simply moves the HEAD pointer of the current branch to the tip of the branch which is being merged. You can also merge based on a tag or a commit.

This process is depicted in the following diagram. The first picture assumes that master is checked out and that you want to merge the changes of the branch labeled "branch 1" into your "master" branch. Each commit points to its predecessor (parent).

 

 

After the fast-forward merge the HEAD points to the master branch pointing to "Commit 3". The "branch 1" branch points to the same commit.

 

 

48.2. Merge commit

If commits are merged which are not direct predecessors of the current branch, Git performs a so-called three-way-merge between the latest commits of the two branches, based on the most recent common predecessor of both.

 

 

As a result a so-called merge commit is created on the current branch which combines the respective changes from the two branches being merged. This commit points to both of its predecessors.

 

 

Note

 

If multiple common predecessors exist, Git uses recursion to create a virtual common predecessor. For this Git creates a merged tree of the common ancestors and uses that as the reference for the 3-way merge. This is called the recursive merge strategy and is the default merge strategy.

48.3. Merge strategies - Octopus, Subtree, Ours

If a fast-forward merge is not possible, Git uses a merge strategy. The default strategy called recursive merge strategy was described in Section 48.2, “Merge commit”.

The Git command line tooling also supports the octopus merge strategy for merges of multiple references. With this operation it can merge multiple branches at once.

The subtree option is useful when you want to merge in another project into a sub-directory of your current project. It is rarely used and you should prefer the usage of Git submodules. See Section 59.1, “What are submodules?” for more information.

The ours strategy merges a branch without looking at the changes introduced in this branch. This keeps the history of the merged branch but ignores the changes introduced in this branch.

You typically use the ours merge strategy to document in the Git repository that you have integrated a branch and decided to ignore all changes from this branch.

49. Commands to merge two branches

49.1. The git merge command

The git merge command performs a merge. You can merge changes from one branch to the current active one via the following command.

 

# syntax: git merge <branch-name>
# merges into your currently checked out branch
git merge testing 

 

49.2. Specifying merge strategies

The -s parameter allows you to specify other merge strategies. This is demonstrated with the following command.

For example, you can specify the ours strategy in which the result of the merge is always that of the current branch head, effectively ignoring all changes from all other branches. This is demonstrated with the following command.

 

# merge branch "obsolete" ignoring all 
# changes in the branch
git merge -s ours obsolete 

 

Warning

 

Be careful if you use the ours merge strategy, it ignores everything from the branch which is merged.

The usage of the octopus merge strategy is triggered if you specify more than one reference to merge.

 

# merge the branch1 and the branch2 using 
# changes in the branch
git merge branch1 branch2</code> 

 

49.3. Specifying parameters for the default merge strategy

The recursive merge strategy (default) allows you to specify flags with the -X parameter. For example you can specify here the ours option. This option forces conflicting changes to be auto-resolved by favoring the local version. Changes from the other branch that do not conflict with our local version are reflected to the merge result. For a binary file, the entire contents are taken from the local version.

Warning

 

The ours option for the recursive merge strategy should not be confused with the ours merge strategy.

A similar option to ours is the theirs option. This option prefers the version from the branch which is merged.

Both options are demonstrated in the following example code.

 

# merge changes preferring our version
git merge -s recursive -X ours [branch_to_merge]

# merge changes preferring the version from 
# the branch to merge
git merge -s recursive -X theirs [branch_to_merge] 

 

Another useful option is the ignore-space-change parameter which ignores whitespace changes.

For more information about the merge strategies and options see Git merge manpage.

49.4. Enforcing the creation of a merge commit

If you prefer to have merge commits even for situations in which Git could perform a fast-forward merge you can use the git merge --no-ff command.

The --no-ff parameter can make sense if you want to record in the history at which time you merged from a maintenance branch to the master branch.

When pulling from a remote repository, prefer doing a rebase to a merge. This will help to keep the history easier to read. A merge commit can be helpful to document that functionality was developed in parallel.

50. Rebasing branches

50.1. Rebasing branches

You can use Git to rebase one branch on another one. As described, the merge command combines the changes of two branches. If you rebase a branch called A onto another, the git command takes the changes introduced by the commits of branch A and applies them based on the HEAD of the other branch. This way the changes in the other branch are also available in branch A.

