【Arduino TFT】基于 ESP32S3 S7789 240x240 TFT实现的龙猫太空人天气时钟
忘记过去，超越自己
- ❤️ 博客主页 单片机菜鸟哥，一个野生非专业硬件IOT爱好者 ❤️
- ❤️ 本篇创建记录 2023-10-21 ❤️
- ❤️ 本篇更新记录 2023-10-21 ❤️
- 欢迎关注 点赞 收藏 ⭐️留言
- 此博客均由博主单独编写，不存在任何商业团队运营，如发现错误，请留言轰炸哦！及时修正！感谢支持！
- Arduino ESP8266教程累计帮助过超过1W+同学入门学习硬件网络编程，入选过选修课程，刊登过无线电杂志 零基础从入门到熟悉Arduino平台下开发ESP8266，同时会涉及网络编程知识。专栏文章累计超过60篇，分为基础篇、网络篇、应用篇、高级篇，涵盖ESP8266大部分开发技巧。
快速导航
单片机菜鸟的博客快速索引(快速找到你要的)
如果觉得有用，麻烦点赞收藏，您的支持是博主创作的动力。
文章目录
-
- 1. 前言
- 2. 软件代码
-
- 2.1 TFT屏幕的配置文件
- 2.2 主工程代码
- 2.3 tft显示代码
- 2.4 睡眠模式
- 2.5 获取天气信息
1. 前言
2. 软件代码
2.1 TFT屏幕的配置文件
// USER DEFINED SETTINGS
// Set driver type, fonts to be loaded, pins used and SPI control method etc
//
// See the User_Setup_Select.h file if you wish to be able to define multiple
// setups and then easily select which setup file is used by the compiler.
//
// If this file is edited correctly then all the library example sketches should
// run without the need to make any more changes for a particular hardware setup!
// Note that some sketches are designed for a particular TFT pixel width/height
// User defined information reported by "Read_User_Setup" test & diagnostics example
#define USER_SETUP_INFO "User_Setup"
// Define to disable all #warnings in library (can be put in User_Setup_Select.h)
//#define DISABLE_ALL_LIBRARY_WARNINGS
// ##################################################################################
//
// Section 1. Call up the right driver file and any options for it
//
// ##################################################################################
// Define STM32 to invoke optimised processor support (only for STM32)
//#define STM32
// Defining the STM32 board allows the library to optimise the performance
// for UNO compatible "MCUfriend" style shields
//#define NUCLEO_64_TFT
//#define NUCLEO_144_TFT
// STM32 8 bit parallel only:
// If STN32 Port A or B pins 0-7 are used for 8 bit parallel data bus bits 0-7
// then this will improve rendering performance by a factor of ~8x
//#define STM_PORTA_DATA_BUS
//#define STM_PORTB_DATA_BUS
// Tell the library to use parallel mode (otherwise SPI is assumed)
//#define TFT_PARALLEL_8_BIT
//#defined TFT_PARALLEL_16_BIT // **** 16 bit parallel ONLY for RP2040 processor ****
// Display type - only define if RPi display
//#define RPI_DISPLAY_TYPE // 20MHz maximum SPI
// Only define one driver, the other ones must be commented out
//#define ILI9341_DRIVER // Generic driver for common displays
//#define ILI9341_2_DRIVER // Alternative ILI9341 driver, see https://github.com/Bodmer/TFT_eSPI/issues/1172
//#define ST7735_DRIVER // Define additional parameters below for this display
//#define ILI9163_DRIVER // Define additional parameters below for this display
//#define S6D02A1_DRIVER
//#define RPI_ILI9486_DRIVER // 20MHz maximum SPI
//#define HX8357D_DRIVER
//#define ILI9481_DRIVER
//#define ILI9486_DRIVER
//#define ILI9488_DRIVER // WARNING: Do not connect ILI9488 display SDO to MISO if other devices share the SPI bus (TFT SDO does NOT tristate when CS is high)
#define ST7789_DRIVER // Full configuration option, define additional parameters below for this display
//#define ST7789_2_DRIVER // Minimal configuration option, define additional parameters below for this display
//#define R61581_DRIVER
//#define RM68140_DRIVER
//#define ST7796_DRIVER
//#define SSD1351_DRIVER
//#define SSD1963_480_DRIVER
//#define SSD1963_800_DRIVER
//#define SSD1963_800ALT_DRIVER
//#define ILI9225_DRIVER
//#define GC9A01_DRIVER
// Some displays support SPI reads via the MISO pin, other displays have a single
// bi-directional SDA pin and the library will try to read this via the MOSI line.
// To use the SDA line for reading data from the TFT uncomment the following line:
// #define TFT_SDA_READ // This option is for ESP32 ONLY, tested with ST7789 and GC9A01 display only
// For ST7735, ST7789 and ILI9341 ONLY, define the colour order IF the blue and red are swapped on your display
// Try ONE option at a time to find the correct colour order for your display
// #define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue
// #define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
// #define TFT_INVERSION_OFF
// For M5Stack ESP32 module with integrated ILI9341 display ONLY, remove // in line below
// #define M5STACK
// For ST7789, ST7735, ILI9163 and GC9A01 ONLY, define the pixel width and height in portrait orientation
// #define TFT_WIDTH 80
// #define TFT_WIDTH 128
// #define TFT_WIDTH 172 // ST7789 172 x 320
#define TFT_WIDTH 240 // ST7789 240 x 240 and 240 x 320
// #define TFT_HEIGHT 160
// #define TFT_HEIGHT 128
#define TFT_HEIGHT 240 // ST7789 240 x 240
// #define TFT_HEIGHT 320 // ST7789 240 x 320
// #define TFT_HEIGHT 240 // GC9A01 240 x 240
// For ST7735 ONLY, define the type of display, originally this was based on the
// colour of the tab on the screen protector film but this is not always true, so try
// out the different options below if the screen does not display graphics correctly,
// e.g. colours wrong, mirror images, or stray pixels at the edges.
// Comment out ALL BUT ONE of these options for a ST7735 display driver, save this
// this User_Setup file, then rebuild and upload the sketch to the board again:
// #define ST7735_INITB
// #define ST7735_GREENTAB
// #define ST7735_GREENTAB2
// #define ST7735_GREENTAB3
// #define ST7735_GREENTAB128 // For 128 x 128 display
// #define ST7735_GREENTAB160x80 // For 160 x 80 display (BGR, inverted, 26 offset)
// #define ST7735_ROBOTLCD // For some RobotLCD arduino shields (128x160, BGR, https://docs.arduino.cc/retired/getting-started-guides/TFT)
// #define ST7735_REDTAB
// #define ST7735_BLACKTAB
// #define ST7735_REDTAB160x80 // For 160 x 80 display with 24 pixel offset
// If colours are inverted (white shows as black) then uncomment one of the next
// 2 lines try both options, one of the options should correct the inversion.
