南棱笑笑生

20231218给Firefly的AIO-3399J【RK3399】开发板刷Android12挖掘机方案

20231218给Firefly的AIO-3399J【RK3399】开发板刷Android12挖掘机方案
2023/12/18 21:07

一、整体编译Rockchip的的Android12的挖掘机方案！
由于RK3399的Android12系统默认是IND工业方案，需要修改一下【为挖掘机方案】。

Z:\3TB\81rk_android12_220722\device\rockchip\rk3399\rk3399_Android12\BoardConfig.mk
include device/rockchip/rk3399/BoardConfig.mk

BOARD_SENSOR_ST := true
BOARD_SENSOR_COMPASS_AK8963-64 := true
BOARD_SENSOR_MPU_PAD := false
BOARD_COMPASS_SENSOR_SUPPORT := true
BOARD_GYROSCOPE_SENSOR_SUPPORT := true
CAMERA_SUPPORT_AUTOFOCUS:= false

BOARD_CAMERA_SUPPORT := true
BOARD_CAMERA_SUPPORT_EXT := true
PRODUCT_KERNEL_DTS := rk3399-evb-ind-lpddr4-android-avb

修改为：
include device/rockchip/rk3399/BoardConfig.mk

BOARD_CAMERA_SUPPORT := true
BOARD_CAMERA_SUPPORT_EXT := true
#PRODUCT_KERNEL_DTS := rk3399-evb-ind-lpddr4-android-avb
#PRODUCT_KERNEL_DTS := rk3399-firefly-aio
PRODUCT_KERNEL_DTS := rk3399-sapphire-excavator-edp-avb

rootroot@rootroot-X99-Turbo:~/3TB$
rootroot@rootroot-X99-Turbo:~/3TB$ tar --use-compress-program=pigz -xvpf rk356x_android12_220722.tgz
rootroot@rootroot-X99-Turbo:~/3TB$ mv rk_android12_220722 81rk_android12_220722
rootroot@rootroot-X99-Turbo:~/3TB$ cd 81rk_android12_220722
rootroot@rootroot-X99-Turbo:~/3TB/81rk_android12_220722$
rootroot@rootroot-X99-Turbo:~/3TB/81rk_android12_220722$ source build/envsetup.sh
rootroot@rootroot-X99-Turbo:~/3TB/81rk_android12_220722$
rootroot@rootroot-X99-Turbo:~/3TB/81rk_android12_220722$ lunch

You're building on Linux

Lunch menu... pick a combo:
1. PX30_Android12-user
2. PX30_Android12-userdebug
3. aosp_arm-eng
4. aosp_arm64-eng
5. aosp_blueline-userdebug
6. aosp_blueline_car-userdebug
7. aosp_bonito-userdebug
8. aosp_bonito_car-userdebug
9. aosp_bramble_car-userdebug
10. aosp_cf_arm64_auto-userdebug
11. aosp_cf_arm64_phone-userdebug
12. aosp_cf_x86_64_foldable-userdebug
13. aosp_cf_x86_64_pc-userdebug
14. aosp_cf_x86_64_phone-userdebug
15. aosp_cf_x86_64_tv-userdebug
16. aosp_cf_x86_auto-userdebug
17. aosp_cf_x86_phone-userdebug
18. aosp_cf_x86_tv-userdebug
19. aosp_coral_car-userdebug
20. aosp_crosshatch-userdebug
21. aosp_crosshatch_car-userdebug
22. aosp_crosshatch_vf-userdebug
23. aosp_flame_car-userdebug
24. aosp_oriole_car-userdebug
25. aosp_raven_car-userdebug
26. aosp_redfin_car-userdebug
27. aosp_sargo-userdebug
28. aosp_sargo_car-userdebug
29. aosp_sunfish_car-userdebug
30. aosp_x86-eng
31. aosp_x86_64-eng
32. arm_krait-eng
33. arm_v7_v8-eng
34. armv8-eng
35. armv8_cortex_a55-eng
36. armv8_kryo385-eng
37. beagle_x15-userdebug
38. beagle_x15_auto-userdebug
39. fuchsia_arm64-eng
40. fuchsia_x86_64-eng
41. hikey-userdebug
42. hikey64_only-userdebug
43. hikey960-userdebug
44. hikey960_tv-userdebug
45. hikey_tv-userdebug
46. qemu_trusty_arm64-userdebug
47. rk3326_pie-user
48. rk3326_pie-userdebug
49. rk3326_q-user
50. rk3326_q-userdebug
51. rk3326_r-user
52. rk3326_r-userdebug
53. rk3326_s-user
54. rk3326_s-userdebug
55. rk3326_sgo-user
56. rk3326_sgo-userdebug
57. rk3399_Android10-user
58. rk3399_Android10-userdebug
59. rk3399_Android11-user
60. rk3399_Android11-userdebug
61. rk3399_Android12-user
62. rk3399_Android12-userdebug
63. rk3399_mid-user
64. rk3399_mid-userdebug
65. rk3566_32bit-user
66. rk3566_32bit-userdebug
67. rk3566_eink-user
68. rk3566_eink-userdebug
69. rk3566_einkw6-user
70. rk3566_einkw6-userdebug
71. rk3566_r-user
72. rk3566_r-userdebug
73. rk3566_s-user
74. rk3566_s-userdebug
75. rk3566_sgo-user
76. rk3566_sgo-userdebug
77. rk3568_s-user
78. rk3568_s-userdebug
79. sdk_car_arm-userdebug
80. sdk_car_arm64-userdebug
81. sdk_car_portrait_x86_64-userdebug
82. sdk_car_x86-userdebug
83. sdk_car_x86_64-userdebug
84. silvermont-eng
85. uml-userdebug
86. yukawa-userdebug
87. yukawa_sei510-userdebug

Which would you like? [aosp_arm-eng] 62

============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=12
TARGET_PRODUCT=rk3399_Android12
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=cortex-a53
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a15
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-5.15.0-91-generic-x86_64-Ubuntu-20.04.6-LTS
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=SP2A.220305.012
OUT_DIR=out
============================================
rootroot@rootroot-X99-Turbo:~/3TB/81rk_android12_220722$
rootroot@rootroot-X99-Turbo:~/3TB/81rk_android12_220722$
rootroot@rootroot-X99-Turbo:~/3TB/81rk_android12_220722$ ll
total 224
drwxrwxr-x 38 rootroot rootroot 4096 12月 18 16:37 ./
drwxrwxrwx 7 rootroot rootroot 4096 12月 18 16:35 ../
lrwxrwxrwx 1 rootroot rootroot 19 3月 4 2022 Android.bp -> build/soong/root.bp
drwxrwxr-x 36 rootroot rootroot 4096 3月 4 2022 art/
drwxrwxr-x 15 rootroot rootroot 4096 3月 4 2022 bionic/
drwxrwxr-x 4 rootroot rootroot 4096 3月 4 2022 bootable/
lrwxrwxrwx 1 rootroot rootroot 26 3月 4 2022 bootstrap.bash -> build/soong/bootstrap.bash*
drwxrwxr-x 7 rootroot rootroot 4096 3月 4 2022 build/
lrwxrwxrwx 1 rootroot rootroot 23 3月 4 2022 BUILD -> build/bazel/bazel.BUILD
-rwxrwxrwx 1 rootroot rootroot 9024 12月 18 16:36 build.sh*
-r-xr-xr-x 1 rootroot rootroot 14109 3月 4 2022 .classpath*
drwxrwxr-x 3 rootroot rootroot 4096 3月 4 2022 compatibility/
drwxrwxr-x 14 rootroot rootroot 4096 6月 24 2022 cts/
drwxrwxr-x 8 rootroot rootroot 4096 3月 4 2022 dalvik/
drwxrwxr-x 5 rootroot rootroot 4096 3月 4 2022 developers/
drwxrwxr-x 20 rootroot rootroot 4096 6月 24 2022 development/
drwxrwxr-x 11 rootroot rootroot 4096 3月 4 2022 device/
drwxrwxr-x 357 rootroot rootroot 12288 6月 24 2022 external/
drwxrwxr-x 16 rootroot rootroot 4096 3月 4 2022 frameworks/
drwxrwxr-x 17 rootroot rootroot 4096 3月 4 2022 hardware/
-r--r--r-- 1 rootroot rootroot 162 3月 4 2022 javaenv.sh
drwxrwxr-x 5 rootroot rootroot 4096 3月 4 2022 kernel/
drwxrwxr-x 27 rootroot rootroot 4096 6月 24 2022 kernel-4.19/
drwxrwxr-x 3 rootroot rootroot 4096 3月 4 2022 kernel-5.10/
drwxrwxr-x 20 rootroot rootroot 4096 3月 4 2022 libcore/
drwxrwxr-x 10 rootroot rootroot 4096 3月 4 2022 libnativehelper/
-r--r--r-- 1 rootroot rootroot 92 3月 4 2022 Makefile
drwxrwxr-x 11 rootroot rootroot 4096 3月 4 2022 mkcombinedroot/
-r-xr-xr-x 1 rootroot rootroot 10151 3月 4 2022 mkimage_ab.sh*
-r-xr-xr-x 1 rootroot rootroot 8544 3月 4 2022 mkimage.sh*
drwxrwxr-x 6 rootroot rootroot 4096 12月 18 16:37 out/
drwxrwxr-x 9 rootroot rootroot 4096 3月 4 2022 packages/
drwxrwxr-x 6 rootroot rootroot 4096 3月 4 2022 pdk/
drwxrwxr-x 10 rootroot rootroot 4096 3月 4 2022 platform_testing/
drwxrwxr-x 34 rootroot rootroot 4096 6月 24 2022 prebuilts/
drwxrwxr-x 7 rootroot rootroot 4096 11月 4 2021 .repo/
-r-xr-xr-x 1 rootroot rootroot 519 3月 4 2022 restore_patches.sh*
drwxrwxr-x 9 rootroot rootroot 4096 3月 4 2022 rkbin/
drwxrwxr-x 4 rootroot rootroot 4096 3月 4 2022 RKDocs/
drwxrwxr-x 5 rootroot rootroot 4096 3月 4 2022 rkst/
drwxrwxr-x 5 rootroot rootroot 4096 3月 4 2022 RKTools/
drwxrwxr-x 22 rootroot rootroot 4096 3月 4 2022 sdk/
drwxrwxr-x 45 rootroot rootroot 4096 3月 4 2022 system/
drwxrwxr-x 11 rootroot rootroot 4096 3月 4 2022 test/
drwxrwxr-x 4 rootroot rootroot 4096 3月 4 2022 toolchain/
drwxrwxr-x 23 rootroot rootroot 4096 3月 4 2022 tools/
drwxrwxr-x 25 rootroot rootroot 4096 6月 24 2022 u-boot/
drwxrwxr-x 4 rootroot rootroot 4096 3月 4 2022 vendor/
lrwxrwxrwx 1 rootroot rootroot 27 3月 4 2022 WORKSPACE -> build/bazel/bazel.WORKSPACE
rootroot@rootroot-X99-Turbo:~/3TB/81rk_android12_220722$
rootroot@rootroot-X99-Turbo:~/3TB/81rk_android12_220722$
rootroot@rootroot-X99-Turbo:~/3TB/81rk_android12_220722$ ./build.sh -UACKu
will build u-boot
will build android
will build kernel with Clang
will build kernel
will build update.img
-------------------KERNEL_VERSION:4.19
-------------------KERNEL_DTS:rk3399-sapphire-excavator-edp-avb

