自定义ViewGroup支持margin，gravity以及水平，垂直排列
最近在学习android的view部分，于是动手实现了一个类似ViewPager的可上下或者左右拖动的ViewGroup，中间遇到了一些问题（例如touchEvent在onInterceptTouchEvent和onTouchEvent之间的传递流程），现在将我的实现过程记录下来。
首先，要实现一个ViewGroup，必须至少重写onLayout（）方法（当然还有构造方法啦：））。onLayout（）主要是用来安排子View在我们这个ViewGroup中的摆放位置的。除了onLayout（）方法之外往往还需要重写onMeasure（）方法，用于测算我们所需要占用的空间。
首先，我们来重写onMeasure（）方法：（先只考虑水平方向）
@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
// 计算所有child view 要占用的空间
desireWidth = 0;
desireHeight = 0;
int count = getChildCount();
for (int i = 0; i < count; ++i) {
View v = getChildAt(i);
if (v.getVisibility() != View.GONE) {
measureChild(v, widthMeasureSpec,
heightMeasureSpec);
desireWidth += v.getMeasuredWidth();
desireHeight = Math
.max(desireHeight, v.getMeasuredHeight());
}
}
// count with padding
desireWidth += getPaddingLeft() + getPaddingRight();
desireHeight += getPaddingTop() + getPaddingBottom();
// see if the size is big enough
desireWidth = Math.max(desireWidth, getSuggestedMinimumWidth());
desireHeight = Math.max(desireHeight, getSuggestedMinimumHeight());
setMeasuredDimension(resolveSize(desireWidth, widthMeasureSpec),
resolveSize(desireHeight, heightMeasureSpec));
}
我们计算出所有Visilibity不是Gone的View的宽度的总和作为viewgroup的最大宽度，以及这些view中的最高的一个作为viewgroup的高度。这里需要注意的是要考虑咱们viewgroup自己的padding。（目前先忽略子View的margin）。
onLayout（）：
@Override
protected void onLayout(boolean changed, int l, int t, int r, int b) {
final int parentLeft = getPaddingLeft();
final int parentRight = r - l - getPaddingRight();
final int parentTop = getPaddingTop();
final int parentBottom = b - t - getPaddingBottom();
if (BuildConfig.DEBUG)
Log.d("onlayout", "parentleft: " + parentLeft + " parenttop: "
+ parentTop + " parentright: " + parentRight
+ " parentbottom: " + parentBottom);
int left = parentLeft;
int top = parentTop;
int count = getChildCount();
for (int i = 0; i < count; ++i) {
View v = getChildAt(i);
if (v.getVisibility() != View.GONE) {
final int childWidth = v.getMeasuredWidth();
final int childHeight = v.getMeasuredHeight();
v.layout(left, top, left + childWidth, top + childHeight);
left += childWidth;
}
}
}
上面的layout方法写的比较简单，就是简单的计算出每个子View的left值，然后调用view的layout方法即可。
现在我们加上xml布局文件，来看一下效果：
<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
android:layout_width="match_parent"
android:layout_height="match_parent"
android:orientation="vertical" >
<com.example.testslidelistview.SlideGroup
android:id="@+id/sl"
android:layout_width="match_parent"
android:layout_height="500dp"
android:layout_marginTop="50dp"
android:background="#FFFF00" >
<ImageView
android:id="@+id/iv1"
android:layout_width="150dp"
android:layout_height="300dp"
android:scaleType="fitXY"
android:src="@drawable/lead_page_1" />
<ImageView
android:layout_width="150dp"
android:layout_height="300dp"
android:scaleType="fitXY"
android:src="@drawable/lead_page_2" />
<ImageView
android:layout_width="150dp"
android:layout_height="300dp"
android:scaleType="fitXY"
android:src="@drawable/lead_page_3" />
</com.example.testslidelistview.SlideGroup>
</LinearLayout>
效果图如下：
从效果图中我们看到，3个小图连在一起（因为现在不支持margin），然后我们也没办法让他们垂直居中（因为现在还不支持gravity）。
现在我们首先为咱们的ViewGroup增加一个支持margin和gravity的LayoutParams。
@Override
protected android.view.ViewGroup.LayoutParams generateDefaultLayoutParams() {
return new LayoutParams(ViewGroup.LayoutParams.MATCH_PARENT,
ViewGroup.LayoutParams.MATCH_PARENT);
}
@Override