// #define TFT_INVERSION_ON
// #define TFT_INVERSION_OFF
// ##################################################################################
//
// Section 2. Define the pins that are used to interface with the display here
//
// ##################################################################################
// If a backlight control signal is available then define the TFT_BL pin in Section 2
// below. The backlight will be turned ON when tft.begin() is called, but the library
// needs to know if the LEDs are ON with the pin HIGH or LOW. If the LEDs are to be
// driven with a PWM signal or turned OFF/ON then this must be handled by the user
// sketch. e.g. with digitalWrite(TFT_BL, LOW);
// #define TFT_BL 32 // LED back-light control pin
// #define TFT_BACKLIGHT_ON HIGH // Level to turn ON back-light (HIGH or LOW)
// We must use hardware SPI, a minimum of 3 GPIO pins is needed.
// Typical setup for ESP8266 NodeMCU ESP-12 is :
//
// Display SDO/MISO to NodeMCU pin D6 (or leave disconnected if not reading TFT)
// Display LED to NodeMCU pin VIN (or 5V, see below)
// Display SCK to NodeMCU pin D5
// Display SDI/MOSI to NodeMCU pin D7
// Display DC (RS/AO)to NodeMCU pin D3
// Display RESET to NodeMCU pin D4 (or RST, see below)
// Display CS to NodeMCU pin D8 (or GND, see below)
// Display GND to NodeMCU pin GND (0V)
// Display VCC to NodeMCU 5V or 3.3V
//
// The TFT RESET pin can be connected to the NodeMCU RST pin or 3.3V to free up a control pin
//
// The DC (Data Command) pin may be labelled AO or RS (Register Select)
//
// With some displays such as the ILI9341 the TFT CS pin can be connected to GND if no more
// SPI devices (e.g. an SD Card) are connected, in this case comment out the #define TFT_CS
// line below so it is NOT defined. Other displays such at the ST7735 require the TFT CS pin
// to be toggled during setup, so in these cases the TFT_CS line must be defined and connected.
//
// The NodeMCU D0 pin can be used for RST
//
//
// Note: only some versions of the NodeMCU provide the USB 5V on the VIN pin
// If 5V is not available at a pin you can use 3.3V but backlight brightness
// will be lower.
// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR ESP8266 SETUP ######
// // For NodeMCU - use pin numbers in the form PIN_Dx where Dx is the NodeMCU pin designation
// #define TFT_CS PIN_D8 // Chip select control pin D8
// #define TFT_DC PIN_D3 // Data Command control pin
// #define TFT_RST PIN_D4 // Reset pin (could connect to NodeMCU RST, see next line)
// //#define TFT_RST -1 // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V
//#define TFT_BL PIN_D1 // LED back-light (only for ST7789 with backlight control pin)
//#define TOUCH_CS PIN_D2 // Chip select pin (T_CS) of touch screen
//#define TFT_WR PIN_D2 // Write strobe for modified Raspberry Pi TFT only
// ###### FOR ESP8266 OVERLAP MODE EDIT THE PIN NUMBERS IN THE FOLLOWING LINES ######
// Overlap mode shares the ESP8266 FLASH SPI bus with the TFT so has a performance impact
// but saves pins for other functions. It is best not to connect MISO as some displays
// do not tristate that line when chip select is high!
// Note: Only one SPI device can share the FLASH SPI lines, so a SPI touch controller
// cannot be connected as well to the same SPI signals.
// On NodeMCU 1.0 SD0=MISO, SD1=MOSI, CLK=SCLK to connect to TFT in overlap mode
// On NodeMCU V3 S0 =MISO, S1 =MOSI, S2 =SCLK
// In ESP8266 overlap mode the following must be defined
//#define TFT_SPI_OVERLAP
// In ESP8266 overlap mode the TFT chip select MUST connect to pin D3
//#define TFT_CS PIN_D3
//#define TFT_DC PIN_D5 // Data Command control pin
//#define TFT_RST PIN_D4 // Reset pin (could connect to NodeMCU RST, see next line)
//#define TFT_RST -1 // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V
// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR ESP32 SETUP ######
// For ESP32 Dev board (only tested with ILI9341 display)
// The hardware SPI can be mapped to any pins
// #define TFT_MISO 19
// #define TFT_MOSI 23
// #define TFT_SCLK 18
// #define TFT_CS 15 // Chip select control pin
// #define TFT_DC 2 // Data Command control pin
// #define TFT_RST 4 // Reset pin (could connect to RST pin)
// #define TFT_RST -1 // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
// For ESP32 Dev board (only tested with GC9A01 display)
// The hardware SPI can be mapped to any pins
//#define TFT_MOSI 15 // In some display driver board, it might be written as "SDA" and so on.
//#define TFT_SCLK 14
//#define TFT_CS 5 // Chip select control pin
//#define TFT_DC 27 // Data Command control pin
//#define TFT_RST 33 // Reset pin (could connect to Arduino RESET pin)
//#define TFT_BL 22 // LED back-light
//#define TOUCH_CS 21 // Chip select pin (T_CS) of touch screen
//#define TFT_WR 22 // Write strobe for modified Raspberry Pi TFT only
// For the M5Stack module use these #define lines
//#define TFT_MISO 19
//#define TFT_MOSI 23
//#define TFT_SCLK 18
//#define TFT_CS 14 // Chip select control pin
//#define TFT_DC 27 // Data Command control pin
//#define TFT_RST 33 // Reset pin (could connect to Arduino RESET pin)
//#define TFT_BL 32 // LED back-light (required for M5Stack)
// ###### EDIT THE PINs BELOW TO SUIT YOUR ESP32 PARALLEL TFT SETUP ######
// The library supports 8 bit parallel TFTs with the ESP32, the pin
// selection below is compatible with ESP32 boards in UNO format.
// Wemos D32 boards need to be modified, see diagram in Tools folder.
// Only ILI9481 and ILI9341 based displays have been tested!
// Parallel bus is only supported for the STM32 and ESP32
// Example below is for ESP32 Parallel interface with UNO displays
// Tell the library to use 8 bit parallel mode (otherwise SPI is assumed)
//#define TFT_PARALLEL_8_BIT
// The ESP32 and TFT the pins used for testing are:
//#define TFT_CS 33 // Chip select control pin (library pulls permanently low
//#define TFT_DC 15 // Data Command control pin - must use a pin in the range 0-31
//#define TFT_RST 32 // Reset pin, toggles on startup
//#define TFT_WR 4 // Write strobe control pin - must use a pin in the range 0-31
//#define TFT_RD 2 // Read strobe control pin
//#define TFT_D0 12 // Must use pins in the range 0-31 for the data bus
//#define TFT_D1 13 // so a single register write sets/clears all bits.
//#define TFT_D2 26 // Pins can be randomly assigned, this does not affect
//#define TFT_D3 25 // TFT screen update performance.