#### build completed successfully (1 seconds) ####

#### build completed successfully (2 seconds) ####

grep: .config: No such file or directory
## make rk3399_defconfig -j72
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c

frameworks/base/packages/SystemUI/src/com/android/systemui/statusbar/policy/DeviceControlsControllerImpl.kt:94:51: warning: 'CONTROLS_ENABLED: String' is deprecated. Deprecated in Java
if (secureSettings.getInt(Settings.Secure.CONTROLS_ENABLED, 1) == 0) {
^
frameworks/base/packages/SystemUI/src/com/android/systemui/statusbar/tv/VpnStatusObserver.kt:43:24: warning: 'get(Class!): T!' is deprecated. Deprecated in Java
Dependency.get(SecurityController::class.java)
^
frameworks/base/packages/SystemUI/src/com/android/systemui/util/kotlin/nullability.kt:29:1: warning: expected performance impact from inlining is insignificant. Inlining works best for functions with parameters of functional types
inline fun Optional.getOrNull(): T? = orElse(null)
^
[ 99% 130386/130406] //frameworks/base/packages/SystemUI:SystemUI r8 [common]
Warning: Missing class android.compat.annotation.UnsupportedAppUsage (referenced from: void com.android.systemui.people.widget.PeopleBackupHelper.writeNewStateDescription(android.os.ParcelFileDescriptor))
Missing class android.support.annotation.Keep (referenced from: kotlinx.coroutines.android.AndroidExceptionPreHandler)
Missing class org.jetbrains.annotations.NotNull (referenced from: java.util.List com.android.keyguard.FontInterpolator$VarFontKey.sortedAxes and 4935 other contexts)
Missing class org.jetbrains.annotations.Nullable (referenced from: android.graphics.fonts.Font com.android.keyguard.FontInterpolator$InterpKey.l and 1143 other contexts)
[100% 130406/130406] Target super fs image for debug: out/target/product/rk3399_Android12/super.img
2023-12-18 18:26:51 - build_super_image.py - INFO : Building super image from info dict...
2023-12-18 18:26:51 - sparse_img.py - INFO : Total of 235295 4096-byte output blocks in 18 input chunks.
2023-12-18 18:26:51 - sparse_img.py - INFO : Total of 37257 4096-byte output blocks in 6 input chunks.
2023-12-18 18:26:51 - sparse_img.py - INFO : Total of 54007 4096-byte output blocks in 7 input chunks.
2023-12-18 18:26:51 - sparse_img.py - INFO : Total of 4303 4096-byte output blocks in 2 input chunks.
2023-12-18 18:26:51 - sparse_img.py - INFO : Total of 168 4096-byte output blocks in 2 input chunks.
2023-12-18 18:26:51 - sparse_img.py - INFO : Total of 64 4096-byte output blocks in 4 input chunks.
2023-12-18 18:26:51 - sparse_img.py - INFO : Total of 61210 4096-byte output blocks in 5 input chunks.
2023-12-18 18:26:57 - build_super_image.py - INFO : Done writing image out/target/product/rk3399_Android12/super.img

#### build completed successfully (01:45:17 (hh:mm:ss)) ####

Build android ok!
make and copy android images
TARGET_PRODUCT=rk3399_Android12
TARGET_BASE_PARAMETER_IMAGE==device/rockchip/common/baseparameter/v1.0/baseparameter.img
HIGH_RELIABLE_RECOVERY_OTA=
BOARD_AVB_ENABLE=false
system filesysystem is ext4
create dtbo.img...
done.
create rockdev/Image-rk3399_Android12/resource.img...
done.
create rockdev/Image-rk3399_Android12/boot.img...
done.
create rockdev/Image-rk3399_Android12/boot-debug.img...
done.
skip copy images: /home/rootroot/3TB/81rk_android12_220722/out/target/product/rk3399_Android12/vendor_boot.img
skip copy images: /home/rootroot/3TB/81rk_android12_220722/out/target/product/rk3399_Android12/vendor_boot-debug.img
create rockdev/Image-rk3399_Android12/recovery.img...
done.
create rockdev/Image-rk3399_Android12/super.img...
done.
skip copy images: /home/rootroot/3TB/81rk_android12_220722/out/target/product/rk3399_Android12/userdata.img
create vbmeta.img...
BOARD_AVB_ENABLE is false, use default vbmeta.img
create misc.img.... done.
create uboot.img...
create trust.img...
create loader...
create config.cfg...
create baseparameter...done.
Make image ok!
Make update.img
packing update.img with Image -RK330C
regenernate package-file-tmp...
start to make update.img...
Android Firmware Package Tool v2.0
------ PACKAGE ------
Add file: ./package-file
package-file,Add file: ./package-file done,offset=0x800,size=0x2b0,userspace=0x1
Add file: ./Image/MiniLoaderAll.bin
bootloader,Add file: ./Image/MiniLoaderAll.bin done,offset=0x1000,size=0x7194e,userspace=0xe4
Add file: ./Image/parameter.txt
parameter,Add file: ./Image/parameter.txt done,offset=0x73000,size=0x292,userspace=0x1
Add file: ./Image/uboot.img
uboot,Add file: ./Image/uboot.img done,offset=0x73800,size=0x400000,userspace=0x800
Add file: ./Image/trust.img
trust,Add file: ./Image/trust.img done,offset=0x473800,size=0x400000,userspace=0x800
Add file: ./Image/misc.img
misc,Add file: ./Image/misc.img done,offset=0x873800,size=0xc000,userspace=0x18
Add file: ./Image/dtbo.img
dtbo,Add file: ./Image/dtbo.img done,offset=0x87f800,size=0x25f,userspace=0x1
Add file: ./Image/vbmeta.img
vbmeta,Add file: ./Image/vbmeta.img done,offset=0x880000,size=0x1000,userspace=0x2
Add file: ./Image/boot.img
boot,Add file: ./Image/boot.img done,offset=0x881000,size=0x1d64800,userspace=0x3ac9
Add file: ./Image/recovery.img
recovery,Add file: ./Image/recovery.img done,offset=0x25e5800,size=0x5f7f800,userspace=0xbeff
Add file: ./Image/baseparameter.img
baseparameter,Add file: ./Image/baseparameter.img done,offset=0x8565000,size=0x100000,userspace=0x200
Add file: ./Image/super.img
super,Add file: ./Image/super.img done,offset=0x8665000,size=0x5ebe2488,userspace=0xbd7c5
Add CRC...
Make firmware OK!
------ OK ------
********rkImageMaker ver 2.0********
Generating new image, please wait...
Writing head info...
Writing boot file...
Writing firmware...
Generating MD5 data...
MD5 data generated successfully!
New image generated successfully!
Making update.img OK.
Make update image ok!
/home/rootroot/3TB/81rk_android12_220722
rootroot@rootroot-X99-Turbo:~/3TB/81rk_android12_220722$ ll

二、LOG1原始：

U-Boot 2017.09-dirty #rootroot (Dec 18 2023 - 16:38:28 +0800)

Model: Rockchip RK3399 Evaluation Board
PreSerial: 2, raw, 0xff1a0000
DRAM: 2 GiB
Sysmem: init
Relocation Offset: 7db74000
Relocation fdt: 7bd682c0 - 7bd6acdb
CR: M/C/I
Using default environment

DM: v1
dwmmc@fe320000: 1, sdhci@fe330000: 0
Bootdev(atags): mmc 0
MMC0: HS400, 150Mhz
PartType: EFI
boot mode: recovery (misc)
Android 12.0, Build 2022.3, v2
Found DTB in recovery part
DTB: rk-kernel.dtb
HASH(c): OK
ANDROID: fdt overlay OK
I2c0 speed: 400000Hz
PMIC: RK808
vdd_center 900000 uV
vdd_cpu_l 900000 uV
vdd_log 1100000 uV
warning: bad baseparameter
Model: Rockchip RK3399 Excavator Board edp avb (Android)
Rockchip UBOOT DRM driver version: v1.0.1
xfer: num: 2, addr: 0x50
xfer: num: 2, addr: 0x50
Monitor has basic audio support
hdmi info isn't saved in main block
mode:1920x1080
hdmi@ff940000: detailed mode clock 148500 kHz, flags[5]
H: 1920 2008 2052 2200
V: 1080 1084 1089 1125
bus_format: 2025
CEA mode used vic=16
final pixclk = 148500000 tmdsclk = 148500000
PHY powered down in 0 iterations
PHY PLL locked 1 iterations
PHY powered down in 0 iterations
PHY PLL locked 1 iterations
sink has audio support
hdmi_set_clk_regenerator: fs=48000Hz ftdms=148.500MHz N=6144 cts=148500
Using display timing dts
edp@ff970000: detailed mode clock 200000 kHz, flags[a]
H: 1536 1548 1564 1612
V: 2048 2056 2060 2068
bus_format: 100e
AUX CH command reply failed!
AUX CH error happens: 2
AUX CH command reply failed!
failed to read dpcd caps: -110
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
aplll 816000 KHz
apllb 816000 KHz
dpll 856000 KHz
cpll 200000 KHz
gpll 800000 KHz
npll 600000 KHz
vpll 148000 KHz
aclk_perihp 133333 KHz
hclk_perihp 66666 KHz
pclk_perihp 33333 KHz
aclk_perilp0 266666 KHz
hclk_perilp0 88888 KHz
pclk_perilp0 44444 KHz
hclk_perilp1 100000 KHz
pclk_perilp1 50000 KHz
Net: eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'): 0
ANDROID: reboot reason: "recovery"
optee api revision: 2.0
TEEC: Reset area[0] info...
TEEC: Reset area[1] info...
Vboot=0, AVB images, AVB verify
General failure
INF [0x0] TEE-CORE:tee_rpmb_init:1217: RPMB INIT: Verify key failed. Try again.

