高通msm8953背光流程

问题记录：
        最近遇到一个屏背光的问题，主要就是pwm脚没找到的问题
异常logo:
[ 1833.972190] qyc, lcd-backlight mode: 0, bl_level: 353
[ 1833.973325] qyc, mdss_dsi_panel_bklt_pwm
[ 1833.978269] Stage 1, level== 353
[ 1833.982342] Stage 5
[ 1833.985471] mdss_dsi_panel_bklt_pwm: bklt_ctrl=0 pwm_period=100 pwm_gpio=0 pwm_lpg_chan=0
[ 1833.987308] Stage 5
[ 1833.995839] Stage 8
[ 1833.997615] Stage 10
[ 1833.999618] Stage 12 end
---------------------------------------------------------
debug时背光流程是正常跑的，在mdss_panel_parse_bl_settings中没有解析到pwm脚，从而用了默认值0

后面解决问题：
    屏用的是dsi0, 屏蔽了dsi1相关的宏和dtsi
    主要是 CONFIG_MSM_DBA  和 CONFIG_MSM_DBA_DSI1_BRIDGE
后面正常log：
[   35.722642] qyc, mdss_dsi_panel_bklt_pwm
[   35.727694] Stage 1, level== 305
[   35.731679] Stage 5
[   35.734788] mdss_dsi_panel_bklt_pwm: bklt_ctrl=0 pwm_period=100 pwm_gpio=1265 pwm_lpg_chan=0
[   35.736625] Stage 5
[   35.745461] Stage 8
[   35.747167] Stage 10
[   35.749203] Stage 12 end
----------------------------------------------------------
顺便记录下背光流程：
在mdss_dsi_panel_init:
        ctrl_pdata->panel_data.set_backlight = mdss_dsi_panel_bl_ctrl

mdss_dsi_panel_bl_ctrl：
    case BL_PWM：
            mdss_dsi_panel_bklt_pwm(ctrl_pdata, bl_level);

mdss_dsi_panel_bklt_pwm：
               ---> 打印了pwm_gpio                //ctrl->pwm_pmic_gpio
               ---> pwm_config（pwm设备， on time, period）设置

mdss_panel_parse_bl_settings：
        从dtsi解析
        tmp = of_get_named_gpio(np, "qcom,mdss-dsi-pwm-gpio", 0);


dtsi:
-------
&dsi_ili9881c_720p_video {
            qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm";
            qcom,mdss-dsi-bl-pmic-pwm-frequency = <80>;
            qcom,mdss-dsi-bl-pmic-bank-select = <0>;
            qcom,mdss-dsi-pwm-gpio = <&pm8953_mpps 4 0>;
            qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
}；