public android.view.ViewGroup.LayoutParams generateLayoutParams(
AttributeSet attrs) {
return new LayoutParams(getContext(), attrs);
}
@Override
protected android.view.ViewGroup.LayoutParams generateLayoutParams(
android.view.ViewGroup.LayoutParams p) {
return new LayoutParams(p);
}
public static class LayoutParams extends MarginLayoutParams {
public int gravity = -1;
public LayoutParams(Context c, AttributeSet attrs) {
super(c, attrs);
TypedArray ta = c.obtainStyledAttributes(attrs,
R.styleable.SlideGroup);
gravity = ta.getInt(R.styleable.SlideGroup_layout_gravity, -1);
ta.recycle();
}
public LayoutParams(int width, int height) {
this(width, height, -1);
}
public LayoutParams(int width, int height, int gravity) {
super(width, height);
this.gravity = gravity;
}
public LayoutParams(android.view.ViewGroup.LayoutParams source) {
super(source);
}
public LayoutParams(MarginLayoutParams source) {
super(source);
}
}
xml的自定义属性如下：
<?xml version="1.0" encoding="utf-8"?>
<resources>
<attr name="layout_gravity">
<!-- Push object to the top of its container, not changing its size. -->
<flag name="top" value="0x30" />
<!-- Push object to the bottom of its container, not changing its size. -->
<flag name="bottom" value="0x50" />
<!-- Push object to the left of its container, not changing its size. -->
<flag name="left" value="0x03" />
<!-- Push object to the right of its container, not changing its size. -->
<flag name="right" value="0x05" />
<!-- Place object in the vertical center of its container, not changing its size. -->
<flag name="center_vertical" value="0x10" />
<!-- Place object in the horizontal center of its container, not changing its size. -->
<flag name="center_horizontal" value="0x01" />
</attr>
<declare-styleable name="SlideGroup">
<attr name="layout_gravity" />
</declare-styleable>
</resources>
现在基本的准备工作差不多了，然后需要修改一下onMeasure（）和onLayout（）。
onMeasure（）：（上一个版本，我们在计算最大宽度和高度时忽略了margin）
@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
// 计算所有child view 要占用的空间
desireWidth = 0;
desireHeight = 0;
int count = getChildCount();
for (int i = 0; i < count; ++i) {
View v = getChildAt(i);
if (v.getVisibility() != View.GONE) {
LayoutParams lp = (LayoutParams) v.getLayoutParams();
//将measureChild改为measureChildWithMargin
measureChildWithMargins(v, widthMeasureSpec, 0,
heightMeasureSpec, 0);
//这里在计算宽度时加上margin
desireWidth += v.getMeasuredWidth() + lp.leftMargin + lp.rightMargin;
desireHeight = Math
.max(desireHeight, v.getMeasuredHeight() + lp.topMargin + lp.bottomMargin);
}
}
// count with padding
desireWidth += getPaddingLeft() + getPaddingRight();
desireHeight += getPaddingTop() + getPaddingBottom();
// see if the size is big enough
desireWidth = Math.max(desireWidth, getSuggestedMinimumWidth());
desireHeight = Math.max(desireHeight, getSuggestedMinimumHeight());
setMeasuredDimension(resolveSize(desireWidth, widthMeasureSpec),
resolveSize(desireHeight, heightMeasureSpec));
}
onLayout（）（加上margin和gravity）
@Override
protected void onLayout(boolean changed, int l, int t, int r, int b) {
final int parentLeft = getPaddingLeft();
final int parentRight = r - l - getPaddingRight();
final int parentTop = getPaddingTop();
final int parentBottom = b - t - getPaddingBottom();
if (BuildConfig.DEBUG)
Log.d("onlayout", "parentleft: " + parentLeft + " parenttop: "
+ parentTop + " parentright: " + parentRight
+ " parentbottom: " + parentBottom);