ERR [0x0] TEE-CORE:tee_rpmb_init:1225: ERROR: Verify RPMB authentication key failed!

General failure
INF [0x0] TEE-CORE:tee_rpmb_init:1217: RPMB INIT: Verify key failed. Try again.

ERR [0x0] TEE-CORE:tee_rpmb_init:1225: ERROR: Verify RPMB authentication key failed!

General failure
INF [0x0] TEE-CORE:tee_rpmb_init:1217: RPMB INIT: Verify key failed. Try again.

ERR [0x0] TEE-CORE:tee_rpmb_init:1225: ERROR: Verify RPMB authentication key failed!

General failure
INF [0x0] TEE-CORE:tee_rpmb_init:1217: RPMB INIT: Verify key failed. Try again.

ERR [0x0] TEE-CORE:tee_rpmb_init:1225: ERROR: Verify RPMB authentication key failed!

lib/avb/libavb_user/avb_ops_user.c: init lock state error
Error determining whether device is unlocked.
read_is_device_unlocked() ops returned that device is UNLOCKED
Magic is incorrect.
Error validating A/B metadata from disk. Resetting and writing new A/B metadata to disk.
avb_footer.c:41: ERROR: Footer magic is incorrect.
avb_vbmeta_image.c:65: ERROR: Magic is incorrect.
avb_slot_verify.c:773: ERROR: recovery: Error verifying vbmeta image: invalid vbmeta header
Verify recovery with vbmeta.
avb_slot_verify.c:762: ERROR: vbmeta: Error verifying vbmeta image: OK_NOT_SIGNED
General failure
INF [0x0] TEE-CORE:tee_rpmb_init:1217: RPMB INIT: Verify key failed. Try again.

ERR [0x0] TEE-CORE:tee_rpmb_init:1225: ERROR: Verify RPMB authentication key failed!

General failure
INF [0x0] TEE-CORE:tee_rpmb_init:1217: RPMB INIT: Verify key failed. Try again.

ERR [0x0] TEE-CORE:tee_rpmb_init:1225: ERROR: Verify RPMB authentication key failed!

General failure
INF [0x0] TEE-CORE:tee_rpmb_init:1217: RPMB INIT: Verify key failed. Try again.

ERR [0x0] TEE-CORE:tee_rpmb_init:1225: ERROR: Verify RPMB authentication key failed!

General failure
INF [0x0] TEE-CORE:tee_rpmb_init:1217: RPMB INIT: Verify key failed. Try again.

ERR [0x0] TEE-CORE:tee_rpmb_init:1225: ERROR: Verify RPMB authentication key failed!

lib/avb/libavb_user/avb_ops_user.c: init rollback index error
avb_slot_verify.c:883: ERROR: vbmeta: Error getting rollback index for location.
AVB verify failed
Android boot failed, error -1.
Unknown command 'boot_fit' - try 'help'

## Booting Rockchip Format Image
Could not find kernel partition, ret=-1
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc0(part 0) is current device
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus usb@fe3a0000: USB OHCI 1.0
Bus usb@fe3c0000: USB EHCI 1.00
Bus usb@fe3e0000: USB OHCI 1.0
Bus dwc3@fe800000: probe failed, error -2
Bus dwc3@fe900000: usb maximum-speed not found
Rockchip Type-C PHY is initialized
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found
scanning bus usb@fe3c0000 for devices... WARN: interface 0 has 2 endpoint descriptor, different from the interface descriptor's value: 1
2 USB Device(s) found
scanning bus usb@fe3e0000 for devices... 1 USB Device(s) found
scanning bus dwc3@fe900000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/01-0a-2b-aa-3b-0e-5d
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000000
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-rockchip
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
Config file not found
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
=>

三、直接用Firefly AIO-3399J的Android10的SDK里面的uboot替换之后，重新打包，LOG：

就会碰到5秒钟之后重启。初步判断是uboot/kernel之间的版本不匹配，内核自动重启了！

U-Boot 2017.09 (Dec 18 2023 - 18:31:20 +0800)

Model: Rockchip RK3399 Evaluation Board
PreSerial: 2, raw, 0xff1a0000
DRAM: 2 GiB
Sysmem: init
Relocation Offset: 7db7a000
Relocation fdt: 7bd6e2d0 - 7bd70ceb
CR: M/C/I
Using default environment

dwmmc@fe320000: 1, sdhci@fe330000: 0
Bootdev(atags): mmc 0
MMC0: HS400, 150Mhz
PartType: EFI
boot mode: normal
Android 12.0, Build 2022.3, v2
Found DTB in boot part
DTB: rk-kernel.dtb
HASH(c): OK
ANDROID: fdt overlay OK
I2c0 speed: 400000Hz
PMIC: RK808
vdd_center 900000 uV
vdd_cpu_l 1125000 uV
vdd_log 1100000 uV
warning: bad baseparameter
Model: Rockchip RK3399 Excavator Board edp avb (Android)
no key node
Rockchip UBOOT DRM driver version: v1.0.1
xfer: num: 2, addr: 0x50
xfer: num: 2, addr: 0x50
Monitor has basic audio support
hdmi info isn't saved in main block
mode:1920x1080
Detailed mode clock 148500 kHz, flags[5]
H: 1920 2008 2052 2200
V: 1080 1084 1089 1125
bus_format: 2025
CEA mode used vic=16
final pixclk = 148500000 tmdsclk = 148500000
PHY powered down in 0 iterations
PHY PLL locked 1 iterations
PHY powered down in 0 iterations
PHY PLL locked 1 iterations
sink has audio support
hdmi_set_clk_regenerator: fs=48000Hz ftdms=148.500MHz N=6144 cts=148500
Using display timing dts
Detailed mode clock 200000 kHz, flags[a]
H: 1536 1548 1564 1612
V: 2048 2056 2060 2068
bus_format: 100e
AUX CH command reply failed!
AUX CH error happens: 2
AUX CH command reply failed!
AUX CH error happens: 2
AUX CH command reply failed!
AUX CH error happens: 2
failed to get Rx Max Link Rate
failed to init training
unable to do link train
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
aplll 816000 KHz
apllb 816000 KHz
dpll 856000 KHz
cpll 200000 KHz
gpll 800000 KHz
npll 600000 KHz
vpll 148000 KHz
aclk_perihp 133333 KHz
hclk_perihp 66666 KHz
pclk_perihp 33333 KHz
aclk_perilp0 266666 KHz
hclk_perilp0 88888 KHz
pclk_perilp0 44444 KHz
hclk_perilp1 100000 KHz
pclk_perilp1 50000 KHz
Net: eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'): 0
emmc boot
No FDT memory address configured. Default at 0x08300000
libfdt fdt_getprop(): FDT_ERR_NOTFOUND
lzf debug,store_value=Rockchip RK3399 Excavator Board edp avb (Android)
ANDROID: reboot reason: "(none)"
optee api revision: 2.0
Vboot=0, AVB images, AVB verify
read_is_device_unlocked() ops returned that device is UNLOCKED
avb_slot_verify.c:762: ERROR: vbmeta: Error verifying vbmeta image: OK_NOT_SIGNED
get image from preloaded partition...
Could not find "system" partition
Booting IMAGE kernel at 0x00280000 with fdt at 0x08300000...

Fdt Ramdisk skip relocation
## Booting Android Image at 0x0027f800 ...
Kernel load addr 0x00280000 size 28461 KiB
RAM disk load addr 0x0a200000 size 1334 KiB
## Flattened Device Tree blob at 0x08300000
Booting using the fdt blob at 0x08300000
XIP Kernel Image from 0x00280000 to 0x00280000 ... OK
'reserved-memory' ramoops@110000: addr=110000 size=f0000
Using Device Tree in place at 0000000008300000, end 000000000831d956
failed to reserve drm-cubic-lut memory
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0x80000000 (size: 0x75e00000)
Total: 1201.660 ms

Starting kernel ...

