PyTorch: TORCH.NN

Pytorch提供了torch.nn、torch.optim、Dataset和DataLoader这些设计优雅的模块和类以帮助使用者创建和训练神经网络。 为了最大化利用这些模块和类的功能，并使用它们做出适用于你所研究问题的模型，你需要真正理解他们是如何工作的。 为了做到这一点，我们首先基于MNIST数据集训练一个没有任何特征的简单神经网络。 最开始我们只会用到PyTorch中最基本的tensor功能，然后我们将会逐渐的从torch.nn，torch.optim，Dataset，DataLoader中选择一个特征加入到模型中，来展示新加入的特征会对模型产生什么样的效果，以及它是如何使模型变得更简洁或更灵活。

在这个教程中，我们假设你已经安装好了PyTorch，并且已经熟悉了基本的tensor运算。(如果你熟悉Numpy的数组运算，你将会发现这里用到的PyTorch tensor运算和numpy几乎是一样的)

目录

MNIST data setup

Neural net from scratch (no torch.nn)

Using torch.nn.functional

Refactor using nn.Module

Refactor using nn.Linear

Refactor using optim

Refactor using Dataset

Refactor using DataLoader

Add validation

Create fit() and get_data()

Switch to CNN

nn.Sequential

Wrapping DataLoader

Using your GPU

Closing thoughts

---

MNIST data setup

We will use the classic MNIST dataset, which consists of black-and-white images of hand-drawn digits (between 0 and 9).

We will use pathlib for dealing with paths (part of the Python 3 standard library), and will download the dataset using requests. We will only import modules when we use them, so you can see exactly what’s being used at each point.

from pathlib import Path
import requests

DATA_PATH = Path("data")
PATH = DATA_PATH / "mnist"

PATH.mkdir(parents=True, exist_ok=True)

URL = "http://deeplearning.net/data/mnist/"
FILENAME = "mnist.pkl.gz"

if not (PATH / FILENAME).exists():
        content = requests.get(URL + FILENAME).content
        (PATH / FILENAME).open("wb").write(content)

This dataset is in numpy array format, and has been stored using pickle, a python-specific format for serializing data.

import pickle
import gzip

with gzip.open((PATH / FILENAME).as_posix(), "rb") as f:
        ((x_train, y_train), (x_valid, y_valid), _) = pickle.load(f, encoding="latin-1")

Each image is 28 x 28, and is being stored as a flattened row of length 784 (=28x28). Let’s take a look at one; we need to reshape it to 2d first.

from matplotlib import pyplot
import numpy as np

pyplot.imshow(x_train[0].reshape((28, 28)), cmap="gray")
print(x_train.shape)

Out:

(50000, 784)

PyTorch uses torch.tensor, rather than numpy arrays, so we need to convert our data.

import torch

x_train, y_train, x_valid, y_valid = map(
    torch.tensor, (x_train, y_train, x_valid, y_valid)
)
n, c = x_train.shape
x_train, x_train.shape, y_train.min(), y_train.max()
print(x_train, y_train)
print(x_train.shape)
print(y_train.min(), y_train.max())

Out:

tensor([[0., 0., 0.,  ..., 0., 0., 0.],
        [0., 0., 0.,  ..., 0., 0., 0.],
        [0., 0., 0.,  ..., 0., 0., 0.],
        ...,
        [0., 0., 0.,  ..., 0., 0., 0.],
        [0., 0., 0.,  ..., 0., 0., 0.],
        [0., 0., 0.,  ..., 0., 0., 0.]]) tensor([5, 0, 4,  ..., 8, 4, 8])
torch.Size([50000, 784])
tensor(0) tensor(9)

Neural net from scratch (no torch.nn)

Let’s first create a model using nothing but PyTorch tensor operations. We’re assuming you’re already familiar with the basics of neural networks. (If you’re not, you can learn them at course.fast.ai).

