标准C语言中的字符串处理函数

Refference: http://blog.chinaunix.net/u1/56388/showart_2059483.html

函数名: stpcpy 功 能: 拷贝一个字符串到另一个 用 法: char *stpcpy(char *destin, char *source); 程序例: #include <stdio.h> #include <string.h> int main(void) { char string[10]; char *str1 = "abcdefghi"; stpcpy(string, str1); printf("%s/n", string); return 0; } 函数名: strcat 功 能: 字符串拼接函数 用 法: char *strcat(char *destin, char *source); 程序例: #include <string.h> #include <stdio.h> int main(void) { char destination[25]; char *blank = " ", *c = "C++", *Borland = "Borland"; strcpy(destination, Borland); strcat(destination, blank); strcat(destination, c); printf("%s/n", destination); return 0; } 函数名: strchr 功 能: 在一个串中查找给定字符的第一个匹配之处/ 用 法: char *strchr(char *str, char c); 程序例: #include <string.h> #include <stdio.h> int main(void) { char string[15]; char *ptr, c = 'r'; strcpy(string, "This is a string"); ptr = strchr(string, c); if (ptr) printf("The character %c is at position: %d/n", c, ptr-string); else printf("The character was not found/n"); return 0; } 函数名: strcmp 功 能: 串比较 用 法: int strcmp(char *str1, char *str2); 看Asic码，str1>str2，返回值 > 0；两串相等，返回0 程序例: #include <string.h> #include <stdio.h> int main(void) { char *buf1 = "aaa", *buf2 = "bbb", *buf3 = "ccc"; int ptr; ptr = strcmp(buf2, buf1); if (ptr > 0) printf("buffer 2 is greater than buffer 1/n"); else printf("buffer 2 is less than buffer 1/n"); ptr = strcmp(buf2, buf3); if (ptr > 0) printf("buffer 2 is greater than buffer 3/n"); else printf("buffer 2 is less than buffer 3/n"); return 0; } 函数名: strncmpi 功 能: 将一个串中的一部分与另一个串比较, 不管大小写 用 法: int strncmpi(char *str1, char *str2, unsigned maxlen); 程序例: #include <string.h> #include <stdio.h> int main(void) { char *buf1 = "BBB", *buf2 = "bbb"; int ptr; ptr = strcmpi(buf2, buf1); if (ptr > 0) printf("buffer 2 is greater than buffer 1/n"); if (ptr < 0) printf("buffer 2 is less than buffer 1/n"); if (ptr == 0) printf("buffer 2 equals buffer 1/n"); return 0; } 函数名: strcpy 功 能: 串拷贝 用 法: char *strcpy(char *str1, char *str2); 程序例: #include <stdio.h> #include <string.h> int main(void) { char string[10]; char *str1 = "abcdefghi"; strcpy(string, str1); printf("%s/n", string); return 0; } 函数名: strcspn 功 能: 在串中查找第一个给定字符集内容的段 用 法: int strcspn(char *str1, char *str2); 程序例: #include <stdio.h> #include <string.h> #include <alloc.h> int main(void) { char *string1 = "1234567890"; char *string2 = "747DC8"; int length; length = strcspn(string1, string2); printf("Character where strings intersect is at position %d/n", length); return 0; } 函数名: strdup 功 能: 将串拷贝到新建的位置处 用 法: char *strdup(char *str); 程序例: #include <stdio.h> #include <string.h> #include <alloc.h> int main(void) { char *dup_str, *string = "abcde"; dup_str = strdup(string); printf("%s/n", dup_str); free(dup_str); return 0; } 函数名: stricmp 功 能: 以大小写不敏感方式比较两个串 用 法: int stricmp(char *str1, char *str2); 程序例: #include <string.h> #include <stdio.h> int main(void) { char *buf1 = "BBB", *buf2 = "bbb"; int ptr; ptr = stricmp(buf2, buf1); if (ptr > 0) printf("buffer 2 is greater than buffer 1/n"); if (ptr < 0) printf("buffer 2 is less than buffer 1/n"); if (ptr == 0) printf("buffer 