Generate the Jobs script from msdb Database

前两周，由于数据库简繁体的转换，大量的数据库需要转到新的服务器。 在转其中的一台的时候，原先导出来的JOBS脚本不翼而飞（原因至今未明），而恰巧这一台服务器有90多个JOB（看下图恢复后的，注意滚动条的长短），这样一来，可急坏了人了。 这么多的JOB要一个一个建立，时间去了不说，有些JOB根本不知道执行的是哪些命令，执行顺序如何，这么多的系统相互交纵复杂，如果不能正确的处理好，星期一可就乱了套了。到时谁都不会有好果子吃。 由于JOBS都是存在于msdb数据库，还好，我们平时是有备份这个数据库的，这样一来，我们应该想办法从这个数据库里取回一些有用的信息。 首先，我应该恢复一个msdb数据库为别的名字，然后赶紧求助于互联网。经过了一番摸索终于可以从该数据库中提取出脚本。 现在把这脚本也放出来，希望有此需要的人做参考使用，亦或大家做学习之用，如果大家有好的方法也请讲出。 当然，要是在系统完好之前，直接备份就用不着这么麻烦了，直接在图形介面产生的脚本又快又准确。

 

CREATE  PROCEDURE  Get_JobList

as    

--  created by geton on 2014-08-16    

declare @jobnamecc  varchar(250)    

declare @strsql  varchar(5000)    

declare @jobname varchar(30),@category_calss_i int,@category_calss varchar(50),@category_name varchar(50),

        @category_type varchar(30),@category_id int,@category_type_i int    

    

    

declare joblist cursor for 

select [name]  from     msdb.dbo.sysjobs --where name='HR - AUTO GET COE' 



open joblist

    fetch next from joblist into @jobnamecc  

    while @@fetch_status=0    

       begin    

          begin try   

            select @jobname =@jobnamecc ,@category_calss = '',@category_name='',@category_type = ''    

    

                select 

                @category_calss = case when tshc.category_class = 1 then 'JOB'    

                                       when tshc.category_class = 2 then 'ALERT'    

                                       else 'OPERATOR'    

                                       end,

                @category_type = case when tshc.category_type = 1 then 'LOCAL'    

                                      when tshc.category_type = 2 then 'MULTI-SERVER'    

                                      else 'NONE'    

                                      end,     

                @category_name = tshc.name,    

                @category_type_i = category_type,    

                @category_calss_i = tshc.category_class,    

                @category_id = tshc.category_id    

                from    

                msdb.dbo.sysjobs_view as sv    -- Here "msdb.dbo.sysjobs_view" should be changed to the DB which you restored

                INNER JOIN msdb.dbo.syscategories  as tshc on sv.category_id = tshc.category_id  

                where    -- Here "msdb.dbo.syscategories" should be changed to the DB which you restored 

                (sv.name=@jobname AND tshc.category_class = 1)   --  category_class = 1 -- only job type are exported

    

    PRINT 'BEGIN TRANSACTION'    

    PRINT 'DECLARE @ReturnCode INT'   

    PRINT 'SELECT @ReturnCode = 0'  

    PRINT 'IF NOT EXISTS (SELECT name FROM msdb.dbo.syscategories WHERE name=N''' + @category_name +'''AND category_class=' +rtrim(@category_calss_i)+')'    

    PRINT 'BEGIN'    

    PRINT 'EXEC @ReturnCode = msdb.dbo.sp_add_category @class=N'''+ @category_calss+''', @type=N'''+@category_type+''', @name=N'''+@category_name+''''    

    PRINT 'IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback'    

    PRINT 'end'    

    

    declare @eventloglevel int,@emaillevel int,@netsendlevel int,@pagelevel int    

    declare @emailleveloprid nvarchar(256),@netsendleveloprid nvarchar(256),@pageleveloprid nvarchar(256)    

    declare @isenable int , @description nvarchar(1024),@owner_log_name nvarchar(512),@delete_level int    

    declare @jobid uniqueidentifier,@start_step_id int,@server nvarchar(512)    

    select    

    @eventloglevel=sv.notify_level_eventlog,    

    @emaillevel=sv.notify_level_email ,    

    @netsendlevel=sv.notify_level_netsend,     

    @pagelevel=sv.notify_level_page,     

    @emailleveloprid = isnull((select top 1 name from   msdb..sysoperators where id = sv.notify_email_operator_id),''),    