PyTorch provides methods to create random or zero-filled tensors, which we will use to create our weights and bias for a simple linear model. These are just regular tensors, with one very special addition: we tell PyTorch that they require a gradient. This causes PyTorch to record all of the operations done on the tensor, so that it can calculate the gradient during back-propagation automatically!

For the weights, we set requires_grad after the initialization, since we don’t want that step included in the gradient. (Note that a trailling _ in PyTorch signifies that the operation is performed in-place.)

NOTE

We are initializing the weights here with Xavier initialisation (by multiplying with 1/sqrt(n)).

import math

weights = torch.randn(784, 10) / math.sqrt(784)
weights.requires_grad_()
bias = torch.zeros(10, requires_grad=True)

Thanks to PyTorch’s ability to calculate gradients automatically, we can use any standard Python function (or callable object) as a model! So let’s just write a plain matrix multiplication and broadcasted addition to create a simple linear model. We also need an activation function, so we’ll write log_softmax and use it. Remember: although PyTorch provides lots of pre-written loss functions, activation functions, and so forth, you can easily write your own using plain python. PyTorch will even create fast GPU or vectorized CPU code for your function automatically.

def log_softmax(x):
    return x - x.exp().sum(-1).log().unsqueeze(-1)

def model(xb):
    return log_softmax(xb @ weights + bias)

In the above, the @ stands for the dot product operation. We will call our function on one batch of data (in this case, 64 images). This is one forward pass. Note that our predictions won’t be any better than random at this stage, since we start with random weights.

bs = 64  # batch size

xb = x_train[0:bs]  # a mini-batch from x
preds = model(xb)  # predictions
preds[0], preds.shape
print(preds[0], preds.shape)

Out:

tensor([-2.5843, -2.5148, -2.3129, -2.0404, -2.1355, -2.3696, -2.4162, -2.1732,
        -2.2085, -2.4070], grad_fn=) torch.Size([64, 10])

As you see, the preds tensor contains not only the tensor values, but also a gradient function. We’ll use this later to do backprop.

Let’s implement negative log-likelihood to use as the loss function (again, we can just use standard Python):

def nll(input, target):
    return -input[range(target.shape[0]), target].mean()

loss_func = nll

Let’s check our loss with our random model, so we can see if we improve after a backprop pass later.

yb = y_train[0:bs]
print(loss_func(preds, yb))

Out:

tensor(2.2706, grad_fn=)

Let’s also implement a function to calculate the accuracy of our model. For each prediction, if the index with the largest value matches the target value, then the prediction was correct.

def accuracy(out, yb):
    preds = torch.argmax(out, dim=1)
    return (preds == yb).float().mean()

Let’s check the accuracy of our random model, so we can see if our accuracy improves as our loss improves.

print(accuracy(preds, yb))

Out:

tensor(0.1875)

We can now run a training loop. For each iteration, we will:

• select a mini-batch of data (of size bs)
• use the model to make predictions
• calculate the loss
• loss.backward() updates the gradients of the model, in this case, weights and bias.

We now use these gradients to update the weights and bias. We do this within the torch.no_grad() context manager, because we do not want these actions to be recorded for our next calculation of the gradient. You can read more about how PyTorch’s Autograd records operations here.

We then set the gradients to zero, so that we are ready for the next loop. Otherwise, our gradients would record a running tally of all the operations that had happened (i.e. loss.backward() adds the gradients to whatever is already stored, rather than replacing them).

TIP

You can use the standard python debugger to step through PyTorch code, allowing you to check the various variable values at each step. Uncomment set_trace() below to try it out.

from IPython.core.debugger import set_trace

lr = 0.5  # learning rate
epochs = 2  # how many epochs to train for

for epoch in range(epochs):
    for i in range((n - 1) // bs + 1):
        #         set_trace()
        start_i = i * bs
        end_i = start_i + bs
        xb = x_train[start_i:end_i]
        yb = y_train[start_i:end_i]
        pred = model(xb)
        loss = loss_func(pred, yb)

        loss.backward()
        with torch.no_grad():
            weights -= weights.grad * lr
            bias -= bias.grad * lr
            weights.grad.zero_()
            bias.grad.zero_()

That’s it: we’ve created and trained a minimal neural network (in this case, a logistic regression, since we have no hidden layers) entirely from scratch!