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 4.19.232 (rootroot@rootroot-X99-Turbo) (Android (7284624, based on r416183b) clang version 12.0.5 (https://android.googlesource.com/toolchain/llvm-project c935d99d7cf2016289302412d708641d52d2f7ee), LLD 12.0.5 (/buildbot/src/android/llvm-toolchain/out/llvm-project/lld c935d99d7cf2016289302412d708641d52d2f7ee)) #1 SMP PREEMPT Mon Dec 18 16:39:18 CST 2023
[ 0.000000] Machine model: Rockchip RK3399 Excavator Board edp avb (Android)
[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
[ 0.000000] bootconsole [uart8250] enabled
[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'stb-devinfo@00000000': base 0x0000000000000000, size 0 MiB
[ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 24 pages/cpu s58840 r8192 d31272 u98304
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 507912
[ 0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal androidboot.dtb_idx=0 androidboot.dtbo_idx=0 androidboot.verifiedbootstate=orange androidboot.slot_suffix= androidboot.serialno=62089c75a9d193d6 console=ttyFIQ0 firmware_class.path=/vendor/etc/firmware init=/init rootwait ro loop.max_part=7 androidboot.console=ttyFIQ0 androidboot.wificountrycode=CN androidboot.hardware=rk30board androidboot.boot_devices=fe330000.sdhci androidboot.selinux=permissive earlycon=uart8250,mmio32,0xff1a0000 androidboot.baseband=N/A androidboot.veritymode=enforcing coherent_pool=1m
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1978332K/2064384K available (15870K kernel code, 2094K rwdata, 9156K rodata, 1280K init, 949K bss, 69668K reserved, 16384K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu:    RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000]    Tasks RCU enabled.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @200000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GIC: using LPI property table @0x000000000a3f0000
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] CPU0: using LPI pending table @0x000000007e000000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] random: random: get_random_bytes called from start_kernel+0x22c/0x3d0 with crng_init=0
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001935] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 0.002849] pid_max: default: 32768 minimum: 301
[ 0.003382] Security Framework initialized
[ 0.003752] SELinux: Initializing.
[ 0.004165] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.004767] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.007016] ASID allocator initialised with 32768 entries
[ 0.007601] rcu: Hierarchical SRCU implementation.
[ 0.008459] Platform MSI: interrupt-controller@fee20000 domain created
[ 0.009571] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.011122] smp: Bringing up secondary CPUs ...
[ 0.012158] Detected VIPT I-cache on CPU1
[ 0.012193] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.012238] CPU1: using LPI pending table @0x000000007e190000
[ 0.012287] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.013134] Detected VIPT I-cache on CPU2
[ 0.013166] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.013212] CPU2: using LPI pending table @0x000000007e1e0000
[ 0.013260] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.014093] Detected VIPT I-cache on CPU3
[ 0.014125] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.014168] CPU3: using LPI pending table @0x000000007e210000
[ 0.014215] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.015061] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[ 0.015067] CPU features: enabling workaround for EL2 vector hardening
[ 0.015075] Detected PIPT I-cache on CPU4
[ 0.015099] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.015155] CPU4: using LPI pending table @0x000000007e260000
[ 0.015188] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[ 0.015902] Detected PIPT I-cache on CPU5
[ 0.015928] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.015983] CPU5: using LPI pending table @0x000000007e270000
[ 0.016016] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[ 0.016122] smp: Brought up 1 node, 6 CPUs
[ 0.027846] SMP: Total of 6 processors activated.
[ 0.028267] CPU features: detected: GIC system register CPU interface
[ 0.028838] CPU features: detected: 32-bit EL0 Support
[ 0.035513] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.036255] CPU: All CPU(s) started at EL2
[ 0.036668] alternatives: patching kernel code
[ 0.038622] devtmpfs: initialized
[ 0.052930] Registered cp15_barrier emulation handler
[ 0.052962] Trying to unpack rootfs image as initramfs...
[ 0.053938] Registered setend emulation handler
[ 0.054702] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.055651] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.056599] pinctrl core: initialized pinctrl subsystem
[ 0.057773] NET: Registered protocol family 16
[ 0.058562] schedtune: configured to support 6 boost groups
[ 0.059335] audit: initializing netlink subsys (disabled)
[ 0.063547] audit: type=2000 audit(0.059:1): state=initialized audit_enabled=0 res=1
[ 0.064377] cpuidle: using governor menu
[ 0.064765] Registered FIQ tty driver
[ 0.065332] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.070458] DMA: preallocated 1024 KiB pool for atomic allocations
[ 0.074755] console [pstore-1] enabled
[ 0.075254] pstore: Registered ramoops as persistent store backend
[ 0.075849] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[ 0.094152] rockchip-gpio ff720000.gpio0: probed gpio0 (ff720000.gpio0)
[ 0.095137] rockchip-gpio ff730000.gpio1: probed gpio1 (ff730000.gpio1)
[ 0.096104] rockchip-gpio ff780000.gpio2: probed gpio2 (ff780000.gpio2)
[ 0.097080] rockchip-gpio ff788000.gpio3: probed gpio3 (ff788000.gpio3)
[ 0.098041] rockchip-gpio ff790000.gpio4: probed gpio4 (ff790000.gpio4)
[ 0.098739] rockchip-pinctrl pinctrl: probed pinctrl
[ 0.110764] cryptd: max_cpu_qlen set to 1000
[ 0.112200] fiq debugger fiq mode enabled
[ 0.112829] console [ttyFIQ0] enabled
[ 0.113186] bootconsole [uart8250[ 0.112829] console [ttyFIQ0] enabled
[ 0.113186] bootconsole [u] disabled
art8250] disabled
[ 0.114297] Registered fiq debugger ttyFIQ0
[ 0.114824] reg-fixed-voltage vcc1v8-s3: Failed to register regulator: -517
[ 0.114971] reg-fixed-voltage vcc3v0-sd: Failed to register regulator: -517
[ 0.115048] reg-fixed-voltage vcc3v3-sys: Failed to register regulator: -517
[ 0.115113] vcc_sys: supplied by dc_12v
[ 0.115401] vcc5v0_host: supplied by vcc_sys
[ 0.115840] vcc_lcd: supplied by vcc5v0_sys
[ 0.118027] Freeing initrd memory: 1332K
[ 0.141553] rk_iommu ff650800.iommu: version = 1
[ 0.141947] rk_iommu ff660480.iommu: version = 1
[ 0.142201] rk_iommu ff670800.iommu: version = 1
[ 0.142470] rk_iommu ff8f3f00.iommu: version = 1
[ 0.142664] rk_iommu ff903f00.iommu: version = 1
[ 0.142863] rk_iommu ff914000.iommu: version = 1
[ 0.143119] rk_iommu ff924000.iommu: version = 1
[ 0.143619] SCSI subsystem initialized
[ 0.143791] usbcore: registered new interface driver usbfs
[ 0.143833] usbcore: registered new interface driver hub
[ 0.143876] usbcore: registered new device driver usb
[ 0.144113] media: Linux media interface: v0.10
[ 0.144145] videodev: Linux video capture interface: v2.00
[ 0.144201] pps_core: LinuxPPS API ver. 1 registered
[ 0.144215] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.144231] PTP clock support registered
[ 0.145990] Advanced Linux Sound Architecture Driver Initialized.
[ 0.146315] Bluetooth: Core ver 2.22
[ 0.146352] NET: Registered protocol family 31
[ 0.146366] Bluetooth: HCI device and connection manager initialized
[ 0.146382] Bluetooth: HCI socket layer initialized
[ 0.146398] Bluetooth: L2CAP socket layer initialized
[ 0.146439] Bluetooth: SCO socket layer initialized
[ 0.146839] rockchip-cpuinfo cpuinfo: SoC       : 0
[ 0.146857] rockchip-cpuinfo cpuinfo: Serial       : 62089c75a9d193d6
[ 0.147247] clocksource: Switched to clocksource arch_sys_counter
[ 0.207403] VFS: Disk quotas dquot_6.6.0
[ 0.207480] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.208675] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 0.208880] NET: Registered protocol family 2
[ 0.209050] IP idents hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.210207] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[ 0.210258] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.210399] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.210706] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.210816] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.210889] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.211034] NET: Registered protocol family 1
[ 0.212838] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.213123] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.214517] Initialise system trusted keyrings
[ 0.214670] workingset: timestamp_bits=45 max_order=19 bucket_order=0
[ 0.218687] utf8_selftest: All 154 tests passed
[ 0.218707] fuse init (API version 7.27)
[ 0.219777]
[ 0.219777] TEE Core Framework initialization (ver 1:0.1)
[ 0.219802] TEE armv7 Driver initialization
[ 0.220169] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[ 0.220188] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[ 0.220333] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[ 0.221444] Key type asymmetric registered
[ 0.221460] Asymmetric key parser 'x509' registered
[ 0.221495] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.221506] io scheduler noop registered
[ 0.221611] io scheduler cfq registered (default)
[ 0.221625] io scheduler mq-deadline registered
[ 0.221637] io scheduler kyber registered
[ 0.221712] io scheduler bfq registered
[ 0.223282] phy phy-ff770000.syscon:[email protected]: Linked as a consumer to regulator.6
[ 0.223662] phy phy-ff770000.syscon:[email protected]: No vbus specified for otg port
[ 0.225340] rockchip-mipi-dphy-rx ff770000.syscon:mipi-dphy-rx0: invalid resource
[ 0.228606] rockchip-pcie f8000000.pcie: missing "memory-region" property
[ 0.228735] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 0.228758] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[ 0.228778] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[ 0.228797] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[ 0.228826] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[ 0.228852] rockchip-pcie f8000000.pcie: MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[ 0.228870] rockchip-pcie f8000000.pcie: IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[ 0.780622] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[ 0.780644] rockchip-pcie f8000000.pcie: deferred probe failed