//#define TFT_D4 17
//#define TFT_D5 16
//#define TFT_D6 27
//#define TFT_D7 14
// ###### EDIT THE PINs BELOW TO SUIT YOUR STM32 SPI TFT SETUP ######
// The TFT can be connected to SPI port 1 or 2
//#define TFT_SPI_PORT 1 // SPI port 1 maximum clock rate is 55MHz
//#define TFT_MOSI PA7
//#define TFT_MISO PA6
//#define TFT_SCLK PA5
//#define TFT_SPI_PORT 2 // SPI port 2 maximum clock rate is 27MHz
//#define TFT_MOSI PB15
//#define TFT_MISO PB14
//#define TFT_SCLK PB13
// Can use Ardiuno pin references, arbitrary allocation, TFT_eSPI controls chip select
//#define TFT_CS D5 // Chip select control pin to TFT CS
//#define TFT_DC D6 // Data Command control pin to TFT DC (may be labelled RS = Register Select)
//#define TFT_RST D7 // Reset pin to TFT RST (or RESET)
// OR alternatively, we can use STM32 port reference names PXnn
//#define TFT_CS PE11 // Nucleo-F767ZI equivalent of D5
//#define TFT_DC PE9 // Nucleo-F767ZI equivalent of D6
//#define TFT_RST PF13 // Nucleo-F767ZI equivalent of D7
//#define TFT_RST -1 // Set TFT_RST to -1 if the display RESET is connected to processor reset
// Use an Arduino pin for initial testing as connecting to processor reset
// may not work (pulse too short at power up?)
// #define TFT_MISO 19
// #define TFT_MOSI 23 // In some display driver board, it might be written as "SDA" and so on.
// #define TFT_SCLK 18
// #define TFT_CS -1 // Chip select control pin
// #define TFT_DC 16 // Data Command control pin
// #define TFT_RST 17 // Reset pin (could connect to Arduino RESET pin)
// #define TFT_BL 4 // LED back-light
#define TFT_CS -1 // 10 or 34 (FSPI CS0)
#define TFT_MOSI 11 // 11 or 35 (FSPI D)
#define TFT_SCLK 12 // 12 or 36 (FSPI CLK)
#define TFT_MISO -1 // 13 or 37 (FSPI Q)
// Use pins in range 0-31
#define TFT_DC 7
#define TFT_RST 6
#define TFT_BL 4 // LED back-light
// ##################################################################################
//
// Section 3. Define the fonts that are to be used here
//
// ##################################################################################
// Comment out the #defines below with // to stop that font being loaded
// The ESP8366 and ESP32 have plenty of memory so commenting out fonts is not
// normally necessary. If all fonts are loaded the extra FLASH space required is
// about 17Kbytes. To save FLASH space only enable the fonts you need!
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
// Comment out the #define below to stop the SPIFFS filing system and smooth font code being loaded
// this will save ~20kbytes of FLASH
#define SMOOTH_FONT
// ##################################################################################
//
// Section 4. Other options
//
// ##################################################################################
// For RP2040 processor and SPI displays, uncomment the following line to use the PIO interface.
//#define RP2040_PIO_SPI // Leave commented out to use standard RP2040 SPI port interface
// For RP2040 processor and 8 or 16 bit parallel displays:
// The parallel interface write cycle period is derived from a division of the CPU clock
// speed so scales with the processor clock. This means that the divider ratio may need
// to be increased when overclocking. I may also need to be adjusted dependant on the
// display controller type (ILI94341, HX8357C etc). If RP2040_PIO_CLK_DIV is not defined
// the library will set default values which may not suit your display.
// The display controller data sheet will specify the minimum write cycle period. The
// controllers often work reliably for shorter periods, however if the period is too short
// the display may not initialise or graphics will become corrupted.
// PIO write cycle frequency = (CPU clock/(4 * RP2040_PIO_CLK_DIV))
//#define RP2040_PIO_CLK_DIV 1 // 32ns write cycle at 125MHz CPU clock
//#define RP2040_PIO_CLK_DIV 2 // 64ns write cycle at 125MHz CPU clock
//#define RP2040_PIO_CLK_DIV 3 // 96ns write cycle at 125MHz CPU clock
// For the RP2040 processor define the SPI port channel used (default 0 if undefined)
//#define TFT_SPI_PORT 1 // Set to 0 if SPI0 pins are used, or 1 if spi1 pins used
// For the STM32 processor define the SPI port channel used (default 1 if undefined)
//#define TFT_SPI_PORT 2 // Set to 1 for SPI port 1, or 2 for SPI port 2
// Define the SPI clock frequency, this affects the graphics rendering speed. Too
// fast and the TFT driver will not keep up and display corruption appears.
// With an ILI9341 display 40MHz works OK, 80MHz sometimes fails
// With a ST7735 display more than 27MHz may not work (spurious pixels and lines)
// With an ILI9163 display 27 MHz works OK.
// #define SPI_FREQUENCY 1000000
// #define SPI_FREQUENCY 5000000
// #define SPI_FREQUENCY 10000000
// #define SPI_FREQUENCY 20000000
// #define SPI_FREQUENCY 27000000
#define SPI_FREQUENCY 27000000
// #define SPI_FREQUENCY 40000000
// #define SPI_FREQUENCY 55000000 // STM32 SPI1 only (SPI2 maximum is 27MHz)
// #define SPI_FREQUENCY 80000000
// Optional reduced SPI frequency for reading TFT
#define SPI_READ_FREQUENCY 20000000
// The XPT2046 requires a lower SPI clock rate of 2.5MHz so we define that here:
#define SPI_TOUCH_FREQUENCY 2500000
// The ESP32 has 2 free SPI ports i.e. VSPI and HSPI, the VSPI is the default.
// If the VSPI port is in use and pins are not accessible (e.g. TTGO T-Beam)
// then uncomment the following line:
//#define USE_HSPI_PORT
// Comment out the following #define if "SPI Transactions" do not need to be
// supported. When commented out the code size will be smaller and sketches will
// run slightly faster, so leave it commented out unless you need it!
// Transaction support is needed to work with SD library but not needed with TFT_SdFat
// Transaction support is required if other SPI devices are connected.