Let’s check the loss and accuracy and compare those to what we got earlier. We expect that the loss will have decreased and accuracy to have increased, and they have.

print(loss_func(model(xb), yb), accuracy(model(xb), yb))

Out:

tensor(0.0835, grad_fn=) tensor(1.)

Using torch.nn.functional

We will now refactor our code, so that it does the same thing as before, only we’ll start taking advantage of PyTorch’s nn classes to make it more concise and flexible. At each step from here, we should be making our code one or more of: shorter, more understandable, and/or more flexible.

The first and easiest step is to make our code shorter by replacing our hand-written activation and loss functions with those from torch.nn.functional (which is generally imported into the namespace F by convention). This module contains all the functions in the torch.nn library (whereas other parts of the library contain classes). As well as a wide range of loss and activation functions, you’ll also find here some convenient functions for creating neural nets, such as pooling functions. (There are also functions for doing convolutions, linear layers, etc, but as we’ll see, these are usually better handled using other parts of the library.)

If you’re using negative log likelihood loss and log softmax activation, then Pytorch provides a single function F.cross_entropy that combines the two. So we can even remove the activation function from our model.

import torch.nn.functional as F

loss_func = F.cross_entropy

def model(xb):
    return xb @ weights + bias

Note that we no longer call log_softmax in the model function. Let’s confirm that our loss and accuracy are the same as before:

print(loss_func(model(xb), yb), accuracy(model(xb), yb))

Out:

tensor(0.0835, grad_fn=) tensor(1.)

Refactor using nn.Module

Next up, we’ll use nn.Module and nn.Parameter, for a clearer and more concise training loop. We subclass nn.Module (which itself is a class and able to keep track of state). In this case, we want to create a class that holds our weights, bias, and method for the forward step. nn.Module has a number of attributes and methods (such as .parameters() and .zero_grad()) which we will be using.

NOTE

nn.Module (uppercase M) is a PyTorch specific concept, and is a class we’ll be using a lot. nn.Module is not to be confused with the Python concept of a (lowercase m) module, which is a file of Python code that can be imported.

from torch import nn

class Mnist_Logistic(nn.Module):
    def __init__(self):
        super().__init__()
        self.weights = nn.Parameter(torch.randn(784, 10) / math.sqrt(784))
        self.bias = nn.Parameter(torch.zeros(10))

    def forward(self, xb):
        return xb @ self.weights + self.bias

Since we’re now using an object instead of just using a function, we first have to instantiate our model:

model = Mnist_Logistic()

Now we can calculate the loss in the same way as before. Note that nn.Module objects are used as if they are functions (i.e they arecallable), but behind the scenes Pytorch will call our forward method automatically.

print(loss_func(model(xb), yb))

Out:

tensor(2.3301, grad_fn=)

Previously for our training loop we had to update the values for each parameter by name, and manually zero out the grads for each parameter separately, like this:

with torch.no_grad():
    weights -= weights.grad * lr
    bias -= bias.grad * lr
    weights.grad.zero_()
    bias.grad.zero_()

Now we can take advantage of model.parameters() and model.zero_grad() (which are both defined by PyTorch for nn.Module) to make those steps more concise and less prone to the error of forgetting some of our parameters, particularly if we had a more complicated model:

with torch.no_grad():
    for p in model.parameters(): p -= p.grad * lr
    model.zero_grad()

We’ll wrap our little training loop in a fit function so we can run it again later.

def fit():
    for epoch in range(epochs):
        for i in range((n - 1) // bs + 1):
            start_i = i * bs
            end_i = start_i + bs
            xb = x_train[start_i:end_i]
            yb = y_train[start_i:end_i]
            pred = model(xb)
            loss = loss_func(pred, yb)

            loss.backward()
            with torch.no_grad():
                for p in model.parameters():
                    p -= p.grad * lr
                model.zero_grad()

fit()

