des 加解密

enum    {ENCRYPT_,DECRYPT};
//enum    bool{false,true}; // if bool is not supported,use this or just replace with char
                            // and use 1 for true,0 for false;
//


// Type—ENCRYPT:加密,DECRYPT:解密
// 输出缓冲区(Out)的长度 >= ((datalen+7)/8)*8,即比datalen大的且是8的倍数的最小正整数
// In 可以= Out,此时加/解密后将覆盖输入缓冲区(In)的内容
// 当keylen>8时系统自动使用3次DES加/解密,否则使用标准DES加/解密.超过16字节后只取前16字节


bool Des_Go(char *Out,char *In,long datalen,const char *Key,int keylen,bool Type = ENCRYPT);


//


//example:
//USES_CONVERSION;
//char key[]={0,2,0,0,9,3,5,1,9,8,0,0,9,1,7},buf[255];
//memset(buf, 0, sizeof(buf));
//strcpy(buf, T2A(_T("Admin") ));
//char *readfirst = buf ;
//char *readend = &buf[1] ;
//char *s;
//char y[3];    
//y[2] = 0;
//int i;
//int nLen = strlen( buf );
//for ( i = 0 ; i < nLen ; i++){
// y[0] = *readfirst ;
// y[1] = *readend ;
// readfirst += 2 ;
// readend += 2 ;
// buf[i] = (char)strtol((char*)y, &s, 16);
//}

//Des_Go(buf, buf, 10, key, sizeof(key), DECRYPT);



#include "stdafx.h"
#include "memory.h"
#include "WjcDes.h"


