使用maxima解决初等数论中的问题:


                   

                                                   Elementary number theory using Maxima 

                                                                                         -- mvngu


Prime numbers


You might remember that for any integer  greater than 1,  is a prime number if its factors are 1 and itself. The integers 2, 3, 5, and 7 are primes, but 9 is not prime because 9 = 3^2 = 3 .times 3. The command primep() is useful for testing whether or not an integer is prime:

(%i1) primep(2);
(%o1)                                true
(%i2) primep(3);
(%o2)                                true
(%i3) primep(5);
(%o3)                                true
(%i4) primep(7);
(%o4)                                true
(%i5) primep(9);
(%o5)                                false

And the command next_prime(n) returns the next prime number greater than or equal to :

(%i6) next_prime(9);
(%o6)                                 11
(%i7) next_prime(11);
(%o7)                                 13
(%i8) next_prime(13);
(%o8)                                 17
(%i9) next_prime(17);
(%o9)                                 19
(%i10) next_prime(19);
(%o10)                                23

Let’s now define a function called primes_first_n() in Maxima to return a list of the first  primes, where  is a positive integer. Programming in the Maxima language is different from programming in other languages like C,C++, and Java. For example, if your variable is be assigned a number, you don’t need to define whether your variable is of type int, long, double, or bool. All you have to do is use the colon operator “:” to assign some value to a variable, like in the following example.

(%i50) num : 13$
(%i51) num;
(%o51)                                13
(%i52) str : "my string"$
(%i53) str;
(%o53)                             my string
(%i54) L : ["a", "list", "of", "strings"]$
(%i55) L;
(%o55)                      [a, list, of, strings]

Before defining the function primes_first_n(), there are two useful built-in Maxima functions that you should know about. These are append() and last(). The function append() can be used to append an element to a list, whereaslast() can be used to return the last element of a list:

(%i56) L : ["a", "list"];
(%o56)                             [a, list]
(%i57) L : append(L, ["of", "strings"]);
(%o57)                      [a, list, of, strings]
(%i58) L;
(%o58)                      [a, list, of, strings]
(%i59) last(L);
(%o59)                              strings

Below is the function primes_first_n() which pulls together the features of next_prime(n), append(), and last(). Notice that it is defined at the Maxima command line interface.

(%i60) primes_first_n(n) := (
           if n < 1 then
               []
           else (
               L : [2],
               for i:2 thru n do (
                   L : append(L, [next_prime(last(L))])
               ),
               L
           )
       )$

You can also put the above function inside a text file called, say, /home/mvngu/primes.mac with the following content:

/* Return the first n prime numbers.
 *
 * INPUT:
 *
 * - n -- a positive integer greater than 1.
 *
 * OUTPUT:
 *
 * - A list of the first n prime numbers. If n is less than 1, then return
 *   an empty list.
 */
primes_first_n(n) := (
    if n < 1 then
        []
    else (
        L : [2],
        for i:2 thru n do (
            L : append(L, [next_prime(last(L))])
        ),
        L
    )
)$

Like C++ and Java, Maxima also uses “/*” to denote the beginning of a comment block and “*/” to denote the end of a comment block. To load the content of the file /home/mvngu/primes.mac into Maxima, you use the command load(). Let’s load the above file and experiment with the custom-defined function primes_first_n():

(%i64) load("/home/mvngu/primes.mac");
(%o64)                      /home/mvngu/primes.mac
(%i65) primes_first_n(0);
(%o65)                                []
(%i66) primes_first_n(-1);
(%o66)                                []
(%i67) primes_first_n(-2);
(%o67)                                []
(%i68) primes_first_n(1);
(%o68)                                [2]
(%i69) primes_first_n(2);
(%o69)                              [2, 3]
(%i70) primes_first_n(3);
(%o70)                             [2, 3, 5]
(%i71) primes_first_n(10);
(%o71)               [2, 3, 5, 7, 11, 13, 17, 19, 23, 29]