    @netsendleveloprid  =  isnull((select top 1 name from   msdb..sysoperators where id = sv.notify_netsend_operator_id),''),    

    @pageleveloprid = isnull((select top 1 name from   msdb..sysoperators where id = sv.notify_page_operator_id),'') ,   

    @isenable = sv.enabled ,   

    @description = sv.description ,   

    @owner_log_name = isnull(suser_sname(sv.owner_sid), N''''),  

    @delete_level = sv.delete_level,    

    @jobid = sv.job_id,    

    @start_step_id = start_step_id ,   

    @server = '(local)'--originating_server  --Due to this script would be executed on target machine,Here change the @server parameter to "LOCAL" 

    from msdb.dbo.sysjobs_view as sv    

    where (sv.name=@jobname )    

    

    --  select * from msdb.dbo.sysjobs_view

    PRINT 'DECLARE @jobId BINARY(16)'    

    PRINT 'EXEC @ReturnCode =  msdb.dbo.sp_add_job @job_name=N'''+@jobname+''','    

    PRINT ' @enabled='+RTRIM(@isenable)+', '    

    PRINT ' @notify_level_eventlog='+RTRIM(@eventloglevel)+', '    

    PRINT ' @notify_level_email='+RTRIM(@emaillevel)+', '    

    PRINT ' @notify_level_netsend='+RTRIM(@netsendlevel)+', '    

    PRINT ' @notify_level_page='+RTRIM(@pagelevel)+', '    

    PRINT ' @notify_email_operator_name ='''+RTRIM(@emailleveloprid)+''', '    

    PRINT ' @notify_netsend_operator_name='''+RTRIM(@netsendleveloprid)+''', '    

    PRINT ' @notify_page_operator_name='''+RTRIM(@pageleveloprid)+''', '    

    PRINT ' @delete_level='+RTRIM(@delete_level)+', '    

    PRINT ' @description=N'''+@description+''', '    

    PRINT ' @category_name=N'''+@category_name+''', '    

    PRINT ' @owner_login_name=N'''+@owner_log_name+''', '    

    PRINT ' @job_id = @jobId OUTPUT'    

    PRINT 'IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback'    

     --SELECT * FROM msdb.dbo.syscategories    





 



    declare @step_id int    

    declare @step_name nvarchar(512) ,@cmdexec_success_code int,@on_success_action int,@on_success_step_id int,   

            @on_fail_action int,@on_fail_step_id int,@retry_attempts int,@retry_interval int,@os_run_priority int,    

            @subsystem nvarchar(512),@database_name nvarchar(512),@flags int,@command nvarchar(max)    

    

    declare jbcur cursor  for  

    select step_id  from msdb..sysjobsteps  where job_id = @jobid order by step_id ;  

    --  "msdb..sysjobsteps"  should be changed to the DB which you restored

    open jbcur;    

    fetch next from jbcur into @step_id    

    while @@fetch_status = 0    

    begin    

           

       SELECT 

       @step_name = step_name,    

       @cmdexec_success_code= cmdexec_success_code ,   

       @on_success_action = on_success_action ,

       @on_success_step_id = on_success_step_id  ,  

       @on_fail_action = on_fail_action,    

       @on_fail_step_id = on_fail_step_id ,   

       @retry_attempts = retry_attempts,    

       @retry_interval = retry_interval,    

       @os_run_priority = os_run_priority,    

       @subsystem = subsystem,    

       @database_name = database_name,    

       @command = command,    

       @flags = flags    

     FROM  msdb..sysjobsteps a WHERE job_id = @jobid and step_id  = @step_id    

           

     PRINT ' EXEC @ReturnCode = msdb.dbo.sp_add_jobstep @job_id=@jobId, '    

     PRINT ' @step_name=N'''+@step_name+''', '    

     PRINT ' @step_id='+RTRIM(@step_id)+', '    

     PRINT ' @cmdexec_success_code='+RTRIM(@cmdexec_success_code)+', '    

     PRINT ' @on_success_action='+RTRIM(@on_success_action)+', '    

     PRINT ' @on_success_step_id='+RTRIM(@on_success_step_id)+', '    

     PRINT ' @on_fail_action='+RTRIM(@on_fail_action)+', '    

     PRINT ' @on_fail_step_id='+RTRIM(@on_fail_step_id)+', '    