// Transactions are automatically enabled by the library for an ESP32 (to use HAL mutex)
// so changing it here has no effect
// #define SUPPORT_TRANSACTIONS
2.2 主工程代码
/*
* 程序硬件介绍 ESP32 + LCD屏幕（ST7789）
* 屏幕使用的中景园1.3寸240分辨率全彩屏幕，具体请自己参考引脚定义
*/
#include 2.3 tft显示代码
//初始化屏幕
extern void tft_init(void){
tft.begin(); // TFT初始化
tft.setRotation(0); // 旋转角度0-3
tft.setTextColor(TFT_BLACK, TFT_WHITE); //设置字体颜色
tft.fillScreen(TFT_BLACK); // 清屏
TJpgDec.setJpgScale(1); // 设置放大倍数
TJpgDec.setSwapBytes(true); // 它的作用是设置TFT液晶屏的像素字节序。在某些情况下，像素字节序可能需要被交换，以确保图像正确显示。这段代码中的true表示需要交换字节序，而false则表示不需要交换字节序。
TJpgDec.setCallback(tft_output); // 回调函数
}
extern bool tft_output(int16_t x, int16_t y, uint16_t w, uint16_t h, uint16_t *bitmap) {
if (y >= tft.height())
return 0;
// 这句代码是将一个位图(bitmap)显示在TFT屏幕上，其中x和y是位图左上角的坐标，w和h是位图的宽度和高度。具体来说，它将位图的像素数据推送到TFT屏幕上，从而在指定的位置显示出来。
tft.pushImage(x, y, w, h, bitmap);
return 1;
}
// 进度条
byte loadNum = 6;
extern void tft_display_loading(byte delayTime){
clk.setColorDepth(8); // 设置TFT屏幕的颜色深度为8位。TFT屏幕的颜色深度指的是每个像素点可以显示的颜色数量，8位颜色深度可以显示256种颜色。
clk.createSprite(200, 50); // 创建Sprite
clk.fillSprite(TFT_BLACK); // 填充颜色：黑色
clk.drawRoundRect(0, 0, 200, 16, 8, TFT_WHITE); // 画一个圆角矩形框，白色
clk.fillRoundRect(3, 3, loadNum, 10, 5, TFT_WHITE); // 画一个填充的圆角矩形，白色
clk.setTextDatum(CC_DATUM); // 设置文本显示基准为居中对齐
clk.setTextColor(TFT_GREEN, TFT_BLACK); // 设置文本的前景色和背景色
clk.drawString("Connecting to WiFi", 100, 40, 2); // 显示“Connecting to WiFi”这个字符串，位置为(100,40)，字体大小为2。
clk.pushSprite(20, 110); // Sprite中内容一次推向屏幕
clk.deleteSprite(); // 删除Sprite
loadNum += 1;
if (loadNum >= 194)
{
loadNum = 194;
}
delay(delayTime);
}
// 将进度条刷到100%
extern void tft_display_loading_complete(void){
while (loadNum < 194) { //让动画走完
tft_display_loading(1);
}
}
// 绘制屏幕布局
extern void tft_display_layout(void){
//绘制顶部视图
//TJpgDec.drawJpg(0, 0, watchtop, sizeof(watchtop));
//绘制底部视图
//TJpgDec.drawJpg(0, 220, watchbottom, sizeof(watchbottom));
//绘制中间显示窗口
tft.setViewport(0, 0, 240, 240); // 设置TFT屏幕的裁剪区域，即在屏幕上显示的区域。其中，(0,0)是起始坐标，(240,240)是宽度和高度。这意味着只有在这个区域内的图像才会被显示在屏幕上，超出这个区域的部分将被裁剪掉。
tft.fillScreen(TFT_BLACK); // 填充颜色：黑色
tft.fillRoundRect(0, 0, 240, 240, 7, TFT_WHITE); // 表示在TFT屏幕上绘制一个左上角坐标为(0, 0)，宽度和高度均为240像素，圆角半径为7像素，填充颜色为白色的圆角矩形。
// 在窗口内绘制线框，黑色边框
tft.drawFastHLine(0, 34, 240, TFT_BLACK); // 在屏幕上从(0,34)这个点开始，绘制一条长度为240像素，颜色为黑色的水平线条
tft.drawFastVLine(150, 0, 34, TFT_BLACK); // 在屏幕上从(150,0)这个点开始，绘制一条长度为34像素，颜色为黑色的垂直线条
tft.drawFastHLine(0, 206, 240, TFT_BLACK); // 表示在屏幕上从(0,206)这个点开始，绘制一条长度为240像素，颜色为黑色的水平线条
tft.drawFastVLine(60, 206, 34, TFT_BLACK); // 在屏幕上从(60,206)这个点开始，绘制长度为34像素，颜色为黑色的垂直线条
tft.drawFastVLine(160, 206, 34, TFT_BLACK); // 在屏幕上从(160,206)这个点开始，绘制长度为34像素，颜色为黑色的垂直线条
// 在窗口内绘制图标
TJpgDec.drawJpg(162, 150, humidity, sizeof(humidity)); //湿度图标
TJpgDec.drawJpg(163, 210, temperature, sizeof(temperature)); //温度图标
}
// 刷新时间显示
extern void tft_display_time(void){
// 记录上一次时间
static String hourMinute_old = "";
static String second_old = "";
static String week_old = "";
static String monthDay_old = "";
String hourMinute_now = hourMinute();
String second_now = num2str(second());
String week_now = week();
String monthDay_now = monthDay();
clk.setColorDepth(8); // 设置TFT屏幕的颜色深度为8位。TFT屏幕的颜色深度指的是每个像素点可以显示的颜色数量，8位颜色深度可以显示256种颜色。
//--------------------中间时间区显示开始--------------------
// 时分
if(hourMinute_now != hourMinute_old){
hourMinute_old = hourMinute_now;
clk.createSprite(140, 48); // 创建Sprite，先在Sprite内存中画点，然后将内存中的点一次推向屏幕，这样刷新比较快
clk.fillSprite(TFT_WHITE); // 填充颜色：白色
//clk.loadFont(FxLED_48);
clk.setTextDatum(CC_DATUM); // 设置文本显示基准为居中对齐。
clk.setTextColor(TFT_BLACK, TFT_WHITE); // 文本的前景色和背景色
clk.drawString(hourMinute_now, 70, 24, 7); // 绘制显示时和分，位置为(70,24)，字体大小为 7。
//clk.unloadFont();
clk.pushSprite(28, 40); // Sprite中内容一次推向屏幕
clk.deleteSprite(); // 删除Sprite
}
// 秒
if(second_now != second_old){
second_old = second_now;
clk.createSprite(40, 32);
clk.fillSprite(TFT_WHITE);
clk.loadFont(FxLED_32); // 加载字体
clk.setTextDatum(CC_DATUM);
clk.setTextColor(TFT_BLACK, TFT_WHITE);
clk.drawString(second_now, 20, 16);
clk.unloadFont(); // 卸载字体
clk.pushSprite(170, 60);
clk.deleteSprite();
}
//--------------------中间时间区显示结束--------------------
//--------------------底部时间区显示开始--------------------
clk.loadFont(ZdyLwFont_20); // 加载汉字字体
// 星期
if(week_now != week_old){
week_old = week_now;
clk.createSprite(56, 30);
clk.fillSprite(TFT_WHITE);
clk.setTextDatum(CC_DATUM);
clk.setTextColor(TFT_BLACK, TFT_WHITE);
clk.drawString(week_now, 28, 15); // 周几
clk.pushSprite(2, 208);
clk.deleteSprite();
}
// 月日
if(monthDay_now != monthDay_old) {
monthDay_old = monthDay_now;
clk.createSprite(98, 30);
clk.fillSprite(TFT_WHITE);
clk.setTextDatum(CC_DATUM);
clk.setTextColor(TFT_BLACK, TFT_WHITE);
clk.drawString(monthDay_now, 49, 15); // 几月几日
clk.pushSprite(61, 208);
clk.deleteSprite();
}
clk.unloadFont(); // 卸载字体
//--------------------底部时间区显示结束--------------------