//


// initial permutation IP
const static char IP_Table[64] = {
58, 50, 42, 34, 26, 18, 10, 2, 60, 52, 44, 36, 28, 20, 12, 4,
62, 54, 46, 38, 30, 22, 14, 6, 64, 56, 48, 40, 32, 24, 16, 8,
57, 49, 41, 33, 25, 17,  9, 1, 59, 51, 43, 35, 27, 19, 11, 3,
    61, 53, 45, 37, 29, 21, 13, 5, 63, 55, 47, 39, 31, 23, 15, 7
};
// final permutation IP^-1 
const static char IPR_Table[64] = {
40, 8, 48, 16, 56, 24, 64, 32, 39, 7, 47, 15, 55, 23, 63, 31,
38, 6, 46, 14, 54, 22, 62, 30, 37, 5, 45, 13, 53, 21, 61, 29,
    36, 4, 44, 12, 52, 20, 60, 28, 35, 3, 43, 11, 51, 19, 59, 27,
34, 2, 42, 10, 50, 18, 58, 26, 33, 1, 41,  9, 49, 17, 57, 25
};
// expansion operation matrix
static const char E_Table[48] = {
32,  1,  2,  3,  4,  5,  4,  5,  6,  7,  8,  9,
8,  9, 10, 11, 12, 13, 12, 13, 14, 15, 16, 17,
16, 17, 18, 19, 20, 21, 20, 21, 22, 23, 24, 25,
24, 25, 26, 27, 28, 29, 28, 29, 30, 31, 32,  1
};
// 32-bit permutation function P used on the output of the S-boxes 
const static char P_Table[32] = {
16, 7, 20, 21, 29, 12, 28, 17, 1,  15, 23, 26, 5,  18, 31, 10,
2,  8, 24, 14, 32, 27, 3,  9,  19, 13, 30, 6,  22, 11, 4,  25
};
// permuted choice table (key) 
const static char PC1_Table[56] = {
57, 49, 41, 33, 25, 17,  9,  1, 58, 50, 42, 34, 26, 18,
10,  2, 59, 51, 43, 35, 27, 19, 11,  3, 60, 52, 44, 36,
63, 55, 47, 39, 31, 23, 15,  7, 62, 54, 46, 38, 30, 22,
14,  6, 61, 53, 45, 37, 29, 21, 13,  5, 28, 20, 12,  4
};
// permuted choice key (table) 
const static char PC2_Table[48] = {
14, 17, 11, 24,  1,  5,  3, 28, 15,  6, 21, 10,
23, 19, 12,  4, 26,  8, 16,  7, 27, 20, 13,  2,
41, 52, 31, 37, 47, 55, 30, 40, 51, 45, 33, 48,
44, 49, 39, 56, 34, 53, 46, 42, 50, 36, 29, 32
};
// number left rotations of pc1 
const static char LOOP_Table[16] = {
1,1,2,2,2,2,2,2,1,2,2,2,2,2,2,1
};
// The (in)famous S-boxes 
const static char S_Box[8][4][16] = {
// S1 
14, 4, 13, 1,  2, 15, 11,  8,  3, 10,  6, 12,  5,  9,  0,  7,
0, 15,  7,  4, 14,  2, 13,  1, 10,  6, 12, 11,  9,  5,  3,  8,
4,  1, 14,  8, 13,  6,  2, 11, 15, 12,  9,  7,  3, 10,  5,  0,
    15, 12,  8,  2,  4,  9,  1,  7,  5, 11,  3, 14, 10,  0,  6, 13,
// S2 
    15,  1,  8, 14,  6, 11,  3,  4,  9,  7,  2, 13, 12,  0,  5, 10,
3, 13,  4,  7, 15,  2,  8, 14, 12,  0,  1, 10,  6,  9, 11,  5,
0, 14,  7, 11, 10,  4, 13,  1,  5,  8, 12,  6,  9,  3,  2, 15,
    13,  8, 10,  1,  3, 15,  4,  2, 11,  6,  7, 12,  0,  5, 14,  9,
// S3 
    10,  0,  9, 14,  6,  3, 15,  5,  1, 13, 12,  7, 11,  4,  2,  8,
13,  7,  0,  9,  3,  4,  6, 10,  2,  8,  5, 14, 12, 11, 15,  1,
13,  6,  4,  9,  8, 15,  3,  0, 11,  1,  2, 12,  5, 10, 14,  7,
     1, 10, 13,  0,  6,  9,  8,  7,  4, 15, 14,  3, 11,  5,  2, 12,
// S4 
     7, 13, 14,  3,  0,  6,  9, 10,  1,  2,  8,  5, 11, 12,  4, 15,
13,  8, 11,  5,  6, 15,  0,  3,  4,  7,  2, 12,  1, 10, 14,  9,
10,  6,  9,  0, 12, 11,  7, 13, 15,  1,  3, 14,  5,  2,  8,  4,
     3, 15,  0,  6, 10,  1, 13,  8,  9,  4,  5, 11, 12,  7,  2, 14,
// S5 
     2, 12,  4,  1,  7, 10, 11,  6,  8,  5,  3, 15, 13,  0, 14,  9,
14, 11,  2, 12,  4,  7, 13,  1,  5,  0, 15, 10,  3,  9,  8,  6,
4,  2,  1, 11, 10, 13,  7,  8, 15,  9, 12,  5,  6,  3,  0, 14,
    11,  8, 12,  7,  1, 14,  2, 13,  6, 15,  0,  9, 10,  4,  5,  3,
// S6 
    12,  1, 10, 15,  9,  2,  6,  8,  0, 13,  3,  4, 14,  7,  5, 11,
10, 15,  4,  2,  7, 12,  9,  5,  6,  1, 13, 14,  0, 11,  3,  8,
9, 14, 15,  5,  2,  8, 12,  3,  7,  0,  4, 10,  1, 13, 11,  6,
     4,  3,  2, 12,  9,  5, 15, 10, 11, 14,  1,  7,  6,  0,  8, 13,
// S7 
     4, 11,  2, 14, 15,  0,  8, 13,  3, 12,  9,  7,  5, 10,  6,  1,
13,  0, 11,  7,  4,  9,  1, 10, 14,  3,  5, 12,  2, 15,  8,  6,
1,  4, 11, 13, 12,  3,  7, 14, 10, 15,  6,  8,  0,  5,  9,  2,
     6, 11, 13,  8,  1,  4, 10,  7,  9,  5,  0, 15, 14,  2,  3, 12,
// S8 
    13,  2,  8,  4,  6, 15, 11,  1, 10,  9,  3, 14,  5,  0, 12,  7,
1, 15, 13,  8, 10,  3,  7,  4, 12,  5,  6, 11,  0, 14,  9,  2,
7, 11,  4,  1,  9, 12, 14,  2,  0,  6, 10, 13, 15,  3,  5,  8,
     2,  1, 14,  7,  4, 10,  8, 13, 15, 12,  9,  0,  3,  5,  6, 11
};


//


typedef bool    (*PSubKey)[16][48];


//


static void DES(char Out[8], char In[8], const PSubKey pSubKey, bool Type);//标准DES加/解密
static void SetKey(const char* Key, int len);// 设置密钥
static void SetSubKey(PSubKey pSubKey, const char Key[8]);// 设置子密钥
static void F_func(bool In[32], const bool Ki[48]);// f 函数
static void S_func(bool Out[32], const bool In[48]);// S 盒代替
static void Transform(bool *Out, bool *In, const char *Table, int len);// 变换
static void Xor(bool *InA, const bool *InB, int len);// 异或
static void RotateL(bool *In, int len, int loop);// 循环左移
static void ByteToBit(bool *Out, const char *In, int bits);// 字节组转换成位组
static void BitToByte(char *Out, const bool *In, int bits);// 位组转换成字节组


