[ubuntu server 16.04下的安装脚本] 8.Ubuntu16.04一键安装STF

1.前提:本机已安装Android SDK和nodejs

未安装Android SDK和nodejs，分别参考下文：
1.《[ubuntu server 16.04下的安装脚本] 7.一键安装 android sdk》
2.《[ubuntu server 16.04下的安装脚本] 9.一键安装 nodejs》

---

2.Ubuntu16.04一键安装STF脚本：

#!/bin/bash 

#sudo npm install -g node-gyp
#安装RethinkBD

#source /etc/lsb-release && echo "deb http://download.rethinkdb.com/apt $DISTRIB_CODENAME main" | sudo tee /etc/apt/sources.list.d/rethinkdb.list wget -qO- http://download.rethinkdb.com/apt/pubkey.gpg | sudo apt-key add -
source /etc/lsb-release && echo "deb http://download.rethinkdb.com/apt $DISTRIB_CODENAME main" | tee /etc/apt/sources.list.d/rethinkdb.list | wget -qO- http://download.rethinkdb.com/apt/pubkey.gpg | sudo apt-key add -


sudo apt-get update

sudo apt-get install -y rethinkdb
sudo cp /etc/rethinkdb/default.conf.sample /etc/rethinkdb/instances.d/instance1.conf
sudo service rethinkdb stop

#安装graphicsmagick
sudo apt-get install -y  graphicsmagick

sudo apt-get install -y libzmq3-dev

sudo apt-get install -y  libprotobuf-dev

#------------------------------------------------------------------------

#安装protobuf-all

#wget https://github.com/google/protobuf/releases/download/v3.5.1/protobuf-all-3.5.1.tar.gz
wget https://coding.net/u/jamesz2011/p/STF-install/git/raw/master/protobuf-all-3.5.1.tar.gz

tar -zxvf protobuf-all-3.5.1.tar.gz
cd protobuf-3.5.1/
./configure --prefix=/usr/local/protobuf-3.5.1

make
sudo make install

sudo ln -s /usr/local/protobuf-3.5.1/bin/protoc  /usr/local/bin/protoc

protoc --version

#set environment

#export PATH=$PATH:/usr/local/protobuf-3.5.1/bin/
#export PKG_CONFIG_PATH=/usr/local/protobuf-3.5.1/lib/pkgconfig/

export PKG_CONFIG_PATH="/usr/local/protobuf-3.5.1/lib/pkgconfig/"
if ! grep PKG_CONFIG_PATH="/usr/local/protobuf-3.5.1/lib/pkgconfig/" /etc/profile 
then
echo PKG_CONFIG_PATH="/usr/local/protobuf-3.5.1/lib/pkgconfig/" | sudo tee -a /etc/profile
echo "export PKG_CONFIG_PATH" | sudo tee -a /etc/profile

echo "PATH=$PATH:/usr/local/protobuf-3.5.1/bin/" | sudo tee -a /etc/profile
echo "export PATH" | sudo tee -a /etc/profile
fi

source /etc/profile 

#安装yasm
sudo apt-get install -y yasm

#安装pkg-config
sudo apt-get install -y  pkg-config

#安装g++
sudo apt-get install -y g++

#安装node-gyp
sudo npm install -g node-gyp --unsafe-perm

#安装zmq
sudo npm install -g zmq --unsafe-perm

#安装jpeg-turbo
sudo npm install -g jpeg-turbo --unsafe-perm


#安装stf
sudo npm install -g stf --unsafe-perm

sudo ln -s /opt/node-v8.9.3-linux-x64/bin/stf  /usr/local/bin/stf

[PS] install_stf_stable.sh脚本地址

---

3.启动STF的方法：

3.1 使用命令启动：

service rethinkdb stop

rethinkdb --bind all --cache-size 8192 --http-port 8075

stf local --public-ip 192.168.1.13 --allow-remote

3.2 一键启动STF脚本【linux后台启动】：

#! /bin/bash


#[Note]使用本shell脚本的前提：关闭rethinkdb的开机自启动

#关闭rethinkdb的开机自启动 >> # sudo sysv-rc-conf

#this shell is used for start STF

echo "--------# this shell is used for start STF #-------------"


echo "--------# step1: service rethinkdb stop#-------------"

service rethinkdb stop

echo "--------# step2: rethinkdb允许所有ip访问，并设置port为8075 #-------------"

#rethinkdb --bind all --cache-size 8192 --http-port 8075

rethinkdb --bind all   --http-port 8075  &

echo "--------# step3: 允许远程访问STF #-------------"

stf local --public-ip 192.168.1.13 --allow-remote  &  

echo "--------# 启动成功 #-------------"

【PS】startup_STF.sh脚本地址

---

4.连接上真机的效果图：

MI2S

---