}
// 刷新gif
extern void tft_display_gif(bool isChangeMode) {
static uint8_t mode = 0;
static uint8_t index = 0;
static uint32_t time_old = 0;
uint8_t x,y,dt;
uint32_t time_now = 0;
if(isChangeMode) {
mode += 1;
if(mode > 3) mode=1;
index = 0;
time_old = 0;
}
// 修改动画的播放速度
switch(mode) {
case 1:x=80;y=104;dt=40;break; //动画-龙猫跳绳
case 2:x=80;y=114;dt=50;break; //动画-龙猫转圈
case 3:x=83;y=114;dt=30;break; //动画-太空人(胖)
}
time_now = millis();
if(time_now - time_old >= dt) {
index += 1;
time_old = time_now;
}
if(mode == 1) { //动画-龙猫跳绳
switch(index) {
case 1: TJpgDec.drawJpg(x,y,chinchilla_1_0, sizeof(chinchilla_1_0));break;
case 2: TJpgDec.drawJpg(x,y,chinchilla_1_1, sizeof(chinchilla_1_1));break;
case 3: TJpgDec.drawJpg(x,y,chinchilla_1_2, sizeof(chinchilla_1_2));break;
case 4: TJpgDec.drawJpg(x,y,chinchilla_1_3, sizeof(chinchilla_1_3));break;
case 5: TJpgDec.drawJpg(x,y,chinchilla_1_4, sizeof(chinchilla_1_4));break;
case 6: TJpgDec.drawJpg(x,y,chinchilla_1_5, sizeof(chinchilla_1_5));break;
case 7: TJpgDec.drawJpg(x,y,chinchilla_1_6, sizeof(chinchilla_1_6));break;
case 8: TJpgDec.drawJpg(x,y,chinchilla_1_7, sizeof(chinchilla_1_7));break;
case 9: TJpgDec.drawJpg(x,y,chinchilla_1_8, sizeof(chinchilla_1_8));break;
case 10: TJpgDec.drawJpg(x,y,chinchilla_1_9, sizeof(chinchilla_1_9));break;
case 11: TJpgDec.drawJpg(x,y,chinchilla_1_10, sizeof(chinchilla_1_10));break;
case 12: TJpgDec.drawJpg(x,y,chinchilla_1_11, sizeof(chinchilla_1_11));break;
case 13: TJpgDec.drawJpg(x,y,chinchilla_1_12, sizeof(chinchilla_1_12));break;
case 14: TJpgDec.drawJpg(x,y,chinchilla_1_13, sizeof(chinchilla_1_13));break;
case 15: TJpgDec.drawJpg(x,y,chinchilla_1_14, sizeof(chinchilla_1_14));break;
case 16: TJpgDec.drawJpg(x,y,chinchilla_1_15, sizeof(chinchilla_1_15));break;
case 17: TJpgDec.drawJpg(x,y,chinchilla_1_16, sizeof(chinchilla_1_16));break;
case 18: TJpgDec.drawJpg(x,y,chinchilla_1_17, sizeof(chinchilla_1_17));break;
case 19: TJpgDec.drawJpg(x,y,chinchilla_1_18, sizeof(chinchilla_1_18));break;
case 20: TJpgDec.drawJpg(x,y,chinchilla_1_19, sizeof(chinchilla_1_19));break;
case 21: TJpgDec.drawJpg(x,y,chinchilla_1_20, sizeof(chinchilla_1_20));break;
case 22: TJpgDec.drawJpg(x,y,chinchilla_1_21, sizeof(chinchilla_1_21));break;
case 23: TJpgDec.drawJpg(x,y,chinchilla_1_22, sizeof(chinchilla_1_22));break;
case 24: TJpgDec.drawJpg(x,y,chinchilla_1_23, sizeof(chinchilla_1_23));break;
case 25: TJpgDec.drawJpg(x,y,chinchilla_1_24, sizeof(chinchilla_1_24));break;
case 26: TJpgDec.drawJpg(x,y,chinchilla_1_25, sizeof(chinchilla_1_25));break;
case 27: TJpgDec.drawJpg(x,y,chinchilla_1_26, sizeof(chinchilla_1_26));break;
case 28: TJpgDec.drawJpg(x,y,chinchilla_1_27, sizeof(chinchilla_1_27));break;
case 29: TJpgDec.drawJpg(x,y,chinchilla_1_28, sizeof(chinchilla_1_28));break;
case 30: TJpgDec.drawJpg(x,y,chinchilla_1_29, sizeof(chinchilla_1_29));break;
case 31: TJpgDec.drawJpg(x,y,chinchilla_1_30, sizeof(chinchilla_1_30));break;
case 32: TJpgDec.drawJpg(x,y,chinchilla_1_31, sizeof(chinchilla_1_31));break;
case 33: TJpgDec.drawJpg(x,y,chinchilla_1_32, sizeof(chinchilla_1_32));break;
case 34: TJpgDec.drawJpg(x,y,chinchilla_1_33, sizeof(chinchilla_1_33));break;
case 35: TJpgDec.drawJpg(x,y,chinchilla_1_34, sizeof(chinchilla_1_34));break;
case 36: TJpgDec.drawJpg(x,y,chinchilla_1_35, sizeof(chinchilla_1_35));break;
case 37: TJpgDec.drawJpg(x,y,chinchilla_1_36, sizeof(chinchilla_1_36));break;
case 38: TJpgDec.drawJpg(x,y,chinchilla_1_37, sizeof(chinchilla_1_37));break;
case 39: TJpgDec.drawJpg(x,y,chinchilla_1_38, sizeof(chinchilla_1_38));break;
case 40: TJpgDec.drawJpg(x,y,chinchilla_1_39, sizeof(chinchilla_1_39));index=0;break;
}
} else if(mode == 2) { //动画-龙猫转圈
switch(index) {
case 1: TJpgDec.drawJpg(x,y,chinchilla_2_0, sizeof(chinchilla_2_0));break;
case 2: TJpgDec.drawJpg(x,y,chinchilla_2_1, sizeof(chinchilla_2_1));break;
case 3: TJpgDec.drawJpg(x,y,chinchilla_2_2, sizeof(chinchilla_2_2));break;
case 4: TJpgDec.drawJpg(x,y,chinchilla_2_3, sizeof(chinchilla_2_3));break;
case 5: TJpgDec.drawJpg(x,y,chinchilla_2_4, sizeof(chinchilla_2_4));break;
case 6: TJpgDec.drawJpg(x,y,chinchilla_2_5, sizeof(chinchilla_2_5));break;
case 7: TJpgDec.drawJpg(x,y,chinchilla_2_6, sizeof(chinchilla_2_6));break;
case 8: TJpgDec.drawJpg(x,y,chinchilla_2_7, sizeof(chinchilla_2_7));break;
case 9: TJpgDec.drawJpg(x,y,chinchilla_2_8, sizeof(chinchilla_2_8));break;
case 10: TJpgDec.drawJpg(x,y,chinchilla_2_9, sizeof(chinchilla_2_9));break;
case 11: TJpgDec.drawJpg(x,y,chinchilla_2_10, sizeof(chinchilla_2_10));break;
case 12: TJpgDec.drawJpg(x,y,chinchilla_2_11, sizeof(chinchilla_2_11));break;
case 13: TJpgDec.drawJpg(x,y,chinchilla_2_12, sizeof(chinchilla_2_12));break;
case 14: TJpgDec.drawJpg(x,y,chinchilla_2_13, sizeof(chinchilla_2_13));break;
case 15: TJpgDec.drawJpg(x,y,chinchilla_2_14, sizeof(chinchilla_2_14));break;