The process is displayed in the following picture. We want to rebase the branch called branch_1 onto master.

 

 

Running the rebase command creates a new commit with the changes of the branch on top of the master branch.

 

 

Performing a rebase does not create a merge commit. The final result for the source code is the same as with merge but the commit history is cleaner; the history appears to be linear.

Rebase can be used to forward-port a feature branch in the local Git repository onto the changes of the master branch. This ensures that your feature is close to the tip of the upstream branch until it is finally published.

If you rewrite more than one commit by rebasing, you may have to solve conflicts per commit. In this case the merge operations might be simpler to be performed because you only have to solve merge conflicts once.

Also, if your policy requires that all commits result in correct software you have to test all the rewritten commits since they are "rewritten" by the rebase algorithm. Since merge/rebase/cherry-pick are purely text-based and do not understand the semantics of these texts they can end up with logically incorrect results. Hence, it might be more efficient to merge a long feature branch into upstream instead of rebasing it since you only have to review and test the merge commit.

Note

 

You can use the rebase command to change your Git repository history commits. This is called interactive rebase, see ??? for information about this feature.

50.2. Good practice for rebase

You should avoid using the Git rebase operation for changes which have been published in other Git repositories. The Git rebase operation creates new commit objects, this may confuse other developers using the existing commit objects.

Assume that a user has a local feature branch and wants to push it to a branch on the remote repository. However, the branch has evolved and therefore pushing is not possible. Now it is good practice to fetch the latest state of the branch from the remote repository. Afterwards you rebase the local feature branch onto the remote tracking branch. This avoids an unnecessary merge commit. This rebasing of a local feature branch is also useful to incorporate the latest changes from remote into the local development, even if the user does not want to push right away.

Tip

 

Rebasing and amending commits is safe as long as you do not push any of the changes involved in the rebase. For example, when you cloned a repository and worked in this local repository. Rebasing is a great way to keep the history clean before contributing back your modifications.

Warning

 

In case you want to rewrite history for changes you have shared with others you need to use the -f parameter in your git push command and subsequently your colleagues have to use fetch -f to fetch the rewritten commits.

 

# using forced push
git push -f 

 

51. Example for a rebase

The following demonstrates how to perform a rebase operation.

 

# create new branch 
git checkout -b rebasetest

# create a new file and put it under revision control
touch rebase1.txt git add . && git commit -m "work in branch" # do changes in master git checkout master # make some changes and commit into testing echo "rebase this to rebasetest later" > rebasefile.txt git add rebasefile.txt git commit -m "create new file" # rebase the rebasetest onto master git checkout rebasetest git rebase master # now you can fast forward your branch onto master git checkout master git merge rebasetest 

 

52. Example: Interactive rebase

The following commands create several commits which will be used for the interactive rebase.

 

# create a new file
touch rebase.txt

# add it to git
git add . && git commit -m "add rebase.txt to staging area" # do some silly changes and commit echo "content" >> rebase.txt git add . && git commit -m "add content" echo " more content" >> rebase.txt git add . && git commit -m "just testing" echo " more content" >> rebase.txt git add . && git commit -m "woops" echo " more content" >> rebase.txt git add . && git commit -m "yes" echo " more content" >> rebase.txt git add . && git commit -m "add more content" echo " more content" >> rebase.txt git add . && git commit -m "creation of important configuration file" # check the git log message git log 

 

We want to combine the last seven commits. You can do this interactively via the following command.

 

git rebase -i HEAD~7 

 

This command opens your editor of choice and lets you configure the rebase operation by defining which commits to pick, squash or fixup.

The following listing shows an example of the selection, we pick the last commit, squash 5 commits and fix the sixth commit. The listing uses the long format of the commands (for example fixup instead of the short form f) for better readability.

