巧用PyUnit中unittest特性解决接口测试产生脏数据问题

巧用PyUnit中unittest特性解决接口测试产生脏数据问题


一、背景

测试数据创建后需要对其删除,不然可能产生脏数据,对开发和测试、生产环境造成一定影响。其接口框架是基于Python,API规范基于REST。


二、产生原因

(1)改进前:清除资源的操作放在每个正向测试用例里,没有在setUp和tearDown中删除。

(2)改进后:在setUp中初始化资源id=None,每次创建资源时会生产一个资源id,然后在tearDown中,判断资源的id是否为None,if不为None,then delete 资源并将资源id重新赋值为None。这样不管有没有执行成功,最终都会在tearDown中删除被创建成功的资源,初始化工作放在setUp中。


三、代码对比

(1)改进前:清除资源的操作放在每个正向测试用例里,没有在setUp和tearDown中删除。代码如下:

     def test_konwledges_check_by_list_ok(self):
        """
        lc知识点API:成功创建2个知识点后,批量查询知识点详细信息\
        """
        title = 'knowledges'
        flag = 0
        response = self.knowledge.add_knowledges(title, flag)
        message = "创建知识点接口返回失败"
        code = 200
        data = self.rest_o.parse_response(response, code, message)
        self.knowledges_id1 = data['identifier']

        response = self.knowledge.add_knowledges(title, flag)
        message = "创建知识点接口返回失败"
        code = 200
        data = self.rest_o.parse_response(response, code, message)
        self.knowledges_id2 = data['identifier']

        knowledge_id_str = [self.knowledges_id1, self.knowledges_id2]

        response = self.knowledge.check_konwledges_details_by_list(knowledge_id_str)
        #print 'response: ' + str(response)
        message = "批量查询知识点详细信息接口返回失败"
        code = 200
        data = self.rest_o.parse_response(response, code, message)
        print data
        assert data[self.knowledges_id1]
        assert data[self.knowledges_id2]

        self.knowledge.delete_konwledges(knowledge_id1)#放在测试用例中删除
        self.knowledge.delete_konwledges(knowledge_id2)#放在测试用例中删除


(2)改进后:

a.setUp和tearDown中改进:


    def setUp(self):
        print 'start run KnowledgeTest(知识点接口)......'
        self.knowledge = Knowledge()
        self.lessons = Lessons()
        self.instructional = Instructional(id)
        self.teaching_material = TeachingMaterial()
        self.rest_o = CoRestful.Restful()
        self.rand_o = CoRand()
        self.knowledges_id = None
        self.knowledges_id1 = None
        self.knowledges_id2 = None
        self.knowledge_relation_id = None

    def tearDown(self):
        #判断资源的id是否为None,if不为None,then delete 资源并将资源id重新赋值为None这样不管有没有执行成功,最终都会在tearDown中删除被创建成功的资源
        if self.knowledge_relation_id != None:
            self.knowledge.delete_relation(self.knowledge_relation_id)
        if self.knowledges_id2 != None:
            self.knowledge.delete_konwledges(self.knowledges_id2)
        if self.knowledges_id1 != None:
            self.knowledge.delete_konwledges(self.knowledges_id1)
        if self.knowledges_id != None:
            self.knowledge.delete_konwledges(self.knowledges_id)
        print '------------------------------------------------------'


b.测试用例中将其删除代码注释

def test_konwledges_check_by_list_ok(self):
        """
        lc知识点API:成功创建2个知识点后,批量查询知识点详细信息\
        """
        title = 'knowledges'
        flag = 0
        response = self.knowledge.add_knowledges(title, flag)
        message = "创建知识点接口返回失败"
        code = 200
        data = self.rest_o.parse_response(response, code, message)
        self.knowledges_id1 = data['identifier']

        response = self.knowledge.add_knowledges(title, flag)
        message = "创建知识点接口返回失败"
        code = 200
        data = self.rest_o.parse_response(response, code, message)
        self.knowledges_id2 = data['identifier']

        knowledge_id_str = [self.knowledges_id1, self.knowledges_id2]

        response = self.knowledge.check_konwledges_details_by_list(knowledge_id_str)
        #print 'response: ' + str(response)
        message = "批量查询知识点详细信息接口返回失败"
        code = 200
        data = self.rest_o.parse_response(response, code, message)
        print data
        assert data[self.knowledges_id1]
        assert data[self.knowledges_id2]

        #注释原在测试用例中删除的代码
        #self.knowledge.delete_konwledges(knowledge_id1)
        #self.knowledge.delete_konwledges(knowledge_id2)


四、总结

发现问题要多思考,并努力把其解决。



版权声明:本文为博主原创文章,未经博主允许不得转载。

转载于:https://www.cnblogs.com/haixianglan/p/4609229.html

你可能感兴趣的:(巧用PyUnit中unittest特性解决接口测试产生脏数据问题)