case 16: TJpgDec.drawJpg(x,y,chinchilla_2_15, sizeof(chinchilla_2_15));break;
case 17: TJpgDec.drawJpg(x,y,chinchilla_2_16, sizeof(chinchilla_2_16));break;
case 18: TJpgDec.drawJpg(x,y,chinchilla_2_17, sizeof(chinchilla_2_17));break;
case 19: TJpgDec.drawJpg(x,y,chinchilla_2_18, sizeof(chinchilla_2_18));break;
case 20: TJpgDec.drawJpg(x,y,chinchilla_2_19, sizeof(chinchilla_2_19));break;
case 21: TJpgDec.drawJpg(x,y,chinchilla_2_20, sizeof(chinchilla_2_20));break;
case 22: TJpgDec.drawJpg(x,y,chinchilla_2_21, sizeof(chinchilla_2_21));break;
case 23: TJpgDec.drawJpg(x,y,chinchilla_2_22, sizeof(chinchilla_2_22));break;
case 24: TJpgDec.drawJpg(x,y,chinchilla_2_23, sizeof(chinchilla_2_23));break;
case 25: TJpgDec.drawJpg(x,y,chinchilla_2_24, sizeof(chinchilla_2_24));break;
case 26: TJpgDec.drawJpg(x,y,chinchilla_2_25, sizeof(chinchilla_2_25));break;
case 27: TJpgDec.drawJpg(x,y,chinchilla_2_26, sizeof(chinchilla_2_26));break;
case 28: TJpgDec.drawJpg(x,y,chinchilla_2_27, sizeof(chinchilla_2_27));break;
case 29: TJpgDec.drawJpg(x,y,chinchilla_2_28, sizeof(chinchilla_2_28));break;
case 30: TJpgDec.drawJpg(x,y,chinchilla_2_29, sizeof(chinchilla_2_29));break;
case 31: TJpgDec.drawJpg(x,y,chinchilla_2_30, sizeof(chinchilla_2_30));break;
case 32: TJpgDec.drawJpg(x,y,chinchilla_2_31, sizeof(chinchilla_2_31));break;
case 33: TJpgDec.drawJpg(x,y,chinchilla_2_32, sizeof(chinchilla_2_32));break;
case 34: TJpgDec.drawJpg(x,y,chinchilla_2_33, sizeof(chinchilla_2_33));break;
case 35: TJpgDec.drawJpg(x,y,chinchilla_2_34, sizeof(chinchilla_2_34));break;
case 36: TJpgDec.drawJpg(x,y,chinchilla_2_35, sizeof(chinchilla_2_35));break;
case 37: TJpgDec.drawJpg(x,y,chinchilla_2_36, sizeof(chinchilla_2_36));break;
case 38: TJpgDec.drawJpg(x,y,chinchilla_2_37, sizeof(chinchilla_2_37));break;
case 39: TJpgDec.drawJpg(x,y,chinchilla_2_38, sizeof(chinchilla_2_38));break;
case 40: TJpgDec.drawJpg(x,y,chinchilla_2_39, sizeof(chinchilla_2_39));break;
case 41: TJpgDec.drawJpg(x,y,chinchilla_2_40, sizeof(chinchilla_2_40));break;
case 42: TJpgDec.drawJpg(x,y,chinchilla_2_41, sizeof(chinchilla_2_41));break;
case 43: TJpgDec.drawJpg(x,y,chinchilla_2_42, sizeof(chinchilla_2_42));break;
case 44: TJpgDec.drawJpg(x,y,chinchilla_2_43, sizeof(chinchilla_2_43));break;
case 45: TJpgDec.drawJpg(x,y,chinchilla_2_44, sizeof(chinchilla_2_44));break;
case 46: TJpgDec.drawJpg(x,y,chinchilla_2_45, sizeof(chinchilla_2_45));break;
case 47: TJpgDec.drawJpg(x,y,chinchilla_2_46, sizeof(chinchilla_2_46));break;
case 48: TJpgDec.drawJpg(x,y,chinchilla_2_47, sizeof(chinchilla_2_47));break;
case 49: TJpgDec.drawJpg(x,y,chinchilla_2_48, sizeof(chinchilla_2_48));break;
case 50: TJpgDec.drawJpg(x,y,chinchilla_2_49, sizeof(chinchilla_2_49));break;
case 51: TJpgDec.drawJpg(x,y,chinchilla_2_50, sizeof(chinchilla_2_50));break;
case 52: TJpgDec.drawJpg(x,y,chinchilla_2_51, sizeof(chinchilla_2_51));break;
case 53: TJpgDec.drawJpg(x,y,chinchilla_2_52, sizeof(chinchilla_2_52));break;
case 54: TJpgDec.drawJpg(x,y,chinchilla_2_53, sizeof(chinchilla_2_53));break;
case 55: TJpgDec.drawJpg(x,y,chinchilla_2_54, sizeof(chinchilla_2_54));break;
case 56: TJpgDec.drawJpg(x,y,chinchilla_2_55, sizeof(chinchilla_2_55));break;
case 57: TJpgDec.drawJpg(x,y,chinchilla_2_56, sizeof(chinchilla_2_56));break;
case 58: TJpgDec.drawJpg(x,y,chinchilla_2_57, sizeof(chinchilla_2_57));break;
case 59: TJpgDec.drawJpg(x,y,chinchilla_2_58, sizeof(chinchilla_2_58));break;
case 60: TJpgDec.drawJpg(x,y,chinchilla_2_59, sizeof(chinchilla_2_59));break;
case 61: TJpgDec.drawJpg(x,y,chinchilla_2_60, sizeof(chinchilla_2_60));break;
case 62: TJpgDec.drawJpg(x,y,chinchilla_2_61, sizeof(chinchilla_2_61));break;
case 63: TJpgDec.drawJpg(x,y,chinchilla_2_62, sizeof(chinchilla_2_62));break;
case 64: TJpgDec.drawJpg(x,y,chinchilla_2_63, sizeof(chinchilla_2_63));break;
case 65: TJpgDec.drawJpg(x,y,chinchilla_2_64, sizeof(chinchilla_2_64));break;
case 66: TJpgDec.drawJpg(x,y,chinchilla_2_65, sizeof(chinchilla_2_65));break;
case 67: TJpgDec.drawJpg(x,y,chinchilla_2_66, sizeof(chinchilla_2_66));break;
case 68: TJpgDec.drawJpg(x,y,chinchilla_2_67, sizeof(chinchilla_2_67));break;
case 69: TJpgDec.drawJpg(x,y,chinchilla_2_68, sizeof(chinchilla_2_68));break;
case 70: TJpgDec.drawJpg(x,y,chinchilla_2_69, sizeof(chinchilla_2_69));break;
case 71: TJpgDec.drawJpg(x,y,chinchilla_2_70, sizeof(chinchilla_2_70));break;
case 72: TJpgDec.drawJpg(x,y,chinchilla_2_71, sizeof(chinchilla_2_71));break;
case 73: TJpgDec.drawJpg(x,y,chinchilla_2_72, sizeof(chinchilla_2_72));break;
case 74: TJpgDec.drawJpg(x,y,chinchilla_2_73, sizeof(chinchilla_2_73));break;
case 75: TJpgDec.drawJpg(x,y,chinchilla_2_74, sizeof(chinchilla_2_74));break;
case 76: TJpgDec.drawJpg(x,y,chinchilla_2_75, sizeof(chinchilla_2_75));break;
case 77: TJpgDec.drawJpg(x,y,chinchilla_2_76, sizeof(chinchilla_2_76));break;