 

pick 7c6472e rebase.txt added to index
fixup 4f73e68 added content
fixup bc9ec3f just testing
fixup 701cbb5 ups
fixup 910f38b yes
fixup 31d447d added more content
squash e08d5c3 creation of important configuration file

# Rebase 06e7464..e08d5c3 onto 06e7464
#
# Commands:
#  p, pick = use commit
#  r, reword = use commit, but edit the commit message
#  e, edit = use commit, but stop for amending
#  s, squash = use commit, but meld into previous commit
#  f, fixup = like "squash", but discard this commit's log message
#  x, exec = run command (the rest of the line) using shell
#
# These lines can be re-ordered; they are executed from top to bottom.
#
# If you remove a line here THAT COMMIT WILL BE LOST.
# However, if you remove everything, the rebase will be aborted. 

 

53. Applying a single commit

The git cherry-pick command allows you to select the patch which was introduced with an individual commit and apply this patch on another branch. The patch is captured as a new commit on the other branch.

This way you can select individual changes from one branch and transfer them to another branch.

Note

 

The new commit does not point back to its original commit so do not use cherry-pick blindly since you may end up with several copies of the same change. Most often cherry-pick is either used locally (to emulate an interactive rebase) or to port individual bug fixes done on a development branch into maintenance branches.

54. Example: Using cherry-pick

In the following example you create a new branch and commit two changes.

 

# create new branch
git checkout -b picktest

# create some data and commit
touch pickfile.txt git add pickfile.txt git commit -m "adds new file" # create second commit  echo "changes to file" > pickfile.txt git commit -a -m "changes in file" 

 

You can check the commit history, for example, with the git log --oneline command.

 

# see change commit history

git log --oneline

# results in the following output

2fc2e55 changes in file
ebb46b7 adds new file
[MORE COMMITS]
330b6a3 initial commit 

 

The following command selects the first commit based on the commit ID and applies its changes to the master branch. This creates a new commit on the master branch.

 

git checkout master
git cherry-pick ebb46b7 

 

The cherry-pick command can be used to change the order of commits. git cherry-pick also accepts commit ranges for example in the following command.

 

git checkout master
# pick the last two commits
git cherry-pick picktest~1..picktest~2 

 

Tip

 

See Section 7.5, “Commit ranges with the double dot operator” for more information about commit ranges.

If things go wrong or you change your mind, you can always reset to the previous state using the following command.

 

git cherry-pick --abort 

 

55. Solving merge conflicts

55.1. What is a conflict during a merge operation?

A conflict during a merge operation occurs if two commits from different branches have modified the same content and Git cannot automatically determine how both changes should be combined when merging these branches.

This happens for example if the same line in a file has been replaced by two different commits.

If a conflict occurs, Git marks the conflict in the file and the programmer has to resolve the conflict manually.

After resolving it, he adds the file to the staging area and commits the change. These steps are required to finish the merge operation.

55.2. Keep a version of a file during a merge conflict

Sometimes if a conflict occurs the developer does not want to solve the conflict. He decides that he wants to keep the original version or the new version of the file.

For this, there is the --theirs and the --ours options on the git checkout command. The first option keeps the version of the file that you merged in, and the second option keeps the version before the merge operation was started.

 

git checkout --ours foo/bar.java
git add foo/bar.java 

 

 

git checkout --theirs foo/bar.java
git add foo/bar.java 

 

56. Exercise: Solving a conflict during a merge operation

56.1. Create a conflict

In the following example you create a conflict during a merge operation.

The following steps create a merge conflict. It assumes that repo1 and repo2 have the same origin repository defined.

 

# switch to the first directory 
cd ~/repo01
# make changes
echo "Change in the first repository" > mergeconflict.txt # stage and commit git add . && git commit -a -m "Will create conflict 1" 

 

 

# switch to the second directory
cd ~/repo02
# make changes
touch mergeconflict.txt echo "Change in the second repository" > mergeconflict.txt # stage and commit git add . && git commit -a -m "Will create conflict 2" # push to the master repository git push 

 

 

# switch to the first directory
cd ~/repo01

# now try to push from the first directory
# try to push --> assuming that the same remote repository is used,
# you get an error message
git push 

 

As this push would not result in a non-fast-format merge, you receive an error message similar to the following listing.

 

! [rejected]        master -> master (fetch first)
error: failed to push some refs to '../remote-repository.git/'
hint: Updates were rejected because the remote contains work that you do hint: not have locally. This is usually caused by another repository pushing hint: to the same ref. You may want to first integrate the remote changes hint: (e.g., 'git pull ...') before pushing again. hint: See the 'Note about fast-forwards' in 'git push --help' for details. 