[ 0.780721] rockchip-pcie: probe of f8000000.pcie failed with error -110
[ 0.781343] pwm-backlight backlight: backlight supply power not found, using dummy regulator
[ 0.781405] pwm-backlight backlight: Linked as a consumer to regulator.0
[ 0.781694] iommu: Adding device ff670000.iep to group 2
[ 0.781721] iep ff670000.iep: Linked as a consumer to ff670800.iommu
[ 0.781883] iep: failed to find iep power down clock source.
[ 0.782190] iep: IEP Power ON
[ 0.782226] iep: IEP Power OFF
[ 0.782293] iep: IEP Driver loaded succesfully
[ 0.782456] iep: Module initialized.
[ 0.782576] mpp_service mpp-srv: 4b382d7e3f50 author: Herman Chen 2021-11-26 video: rockchip: mpp: rkvdec2: setup link mode clk
[ 0.782586] mpp_service mpp-srv: probe start
[ 0.782903] iommu: Adding device ff660000.rkvdec to group 1
[ 0.782929] mpp_rkvdec ff660000.rkvdec: Linked as a consumer to ff660480.iommu
[ 0.783102] mpp_rkvdec ff660000.rkvdec: probing start
[ 0.783417] rkvdec_init:1222: failed on clk_get clk_hevc_cabac
[ 0.783479] mpp_rkvdec ff660000.rkvdec: shared_video_hevc_cabac is not found!
[ 0.783492] rkvdec_init:1253: No hevc cabac reset resource define
[ 0.783664] mpp_rkvdec ff660000.rkvdec: probing finish
[ 0.784613] iommu: Adding device ff650400.vdpu to group 0
[ 0.784640] mpp_vdpu2 ff650400.vdpu: Linked as a consumer to ff650800.iommu
[ 0.784806] mpp_vdpu2 ff650400.vdpu: probe device
[ 0.785107] mpp_vdpu2 ff650400.vdpu: reset_group->rw_sem_on=0
[ 0.785129] mpp_vdpu2 ff650400.vdpu: reset_group->rw_sem_on=0
[ 0.785249] mpp_vdpu2 ff650400.vdpu: probing finish
[ 0.785587] iommu: Adding device ff650000.vepu to group 0
[ 0.785611] mpp_vepu2 ff650000.vepu: Linked as a consumer to ff650800.iommu
[ 0.785652] mpp_vepu2 ff650000.vepu: probe device
[ 0.785908] mpp_vepu2 ff650000.vepu: reset_group->rw_sem_on=0
[ 0.785926] mpp_vepu2 ff650000.vepu: reset_group->rw_sem_on=0
[ 0.786121] mpp_vepu2 ff650000.vepu: probing finish
[ 0.787122] mpp_service mpp-srv: probe success
[ 0.790505] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.790528] dma-pl330 ff6d0000.dma-controller:    DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.792025] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.792046] dma-pl330 ff6e0000.dma-controller:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.793010] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[ 0.793433] vdd_log: supplied by regulator-dummy
[ 0.794226] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[ 0.794902] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 1500000) is a 16550A
[ 0.796921] random: fast init done
[ 0.797002] iommu: Adding device ff8f0000.vop to group 3
[ 0.797039] rockchip-vop ff8f0000.vop: Linked as a consumer to ff8f3f00.iommu
[ 0.797175] random: crng init done
[ 0.797351] iommu: Adding device ff900000.vop to group 4
[ 0.797382] rockchip-vop ff900000.vop: Linked as a consumer to ff903f00.iommu
[ 0.801461] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000.vop
[ 0.801495] rockchip-drm display-subsystem: Linked as a consumer to ff900000.vop
[ 0.802332] rockchip-drm display-subsystem: Linked as a consumer to ff970000.edp
[ 0.802462] rockchip-drm display-subsystem: Linked as a consumer to fec00000.dp
[ 0.802861] rockchip-drm display-subsystem: Linked as a consumer to ff940000.hdmi
[ 0.810289] panel-simple panel: Linked as a consumer to regulator.8
[ 0.810323] panel-simple panel: panel supply vsp not found, using dummy regulator
[ 0.810382] panel-simple panel: Linked as a consumer to regulator.0
[ 0.810406] panel-simple panel: panel supply vsn not found, using dummy regulator
[ 0.811365] midgard ff9a0000.gpu: Failed to get regulator
[ 0.811384] midgard ff9a0000.gpu: Power control initialization failed
[ 0.811876] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.818365] brd: module loaded
[ 0.831535] loop: module loaded
[ 0.831876] zram: Added device: zram0
[ 0.832161] SCSI Media Changer driver v0.25
[ 0.834211] tun: Universal TUN/TAP device driver, 1.6
[ 0.834815] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[ 0.834854] rk_gmac-dwmac fe300000.ethernet: phy regulator is not available yet, deferred probing
[ 0.835264] PPP generic driver version 2.4.2
[ 0.835388] PPP BSD Compression module registered
[ 0.835402] PPP Deflate Compression module registered
[ 0.835437] PPP MPPE Compression module registered
[ 0.835450] NET: Registered protocol family 24
[ 0.835472] PPTP driver version 0.8.5
[ 0.835743] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 0.835754] CSLIP: code copyright 1989 Regents of the University of California.
[ 0.835817] usbcore: registered new interface driver catc
[ 0.835852] usbcore: registered new interface driver kaweth
[ 0.835866] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 0.835899] usbcore: registered new interface driver pegasus
[ 0.835933] usbcore: registered new interface driver rtl8150
[ 0.835971] usbcore: registered new interface driver r8152
[ 0.835983] hso: drivers/net/usb/hso.c: Option Wireless
[ 0.836032] usbcore: registered new interface driver hso
[ 0.836069] usbcore: registered new interface driver asix
[ 0.836103] usbcore: registered new interface driver ax88179_178a
[ 0.836137] usbcore: registered new interface driver cdc_ether
[ 0.836171] usbcore: registered new interface driver cdc_eem
[ 0.836208] usbcore: registered new interface driver dm9601
[ 0.836247] usbcore: registered new interface driver smsc75xx
[ 0.836288] usbcore: registered new interface driver smsc95xx
[ 0.836317] usbcore: registered new interface driver gl620a
[ 0.836353] usbcore: registered new interface driver net1080
[ 0.836387] usbcore: registered new interface driver plusb
[ 0.836422] usbcore: registered new interface driver rndis_host
[ 0.836457] usbcore: registered new interface driver cdc_subset
[ 0.836491] usbcore: registered new interface driver zaurus
[ 0.836529] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 0.836562] usbcore: registered new interface driver int51x1
[ 0.836596] usbcore: registered new interface driver kalmia
[ 0.836631] usbcore: registered new interface driver ipheth
[ 0.836664] usbcore: registered new interface driver sierra_net
[ 0.836701] usbcore: registered new interface driver cx82310_eth
[ 0.836741] usbcore: registered new interface driver cdc_ncm
[ 0.836776] usbcore: registered new interface driver qmi_wwan
[ 0.836805] usbcore: registered new interface driver cdc_mbim
[ 0.837734] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
[ 0.838612] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
[ 0.843477] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.843494] ehci-pci: EHCI PCI platform driver
[ 0.843551] ehci-platform: EHCI generic platform driver
[ 0.845846] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 0.845990] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[ 0.846224] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
[ 0.857281] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 0.857418] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.857434] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.857448] usb usb1: Product: EHCI Host Controller
[ 0.857461] usb usb1: Manufacturer: Linux 4.19.232 ehci_hcd
[ 0.857473] usb usb1: SerialNumber: fe3c0000.usb
[ 0.857852] hub 1-0:1.0: USB hub found
[ 0.857891] hub 1-0:1.0: 1 port detected
[ 0.858412] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.858437] ohci-platform: OHCI generic platform driver
[ 0.858717] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 0.858863] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[ 0.859030] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
[ 0.918057] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 0.918074] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.918084] usb usb2: Product: Generic Platform OHCI controller
[ 0.918093] usb usb2: Manufacturer: Linux 4.19.232 ohci_hcd
[ 0.918102] usb usb2: SerialNumber: fe3e0000.usb
[ 0.918426] hub 2-0:1.0: USB hub found
[ 0.918462] hub 2-0:1.0: 1 port detected
[ 0.919447] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 0.919585] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 0.919972] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000009002030010
[ 0.920018] xhci-hcd xhci-hcd.1.auto: irq 73, io mem 0xfe900000
[ 0.920281] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.920298] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.920311] usb usb3: Product: xHCI Host Controller
[ 0.920324] usb usb3: Manufacturer: Linux 4.19.232 xhci-hcd
[ 0.920336] usb usb3: SerialNumber: xhci-hcd.1.auto
[ 0.920697] hub 3-0:1.0: USB hub found
[ 0.920737] hub 3-0:1.0: 1 port detected
[ 0.920974] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 0.921106] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 0.921128] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 0.921187] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.921286] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 0.921301] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.921313] usb usb4: Product: xHCI Host Controller
[ 0.921325] usb usb4: Manufacturer: Linux 4.19.232 xhci-hcd
[ 0.921336] usb usb4: SerialNumber: xhci-hcd.1.auto
[ 0.921647] hub 4-0:1.0: USB hub found
[ 0.921681] hub 4-0:1.0: 1 port detected
[ 0.922000] usbcore: registered new interface driver cdc_acm
[ 0.922017] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.922066] usbcore: registered new interface driver usblp
[ 0.922109] usbcore: registered new interface driver cdc_wdm
[ 0.922304] usbcore: registered new interface driver uas
[ 0.922376] usbcore: registered new interface driver usb-storage
[ 0.922416] usbcore: registered new interface driver ums-alauda
[ 0.922475] usbcore: registered new interface driver ums-cypress
[ 0.922512] usbcore: registered new interface driver ums-datafab
[ 0.922551] usbcore: registered new interface driver ums_eneub6250
[ 0.922589] usbcore: registered new interface driver ums-freecom
[ 0.922628] usbcore: registered new interface driver ums-isd200
[ 0.922666] usbcore: registered new interface driver ums-jumpshot
[ 0.922704] usbcore: registered new interface driver ums-karma
[ 0.922740] usbcore: registered new interface driver ums-onetouch
[ 0.922778] usbcore: registered new interface driver ums-sddr09
[ 0.922816] usbcore: registered new interface driver ums-sddr55
[ 0.922854] usbcore: registered new interface driver ums-usbat
[ 0.922926] usbcore: registered new interface driver usbserial_generic
[ 0.922951] usbserial: USB Serial support registered for generic
[ 0.922989] usbcore: registered new interface driver option