Factorizing integers

Integer factorization is about breaking up an integer into smaller components. In number theory, these smaller components are usually the prime factors of the integer. Use the command ifactors() to compute the prime factors of positive integers:

(%i76) ifactors(10);
(%o76)                         [[2, 1], [5, 1]]
(%i77) (2^1) * (5^1);
(%o77)                                10
(%i78) ifactors(25);
(%o78)                             [[5, 2]]
(%i79) 5^2;
(%o79)                                25
(%i80) ifactors(62);
(%o80)                         [[2, 1], [31, 1]]
(%i81) ifactors(72);
(%o81)                         [[2, 3], [3, 2]]
(%i82) (2^3) * (3^2);
(%o82)                                72

The prime factors of 10 are 2^1 = 2 and . When you multiply these two prime factors together, you end up with . The expression 2^1 .times 5^1 is called the prime factorization of 10. Similarly, the expression 5^2 is the prime factorization of 25, and  is the prime factorization of 72.

Greatest common divisors

Closely related to integer factorization is the concept of greatest common divisor (GCD). The Maxima commandgcd() is able to compute the GCD of two expressions e_1 and  where this makes sense. These two expressions may be integers, polynomials, or some objects for which it makes sense to compute their GCD. For the moment, let’s just work with integers:

(%i1) gcd(9, 12);
(%o1)                                  3
(%i2) gcd(21, 49);
(%o2)                                  7
(%i3) gcd(22, 11);
(%o3)                                 11

The GCD of two integers a and  can be recursively defined as follows:

.gcd(a,b) = .begin{cases} a & .text{if } b = 0 .. .gcd(b, a .bmod b) & .text{otherwise} .end{cases}

where a .bmod b is the remainder when a is divided by . The above recursive definition can be easily translated to a Maxima function for integer GCD as follows (credit goes to amca for the Maxima code):

/* Return the greatest common divisor (GCD) of two integers a and b.
 *
 * INPUT:
 *
 * - a -- an integer
 * - b -- an integer
 *
 * OUTPUT:
 *
 * - The greatest common divisor of a and b.
 */
igcd(a, b) := block(
    if b = 0 then
        return(a)
    else
        return( igcd(b, mod(a,b)) )
);

Save the above code to a text file and load it first before using the function. Or you can define the function from the Maxima command line interface and proceed to use it:

(%i5) igcd(a, b) := block(
          if b = 0 then
              return(a)
          else
              return( igcd(b, mod(a,b)) )
      )$
(%i6) igcd(9, 12);
(%o6)                                  3
(%i7) igcd(21, 49);
(%o7)                                  7
(%i8) igcd(22, 11);
(%o8)                                 11

The extended Euclidean algorithm provides an interesting relationship between .gcd(a,b), and the pair a and . Here is a Maxima function definition courtesy of amca:

/* Apply the extended Euclidean algorithm to compute integers s and t such
 * that gcd(a,b) = as + bt.
 *
 * INPUT:
 *
 * - a -- an integer
 * - b -- an integer
 *
 * OUTPUT:
 *
 * - A triple of integers (s, t, d) satisfying the relationship 
 *   d = gcd(a,b) = as + bt. This algorithm does not guarantee that s and t
 *   are unique. There may be other pairs of s and t that satisfy the requirement.
 */
igcdex(a,b) := block(
    [d, x, y, d1, x1, y1],
    if b = 0 then
        return([1, 0, a])
    else (
        [x1, y1, d1] : igcdex(b, mod(a,b)),
        [x, y, d] : [y1, x1 - quotient(a,b)*y1, d1],
        return([x, y, d])
    )
);

Or you can define it from the Maxima command line:

(%i9) igcdex(a,b) := block(
          [d, x, y, d1, x1, y1],
          if b = 0 then
              return([1, 0, a])
          else (
              [x1, y1, d1] : igcdex(b, mod(a,b)),
              [x, y, d] : [y1, x1 - quotient(a,b)*y1, d1],
              return([x, y, d])
          )
      )$

Let’s use the function igcdex() for various pairs of integers and verify the result.