//


static bool SubKey[2][16][48];// 16圈子密钥
static bool Is3DES;// 3次DES标志
static char Tmp[256], deskey[16];


//


//
// Code starts from Line 130
//
bool Des_Go(char *Out, char *In, long datalen, const char *Key, int keylen, bool Type)
{
    if( !( Out && In && Key && (datalen=(datalen+7)&0xfffffff8) ) ) 
return false;
SetKey(Key, keylen);
if( !Is3DES ) {   // 1次DES
for(long i=0,j=datalen>>3; iDES(Out, In, &SubKey[0], Type);
} else{   // 3次DES 加密:加(key0)-解(key1)-加(key0) 解密::解(key0)-加(key1)-解(key0)
for(long i=0,j=datalen>>3; iDES(Out, In,  &SubKey[0], Type);
DES(Out, Out, &SubKey[1], !Type);
DES(Out, Out, &SubKey[0], Type);
}
}
return true;
}
void SetKey(const char* Key, int len)
{
memset(deskey, 0, 16);
memcpy(deskey, Key, len>16?16:len);
SetSubKey(&SubKey[0], &deskey[0]);
Is3DES = len>8 ? (SetSubKey(&SubKey[1], &deskey[8]), true) : false;
}
void DES(char Out[8], char In[8], const PSubKey pSubKey, bool Type)
{
    static bool M[64], tmp[32], *Li=&M[0], *Ri=&M[32];
    ByteToBit(M, In, 64);
    Transform(M, M, IP_Table, 64);
    if( Type == ENCRYPT_ ){
        for(int i=0; i<16; ++i) {
            memcpy(tmp, Ri, 32);
            F_func(Ri, (*pSubKey)[i]);
            Xor(Ri, Li, 32);
            memcpy(Li, tmp, 32);
        }
    }else{
        for(int i=15; i>=0; --i) {
            memcpy(tmp, Li, 32);
            F_func(Li, (*pSubKey)[i]);
            Xor(Li, Ri, 32);
            memcpy(Ri, tmp, 32);
        }
}
    Transform(M, M, IPR_Table, 64);
    BitToByte(Out, M, 64);
}
void SetSubKey(PSubKey pSubKey, const char Key[8])
{
    static bool K[64], *KL=&K[0], *KR=&K[28];
    ByteToBit(K, Key, 64);
    Transform(K, K, PC1_Table, 56);
    for(int i=0; i<16; ++i) {
        RotateL(KL, 28, LOOP_Table[i]);
        RotateL(KR, 28, LOOP_Table[i]);
        Transform((*pSubKey)[i], K, PC2_Table, 48);
    }
}
void F_func(bool In[32], const bool Ki[48])
{
    static bool MR[48];
    Transform(MR, In, E_Table, 48);
    Xor(MR, Ki, 48);
    S_func(In, MR);
    Transform(In, In, P_Table, 32);
}
void S_func(bool Out[32], const bool In[48])
{
    for(char i=0,j,k; i<8; ++i,In+=6,Out+=4) {
        j = (In[0]<<1) + In[5];
        k = (In[1]<<3) + (In[2]<<2) + (In[3]<<1) + In[4];
ByteToBit(Out, &S_Box[i][j][k], 4);
    }
}
void Transform(bool *Out, bool *In, const char *Table, int len)
{
    for(int i=0; i         Tmp[i] = In[ Table[i]-1 ];
    memcpy(Out, Tmp, len);
}
void Xor(bool *InA, const bool *InB, int len)
{
    for(int i=0; i         InA[i] ^= InB[i];
}
void RotateL(bool *In, int len, int loop)
{
    memcpy(Tmp, In, loop);
    memcpy(In, In+loop, len-loop);
    memcpy(In+len-loop, Tmp, loop);
}
void ByteToBit(bool *Out, const char *In, int bits)
{
    for(int i=0; i         Out[i] = (In[i>>3]>>(i&7)) & 1;
}
void BitToByte(char *Out, const bool *In, int bits)
{
    memset(Out, 0, bits>>3);
    for(int i=0; i         Out[i>>3] |= In[i]<<(i&7);
}






你可能感兴趣的:(笔记(小知识))