Let’s double-check that our loss has gone down:

print(loss_func(model(xb), yb))

Out:

tensor(0.0827, grad_fn=)

Refactor using nn.Linear

We continue to refactor our code. Instead of manually defining and initializing self.weights and self.bias, and calculating xb @ self.weights + self.bias, we will instead use the Pytorch class nn.Linear for a linear layer, which does all that for us. Pytorch has many types of predefined layers that can greatly simplify our code, and often makes it faster too.

class Mnist_Logistic(nn.Module):
    def __init__(self):
        super().__init__()
        self.lin = nn.Linear(784, 10)

    def forward(self, xb):
        return self.lin(xb)

We instantiate our model and calculate the loss in the same way as before:

model = Mnist_Logistic()
print(loss_func(model(xb), yb))

Out:

tensor(2.2959, grad_fn=)

We are still able to use our same fit method as before.

fit()

print(loss_func(model(xb), yb))

Out:

tensor(0.0812, grad_fn=)

Refactor using optim

Pytorch also has a package with various optimization algorithms, torch.optim. We can use the step method from our optimizer to take a forward step, instead of manually updating each parameter.

This will let us replace our previous manually coded optimization step:

with torch.no_grad():
    for p in model.parameters(): p -= p.grad * lr
    model.zero_grad()

and instead use just:

with torch.no_grad():
    for p in model.parameters(): p -= p.grad * lr
    model.zero_grad()

(optim.zero_grad() resets the gradient to 0 and we need to call it before computing the gradient for the next minibatch.)

from torch import optim

We’ll define a little function to create our model and optimizer so we can reuse it in the future.

def get_model():
    model = Mnist_Logistic()
    return model, optim.SGD(model.parameters(), lr=lr)

model, opt = get_model()
print(loss_func(model(xb), yb))

for epoch in range(epochs):
    for i in range((n - 1) // bs + 1):
        start_i = i * bs
        end_i = start_i + bs
        xb = x_train[start_i:end_i]
        yb = y_train[start_i:end_i]
        pred = model(xb)
        loss = loss_func(pred, yb)

        loss.backward()
        opt.step()
        opt.zero_grad()

print(loss_func(model(xb), yb))

Out:

tensor(2.3315, grad_fn=)
tensor(0.0810, grad_fn=)

Refactor using Dataset

PyTorch has an abstract Dataset class. A Dataset can be anything that has a __len__ function (called by Python’s standard lenfunction) and a __getitem__ function as a way of indexing into it. This tutorial walks through a nice example of creating a custom FacialLandmarkDataset class as a subclass of Dataset.

PyTorch’s TensorDataset is a Dataset wrapping tensors. By defining a length and way of indexing, this also gives us a way to iterate, index, and slice along the first dimension of a tensor. This will make it easier to access both the independent and dependent variables in the same line as we train.

from torch.utils.data import TensorDataset

Both x_train and y_train can be combined in a single TensorDataset, which will be easier to iterate over and slice.

train_ds = TensorDataset(x_train, y_train)

Previously, we had to iterate through minibatches of x and y values separately:

xb = x_train[start_i:end_i]
yb = y_train[start_i:end_i]

Now, we can do these two steps together:

xb,yb = train_ds[i*bs : i*bs+bs]
model, opt = get_model()

for epoch in range(epochs):
    for i in range((n - 1) // bs + 1):
        xb, yb = train_ds[i * bs: i * bs + bs]
        pred = model(xb)
        loss = loss_func(pred, yb)

        loss.backward()
        opt.step()
        opt.zero_grad()

print(loss_func(model(xb), yb))

Out:

tensor(0.0818, grad_fn=)

Refactor using DataLoader

Pytorch’s DataLoader is responsible for managing batches. You can create a DataLoader from any Dataset. DataLoader makes it easier to iterate over batches. Rather than having to use train_ds[i*bs : i*bs+bs], the DataLoader gives us each minibatch automatically.

