- 1.配置 /etc/sysconfig/keepalived 文件
- 2.添加keepalived日志保存位置的配置
- 3.修改 /lib/systemd/system/keepalived.service 文件
之前在MySQL主主+Keepalived架构安装部署也有描述Keepalived日志重定向的部分，其中提到RHEL7（实际是RHEL6.8以上）要配置rsyslog，回顾下之前的配置，主要就是改两个地方：
1.配置 /etc/sysconfig/keepalived 文件
vi /etc/sysconfig/keepalived 修改KEEPALIVED_OPTIONS的值：# Options for keepalived. See `keepalived --help' output and keepalived(8) and
# keepalived.conf(5) man pages for a list of all options. Here are the most
# common ones :
#
# --vrrp -P Only run with VRRP subsystem.
# --check -C Only run with Health-checker subsystem.
# --dont-release-vrrp -V Dont remove VRRP VIPs & VROUTEs on daemon stop.
# --dont-release-ipvs -I Dont remove IPVS topology on daemon stop.
# --dump-conf -d Dump the configuration data.
# --log-detail -D Detailed log messages.
# --log-facility -S 0-7 Set local syslog facility (default=LOG_DAEMON)
#
# KEEPALIVED_OPTIONS="-D"
KEEPALIVED_OPTIONS="-D -d -S 0"
2.添加keepalived日志保存位置的配置
因为第一步相当设置了log-facility=0，(-S 0)，那么添加local0的日志都重定向到/var/log/keepalived.log中：vi /etc/rsyslog.conf
..这里省略源文件内容.. 最后追加
# keepalived -S 0
local0.* /var/log/keepalived.log
但是实际验证发现，如果对于RHEL7，这样设置还不行，实际观察ps -ef|grep keep发现keepalived的进程还是KEEPALIVED_OPTIONS="-D"方式运行的，我们设置的KEEPALIVED_OPTIONS="-D -d -S 0"并未生效，大概怀疑到是RHEL7服务管理与RHEL6有较大区别，从这方面去找原因，以RHEL7为关键字进行相关问题搜索，最终发现RHEL7的确还需多做一步如下操作，才可以保证读取到我们上面的环境配置文件：
3.修改 /lib/systemd/system/keepalived.service 文件
将配置文件中的这两行：
EnvironmentFile=-/usr/local/keepalived/etc/sysconfig/keepalived
ExecStart=/usr/local/keepalived/sbin/keepalived $KEEPALIVED_OPTIONS
重新修改为：
EnvironmentFile=/etc/sysconfig/keepalived
ExecStart=/sbin/keepalived $KEEPALIVED_OPTIONS
可以看到这里/sbin/keepalived $KEEPALIVED_OPTIONS定义的变量是通过EnvironmentFile定义的配置文件去找的。
修改完成后，需要注意重新加载下service，否则后面启动keepalived服务会报错：
systemctl daemon-reload
最后重启rsyslog和keepalived服务，就可以实现RHEL7上Keepalived日志重定向到/var/log/keepalived.log了。