 

To solve this, you need to integrate the remote changes into your local repository. In the following listing the git fetch command gets the changes from the remote repository. The git merge command tries to integrate it into your local repository.

 

# get the changes via a fetch
git fetch origin

# now merge origin/master into the local master
# this creates a merge conflict in your
# local repository
git merge origin/master 

 

This creates the conflict and a message similar to the following.

 

Auto-merging mergeconflict.txt
CONFLICT (add/add): Merge conflict in mergeconflict.txt
Automatic merge failed; fix conflicts and then commit the result. 

 

The resulting conflict is displayed in Section 56.2, “Review the conflict in the file” and solved in Section 56.3, “Solve a conflict in a file”

Tip

 

If you use the git pull command it performs the "fetch and merge" or the "fetch and rebase" command together in one step. Whether merge or rebase is used depends on your Git configuration for the branch. See Section 10.4, “Avoid merge commits for pulling” for the global configuration.

56.2. Review the conflict in the file

Git marks the conflicts in the affected files. In the example from Section 56.1, “Create a conflict” one file has a conflict and the file looks like the following listing.

 

<<<<<<< HEAD
Change in the first repository
=======
Change in the second repository
>>>>>>> b29196692f5ebfd10d8a9ca1911c8b08127c85f8 

 

The text above the ======= signs is the conflicting change from your current branch and the text below is the conflicting change from the branch that you are merging in.

56.3. Solve a conflict in a file

In this example you resolve the conflict which was created in Section 56.1, “Create a conflict” and apply the change to the Git repository.

To solve the merge conflict you edit the file manually. The following listing shows a possible result.

 

Change in the first and second repository 

 

Afterwards add the affected file to the staging area and commit the result. This creates the merge commit. You can also push the integrated changes now to the remote repository.

 

# add the modified file
git add .

# creates the merge commit
git commit -m "Merge changes"

# push the changes to the remote repository
git push 

 

Instead of using the -m option in the above example you can also use the git commit command without this option. In this case the command opens your default editor with the default commit message about the merged conflicts. It is good practice to use this message.

Tip

 

Alternatively, you could use the git mergetool command. git mergetool starts a configurable merge tool that displays the changes in a split screen. Some operating systems may come with a suitable merge tool already installed or configured for Git.

57. Solving rebase conflicts

57.1. What is a conflict during a rebase operation?

During a rebase operaton, several commits are applied onto a certain commit. If you rebase a branch onto another branch, this commit is the last common ancestor of the two branches.

For each commit which is applied it is possible that a conflict occurs.

57.2. Handling a conflict during a rebase operation

If a conflict occurs during a rebase operation, the rebase operation stops and the developer needs to resolve the conflict. After he has solved the conflicts, the developer instructs Git to continue with the rebase operation.

A conflict during a rebase operation is solved similarly to the way a conflict during a merge operation is solved. The developer edits the conflicts and adds the files to the Git index. Afterwards he continues the rebase operation with the following command.

 

# rebase conflict is fixed, continue with the rebase operation
git rebase --continue 

 

To see the files which have a rebase conflict use the following command.

 

# lists the files which have a conflict
git diff --name-only --diff-filter=U 

 

You solve such a conflict similar to the description in Section 56.3, “Solve a conflict in a file”.

You can also skip the commit which creates the conflict.

 

# skip commit which creates the conflict
git rebase --skip 

 

57.3. Aborting a rebase operation

You can also abort a rebase operation with the following command.

 

# abort rebase and recreate the situation before the rebase
git rebase --abort 

 

57.4. Picking theirs or ours for conflicting file

If a file is in conflict you can instruct Git to take the version from the new commit of the version of commit onto which the new changes are applied. This is sometimes easier than to solve all conflicts manually. For this you can use the git checkout with the --theirs or --ours flag. During the conflict --ours points to the file in the commit onto which the new commit is placed, i.g., using this skips the new changes for this file.

Therefore to ignore the changes in a commit for a file use the following command.