[ 0.923016] usbserial: USB Serial support registered for GSM modem (1-port)
[ 0.923125] usbcore: registered new interface driver trancevibrator
[ 0.923560] usbcore: registered new interface driver xpad
[ 0.923609] usbcore: registered new interface driver usb_acecad
[ 0.923653] usbcore: registered new interface driver aiptek
[ 0.923688] usbcore: registered new interface driver gtco
[ 0.923729] usbcore: registered new interface driver hanwang
[ 0.923769] usbcore: registered new interface driver kbtab
[ 0.924128] cyttsp5_loader_init: Parade TTSP FW Loader Driver (Built TTDA.03.08.874312) rc=0
[ 0.924153] cyttsp5_device_access_init: Parade TTSP Device Access Driver (Built TTDA.03.08.874312) rc=0
[ 0.925586] i2c /dev entries driver
[ 0.927030] input: gsl3673 as /devices/platform/ff110000.i2c/i2c-1/1-0040/input/input0
[ 0.997411] gsl3673 1-0040: GSL3673 test_i2c error!
[ 0.997428] gsl3673 1-0040: gsl_probe: init_chip failed
[ 0.997717] gsl3673: probe of 1-0040 failed with error -1
[ 0.999204] rk808 0-001b: chip id: 0x0
[ 1.002506] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 1.002538] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 1.002971] vdd_center: supplied by vcc_sys
[ 1.003618] vdd_cpu_l: supplied by vcc_sys
[ 1.003855] vcc_ddr: supplied by vcc_sys
[ 1.004362] vcc_1v8: supplied by vcc_sys
[ 1.004849] vcc1v8_dvp: supplied by vcc_sys
[ 1.005328] vcc3v0_tp: supplied by vcc_sys
[ 1.005815] vcc1v8_pmu: supplied by vcc_sys
[ 1.006317] vcc_sdio: supplied by vcc_sys
[ 1.006680] vcca3v0_codec: supplied by vcc_sys
[ 1.007161] vcc_1v5: supplied by vcc_sys
[ 1.007545] vcca1v8_codec: supplied by vcc_sys
[ 1.008038] vcc_3v0: supplied by vcc_sys
[ 1.008281] rk808 0-001b: failed to register 12 regulator
[ 1.012974] rk808-rtc rk808-rtc: registered as rtc0
[ 1.013484] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:55:40 UTC (1358499340)
[ 1.014002] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 1.014424] vdd_cpu_b: supplied by vcc_sys
[ 1.015978] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 1.016395] vdd_gpu: supplied by vcc_sys
[ 1.018335] fusb302 4-0022: Can't get property of role, set role to default DRP
[ 1.021381] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
[ 1.021530] input: Typec_Headphone as /devices/platform/ff3d0000.i2c/i2c-4/4-0022/input/input1
[ 1.021826] gsensor_mpu6500 4-0068: sensor_register_device: mpu6500_acc, id = 29
[ 1.021846] i2c i2c-4: sensor_probe: mpu6500_acc,000000001bce5021
[ 1.021890] gsensor_mpu6500 4-0068: sensor_chip_init:mpu6500_acc:devid=0x0,ops=0x00000000577598cf
[ 1.022199] gsensor_mpu6500 4-0068: set MPU6500_PWR_MGMT_1 error,res: -6!
[ 1.022213] gsensor_mpu6500 4-0068: sensor_initial:fail to init sensor
[ 1.022226] gsensor_mpu6500 4-0068: sensor_chip_init:fail to init sensor
[ 1.022238] i2c i2c-4: sensor_probe failed -2
[ 1.022238]
[ 1.022281] i2c i2c-4: 1 i2c clients have been registered at 0x68
[ 1.022801] vm149c 1-000c: probing...
[ 1.022818] vm149c 1-000c: driver version: 00.01.00
[ 1.022832] vm149c 1-000c: could not get module rockchip,vcm-max-current from dts!
[ 1.022845] vm149c 1-000c: could not get module rockchip,vcm-start-current from dts!
[ 1.022855] vm149c 1-000c: could not get module rockchip,vcm-rated-current from dts!
[ 1.022864] vm149c 1-000c: could not get module rockchip,vcm-step-mode from dts!
[ 1.022897] vm149c 1-000c: probing successful
[ 1.022991] sgm3784 1-0030: driver version: 00.01.00
[ 1.023046] sgm3784 1-0030: get torch-gpio failed, using assist light mode
[ 1.023085] sgm3784 1-0030: led0 max torch:299200UA flash:1122000UA timeout:1600000US
[ 1.023097] sgm3784 1-0030: led1 max torch:299200UA flash:1122000UA timeout:1600000US
[ 1.023264] sgm3784 1-0030: sgm3784_i2c_read: reg:0x0 failed
[ 1.023279] sgm3784 1-0030: Read chip id error
[ 1.024462] iommu: Adding device ff910000.rkisp1 to group 5
[ 1.024491] rkisp1 ff910000.rkisp1: Linked as a consumer to ff914000.iommu
[ 1.024668] rkisp1 ff910000.rkisp1: rkisp1 driver version: v00.01.05
[ 1.024698] rkisp1 ff910000.rkisp1: Missing rockchip,grf property
[ 1.024961] rkisp1 ff910000.rkisp1: Entity type for entity rkisp1-isp-subdev was not initialized!
[ 1.026993] usbcore: registered new interface driver uvcvideo
[ 1.027011] USB Video Class driver (1.1.1)
[ 1.028404] __power_supply_register: Expected proper parent device for 'test_ac'
[ 1.028583] __power_supply_register: Expected proper parent device for 'test_battery'
[ 1.028869] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[ 1.028965] __power_supply_register: Expected proper parent device for 'test_usb'
[ 1.030366] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[ 1.031467] device-mapper: uevent: version 1.0.3
[ 1.031731] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: [email protected]
[ 1.031956] device-mapper: verity-avb: AVB error handler initialized with vbmeta device:
[ 1.031976] Bluetooth: HCI UART driver ver 2.3
[ 1.031992] Bluetooth: HCI UART protocol H4 registered
[ 1.032244] cpu cpu0: bin=1
[ 1.032282] cpu cpu0: leakage=34
[ 1.032323] cpu cpu0: Failed to get reg
[ 1.032344] cpu cpu0: bin-scale=34
[ 1.032406] cpu cpu4: bin=1
[ 1.032434] cpu cpu4: leakage=54
[ 1.032675] cpu cpu4: Linked as a consumer to regulator.23
[ 1.045091] cpu cpu4: temp=33333, pvtm=159454 (160022 + -568)
[ 1.046178] cpu cpu4: Dropping the link to regulator.23
[ 1.046224] cpu cpu4: pvtm-volt-sel=3
[ 1.046248] cpu cpu4: bin-scale=17
[ 1.047533] sdhci: Secure Digital Host Controller Interface driver
[ 1.047549] sdhci: Copyright(c) Pierre Ossman
[ 1.047559] Synopsys Designware Multimedia Card Interface Driver
[ 1.048119] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.048387] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[ 1.048412] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[ 1.048456] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[ 1.048553] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[ 1.048570] mmc_host mmc0: card is non-removable.
[ 1.061076] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.074739] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.075052] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 1.075079] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 1.075150] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
[ 1.075555] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.102549] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 1.104549] cryptodev: driver 1.12 loaded.
[ 1.104653] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.108003] usbcore: registered new interface driver usbhid
[ 1.108021] usbhid: USB HID core driver
[ 1.108116] ion_device_add_heap: ion_system_contig_heap id=0 type=1
[ 1.108636] ion_device_add_heap: ion_system_heap id=1 type=0
[ 1.108666] ion_device_add_heap: reserved id=2 type=4
[ 1.109065] ashmem: initialized
[ 1.110599] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 1.112511] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.113228] rockchip-saradc ff100000.saradc: failed to get regulator, -517
[ 1.113968] optee: probing for conduit method from DT.
[ 1.113999] optee: revision 1.1
[ 1.114614] optee: initialized driver
[ 1.114638] rknandbase v1.2 2021-01-07
[ 1.114770] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.115347] usbcore: registered new interface driver snd-usb-audio
[ 1.116424] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.118100] rt5651 1-001a: Device with ID register 0xffffff80 is not rt5651
[ 1.120268] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.123251] netem: version 1.3
[ 1.123278] u32 classifier
[ 1.123286] Actions configured
[ 1.124026] xt_time: kernel timezone is -0000
[ 1.124182] gre: GRE over IPv4 demultiplexor driver
[ 1.124196] IPv4 over IPsec tunneling driver
[ 1.125022] Initializing XFRM netlink socket
[ 1.125048] IPsec XFRM device driver
[ 1.125109] mmc0: queuing unknown CIS tuple 0x81 (9 bytes)
[ 1.125473] NET: Registered protocol family 10
[ 1.126752] Segment Routing with IPv6
[ 1.126854] mip6: Mobile IPv6
[ 1.127641] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.128537] NET: Registered protocol family 17
[ 1.128567] NET: Registered protocol family 15
[ 1.128631] Bridge firewalling registered
[ 1.129064] Bluetooth: RFCOMM TTY layer initialized
[ 1.129098] Bluetooth: RFCOMM socket layer initialized
[ 1.129138] Bluetooth: RFCOMM ver 1.11
[ 1.129157] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.129169] Bluetooth: BNEP filters: protocol multicast
[ 1.129183] Bluetooth: BNEP socket layer initialized
[ 1.129199] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.129211] Bluetooth: HIDP socket layer initialized
[ 1.129240] _core: L2TP core driver, V2.0
[ 1.129261] _ppp: PPPoL2TP kernel driver, V2.0
[ 1.129275] [BT_RFKILL]: Enter rfkill_rk_init
[ 1.129289] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 1.129741] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[ 1.129793] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6354
[ 1.129809] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[ 1.129824] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[ 1.129883] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 3, flags = 0.
[ 1.129900] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[ 1.129915] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[ 1.129930] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[ 1.129944] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[ 1.130560] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
[ 1.130637] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
[ 1.130661] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.
[ 1.130690] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
[ 1.130762] [BT_RFKILL]: Request irq for bt wakeup host
[ 1.130844] [BT_RFKILL]: BT_WAKE_HOST IRQ fired
[ 1.130870] [BT_RFKILL]: ** disable irq
[ 1.131030] [BT_RFKILL]: bt_default device registered.
[ 1.131707] gyro_mpu6500 4-0068-1: sensor_register_device: mpu6500_gyro, id = 58
[ 1.131730] i2c i2c-4: sensor_probe: mpu6500_gyro,00000000cc8b3cbc
[ 1.131784] gyro_mpu6500 4-0068-1: sensor_chip_init:mpu6500_gyro:devid=0x0,ops=0x00000000e691036b
[ 1.132420] gyro_mpu6500 4-0068-1: sensor_active:fail to active sensor
[ 1.132441] gyro_mpu6500 4-0068-1: sensor_init:line=84,error
[ 1.132458] gyro_mpu6500 4-0068-1: sensor_initial:fail to init sensor
[ 1.132473] gyro_mpu6500 4-0068-1: sensor_chip_init:fail to init sensor
[ 1.132489] i2c i2c-4: sensor_probe failed -2
[ 1.132489]
[ 1.132916] ov13850 1-0010: driver version: 00.01.05
[ 1.132976] ov13850 1-0010: Failed to get power-gpios, maybe no use