from torch.utils.data import DataLoader

train_ds = TensorDataset(x_train, y_train)
train_dl = DataLoader(train_ds, batch_size=bs)

Previously, our loop iterated over batches (xb, yb) like this:

for i in range((n-1)//bs + 1):
    xb,yb = train_ds[i*bs : i*bs+bs]
    pred = model(xb)

Now, our loop is much cleaner, as (xb, yb) are loaded automatically from the data loader:

for xb,yb in train_dl:
    pred = model(xb)
model, opt = get_model()

for epoch in range(epochs):
    for xb, yb in train_dl:
        pred = model(xb)
        loss = loss_func(pred, yb)

        loss.backward()
        opt.step()
        opt.zero_grad()

print(loss_func(model(xb), yb))

Out:

tensor(0.0817, grad_fn=)

Thanks to Pytorch’s nn.Module, nn.Parameter, Dataset, and DataLoader, our training loop is now dramatically smaller and easier to understand. Let’s now try to add the basic features necessary to create effecive models in practice.

Add validation

In section 1, we were just trying to get a reasonable training loop set up for use on our training data. In reality, you always should also have a validation set, in order to identify if you are overfitting.

Shuffling the training data is important to prevent correlation between batches and overfitting. On the other hand, the validation loss will be identical whether we shuffle the validation set or not. Since shuffling takes extra time, it makes no sense to shuffle the validation data.

We’ll use a batch size for the validation set that is twice as large as that for the training set. This is because the validation set does not need backpropagation and thus takes less memory (it doesn’t need to store the gradients). We take advantage of this to use a larger batch size and compute the loss more quickly.

train_ds = TensorDataset(x_train, y_train)
train_dl = DataLoader(train_ds, batch_size=bs, shuffle=True)

valid_ds = TensorDataset(x_valid, y_valid)
valid_dl = DataLoader(valid_ds, batch_size=bs * 2)

We will calculate and print the validation loss at the end of each epoch.

(Note that we always call model.train() before training, and model.eval() before inference, because these are used by layers such as nn.BatchNorm2d and nn.Dropout to ensure appropriate behaviour for these different phases.)

model, opt = get_model()

for epoch in range(epochs):
    model.train()
    for xb, yb in train_dl:
        pred = model(xb)
        loss = loss_func(pred, yb)

        loss.backward()
        opt.step()
        opt.zero_grad()

    model.eval()
    with torch.no_grad():
        valid_loss = sum(loss_func(model(xb), yb) for xb, yb in valid_dl)

    print(epoch, valid_loss / len(valid_dl))

Out:

0 tensor(0.2938)
1 tensor(0.2820)

Create fit() and get_data()

We’ll now do a little refactoring of our own. Since we go through a similar process twice of calculating the loss for both the training set and the validation set, let’s make that into its own function, loss_batch, which computes the loss for one batch.

We pass an optimizer in for the training set, and use it to perform backprop. For the validation set, we don’t pass an optimizer, so the method doesn’t perform backprop.

def loss_batch(model, loss_func, xb, yb, opt=None):
    loss = loss_func(model(xb), yb)

    if opt is not None:
        loss.backward()
        opt.step()
        opt.zero_grad()

    return loss.item(), len(xb)

fit runs the necessary operations to train our model and compute the training and validation losses for each epoch.

import numpy as np

def fit(epochs, model, loss_func, opt, train_dl, valid_dl):
    for epoch in range(epochs):
        model.train()
        for xb, yb in train_dl:
            loss_batch(model, loss_func, xb, yb, opt)

        model.eval()
        with torch.no_grad():
            losses, nums = zip(
                *[loss_batch(model, loss_func, xb, yb) for xb, yb in valid_dl]
            )
        val_loss = np.sum(np.multiply(losses, nums)) / np.sum(nums)

        print(epoch, val_loss)

get_data returns dataloaders for the training and validation sets.