2 equals buffer 1/n"); return 0; } 函数名: strerror 功 能: 返回指向错误信息字符串的指针 用 法: char *strerror(int errnum); 程序例: #include <stdio.h> #include <errno.h> int main(void) { char *buffer; buffer = strerror(errno); printf("Error: %s/n", buffer); return 0; } 函数名: strcmpi 功 能: 将一个串与另一个比较, 不管大小写 用 法: int strcmpi(char *str1, char *str2); 程序例: #include <string.h> #include <stdio.h> int main(void) { char *buf1 = "BBB", *buf2 = "bbb"; int ptr; ptr = strcmpi(buf2, buf1); if (ptr > 0) printf("buffer 2 is greater than buffer 1/n"); if (ptr < 0) printf("buffer 2 is less than buffer 1/n"); if (ptr == 0) printf("buffer 2 equals buffer 1/n"); return 0; } 函数名: strncmp 功 能: 串比较 用 法: int strncmp(char *str1, char *str2, int maxlen); 程序例: #include <string.h> #include <stdio.h> int main(void) { char *buf1 = "aaabbb", *buf2 = "bbbccc", *buf3 = "ccc"; int ptr; ptr = strncmp(buf2,buf1,3); if (ptr > 0) printf("buffer 2 is greater than buffer 1/n"); else printf("buffer 2 is less than buffer 1/n"); ptr = strncmp(buf2,buf3,3); if (ptr > 0) printf("buffer 2 is greater than buffer 3/n"); else printf("buffer 2 is less than buffer 3/n"); return(0); } 函数名: strncmpi 功 能: 把串中的一部分与另一串中的一部分比较, 不管大小写 用 法: int strncmpi(char *str1, char *str2); 程序例: #include <string.h> #include <stdio.h> int main(void) { char *buf1 = "BBBccc", *buf2 = "bbbccc"; int ptr; ptr = strncmpi(buf2,buf1,3); if (ptr > 0) printf("buffer 2 is greater than buffer 1/n"); if (ptr < 0) printf("buffer 2 is less than buffer 1/n"); if (ptr == 0) printf("buffer 2 equals buffer 1/n"); return 0; } 函数名: strncpy 功 能: 串拷贝 用 法: char *strncpy(char *destin, char *source, int maxlen); 程序例: #include <stdio.h> #include <string.h> int main(void) { char string[10]; char *str1 = "abcdefghi"; strncpy(string, str1, 3); string[3] = '/0'; printf("%s/n", string); return 0; } 函数名: strnicmp 功 能: 不注重大小写地比较两个串 用 法: int strnicmp(char *str1, char *str2, unsigned maxlen); 程序例: #include <string.h> #include <stdio.h> int main(void) { char *buf1 = "BBBccc", *buf2 = "bbbccc"; int ptr; ptr = strnicmp(buf2, buf1, 3); if (ptr > 0) printf("buffer 2 is greater than buffer 1/n"); if (ptr < 0) printf("buffer 2 is less than buffer 1/n"); if (ptr == 0) printf("buffer 2 equals buffer 1/n"); return 0; } 函数名: strnset 功 能: 将一个串中的所有字符都设为指定字符 用 法: char *strnset(char *str, char ch, unsigned n); 程序例: #include <stdio.h> #include <string.h> int main(void) { char *string = "abcdefghijklmnopqrstuvwxyz"; char letter = 'x'; printf("string before strnset: %s/n", string); strnset(string, letter, 13); printf("string after strnset: %s/n", string); return 0; } 函数名: strpbrk 功 能: 在串中查找给定字符集中的字符 用 法: char *strpbrk(char *str1, char *str2); 程序例: #include <stdio.h> #include <string.h> int main(void) { char *string1 = "abcdefghijklmnopqrstuvwxyz"; char *string2 = "onm"; char *ptr; ptr = strpbrk(string1, string2); if (ptr) printf("strpbrk found first character: %c/n", *ptr); else printf("strpbrk didn't find character in set/n"); return 0; } 函数名: strrchr 功 能: 在串中查找指定字符的最后一个出现 用 法: char *strrchr(char *str, char c); 程序例: #include <string.h> #include <stdio.h> int main(void) { char string[15]; char *ptr, c = 'r'; strcpy(string, "This is a string"); ptr = strrchr(string, c); if (ptr) printf("The character %c is at position: %d/n", c, ptr-string); else printf("The character was not found/n"); return 0; } 函数名: strrev 功 能: 串倒转 用 法: char *strrev(char *str); 程序例: #include <string.h> #include <stdio.h> int main(void) { char *forward = "string"; printf("Before strrev(): %s/n", forward); strrev(forward); printf("After strrev(): %s/n", forward); return 0; } 函数名: strset 功 能: 将一个串中的所有字符都设为指定字符 用 法: char *strset(char *str, char c); 程序例: #include <stdio.h> #include <string.h> int main(void) { char string[10] = "123456789"; char symbol = 'c'; printf("Before strset(): %s/n", string); strset(string, symbol); printf("After strset(): %s/n", string); return 0; } 函数名: strspn 功 能: 在串中查找指定字符集的子集的第一次出现 用 法: int strspn(char *str1, char *str2); 程序例: #include <stdio.h> #include <string.h> #include <alloc.h> int main(void) { char *string1 = "1234567890"; char *string2 = "123DC8"; int length; length = strspn(string1, string2); printf("Character where strings differ is at position %d/n", length); return 0; } 函数名: strstr 功 能: 在串中查找指定字符串的第一次出现 用 法: char *strstr(char *str1, char *str2); 程序例: #include <stdio.h> #include <string.h> int main(void) { char *str1 = "Borland International", *str2 = "nation", *ptr; ptr = strstr(str1, str2); printf("The substring is: %s/n", ptr); return 0; } 函数名: strtod 功 能: 将字符串转换为double型值 用 法: double strtod(char *str, char **endptr); 程序例: #include <stdio.h> #include <stdlib.h> int main(void) { char input[80], *endptr; double value; printf("Enter a floating point number:"); gets(input); value = strtod(input, &endptr); printf("The string is %s the number is %lf/n", input, value); return 0; } 函数名: strtok 功 能: 查找由在第二个串中指定的分界符分隔开的单词 用 法: char *strtok(char *str1, char *str2); 程序例: #include <string.h> #include <stdio.h> int main(void) { char input[16] = "abc,d"; char *p; /* strtok places a NULL terminator in front of the token, if found */ p = strtok(input, ","); if (p) printf("%s/n", p); /* A second call to strtok using a NULL as the first parameter returns a pointer to the character following the token */ p = strtok(NULL, ","); if (p) printf("%s/n", p); return 0; } 函数名: strtol 功 能: 将串转换为长整数 用 法: long strtol(char *str, char **endptr, int base); 程序例: #include <stdlib.h> #include <stdio.h> int main(void) { char *string = "87654321", *endptr; long lnumber; /* strtol converts string to long integer */ lnumber = strtol(string, &endptr, 10); printf("string = %s long = %ld/n", string, lnumber); return 0; } 函数名: strupr 功 能: 将串中的小写字母转换为大写字母 用 法: char *strupr(char *str); 程序例: #include <stdio.h> #include <string.h> int main(void) { char *string = "abcdefghijklmnopqrstuvwxyz", *ptr; /* converts string to upper case characters */ ptr = strupr(string); printf("%s/n", ptr); return 0; } 函数名: swab 功 能: 交换字节 用 法: void swab (char *from, char *to, int nbytes); 程序例: #include <stdlib.h> #include <stdio.h> #include <string.h> char source[15] = "rFna koBlrna d"; char target[15]; int main(void) { swab(source, target, strlen(source)); printf("This is target: %s/n", target); return 0; }