VLC-2.0.2编译过程

缘由：

研究H264的RTP封装时发现大家都使用VLC进行实验，那么我也不搞特殊化，先试试

环境：

ubuntu 10.04LTS

过程：

0）下载最新的vlc：http://www.videolan.org/

1）sudo ./configure

configure: error: Could not find lua. Lua is needed for some interfaces (rc, telnet, http) as well as many other custom scripts.

=》sudo apt-get install lua5.1 liblua5.1-dev

configure: error: Could not find libmad on your system: you may get it from http://www.underbit.com/products/mad/.

=》sudo apt-get install libmad0-dev

configure: error: No package 'libpostproc' found. 

=》sudo apt-get install libpostproc-dev

configure: error: Could not find liba52 on your system: you may get it from http://liba52.sf.net/.

=》sudo apt-get install liba52-dev

configure: error: Package requirements (xcb >= 1.6) were not met:Requested 'xcb >= 1.6' but version of XCB is 1.5

=》由于10.04上最新只有1.5.2，所以只能到http://xcb.freedesktop.org/dist/上下载最新的tarball，我下的是1.7的版本，即libxcb-1.7.tar.gz 和xcb-proto-1.7.tar.gz 装好就可以了（先装后者，否则前者装不上）

configure: error: libgcrypt version 1.1.94 or higher not found.

=》sudo apt-get install libgcrypt11-dev

2）sudo make

3）sudo make install

备注：

本人ubuntu上已安装最新的ffmpeg，所以部分包如libavcodec-dev libavformat-dev等已经安装，无须重复

部分参考：

http://www.ehow.com/how_8356303_compile-vlc-ubuntu.html

文章重点如下，可作为参考：

sudo apt-get install -y libdbus-1-dev lua5.1 liblua5.1-dev libmad0-dev libavcodec-dev libavformat-dev libswscale-dev libpostproc-dev liba52-dev libxcb1-dev libxcb-shm0-dev libxcb-xv0-dev libx11-xcb-dev libgl1-mesa-dev libqt4-dev libgcrypt11-dev