[ 1.133061] ov13850 1-0010: 1-0010 supply avdd not found, using dummy regulator
[ 1.133177] ov13850 1-0010: Linked as a consumer to regulator.0
[ 1.133204] ov13850 1-0010: 1-0010 supply dovdd not found, using dummy regulator
[ 1.133294] ov13850 1-0010: 1-0010 supply dvdd not found, using dummy regulator
[ 1.133416] ov13850 1-0010: could not get sleep pinstate
[ 1.133840] mmc2: new HS400 Enhanced strobe MMC card at address 0001
[ 1.134759] mmcblk2: mmc2:0001 TX2932 29.1 GiB
[ 1.135387] mmcblk2boot0: mmc2:0001 TX2932 partition 1 4.00 MiB
[ 1.136021] mmcblk2boot1: mmc2:0001 TX2932 partition 2 4.00 MiB
[ 1.136247] mmcblk2rpmb: mmc2:0001 TX2932 partition 3 4.00 MiB, chardev (237:0)
[ 1.137496] ov13850 1-0010: Unexpected sensor id(000000), ret(-5)
[ 1.138424] gc8034 1-0037: driver version: 00.01.06
[ 1.138481] gc8034 1-0037: Failed to get power-gpios, maybe no use
[ 1.138565] gc8034 1-0037: 1-0037 supply avdd not found, using dummy regulator
[ 1.138648] gc8034 1-0037: Linked as a consumer to regulator.0
[ 1.138696] gc8034 1-0037: 1-0037 supply dovdd not found, using dummy regulator
[ 1.138774] gc8034 1-0037: 1-0037 supply dvdd not found, using dummy regulator
[ 1.138840] gc8034 1-0037: lane_num(4) pixel_rate(319887360)
[ 1.138912] gc8034 1-0037: could not get sleep pinstate
[ 1.139895] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
[ 1.143825] gc8034 1-0037: gc8034 read reg:0xf0 failed !
[ 1.144071] gc8034 1-0037: gc8034 read reg:0xf1 failed !
[ 1.144092] gc8034 1-0037: Unexpected sensor id(000000), ret(-6)
[ 1.145517] registered taskstats version 1
[ 1.145536] Loading compiled-in X.509 certificates
[ 1.145682] Key type ._fscrypt registered
[ 1.145699] Key type .fscrypt registered
[ 1.145713] Key type fscrypt-provisioning registered
[ 1.146084] pstore: Using compression: deflate
[ 1.147143] rga: rga2_irq, irq = 49, match scheduler
[ 1.147679] rga: Driver loaded successfully rga[3] ver:3.2.18218
[ 1.147777] rga: probe successfully
[ 1.148298] rga: Module initialized. v1.2.4
[ 1.181622] reg-fixed-voltage vcc1v8-s3: Failed to register regulator: -517
[ 1.182114] reg-fixed-voltage vcc3v0-sd: Failed to register regulator: -517
[ 1.182408] vcc3v3_sys: supplied by vcc_sys
[ 1.182814] phy phy-ff770000.syscon:[email protected]: Linked as a consumer to regulator.6
[ 1.183442] phy phy-ff770000.syscon:[email protected]: No vbus specified for otg port
[ 1.185677] rockchip-drm display-subsystem: defer getting devfreq
[ 1.185853] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[ 1.185982] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
[ 1.186043] rockchip-vop ff900000.vop: missing rockchip,grf property
[ 1.186198] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
[ 1.186235] rockchip-dp ff970000.edp: no DP phy configured
[ 1.186853] rockchip-drm display-subsystem: bound ff970000.edp (ops rockchip_dp_component_ops)
[ 1.187310] rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops)
[ 1.187537] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 1.188677] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[ 1.190163] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops)
[ 1.190183] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.190195] [drm] No driver support for vblank timestamp query.
[ 1.191723] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[ 1.200417] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 135
[ 1.204173] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[ 1.259357] usb 1-1: New USB device found, idVendor=1a40, idProduct=0201, bcdDevice= 1.00
[ 1.259387] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.259399] usb 1-1: Product: USB 2.0 Hub [MTT]
[ 1.260389] hub 1-1:1.0: USB hub found
[ 1.260654] hub 1-1:1.0: 7 ports detected
[ 1.277695] vendor storage:20190527 ret = 0
[ 1.728287] rockchip-drm display-subsystem: fb0: frame buffer device
[ 1.729016] [drm] Initialized rockchip 2.0.0 20140818 for display-subsystem on minor 0
[ 1.729784] midgard ff9a0000.gpu: Linked as a consumer to regulator.24
[ 1.729841] midgard ff9a0000.gpu: leakage=39
[ 1.744437] midgard ff9a0000.gpu: temp=33333, pvtm=126875 (127243 + -368)
[ 1.746231] midgard ff9a0000.gpu: pvtm-volt-sel=2
[ 1.746668] midgard ff9a0000.gpu: avs=0
[ 1.747140] midgard ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[ 1.747233] midgard ff9a0000.gpu: Protected mode not available
[ 1.747665] midgard ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[ 1.747713] midgard ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[ 1.747808] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 417; [Func] : midgard_kbase_devfreq_init(); success initing power_model_simple.
[ 1.748676] midgard ff9a0000.gpu: Probed as mali0
[ 1.749331] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[ 1.749375] rk_gmac-dwmac fe300000.ethernet: phy regulator is not available yet, deferred probing
[ 1.749813] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
[ 1.757986] ehci-platform fe380000.usb: EHCI Host Controller
[ 1.758314] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
[ 1.758610] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
[ 1.770773] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 1.770946] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.770964] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.770980] usb usb5: Product: EHCI Host Controller
[ 1.770993] usb usb5: Manufacturer: Linux 4.19.232 ehci_hcd
[ 1.771006] usb usb5: SerialNumber: fe380000.usb
[ 1.771595] hub 5-0:1.0: USB hub found
[ 1.771634] hub 5-0:1.0: 1 port detected
[ 1.772229] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 1.772512] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6
[ 1.772903] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
[ 1.831602] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 1.831630] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.831642] usb usb6: Product: Generic Platform OHCI controller
[ 1.831653] usb usb6: Manufacturer: Linux 4.19.232 ohci_hcd
[ 1.831662] usb usb6: SerialNumber: fe3a0000.usb
[ 1.832053] hub 6-0:1.0: USB hub found
[ 1.832091] hub 6-0:1.0: 1 port detected
[ 1.832740] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 1.832770] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 1.832836] vdd_center: supplied by vcc_sys
[ 1.833125] vdd_cpu_l: supplied by vcc_sys
[ 1.833366] vcc_ddr: supplied by vcc_sys
[ 1.833583] vcc_1v8: supplied by vcc_sys
[ 1.833800] vcc1v8_dvp: supplied by vcc_sys
[ 1.834061] vcc3v0_tp: supplied by vcc_sys
[ 1.834275] vcc1v8_pmu: supplied by vcc_sys
[ 1.834509] vcc_sdio: supplied by vcc_sys
[ 1.834731] vcca3v0_codec: supplied by vcc_sys
[ 1.834953] vcc_1v5: supplied by vcc_sys
[ 1.835168] vcca1v8_codec: supplied by vcc_sys
[ 1.835401] vcc_3v0: supplied by vcc_sys
[ 1.835627] vcc3v3_s3: supplied by vcc3v3_sys
[ 1.835853] vcc3v3_s0: supplied by vcc3v3_sys
[ 1.836364] rockchip-iodomain ff320000.syscon:io-domains: Linked as a consumer to regulator.39
[ 1.836401] rockchip-iodomain ff320000.syscon:io-domains: pmu1830(3000000 uV) supplied by vcc_3v0
[ 1.836689] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.39
[ 1.836719] rockchip-iodomain ff770000.syscon:io-domains: bt656(3000000 uV) supplied by vcc_3v0
[ 1.836777] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.38
[ 1.836805] rockchip-iodomain ff770000.syscon:io-domains: audio(1800000 uV) supplied by vcca1v8_codec
[ 1.836882] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.35
[ 1.836908] rockchip-iodomain ff770000.syscon:io-domains: sdmmc(3000000 uV) supplied by vcc_sdio
[ 1.836986] rockchip-iodomain ff770000.syscon:io-domains: gpio1830(3000000 uV) supplied by vcc_3v0
[ 1.837171] cpu cpu0: Linked as a consumer to regulator.29
[ 1.837214] cpu cpu0: Dropping the link to regulator.29
[ 1.837362] cpu cpu0: Linked as a consumer to regulator.29
[ 1.837856] cpu cpu0: avs=0
[ 1.838049] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[ 1.838592] cpu cpu0: failed to find power_model node
[ 1.838975] cpu cpu4: Linked as a consumer to regulator.23
[ 1.839605] cpu cpu4: avs=0
[ 1.839651] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 2 >= em_cap_state1
[ 1.839843] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[ 1.841549] cpu cpu4: failed to find power_model node
[ 1.842633] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.842809] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 1.842838] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 1.842875] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
[ 1.842985] dwmmc_rockchip fe320000.dwmmc: Linked as a consumer to regulator.35
[ 1.843060] dwmmc_rockchip fe320000.dwmmc: Dropping the link to regulator.35
[ 1.843524] rockchip-dmc dmc: Linked as a consumer to regulator.28
[ 1.843561] rockchip-dmc dmc: Failed to get ddr_leakage
[ 1.844073] rockchip-dmc dmc: avs=0
[ 1.844191] rockchip-dmc dmc: failed to get vop pn to msch rl
[ 1.844335] rockchip-dmc dmc: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
[ 1.844370] rockchip-dmc dmc: could not find power_model node
[ 1.844564] rockchip-dmc dmc: Get wrong frequency, Request 600000000, Current 856000000
[ 1.844589] devfreq dmc: Couldn't update frequency transition information.
[ 1.844987] rockchip-saradc ff100000.saradc: failed to get regulator, -517
[ 1.846026] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[ 1.848104] asoc-simple-card spdif-sound: dit-hifi <-> ff870000.spdif mapping ok
[ 1.848603] vcc1v8_s3: supplied by vcc_1v8
[ 1.849009] vcc3v0_sd: supplied by vcc3v3_sys
[ 1.849802] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[ 1.849900] rk_gmac-dwmac fe300000.ethernet: Linked as a consumer to regulator.40
[ 1.849916] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 1.849927] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[ 1.849937] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[ 1.849955] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 1.850000] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[ 1.850013] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 1.855030] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 1.855433] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[ 1.855451] rk_gmac-dwmac fe300000.ethernet:    DWMAC1000
[ 1.855460] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[ 1.855470] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[ 1.855478] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[ 1.855487] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[ 1.855495] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[ 1.855529] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[ 1.855537] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[ 1.855546] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 1.900886] rockchip-dmc dmc: Get wrong frequency, Request 600000000, Current 856000000