int left = parentLeft;
int top = parentTop;
int count = getChildCount();
for (int i = 0; i < count; ++i) {
View v = getChildAt(i);
if (v.getVisibility() != View.GONE) {
LayoutParams lp = (LayoutParams) v.getLayoutParams();
final int childWidth = v.getMeasuredWidth();
final int childHeight = v.getMeasuredHeight();
final int gravity = lp.gravity;
final int horizontalGravity = gravity
& Gravity.HORIZONTAL_GRAVITY_MASK;
final int verticalGravity = gravity
& Gravity.VERTICAL_GRAVITY_MASK;
left += lp.leftMargin;
top = parentTop + lp.topMargin;
if (gravity != -1) {
switch (verticalGravity) {
case Gravity.TOP:
break;
case Gravity.CENTER_VERTICAL:
top = parentTop
+ (parentBottom - parentTop - childHeight)
/ 2 + lp.topMargin - lp.bottomMargin;
break;
case Gravity.BOTTOM:
top = parentBottom - childHeight - lp.bottomMargin;
break;
}
}
if (BuildConfig.DEBUG) {
Log.d("onlayout", "child[width: " + childWidth
+ ", height: " + childHeight + "]");
Log.d("onlayout", "child[left: " + left + ", top: "
+ top + ", right: " + (left + childWidth)
+ ", bottom: " + (top + childHeight));
}
v.layout(left, top, left + childWidth, top + childHeight);
left += childWidth + lp.rightMargin;
}
}
}
现在修改一下xml布局文件，加上例如xmlns:ly="http://schemas.android.com/apk/res-auto"，的xml命名空间，来引用我们设置的layout_gravity属性。（这里的“res-auto”其实还可以使用res/com/example/testslidelistview来代替，但是前一种方法相对简单，尤其是当你将某个ui组件作为library来使用的时候）
现在的效果图如下：有了margin，有了gravity。
其实在这个基础上，我们可以很容易的添加一个方向属性，使得它可以通过设置一个xml属性或者一个java api调用来实现垂直排列。
下面我们增加一个用于表示方向的枚举类型：
public static enum Orientation {
HORIZONTAL(0), VERTICAL(1);
private int value;
private Orientation(int i) {
value = i;
}
public int value() {
return value;
}
public static Orientation valueOf(int i) {
switch (i) {
case 0:
return HORIZONTAL;
case 1:
return VERTICAL;
default:
throw new RuntimeException("[0->HORIZONTAL, 1->VERTICAL]");
}
}
}
然后我们需要改变onMeasure（），来正确的根据方向计算需要的最大宽度和高度。
@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
// 计算所有child view 要占用的空间
desireWidth = 0;
desireHeight = 0;
int count = getChildCount();
for (int i = 0; i < count; ++i) {
View v = getChildAt(i);
if (v.getVisibility() != View.GONE) {
LayoutParams lp = (LayoutParams) v.getLayoutParams();
measureChildWithMargins(v, widthMeasureSpec, 0,
heightMeasureSpec, 0);
//只是在这里增加了垂直或者水平方向的判断
if (orientation == Orientation.HORIZONTAL) {
desireWidth += v.getMeasuredWidth() + lp.leftMargin
+ lp.rightMargin;
desireHeight = Math.max(desireHeight, v.getMeasuredHeight()
+ lp.topMargin + lp.bottomMargin);
} else {
desireWidth = Math.max(desireWidth, v.getMeasuredWidth()
+ lp.leftMargin + lp.rightMargin);
desireHeight += v.getMeasuredHeight() + lp.topMargin
+ lp.bottomMargin;
}
}
}
// count with padding
desireWidth += getPaddingLeft() + getPaddingRight();
desireHeight += getPaddingTop() + getPaddingBottom();
// see if the size is big enough
desireWidth = Math.max(desireWidth, getSuggestedMinimumWidth());
desireHeight = Math.max(desireHeight, getSuggestedMinimumHeight());
setMeasuredDimension(resolveSize(desireWidth, widthMeasureSpec),
resolveSize(desireHeight, heightMeasureSpec));
}
onLayout（）：
@Override
protected void onLayout(boolean changed, int l, int t, int r, int b) {
final int parentLeft = getPaddingLeft();
final int parentRight = r - l - getPaddingRight();
final int parentTop = getPaddingTop();
final int parentBottom = b - t - getPaddingBottom();
if (BuildConfig.DEBUG)
