Httpsqs的安装以及安装过程错误的解决方法

需求 ：进行商品搜索的时候，要从索引中进行搜索，由于后台要更新商品和插入商品，当时考虑到了怎么来插入新的索引和更新索引的问题，通过讨论，大家决定用Httpsqs这个消息中间来通知插入新索引和删除索引最后合并索引，来做到商品信息的实时更新。

下面我来讲一下Httpsqs的安装过程 ，以及在安装过程遇到的问题。

准备工作：

你需要准备一个虚拟机这里我们采用VMware7.1，

Linux采用centOs5.4 可以到http://vault.centos.org/5.4/isos/i386/CentOS-5.4-i386-bin-DVD.torrent这个网址进行下载。

安装 httpsqs

在安装httpsqs之前要安装

libevent-2.0.12-stable.tar.gz和okyocabinet-1.4.47.tar.gz

ulimit -SHn 65535

1、安装libevent-2.0.12-stable.tar.gz

wget http://httpsqs.googlecode.com/files/libevent-2.0.12-stable.tar.gz##下载
tar zxvf libevent-2.0.12-stable.tar.gz##解压
cd libevent-2.0.12-stable/
./configure --prefix=/usr/local/libevent-2.0.12-stable/
make
make install
cd ../

安装tokyocabinet-1.4.47.tar.gz

wget http://httpsqs.googlecode.com/files/tokyocabinet-1.4.47.tar.gz
tar zxvf tokyocabinet-1.4.47.tar.gz
cd tokyocabinet-1.4.47/
./configure --prefix=/usr/local/tokyocabinet-1.4.47/
#注：在32位Linux操作系统上编译Tokyo cabinet，请使用./configure --enable-off64代替./configure，可以使数据库文件突破2GB的限制。
#./configure --enable-off64 --prefix=/usr/local/tokyocabinet-1.4.47/
make
make install
cd ../

当执行第二步骤的会出错，是由于缺少bzip2-1.0.6.tar.gz

下面进行安装

http://www.bzip.org/1.0.6/bzip2-1.0.6.tar.gz安装开始；
wget  http://www.bzip.org/1.0.6/bzip2-1.0.6.tar.gz
tar -xvzf bzip2-1.0.6.tar.gz
cd bzip2-1.0.6.
make
 make install

在重复安装tokyocabinet-1.4.47.tar.gz还是失败，由于缺少zlib-1.2.5.tar.gz

下面进行安装

http://www.winimage.com/zLibDll/zlib-1.2.5.tar.gz安装开始；
wget  http://www.winimage.com/zLibDll/zlib-1.2.5.tar.gz
tar -xvzf zlib-1.2.5.tar.gz
cd zlib-1.2.5.
./configure
make
sudo make instal

继续第2步骤 OK

3、安装httpsqs-1.7.tar.gz

wget http://httpsqs.googlecode.com/files/httpsqs-1.7.tar.gz
tar zxvf httpsqs-1.7.tar.gz
cd httpsqs-1.7/
make
make install
cd ../

如果安装成功 执行httpsqs –h 会出现

--------------------------------------------------------------------------------------------------
HTTP Simple Queue Service - httpsqs v1.7 (April 14, 2011)


Author: Zhang Yan (http://blog.s135.com), E-mail: [email protected]
This is free software, and you are welcome to modify and redistribute it under the New BSD License


-l <ip_addr>  interface to listen on, default is 0.0.0.0
-p <num>      TCP port number to listen on (default: 1218)
-x <path>     database directory (example: /opt/httpsqs/data)
-t <second>   keep-alive timeout for an http request (default: 60)
-s <second>   the interval to sync updated contents to the disk (default: 5)
-c <num>      the maximum number of non-leaf nodes to be cached (default: 1024)
-m <size>     database memory cache size in MB (default: 100)
-i <file>     save PID in <file> (default: /tmp/httpsqs.pid)
-a <auth>     the auth password to access httpsqs (example: mypass123)
-d            run as a daemon
-h            print this help and exit


Use command "killall httpsqs", "pkill httpsqs" and "kill `cat /tmp/httpsqs.pid`" to stop httpsqs.
Please note that don't use the command "pkill -9 httpsqs" and "kill -9 PID of httpsqs"!


Please visit "http://code.google.com/p/httpsqs" for more help information.

但是没有 出现的是：

error while loading shared libraries: /usr/local/tokyocabinet-1.4.47/lib/libtokyocabinet.so.9: cannot restore segment prot after reloc: Permission denied

在google一下，说是没有建立它的软连接：

ln -s /usr/local/tokyocabinet-1.4.47/lib/libtokyocabinet.so.9 /usr/lib/libtokyocabinet.so.9

可是做了，还是报错 继续google，解决办法为：

vi /etc/sysconfig/selinux file
修改SELINUX=disabled

然后重启

再来一次

httpsqs -h
--------------------------------------------------------------------------------------------------
HTTP Simple Queue Service - httpsqs v1.7 (April 14, 2011)


Author: Zhang Yan (http://blog.s135.com), E-mail: [email protected]
This is free software, and you are welcome to modify and redistribute it under the New BSD License


-l <ip_addr>  interface to listen on, default is 0.0.0.0
-p <num>      TCP port number to listen on (default: 1218)
-x <path>     database directory (example: /opt/httpsqs/data)
-t <second>   keep-alive timeout for an http request (default: 60)
-s <second>   the interval to sync updated contents to the disk (default: 5)
-c <num>      the maximum number of non-leaf nodes to be cached (default: 1024)
-m <size>     database memory cache size in MB (default: 100)
-i <file>     save PID in <file> (default: /tmp/httpsqs.pid)
-a <auth>     the auth password to access httpsqs (example: mypass123)
-d            run as a daemon
-h            print this help and exit


Use command "killall httpsqs", "pkill httpsqs" and "kill `cat /tmp/httpsqs.pid`" to stop httpsqs.
Please note that don't use the command "pkill -9 httpsqs" and "kill -9 PID of httpsqs"!


Please visit "http://code.google.com/p/httpsqs" for more help information.

安装成功！！

关闭：killall httpsqs

然后启动：httpsqs-d -l 192.168.3.159 -a kevin -p 1218 -x /data0/goods

我的linux的ip：192.168.3.159

数据存储位置：/data0/goods

端口号：1218

做一些联系参考如下：
参考网址： http://blog.s135.com/httpsqs/