(%i15) igcdex(120, 23);
(%o15)                           [- 9, 47, 1]
(%i16) 120*(-9) + 23*47;
(%o16)                                 1
(%i17) igcdex(2000, 2009);
(%o17)                          [- 893, 889, 1]
(%i18) 2000*(-893) + 2009*889;
(%o18)                                 1
(%i19) igcdex(24, 56);
(%o19)                            [- 2, 1, 8]
(%i20) 24*(-2) + 56*1;
(%o20)                                 8


Comments (6)  Trackbacks (0)  Leave a comment  Trackback
  1. Konstantinos
    31 October 2009 at 8:37 pm |  #1
    Quote 

    Hello!If i want to make the extended Euclidean algorithm for polynomials what chabges should i do?i can not understant how i define polynomials. I am little confused!I also want to ask if you have a good online manual for maxima.Thanks for your help.

  2. mvngu
    1 November 2009 at 6:26 am |  #2
    Quote

    > Hello!If i want to make the extended Euclidean algorithm
    > for polynomials what chabges should i do?i can not understant
    > how i define polynomials.

    You should direct this question to the Maxima mailing list. See

    http://maxima.sourceforge.net/maximalist.html

    > I am little confused!I also want to ask if you have a
    > good online manual for maxima.Thanks for your help.

    You should consult the documentation on the Maxima website. See

    http://maxima.sourceforge.net/documentation.html

  3. Konstantinos
    1 November 2009 at 11:59 am |  #3
    Quote

    Thanks but i have already solved my problem.Thanks for your help!!!

  4. Konstantinos
    29 November 2009 at 11:01 am |  #4
    Quote

    Hello!Can anyone tell me if there is a function in maxima about the chinese remainder theorem?Thanks for your time!

  5. mvngu
    29 November 2009 at 12:46 pm |  #5
    Quote

    Hi Konstantinos,

    The following Maxima function implements the Chinese remainder theorem:

    crt(A, M) := block(
        Mprod : product(M[i], i, 1, length(M)),
        Mdiv : map(lambda([x], Mprod / x), M),
        X : map(inv_mod, Mdiv, M),
        x : sum(A[i]*X[i]*Mdiv[i], i, 1, length(M)),
        return(mod(x, Mprod))
    )$
    

    The list A contains integers you want to solve for, and M is a list of moduli. Here are some examples on using the function crt():

    %i1) load("crt.mac");
    (%o1)                               crt.mac
    (%i2) A : [2, 3, 1]$
    (%i3) M : [3, 4, 5]$
    (%i4) x : crt(A, M);
    (%o4)                                 11
    (%i5) mod(x, 3);
    (%o5)                                  2
    (%i6) mod(x, 4);
    (%o6)                                  3
    (%i7) mod(x, 5);
    (%o7)                                  1
    (%i8) A : [4, 7, 3]$
    (%i9) M : [5, 8, 9]$
    (%i10) x : crt(A, M);
    (%o10)                                39
    (%i11) mod(x, 5);
    (%o11)                                 4
    (%i12) mod(x, 8);
    (%o12)                                 7
    (%i13) mod(x, 9);
    (%o13)                                 3
    
  6. Konstantinos
    29 November 2009 at 1:31 pm |  #6
    Quote

    Thanks a lot for your help!!!!


        相关链接: http://mvngu.wordpress.com/2009/08/25/elementary-number-theory-using-maxima/

Categories:documentation, Maxima, number theory, programming, symbolic computationTags:computer algebra system, mathematics, maxima, number theory, open source software,programming, symbolic computation




 


你可能感兴趣的:(使用maxima解决初等数论中的问题:)