Hyperledger手动加入Peer节点

1.定义2个peer节点。

192.168.2.183	peer1、cli、couchdb
192.168.89.134	peer0、orderer、ca、cli

2. 从192.168.89.183上修改crypto-config.yml上定义两个Peer，并生成证书。拷贝peer1等其他相关证书到192.168.2.180上。

    # ---------------------------------------------------------------------------
    Template:
      Count: 2
      # Start: 5
      # Hostname: {{.Prefix}}{{.Index}} # default
    # ---------------------------------------------------------------------------
    # "Users"
    # ---------------------------------------------------------------------------
    # Count: The number of user accounts _in addition_ to Admin
    # ---------------------------------------------------------------------------
    Users:
      Count: 1

3.192.168.89.183 节点按照basic-network的方式正常开启。

 

4.修改192.168.2.180机器上的docker-compose.yml文件

Peer1、CouchDB副本、cli。GOSSIP节点 指定为Peer0那台机器上的端口。

#
# Copyright IBM Corp All Rights Reserved
#
# SPDX-License-Identifier: Apache-2.0
#
version: '2'

networks:
  basic:

services:
  peer1.org1.example.com:
    container_name: peer1.org1.example.com
    image: hyperledger/fabric-peer
    environment:
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - CORE_PEER_ID=peer1.org1.example.com
      - FABRIC_LOGGING_SPEC=info
      - CORE_CHAINCODE_LOGGING_LEVEL=info
      - CORE_PEER_LOCALMSPID=Org1MSP
      - CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/peer/
      - CORE_PEER_ADDRESS=peer1.org1.example.com:7051
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=192.168.89.183:7051
      # # the following setting starts chaincode containers on the same
      # # bridge network as the peers
      # # https://docs.docker.com/compose/networking/
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=${COMPOSE_PROJECT_NAME}_basic
      - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
      - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984
      # The CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME and CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD
      # provide the credentials for ledger to connect to CouchDB.  The username and password must
      # match the username and password set for the associated CouchDB.
      - CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=
      - CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric
    command: peer node start
    # command: peer node start --peer-chaincodedev=true
    ports:
      - 7051:7051
      - 7053:7053
    volumes:
        - /var/run/:/host/var/run/
        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/msp:/etc/hyperledger/msp/peer
        - ./crypto-config/peerOrganizations/org1.example.com/users:/etc/hyperledger/msp/users
        - ./config:/etc/hyperledger/configtx
        - /home/var/hyperledger/peer1:/var/hyperledger/production
    extra_hosts:
      - "orderer.example.com:192.168.89.183"
    networks:
      - basic

     depends_on:
      - couchdb

  couchdb:
    container_name: couchdb
    image: hyperledger/fabric-couchdb
    # Populate the COUCHDB_USER and COUCHDB_PASSWORD to set an admin user and password
    # for CouchDB.  This will prevent CouchDB from operating in an "Admin Party" mode.
    environment:
      - COUCHDB_USER=
      - COUCHDB_PASSWORD=
    ports:
      - 5984:5984
    networks:
      - basic
    volumes: 
      - /home/var/hyperledger/couchdb1:/opt/couchdb/data/

  cli:
    container_name: cli
    image: hyperledger/fabric-tools
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - FABRIC_LOGGING_SPEC=info
      - CORE_PEER_ID=cli
      - CORE_PEER_ADDRESS=peer1.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/[email protected]/msp
      - CORE_CHAINCODE_KEEPALIVE=10
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    #command: /bin/bash
    volumes:
        - /var/run/:/host/var/run/
        - ./../chaincode/:/opt/gopath/src/github.com/
        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
    networks:
        - basic

5.然后在第二台机器上启动2个节点。通过orderer获取第一个区块。并加入mychannel网络。

docker-compose -f docker-compose.yml up -d peer1.org1.example.com cli

# Create the channel

docker exec -e "CORE_PEER_LOCALMSPID=Org1MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer1.org1.example.com peer channel fetch config mychannel.block -o 192.168.89.183:7050 -c mychannel

# Join peer0.org1.example.com to the channel.
docker exec -e "CORE_PEER_LOCALMSPID=Org1MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer1.org1.example.com peer channel join -b mychannel.block

6.检查是否有错误。没。。错误，完美！~

docker logs peer1.org1.example.com