case 78: TJpgDec.drawJpg(x,y,chinchilla_2_77, sizeof(chinchilla_2_77));break;
case 79: TJpgDec.drawJpg(x,y,chinchilla_2_78, sizeof(chinchilla_2_78));break;
case 80: TJpgDec.drawJpg(x,y,chinchilla_2_79, sizeof(chinchilla_2_79));index=0;break;
}
} else if(mode == 3) { //动画-太空人
switch(index) {
case 1: TJpgDec.drawJpg(x,y,Astronaut_1_0, sizeof(Astronaut_1_0));break;
case 2: TJpgDec.drawJpg(x,y,Astronaut_1_1, sizeof(Astronaut_1_1));break;
case 3: TJpgDec.drawJpg(x,y,Astronaut_1_2, sizeof(Astronaut_1_2));break;
case 4: TJpgDec.drawJpg(x,y,Astronaut_1_3, sizeof(Astronaut_1_3));break;
case 5: TJpgDec.drawJpg(x,y,Astronaut_1_4, sizeof(Astronaut_1_4));break;
case 6: TJpgDec.drawJpg(x,y,Astronaut_1_5, sizeof(Astronaut_1_5));break;
case 7: TJpgDec.drawJpg(x,y,Astronaut_1_6, sizeof(Astronaut_1_6));break;
case 8: TJpgDec.drawJpg(x,y,Astronaut_1_7, sizeof(Astronaut_1_7));break;
case 9: TJpgDec.drawJpg(x,y,Astronaut_1_8, sizeof(Astronaut_1_8));break;
case 10: TJpgDec.drawJpg(x,y,Astronaut_1_9, sizeof(Astronaut_1_9));index=0;break;
}
} else{
mode = 0;
index = 0;
time_old = 0;
}
}
String scrollText[6];
// 天气信息写到屏幕上
extern void tft_display_weather(String *cityDZ, String *dataSK, String *dataFC)
{
DynamicJsonDocument doc(1024);
deserializeJson(doc, *dataSK);
JsonObject sk = doc.as<JsonObject>();
/***绘制相关文字***/
clk.setColorDepth(8);
clk.loadFont(ZdyLwFont_20); // 加载汉字字体
// 温度
clk.createSprite(52, 30); // 创建Sprite
clk.fillSprite(TFT_WHITE); // 填充颜色
clk.setTextDatum(CC_DATUM); // 显示对齐方式
clk.setTextColor(TFT_BLACK, TFT_WHITE); // 文本的前景色和背景色
clk.drawString(sk["temp"].as<String>() + "℃", 26, 15); // 显示文本
clk.pushSprite(184, 208); // Sprite中内容一次推向屏幕
clk.deleteSprite(); // 删除Sprite
// 城市名称
clk.createSprite(84, 30);
clk.fillSprite(TFT_WHITE);
clk.setTextDatum(CC_DATUM);
clk.setTextColor(TFT_BLACK, TFT_WHITE);
clk.drawString(sk["cityname"].as<String>(), 42, 15);
clk.pushSprite(151, 1);
clk.deleteSprite();
// PM2.5空气指数
uint16_t pm25TFT_COLOR = tft.color565(156, 202, 127); // 优
String aqiTxt = "优";
int pm25V = sk["aqi"];
if (pm25V > 200){
pm25TFT_COLOR = tft.color565(136, 11, 32); // 重度
aqiTxt = "重度";
}else if (pm25V > 150){
pm25TFT_COLOR = tft.color565(186, 55, 121); // 中度
aqiTxt = "中度";
}else if (pm25V > 100){
pm25TFT_COLOR = tft.color565(242, 159, 57); // 轻
aqiTxt = "轻度";
}else if (pm25V > 50){
pm25TFT_COLOR = tft.color565(247, 219, 100); // 良
aqiTxt = "良";
}
// 先绘制背景颜色
clk.createSprite(50, 24);
clk.fillSprite(TFT_WHITE);
clk.fillRoundRect(0, 0, 50, 24, 4, pm25TFT_COLOR);
// 再绘制文本
clk.setTextDatum(CC_DATUM);
clk.setTextColor(TFT_WHITE);
clk.drawString(aqiTxt, 25, 13);
clk.pushSprite(5, 150);
clk.deleteSprite();
// 湿度
clk.createSprite(56, 24);
clk.fillSprite(TFT_WHITE);
clk.setTextDatum(CC_DATUM);
clk.setTextColor(TFT_BLACK, TFT_WHITE);
clk.drawString(sk["SD"].as<String>(), 28, 13);
clk.pushSprite(185, 150);
clk.deleteSprite();
scrollText[0] = "实时天气 " + sk["weather"].as<String>();
scrollText[1] = "空气质量 " + aqiTxt;
scrollText[2] = "风向 " + sk["WD"].as<String>() + sk["WS"].as<String>();
// 左上角滚动字幕
// 解析第二段JSON
deserializeJson(doc, *cityDZ);
JsonObject dz = doc.as<JsonObject>();
//Serial.println(sk["ws"].as());
//横向滚动方式
//String aa = "今日天气:" + dz["weather"].as() + "，温度:最低" + dz["tempn"].as() + "，最高" + dz["temp"].as() + " 空气质量:" + aqiTxt + "，风向:" + dz["wd"].as() + dz["ws"].as();
//scrollTextWidth = clk.textWidth(scrollText);
//Serial.println(aa);
scrollText[3] = "今日" + dz["weather"].as<String>();
deserializeJson(doc, *dataFC);
JsonObject fc = doc.as<JsonObject>();
scrollText[4] = "最低温度" + fc["fd"].as<String>() + "℃";
scrollText[5] = "最高温度" + fc["fc"].as<String>() + "℃";
//Serial.println(scrollText[0]);
clk.unloadFont();
}
int currentIndex = 0;
int prevTime = 0;
TFT_eSprite clkb = TFT_eSprite(&tft);
// 天气滚动条显示
static void scrollTxt(int pos)
{
clkb.createSprite(148, 24);
clkb.fillSprite(TFT_WHITE);
clkb.setTextWrap(false);
clkb.setTextDatum(CC_DATUM);
clkb.setTextColor(TFT_BLACK, TFT_WHITE);
clkb.drawString(scrollText[currentIndex], 74, pos + 12);
clkb.pushSprite(2, 4);
}
extern void tft_display_banner(void){
if (scrollText[currentIndex]){
clkb.setColorDepth(8);
clkb.loadFont(ZdyLwFont_20);
for (int pos = 24; pos > 0; pos--){
scrollTxt(pos);
}
clkb.deleteSprite();
clkb.unloadFont();
if (currentIndex >= 5){
currentIndex = 0; //回第一个
} else {
currentIndex += 1; //准备切换到下一个
}
}
}
2.4 睡眠模式
#define TFT_COMMAND_HWRESET 0x61 //tft command: HWRESET(61h): Hardeware Reset
#define TFT_COMMAND_SWRESET 0x01 //tft command: SWRESET(01h): Software Reset
#define TFT_COMMAND_SLPIN 0x10 //tft command: SLPIN(10h): Sleep In mode
#define TFT_COMMAND_DLPOFFSAVE 0xBD //tft command: DLPOFFSAVE (BDh): Display off power save
#define TFT_COMMANDDATA_DOFSAVE 0x00 //tft command data: Power save for display off mode. When DOFSAVE=0, power consumption in display off mode will be saved.