     PRINT ' @retry_attempts='+RTRIM(@retry_attempts)+', '    

     PRINT ' @retry_interval='+RTRIM(@retry_interval)+', '    

     PRINT ' @os_run_priority='+RTRIM(@os_run_priority)+', @subsystem=N'''+@subsystem+''', '    

     PRINT ' @database_name=N'''+@database_name+''','    

     PRINT ' @flags='+RTRIM(@flags)+' ,'    

     PRINT ' @command=N'''+REPLACE(@command,'''','''''')+''''    

     PRINT ' IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback'    

    

    fetch next from jbcur into @step_id    

    

    end    

    

    close jbcur    

    deallocate jbcur    

           

    PRINT '    EXEC @ReturnCode = msdb.dbo.sp_update_job @job_id = @jobId, @start_step_id = '+rtrim(@start_step_id)    

    PRINT '    IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback    '    

    

    DECLARE @enabled INT,@freq_type INT,@freq_interval INT,@freq_subday_type INT,@freq_subday_interval INT    

     ,@freq_relative_interval INT,@freq_recurrence_factor INT,@active_start_date INT,@active_end_date INT    

     ,@active_start_time INT,@active_end_time INT,@name VARCHAR(512)    

    

    SELECT    

     @name = a.name,  

     @enabled = enabled ,  

     @freq_interval = freq_interval ,   

     @freq_type = freq_type  ,  

     @freq_subday_type=freq_subday_type,    

     @freq_subday_interval=freq_subday_interval,    

     @freq_relative_interval=freq_relative_interval  ,  

     @freq_recurrence_factor=freq_recurrence_factor ,   

     @active_start_date=active_start_date ,   

     @active_end_date=active_end_date ,   

     @active_start_time=active_start_time  ,  

     @active_end_time=active_end_time    

     FROM msdb..sysschedules a   -- "msdb..sysschedules"  should be changed to the DB which you restored

     INNER JOIN msdb.dbo.sysjobschedules b ON a.schedule_id = b.schedule_id  -- "msdb..sysjobschedules " should be changed to the DB which you restored

    WHERE  job_id = @jobid    

        

    IF(@name IS not null)    

    begin    

     PRINT '    EXEC @ReturnCode = msdb.dbo.sp_add_jobschedule @job_id=@jobId, @name=N'''+@name+''', '    

     PRINT '    @enabled='+RTRIM(@enabled)+', '    

     PRINT '    @freq_type='+RTRIM(@freq_type)+', '    

     PRINT '    @freq_interval='+RTRIM(@freq_interval)+', '    

     PRINT '    @freq_subday_type='+RTRIM(@freq_subday_type)+', '    

     PRINT '    @freq_subday_interval='+RTRIM(@freq_subday_interval)+', '    

     PRINT '    @freq_relative_interval='+RTRIM(@freq_relative_interval)+', '    

     PRINT '    @freq_recurrence_factor='+RTRIM(@freq_recurrence_factor)+', '    

     PRINT '    @active_start_date='+RTRIM(@active_start_date)+', '    

     PRINT '    @active_end_date='+RTRIM(@active_end_date)+', '    

     PRINT '    @active_start_time='+RTRIM(@active_start_time)+', '    

     PRINT '    @active_end_time='+RTRIM(@active_end_time)+' '    

     --PRINT '    @schedule_uid=N'''+RTRIM(NEWID())+''''    

     PRINT ' IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback'    

    end    

        

    

    PRINT ' EXEC @ReturnCode = msdb.dbo.sp_add_jobserver @job_id = @jobId, @server_name = N'''+@server+''''    

    PRINT ' IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback'    

    PRINT 'COMMIT TRANSACTION'    

    PRINT 'GOTO endSave'    

    PRINT 'QuitWithRollback:'    

    PRINT 'IF(@@TRANCOUNT>0)ROLLBACK TRANSACTION'    

    PRINT 'endSave:'    

    PRINT ' '    

    PRINT 'GO'          

              

     --PRINT @strsql      

     exec (@strsql)    

     end try    

   begin catch     

        declare @errmsg varchar(1000)    

        set @errmsg='[Prco_Get_IPDataBase]:'+ERROR_MESSAGE()    

        print @errmsg    

        print @strsql    

  end catch;     

       fetch next from joblist into @jobnamecc   

       end  

  

   close joblist    

   deallocate  joblist