def get_data(train_ds, valid_ds, bs):
    return (
        DataLoader(train_ds, batch_size=bs, shuffle=True),
        DataLoader(valid_ds, batch_size=bs * 2),
    )

Now, our whole process of obtaining the data loaders and fitting the model can be run in 3 lines of code:

train_dl, valid_dl = get_data(train_ds, valid_ds, bs)
model, opt = get_model()
fit(epochs, model, loss_func, opt, train_dl, valid_dl)

Out:

0 0.3609494951248169
1 0.3060923014163971

You can use these basic 3 lines of code to train a wide variety of models. Let’s see if we can use them to train a convolutional neural network (CNN)!

Switch to CNN

We are now going to build our neural network with three convolutional layers. Because none of the functions in the previous section assume anything about the model form, we’ll be able to use them to train a CNN without any modification.

We will use Pytorch’s predefined Conv2d class as our convolutional layer. We define a CNN with 3 convolutional layers. Each convolution is followed by a ReLU. At the end, we perform an average pooling. (Note that view is PyTorch’s version of numpy’sreshape)

class Mnist_CNN(nn.Module):
    def __init__(self):
        super().__init__()
        self.conv1 = nn.Conv2d(1, 16, kernel_size=3, stride=2, padding=1)
        self.conv2 = nn.Conv2d(16, 16, kernel_size=3, stride=2, padding=1)
        self.conv3 = nn.Conv2d(16, 10, kernel_size=3, stride=2, padding=1)

    def forward(self, xb):
        xb = xb.view(-1, 1, 28, 28)
        xb = F.relu(self.conv1(xb))
        xb = F.relu(self.conv2(xb))
        xb = F.relu(self.conv3(xb))
        xb = F.avg_pool2d(xb, 4)
        return xb.view(-1, xb.size(1))

lr = 0.1

Momentum is a variation on stochastic gradient descent that takes previous updates into account as well and generally leads to faster training.

model = Mnist_CNN()
opt = optim.SGD(model.parameters(), lr=lr, momentum=0.9)

fit(epochs, model, loss_func, opt, train_dl, valid_dl)

Out:

0 0.4062554702758789
1 0.2820002856731415

nn.Sequential

torch.nn has another handy class we can use to simply our code: Sequential . A Sequential object runs each of the modules contained within it, in a sequential manner. This is a simpler way of writing our neural network.

To take advantage of this, we need to be able to easily define a custom layer from a given function. For instance, PyTorch doesn’t have a view layer, and we need to create one for our network. Lambda will create a layer that we can then use when defining a network withSequential.

class Lambda(nn.Module):
    def __init__(self, func):
        super().__init__()
        self.func = func

    def forward(self, x):
        return self.func(x)


def preprocess(x):
    return x.view(-1, 1, 28, 28)

The model created with Sequential is simply:

model = nn.Sequential(
    Lambda(preprocess),
    nn.Conv2d(1, 16, kernel_size=3, stride=2, padding=1),
    nn.ReLU(),
    nn.Conv2d(16, 16, kernel_size=3, stride=2, padding=1),
    nn.ReLU(),
    nn.Conv2d(16, 10, kernel_size=3, stride=2, padding=1),
    nn.ReLU(),
    nn.AvgPool2d(4),
    Lambda(lambda x: x.view(x.size(0), -1)),
)

opt = optim.SGD(model.parameters(), lr=lr, momentum=0.9)

fit(epochs, model, loss_func, opt, train_dl, valid_dl)

Out:

0 0.32428581733703615
1 0.24909076919555664

Wrapping DataLoader

Our CNN is fairly concise, but it only works with MNIST, because:

• It assumes the input is a 28*28 long vector
• It assumes that the final CNN grid size is 4*4 (since that’s the average

pooling kernel size we used)