#define TFT_COMMAND_DELAY 10 //delay 10ms for next command
//打开显示
static void tft_display_reset(void){
tft.writecommand(TFT_COMMAND_HWRESET);//Hardeware Reset
delayMicroseconds(TFT_COMMAND_DELAY);
tft.writecommand(TFT_COMMAND_SWRESET);//Software Reset
delayMicroseconds(TFT_COMMAND_DELAY);
}
//关闭显示
static void tft_display_off(void){
tft.writecommand(TFT_COMMAND_SLPIN); //tft 设置为 Sleep In mode
delayMicroseconds(TFT_COMMAND_DELAY);
tft.writecommand(TFT_COMMAND_DLPOFFSAVE); //tft 设置为 Display off power save
delayMicroseconds(TFT_COMMAND_DELAY);
tft.writedata(TFT_COMMANDDATA_DOFSAVE);
delayMicroseconds(TFT_COMMAND_DELAY);
}
#define uS_TO_S_FACTOR 1000000 /* Conversion factor for micro seconds to seconds */
#define TIME_TO_SLEEP 5 /* Time ESP32 will go to sleep (in seconds) */
extern void print_wakeup_reason(){
esp_sleep_wakeup_cause_t wakeup_reason;
wakeup_reason = esp_sleep_get_wakeup_cause();
switch(wakeup_reason)
{
case ESP_SLEEP_WAKEUP_EXT0 : Serial.println("Wakeup caused by external signal using RTC_IO"); break;
case ESP_SLEEP_WAKEUP_EXT1 : Serial.println("Wakeup caused by external signal using RTC_CNTL"); break;
case ESP_SLEEP_WAKEUP_TIMER : Serial.println("Wakeup caused by timer"); break;
case ESP_SLEEP_WAKEUP_TOUCHPAD : Serial.println("Wakeup caused by touchpad"); break;
case ESP_SLEEP_WAKEUP_ULP : Serial.println("Wakeup caused by ULP program"); break;
default : Serial.printf("Wakeup was not caused by deep sleep: %d\n",wakeup_reason); break;
}
}
// 系统休眠
extern void esp_sleep(unsigned int minutes){
tft_display_off(); //关闭显示
if (minutes > 70) minutes = 70;
uint32_t timeOut = minutes * 60 * 1000000;
Serial.println(timeOut);
esp_sleep_enable_timer_wakeup(timeOut);// 定时时间,单位μ秒, 类型uint64_t, 所以定时时间要在584942年以内
Serial.println("进入睡眠模式");
Serial.print("时间睡眠（分钟）：");
Serial.println(minutes);
esp_deep_sleep_start();
}
RTC_DATA_ATTR int RTC_sleep_count_night = 0; // 20-8点不更新
//夜间休眠, 0-自动，1-立即
extern void sleep_at_night(unsigned int type){
//立即休眠
if (type == 1){
Serial.println("need sleep");
RTC_sleep_count_night = 1;
esp_sleep(SLEEP_TIME_NIGHT);
return;
}
//自动判断是否休眠
Serial.printf("RTC_sleep_count_night: %d\n", RTC_sleep_count_night);
// 继续休眠
if (RTC_sleep_count_night < SLEEP_COUNT_NIGHT_MAX){
Serial.println("auto sleep");
++RTC_sleep_count_night;
esp_sleep(SLEEP_TIME_NIGHT);
return;
}
Serial.println("weak up");
//不休眠则点亮屏幕
tft_display_reset();
}
2.5 获取天气信息
//获取城市代码
extern void getCityCode(void)
{
String URL = "http://wgeo.weather.com.cn/ip/?_=" + String(now());
//创建 HTTPClient 对象
HTTPClient httpClient;
//配置请求地址。此处也可以不使用端口号和PATH而单纯的
httpClient.begin(URL);
//设置请求头中的User-Agent
httpClient.setUserAgent("Mozilla/5.0 (iPhone; CPU iPhone OS 11_0 like Mac OS X) AppleWebKit/604.1.38 (KHTML, like Gecko) Version/11.0 Mobile/15A372 Safari/604.1");
// 不加这一句拿不到对应编号 感觉这里是特意处理了 不建议一直调用
httpClient.addHeader("Referer", "http://www.weather.com.cn/");
//启动连接并发送HTTP请求
int httpCode = httpClient.GET();
Serial.print("Send GET request to URL: ");
Serial.println(URL);
//如果服务器响应OK则从服务器获取响应体信息并通过串口输出
if (httpCode == HTTP_CODE_OK){
String str = httpClient.getString();
Serial.print("Get Response: ");
Serial.println(str);
int aa = str.indexOf("id=");
if (aa > -1){
//cityCode = str.substring(aa+4,aa+4+9).toInt();
cityCode = str.substring(aa + 4, aa + 4 + 9);
Serial.println(cityCode);
}else{
Serial.println("获取城市代码失败");
}
} else {
Serial.println("请求城市代码错误：");
Serial.println(httpCode);
}
//关闭与服务器连接
httpClient.end();
}
// 获取城市天气
extern void getCityWeather(void){
String URL = "http://d1.weather.com.cn/weather_index/" + cityCode + ".html?_=" + String(now());
//创建 HTTPClient 对象
HTTPClient httpClient;
httpClient.begin(URL);
//设置请求头中的User-Agent
httpClient.setUserAgent("Mozilla/5.0 (iPhone; CPU iPhone OS 11_0 like Mac OS X) AppleWebKit/604.1.38 (KHTML, like Gecko) Version/11.0 Mobile/15A372 Safari/604.1");
httpClient.addHeader("Referer", "http://www.weather.com.cn/");
//启动连接并发送HTTP请求
int httpCode = httpClient.GET();
Serial.println("正在获取天气数据");
Serial.println(URL);
//如果服务器响应OK则从服务器获取响应体信息并通过串口输出
if (httpCode == HTTP_CODE_OK){
String str = httpClient.getString();
int indexStart = str.indexOf("weatherinfo\":");
int indexEnd = str.indexOf("};var alarmDZ");
String jsonCityDZ = str.substring(indexStart + 13, indexEnd);
Serial.println(jsonCityDZ);
indexStart = str.indexOf("dataSK =");
indexEnd = str.indexOf(";var dataZS");
String jsonDataSK = str.substring(indexStart + 8, indexEnd);
Serial.println(jsonDataSK);
indexStart = str.indexOf("\"f\":[");
indexEnd = str.indexOf(",{\"fa");
String jsonFC = str.substring(indexStart + 5, indexEnd);
Serial.println(jsonFC);
tft_display_weather(&jsonCityDZ, &jsonDataSK, &jsonFC);
Serial.println("获取成功");
}else{
Serial.println("请求城市天气错误：");
Serial.print(httpCode);
}
//关闭与服务器连接
httpClient.end();
}