Log.d("onlayout", "parentleft: " + parentLeft + " parenttop: "
+ parentTop + " parentright: " + parentRight
+ " parentbottom: " + parentBottom);
int left = parentLeft;
int top = parentTop;
int count = getChildCount();
for (int i = 0; i < count; ++i) {
View v = getChildAt(i);
if (v.getVisibility() != View.GONE) {
LayoutParams lp = (LayoutParams) v.getLayoutParams();
final int childWidth = v.getMeasuredWidth();
final int childHeight = v.getMeasuredHeight();
final int gravity = lp.gravity;
final int horizontalGravity = gravity
& Gravity.HORIZONTAL_GRAVITY_MASK;
final int verticalGravity = gravity
& Gravity.VERTICAL_GRAVITY_MASK;
if (orientation == Orientation.HORIZONTAL) {
// layout horizontally, and only consider vertical gravity
left += lp.leftMargin;
top = parentTop + lp.topMargin;
if (gravity != -1) {
switch (verticalGravity) {
case Gravity.TOP:
break;
case Gravity.CENTER_VERTICAL:
top = parentTop
+ (parentBottom - parentTop - childHeight)
/ 2 + lp.topMargin - lp.bottomMargin;
break;
case Gravity.BOTTOM:
top = parentBottom - childHeight - lp.bottomMargin;
break;
}
}
if (BuildConfig.DEBUG) {
Log.d("onlayout", "child[width: " + childWidth
+ ", height: " + childHeight + "]");
Log.d("onlayout", "child[left: " + left + ", top: "
+ top + ", right: " + (left + childWidth)
+ ", bottom: " + (top + childHeight));
}
v.layout(left, top, left + childWidth, top + childHeight);
left += childWidth + lp.rightMargin;
} else {
// layout vertical, and only consider horizontal gravity
left = parentLeft;
top += lp.topMargin;
switch (horizontalGravity) {
case Gravity.LEFT:
break;
case Gravity.CENTER_HORIZONTAL:
left = parentLeft
+ (parentRight - parentLeft - childWidth) / 2
+ lp.leftMargin - lp.rightMargin;
break;
case Gravity.RIGHT:
left = parentRight - childWidth - lp.rightMargin;
break;
}
v.layout(left, top, left + childWidth, top + childHeight);
top += childHeight + lp.bottomMargin;
}
}
}
}
现在我们可以增加一个xml属性：
<attr name="orientation">
<enum name="horizontal" value="0" />
<enum name="vertical" value="1" />
</attr>
现在就可以在布局文件中加入ly:orientation="vertical"来实现垂直排列了（ly是自定义的xml命名空间）
布局文件如下：
<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
android:layout_width="match_parent"
android:layout_height="match_parent"
android:orientation="vertical" >
<com.example.testslidelistview.SlideGroup
xmlns:gs="http://schemas.android.com/apk/res-auto"
android:id="@+id/sl"
android:layout_width="match_parent"
android:layout_height="match_parent"
android:layout_marginTop="50dp"
android:background="#FFFF00" >
<ImageView
android:id="@+id/iv1"
android:layout_width="300dp"
android:layout_height="200dp"
android:layout_marginBottom="20dp"
gs:layout_gravity="left"
android:scaleType="fitXY"
android:src="@drawable/lead_page_1" />
<ImageView
android:layout_width="300dp"
android:layout_height="200dp"
android:layout_marginBottom="20dp"
gs:layout_gravity="center_horizontal"
android:scaleType="fitXY"
android:src="@drawable/lead_page_2" />
<ImageView
android:layout_width="300dp"
android:layout_height="200dp"
android:layout_marginBottom="20dp"
gs:layout_gravity="right"
android:scaleType="fitXY"
android:src="@drawable/lead_page_3" />
</com.example.testslidelistview.SlideGroup>
</LinearLayout>
现在效果图如下：
现在基本上是实现了一个简单的基于ViewGroup的layout，但是从上面的图中可以看出，第三张都没有显示完整，那么为了能够显示更多的内容，我们需要支持滑动，那就涉及到onTouchEvent（），以及Scroller的使用，这些就在下一篇中记录吧。。。（自定义ViewGroup (2)支持滑动，并处理多指触摸可能产生的跳动问题）