 

git checkout --ours foo/bar.java
git add foo/bar.java 

 

To take the version of the new commit use the following command.

 

git checkout --theirs foo/bar.java
git add foo/bar.java 

 

58. Define alias

58.1. Using an alias

An alias in Git allows you to create a short form of one or several existing Git commands. For example, you can define an alias which is a short form of your own favorite commands or you can combine several commands with an alias.

58.2. Alias examples

The following defines an alias to see the staged changes with the new git staged command.

 

git config --global alias.staged 'diff --cached' 

 

Or you can define an alias for a detailed git log command. The following command defines the git ll alias.

 

git config --global alias.ll 'log --graph --oneline --decorate --all' 

 

You can also run external commands. In this case you start the alias definition with a ! character. For example, the following defines the git ac command which combinesgit add . -A and git commit commands.

 

# define alias
git config --global alias.act '!git add . -A && git commit' # to use it git act -m "message" 

 

Warning

 

In the past msysGit for Windows had problems with an alias beginning with !, but it has been reported that this now works with msysGit, too .

59. Submodules - repositories inside other Git repositories

59.1. What are submodules?

Git allows you to include other Git repositories into a Git repository. This is useful in case you want to include a certain library in another repository or in case you want to aggregate certain Git repositories.

Git calls these included Git repositories submodules. Git allows you to commit, pull and push to these repositories independently.

59.2. Adding a submodule to a Git repository

You add a submodule to a Git repository via the git submodule add command. The git submodule init command creates the local configuration file for the submodules if this configuration does not exist.

 

# add a submodule to your Git repo
git submodule add [URL to Git repo]

# initialize submodule configuration
git submodule init 

 

60. Working with submodules

60.1. Updating submodules

To pull in changes into a Git repository including the changes in submodules, you can use the --recurse-submodules parameter in the git pull command.

 

# pull in the changes from main repo and submodules
git pull --recurse-submodules 

 

Use the git submodule update command to set the submodules to the commit specified by the main repository.

 

# setting the submodules to the commit defined by master
git submodule update 

 

Warning

 

The fact that submodules track commits and not branches frequently leads to confusion. That is why Git 1.8.2 added the option to also track branches. Read the following sections to learn more about this.

60.2. Tracking branches with submodules

Since its 1.8.2 release the Git system allows tracking a branch in a submodule. To track branches you specify the branch with the -b parameter during the submodule addcommand.

This allows you use to use --remote parameter in the git submodule update command.

 

# add submodule to track master branch
git submodule add -b master [URL to Git repo]

# update your submodule
# --remote will also fetch and ensure that
# the latest commit from the branch is used
git submodule update --remote # to avoid fetching use git submodule update --remote --no-fetch 

 

60.3. Tracking commits

Without any additional parameter, submodules are tracked by commit, i.e., the main Git repository remembers a certain commit of the submodule.

The git submodule update command sets the Git repository of the submodule to that particular commit. The submodule repository tracks its own content which is nested into the main repository. This main repository refers to a commit of the nested submodule repository.

Warning

 

This means that if you pull in new changes into the submodules, you need to create a new commit in your main repository in order to track the updates of the nested submodules.

If you update your submodule and want to use this update in your main repository, you need to commit this change in your main repository. The git submodule updatecommand sets the submodule to the commit referred to in the main repository.

The following example shows how to update a submodule to its latest commit in its master branch.

 

# update submodule in the master branch
# skip this if you use --recurse-submodules 
# and have the master branch checked out
cd [submodule directory]
git checkout master git pull # commit the change in main repo # to use the latest commit in master of the submodule cd .. git add [submodule directory] git commit -m "move submodule to latest commit in master" # share your changes git push 

 

Another developer can get the update by pulling in the changes and running the submodules update command.

 

# another developer wants to get the changes
git pull

# this updates the submodule to the latest
# commit in master as set in the last example
git submodule update 

 

Warning

 

With this setup you are tracking commits, so if the master branch in the submodule moves on, you are still pointing to the existing commit. You need to repeat this procedure every time you want to use new changes of the submodules. See Section 60.2, “Tracking branches with submodules” for tracking branches.