Let’s get rid of these two assumptions, so our model works with any 2d single channel image. First, we can remove the initial Lambda layer but moving the data preprocessing into a generator:

def preprocess(x, y):
    return x.view(-1, 1, 28, 28), y


class WrappedDataLoader:
    def __init__(self, dl, func):
        self.dl = dl
        self.func = func

    def __len__(self):
        return len(self.dl)

    def __iter__(self):
        batches = iter(self.dl)
        for b in batches:
            yield (self.func(*b))

train_dl, valid_dl = get_data(train_ds, valid_ds, bs)
train_dl = WrappedDataLoader(train_dl, preprocess)
valid_dl = WrappedDataLoader(valid_dl, preprocess)

Next, we can replace nn.AvgPool2d with nn.AdaptiveAvgPool2d, which allows us to define the size of the output tensor we want, rather than the input tensor we have. As a result, our model will work with any size input.

model = nn.Sequential(
    nn.Conv2d(1, 16, kernel_size=3, stride=2, padding=1),
    nn.ReLU(),
    nn.Conv2d(16, 16, kernel_size=3, stride=2, padding=1),
    nn.ReLU(),
    nn.Conv2d(16, 10, kernel_size=3, stride=2, padding=1),
    nn.ReLU(),
    nn.AdaptiveAvgPool2d(1),
    Lambda(lambda x: x.view(x.size(0), -1)),
)

opt = optim.SGD(model.parameters(), lr=lr, momentum=0.9)
Let’s try it out:

fit(epochs, model, loss_func, opt, train_dl, valid_dl)

Out:

0 0.328026326751709
1 0.23665185194015503

Using your GPU

If you’re lucky enough to have access to a CUDA-capable GPU (you can rent one for about $0.50/hour from most cloud providers) you can use it to speed up your code. First check that your GPU is working in Pytorch:

print(torch.cuda.is_available())

Out:

True

And then create a device object for it:

dev = torch.device(
    "cuda") if torch.cuda.is_available() else torch.device("cpu")

Let’s update preprocess to move batches to the GPU:

def preprocess(x, y):
    return x.view(-1, 1, 28, 28).to(dev), y.to(dev)


train_dl, valid_dl = get_data(train_ds, valid_ds, bs)
train_dl = WrappedDataLoader(train_dl, preprocess)
valid_dl = WrappedDataLoader(valid_dl, preprocess)

Finally, we can move our model to the GPU.

model.to(dev)
opt = optim.SGD(model.parameters(), lr=lr, momentum=0.9)

You should find it runs faster now:

fit(epochs, model, loss_func, opt, train_dl, valid_dl)

Out:

0 0.2577493064880371
1 0.17114607820510863

Closing thoughts

We now have a general data pipeline and training loop which you can use for training many types of models using Pytorch. To see how simple training a model can now be, take a look at the mnist_sample sample notebook.

Of course, there are many things you’ll want to add, such as data augmentation, hyperparameter tuning, monitoring training, transfer learning, and so forth. These features are available in the fastai library, which has been developed using the same design approach shown in this tutorial, providing a natural next step for practitioners looking to take their models further.

We promised at the start of this tutorial we’d explain through example each of torch.nn, torch.optim, Dataset, and DataLoader. So let’s summarize what we’ve seen:

• torch.nn
  • Module: creates a callable which behaves like a function, but can also contain state(such as neural net layer weights). It knows what Parameter (s) it contains and can zero all their gradients, loop through them for weight updates, etc.
  • Parameter: a wrapper for a tensor that tells a Module that it has weights that need updating during backprop. Only tensors with the requires_gradattribute set are updated
  • functional: a module(usually imported into the F namespace by convention) which contains activation functions, loss functions, etc, as well as non-stateful versions of layers such as convolutional and linear layers.
• torch.optim: Contains optimizers such as SGD, which update the weights of Parameter during the backward step
• Dataset: An abstract interface of objects with a __len__ and a __getitem__, including classes provided with Pytorch such as TensorDataset
• DataLoader: Takes any Dataset and creates an iterator which returns batches of data.

Total running time of the script: ( 1 minutes 33.199 seconds)