OnHub不支持WEP和WPA

Devices compatible with OnHub

Although most devices are compatible with OnHub, there are a few that aren’t. Usually, this is because they lack the hardware or software supported by OnHub. See below for a list of incompatible devices.

If you have any questions, please don’t hesitate to contact us. We’ll do our best to help.

WPA and WEP devices

OnHub only supports devices with WPA2 + AES, which is the most popular method of securing your network. Older devices that only have WPA or WEP encryption (like old printers) will not be able to connect to OnHub.

We do not support older protocols because they have been deemed unsecure by the Wi-Fi Alliance, the security research community and industry experts. OnHub keeps you safe, and WPA2 is one of the many ways we ensure that.

Workaround: Upgrade the device's Wi-Fi hardware (e.g. You can upgrade an old laptop’s Wi-Fi card). If the Wi-Fi hardware cannot be upgraded, the device may need to be replaced with a newer version that supports the newer, secure protocols.

SkyBell

Unfortunately, SkyBell cannot connect to your OnHub. This is because your OnHub creates a single network that uses both 2.4 and 5GHz bands. SkyBell only connects to 2.4GHz networks. When there is a single network spanning both bands, SkyBell is unable to connect to the 2.4GHz network. Learn more about OnHub’s bands.

Workaround: Unfortunately, there is no workaround at this time.

地址： https://support.google.com/onhub/answer/6304954?hl=en