61. Error search with git bisect

61.1. Using git bisect

The git bisect command allows you to run a binary search through the commit history to identify the commit which introduced an issue. You specify a range of commits and a script that the bisect command uses to identify whether a commit is good or bad.

This script must return 0 if the condition is fulfilled and non-zero if the condition is not fulfilled.

61.2. git bisect example

Create a new Git repository, create the text1.txt file and commit it to the repository. Do a few more changes, remove the file and again do a few more changes.

We use a simple shell script which checks the existence of a file. Ensure that this file is executable.

 

#!/bin/bash
FILE=$1
 
if [ -f $FILE ]; then exit 0; else exit 1; fi 

 

Afterwards use the git bisect command to find the bad commit. First you use the git bisect start command to define a commit known to be bad (showing the problem) and a commit known to be good (not showing the problem).

 

# define that bisect should check
# the last 5 commits
git bisect start HEAD HEAD~5 

 

Afterwards run the bisect command using the shell script.

 

# assumes that the check script
# is a directory above the current
git bisect run ../check.sh test1.txt 

 

Tip

 

The above commands serve as an example. The existence of a file can be easier verified with the git bisect command: git bisect run test -f test1.txt

62. Rewriting commit history with git filter-branch

62.1. Using git filter-branch

The git filter-branch command allows you to rewrite the Git commit history for selected branches and to apply custom filters on each revision. This creates different hashes for all modified commits. This implies that you get new IDs for all commits based on any rewritten commit.

The command allows you to filter for several values, e.g., the author, the message, etc. For details please see the following link:

git-filter-branch(1) Manual Page

Warning

 

Using the filter-branch command is dangerous as it changes the Git repository. It changes the commit IDs and reacting on such a change requires explicit action from the developer, e.g., trying to rebase the stale local branch onto the corresponding rewritten remote-tracking branch.

A practical case for using git filter-branch is where you have added a file which contains a password or a huge binary file to the Git repository, and you want to remove this file from the history. To completely remove the file you need to run the filter-branch command on all branches.

62.2. filter-branch example

The following listing shows an example on how to replace the email address from one author of all the commits via the git filter-branch command.

 

git filter-branch -f \
--env-filter 'if [ "$GIT_AUTHOR_NAME" = "Lars Vogel" ]; then \ GIT_AUTHOR_EMAIL="[email protected]"; fi' HEAD) 

 

63. What is a patch file?

A patch is a text file that contains changes to the source code. A patch created with the git format-patch command includes meta-information about the commit (committer, date, commit message, etc) and also contains the changes introduced in binary data in the commit, for example, an image.

This file can be sent to someone else and this developer can use this file to apply the changes to his local repository. The metadata is preserved.

Alternatively you could create a diff file with the git diff command, but this diff file does not contain the metadata information.

64. Example: Creating patches

64.1. Create and apply patches

The following example creates a branch, changes several files and creates a commit recording these changes.

 

# create a new branch
git branch mybranch
# use this new branch
git checkout mybranch # make some changes touch test05 # change some content in an existing file echo "new content for test01" >test01 # commit this to the branch git add . git commit -m "first commit in the branch" 

 

The next example creates a patch for these changes.

 

# creates a patch --> git format-patch master
git format-patch origin/master

# this creates the file:
# patch 0001-First-commit-in-the-branch.patch 

 

To apply this patch to your master branch in a different clone of the repository, switch to it and use the git apply command.

 

# switch to the master branch
git checkout master

# apply the patch
git apply 0001-First-commit-in-the-branch.patch 

 

Afterwards you can commit the changes introduced by the patches and delete the patch file.

 

# patch is applied to master
# change can be committed
git add .
git commit -m "apply patch" # delete the patch file rm 0001-First-commit-in-the-branch.patch 

 

Tip

 

Use the git am command to apply and commit the changes in a single step. To apply and commit all patch files in the directory use, for example, thegit am *.patch command. You specify the order in which the patches are applied by specifying them on the command line.

64.2. Create a patch for a selected commit

You can specify the commit ID and the number of patches which should be created. For example, to create a patch for selected commits based on the HEAD pointer you can use the following commands.

 

# create patch for the last commit based on HEAD
git format-patch -1 HEAD # create a patch series for the last three commits  # based on head git format-patch -3 HEAD 

 

65. Git commit and other hooks

65.1. Usage of Git hooks

Git provides commit hooks, e.g., programs which can be executed at a pre-defined point during the work with the repository. For example, you can ensure that the commit message has a certain format or trigger an action after a push to the server.

These programs are usually scripts and can be written in any language, e.g., as shell scripts or in Perl, Python etc. You can also implement a hook, for example, in C and use the resulting executables. Git calls the scripts based on a naming convention.

65.2. Client and server side commit hooks

Git provides hooks for the client and for the server side. On the server side you can use the pre-receive and post-receive script to check the input or to trigger actions after the commit. The usage of a server commit hook requires that you have access to the server. Hosting providers like GitHub or Bitbucket do not offer this access.

If you create a new Git repository, Git creates example scripts in the .git/hooks directory. The example scripts end with .sample. To activate them make them executable and remove the .sample from the filename.

The hooks are documented under the following URL: Git hooks manual page.

65.3. Restrictions

Not all Git server implementations support server side commit hooks. For example Gerrit (a Git server which also provides the ability to do code review) does not support hooks in this form. Also Github and Bitbucket do not support server hooks at the time of this writing.

Local hooks in the local repository can be removed by the developer.

66. Handling line endings on different platforms

66.1. Line endings of the different platforms

Every time a developer presses return on the keyboard an invisible character called a line ending is inserted. Unfortunately, different operating systems handle line endings differently.

Linux and Mac use different line endings than Windows. Windows uses a carriage-return and a linefeed character (CRLF), while Linux and Mac only uses a linefeed character (LF). This becomes a problem if developers use different operating system to commit changes to a Git repository.

To avoid commits because of line ending differences in your Git repository you should configure all clients to write the same line ending to the Git repository.

66.2. Configuring line ending settings as developer

On Windows systems you can tell Git to convert line endings during a checkout to CRLF and to convert them back to LF during commit. Use the following setting for this.

 

# configure Git on Windows to properly handle line endings
git config --global core.autocrlf true 

 

On Linux and Mac you can tell Git to convert CRLF to LF with the following setting.

 

# configure Git on Linux and Mac to properly handle line endings
git config --global core.autocrlf input 

 

66.3. Configuring line ending settings per repository

You can also configure the line ending handling per repository by adding a special .gitattributes file to the root folder of your Git repository. If this file is committed to the repository, it overrides the core.autocrlf setting of the individual developer.

In this file you can configure Git to auto detect the line endings.

Note

 

Not all graphical Git tools support the .gitattributes file, for example the Eclipse IDE does currently not support it. See Eclipse Bug report.

67. Migrating from SVN

To convert Subversion projects to Git you can use a RubyGem called svn2git which relies on git svn internally and handles most of the trouble.

To install it (on Ubuntu) simply type:

 

sudo apt-get install git-svn ruby rubygems

sudo gem install svn2git 

 

Let's say you have a repository called http://svn.example.com/repo with the default layout (trunk, branches, tags) and already prepared a local git repository where you want to put everything, then navigate to your git directory and use the following commands:

 

svn2git http://svn.example.com/repo --verbose

svn2git --rebase 

 

The parameter --verbose adds detailed output to the commandline so you can see what is going on including potential errors. The second svn2git --rebase command aligns your new git repository with the svn import. You are now ready to push to the web and get forked! If your svn layout deviates from the standard or other problems occur, seeksvn2git --help for documentation on additional parameters.

68. Frequently asked questions

68.1. Can Git handle symlinks?

The usage of symlinks requires that the operating system used by the developers supports them.

Git as version control system can handle symlinks.

If the symlink points to a file, then Git stores the path information it is symlinking to, and the file type. This is similar to a symlink to a directory; Git does not store the contents under the symlinked directory.

69. Git series

This tutorial is part of a series about the Git version control system. See the other tutorials for more information.

• Introduction to Git

• Using Github

• Hosting Git repositories at Bitbucket or on your own server

• Typical workflows with Git

• EGit - Teamprovider for Eclipse

 

70. Get the Book

This tutorial is part of a book available as paper print and electronic form for your Kindle.