[ 1.936173] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 1.936212] mdio_bus stmmac-0:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[ 1.936224] mdio_bus stmmac-0:02: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:02, irq=POLL)
[ 1.936235] mdio_bus stmmac-0:03: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:03, irq=POLL)
[ 1.936245] mdio_bus stmmac-0:04: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:04, irq=POLL)
[ 1.936255] mdio_bus stmmac-0:05: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:05, irq=POLL)
[ 1.936264] mdio_bus stmmac-0:06: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:06, irq=POLL)
[ 1.936274] mdio_bus stmmac-0:07: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:07, irq=POLL)
[ 1.936283] mdio_bus stmmac-0:08: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:08, irq=POLL)
[ 1.936292] mdio_bus stmmac-0:09: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:09, irq=POLL)
[ 1.936301] mdio_bus stmmac-0:0a: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:0a, irq=POLL)
[ 1.936310] mdio_bus stmmac-0:0b: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:0b, irq=POLL)
[ 1.936319] mdio_bus stmmac-0:0c: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:0c, irq=POLL)
[ 1.936329] mdio_bus stmmac-0:0d: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:0d, irq=POLL)
[ 1.936358] mdio_bus stmmac-0:0e: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:0e, irq=POLL)
[ 1.936376] mdio_bus stmmac-0:0f: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:0f, irq=POLL)
[ 1.936393] mdio_bus stmmac-0:10: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:10, irq=POLL)
[ 1.936411] mdio_bus stmmac-0:11: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:11, irq=POLL)
[ 1.936427] mdio_bus stmmac-0:12: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:12, irq=POLL)
[ 1.936469] mdio_bus stmmac-0:13: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:13, irq=POLL)
[ 1.936488] mdio_bus stmmac-0:14: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:14, irq=POLL)
[ 1.936505] mdio_bus stmmac-0:15: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:15, irq=POLL)
[ 1.936522] mdio_bus stmmac-0:16: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:16, irq=POLL)
[ 1.936539] mdio_bus stmmac-0:17: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:17, irq=POLL)
[ 1.936548] mdio_bus stmmac-0:18: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:18, irq=POLL)
[ 1.936557] mdio_bus stmmac-0:19: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:19, irq=POLL)
[ 1.936576] mdio_bus stmmac-0:1a: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:1a, irq=POLL)
[ 1.936593] mdio_bus stmmac-0:1b: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:1b, irq=POLL)
[ 1.936609] mdio_bus stmmac-0:1c: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:1c, irq=POLL)
[ 1.936626] mdio_bus stmmac-0:1d: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:1d, irq=POLL)
[ 1.936643] mdio_bus stmmac-0:1e: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:1e, irq=POLL)
[ 1.936660] mdio_bus stmmac-0:1f: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:1f, irq=POLL)
[ 1.938238] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.938584] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 1.938616] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 1.938655] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
[ 1.938757] dwmmc_rockchip fe320000.dwmmc: Linked as a consumer to regulator.43
[ 1.938816] dwmmc_rockchip fe320000.dwmmc: Linked as a consumer to regulator.35
[ 1.938912] mmc_host mmc1: card is polling.
[ 1.950814] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.953981] rockchip-dmc dmc: Get wrong frequency, Request 600000000, Current 856000000
[ 1.964418] rockchip-saradc ff100000.saradc: Linked as a consumer to regulator.42
[ 1.966274] input: adc-keys as /devices/platform/adc-keys/input/input2
[ 1.969716] input: gpio-keys as /devices/platform/gpio-keys/input/input3
[ 1.970774] It doesn't contain Rogue gpu
[ 1.971464] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 1.972250] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 1.973151] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '16:40:09', on 'Dec 18 2023'.
[ 1.973327] Mali:
[ 1.973328] Mali device driver loaded
[ 1.973354] rkisp1 ff910000.rkisp1: clear unready subdev num: 3
[ 1.973748] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 1.973764] rkisp1: update sensor failed
[ 1.973800] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 1.973816] cfg80211: failed to load regulatory.db
[ 1.973864] ALSA device list:
[ 1.973874] #0: hdmi-sound
[ 1.973886] #1: ROCKCHIP,SPDIF
[ 1.987410] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[ 1.988510] Freeing unused kernel memory: 1280K
[ 1.988611] Run /init as init process
[ 1.997287] phy phy-ff770000.syscon:[email protected]: charger = USB_SDP_CHARGER
[ 1.998656] init: init first stage started!
[ 1.998761] init: Unable to open /lib/modules, skipping module loading.
[ 1.998950] init: Copied ramdisk prop to /second_stage_resources/system/etc/ramdisk/build.prop
[ 1.999202] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt
[ 1.999851] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 2.007367] rockchip-dmc dmc: Get wrong frequency, Request 600000000, Current 856000000
[ 2.023969] mmc_host mmc1: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[ 2.025064] init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/by-name/metadata
[ 2.025140] init: [libfs_mgr]Filesystem on /dev/block/by-name/metadata was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46
[ 2.026816] EXT4-fs (mmcblk2p11): Ignoring removed nomblk_io_submit option
[ 2.040121] EXT4-fs (mmcblk2p11): recovery complete
[ 2.040548] EXT4-fs (mmcblk2p11): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 2.040631] init: [libfs_mgr]check_fs(): mount(/dev/block/by-name/metadata,/metadata,ext4)=0: Success
[ 2.059458] init: [libfs_mgr]check_fs(): unmount(/metadata) succeeded
[ 2.059571] init: [libfs_mgr]Not running /system/bin/e2fsck on /dev/block/mmcblk2p11 (executable not in system image)
[ 2.060629] rockchip-dmc dmc: Get wrong frequency, Request 600000000, Current 856000000
[ 2.062930] EXT4-fs (mmcblk2p11): mounted filesystem with ordered data mode. Opts: discard
[ 2.063156] mmc_host mmc1: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[ 2.074851] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1
[ 2.083223] EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1
[ 2.088575] EXT4-fs (dm-4): mounted filesystem without journal. Opts: barrier=1
[ 2.093704] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1
[ 2.097985] EXT4-fs (dm-3): mounted filesystem without journal. Opts: barrier=1
[ 2.102639] EXT4-fs (dm-5): mounted filesystem without journal. Opts: barrier=1
[ 2.107836] EXT4-fs (dm-6): mounted filesystem without journal. Opts: barrier=1
[ 2.116888] rockchip-dmc dmc: Get wrong frequency, Request 600000000, Current 856000000
[ 2.119456] init: 26 output lines suppressed due to ratelimiting
[ 2.212846] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
[ 2.245043] rockchip-dmc dmc: Get wrong frequency, Request 600000000, Current 856000000
[ 2.255101] init: Opening SELinux policy
[ 2.260663] init: Loading SELinux policy
[ 2.274466] SELinux: Permission nlmsg_getneigh in class netlink_route_socket not defined in policy.
[ 2.274669] SELinux: the above unknown classes and permissions will be denied
[ 2.274717] SELinux: policy capability network_peer_controls=1
[ 2.274728] SELinux: policy capability open_perms=1
[ 2.274733] SELinux: policy capability extended_socket_class=1
[ 2.274745] SELinux: policy capability always_check_network=0
[ 2.274750] SELinux: policy capability cgroup_seclabel=0
[ 2.274762] SELinux: policy capability nnp_nosuid_transition=1
[ 2.401245] audit: type=1403 audit(1358499341.886:2): auid=4294967295 ses=4294967295 lsm=selinux res=1
[ 2.405552] selinux: SELinux: Loaded file_contexts
[ 2.405577] selinux:
[ 2.479921] init: init second stage started!
[ 2.521104] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 2.524437] init: Overriding previous property 'persist.sys.usb.config':'none' with new value 'adb'
[ 2.524951] init: Overriding previous property 'persist.sys.usb.config':'adb' with new value 'none'
[ 2.525002] init: Couldn't load property file '/vendor/default.prop': open() failed: No such file or directory: No such file or directory
[ 2.526905] init: Do not have permissions to set 'http://www.google.com/webhp?client' to '' in property file '/vendor/build.prop': Illegal property name
[ 2.526929] init: Do not have permissions to set '{CID}&source' to 'android-home' in property file '/vendor/build.prop': Illegal property name
[ 2.531839] init: Setting product property ro.product.brand to 'rockchip' (from ro.product.product.brand)
[ 2.531881] init: Setting product property ro.product.device to 'rk3399_Android12' (from ro.product.product.device)
[ 2.531907] init: Setting product property ro.product.manufacturer to 'rockchip' (from ro.product.product.manufacturer)
[ 2.602802] audit: type=1107 audit(1358499342.086:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc: denied { read } for property=persist.sys.adb_enable pid=0 uid=0 gid=0 scontext=u:r:vendor_init:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=1'
[ 2.603065] audit: type=1107 audit(1358499342.086:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc: denied { read } for property=flash.success pid=0 uid=0 gid=0 scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=1'
[ 2.690776] rockchip-dmc dmc: Get wrong frequency, Request 600000000, Current 856000000
[ 2.734645] ueventd: ueventd started!
[ 2.736646] selinux: SELinux: Loaded file_contexts
[ 2.736670] selinux:
[ 2.736920] ueventd: Parsing file /system/etc/ueventd.rc...
[ 2.737339] ueventd: Added '/vendor/etc/ueventd.rc' to import list
[ 2.737357] ueventd: Added '/odm/etc/ueventd.rc' to import list
[ 2.737654] ueventd: Parsing file /vendor/etc/ueventd.rc...
[ 2.738622] ueventd: Parsing file /odm/etc/ueventd.rc...
[ 2.738647] ueventd: Unable to read config file '/odm/etc/ueventd.rc': open() failed: No such file or directory
[ 2.738673] ueventd: Parsing file /vendor/ueventd.rc...
[ 2.763992] rockchip-dmc dmc: Get wrong frequency, Request 600000000, Current 856000000
[ 2.817368] rockchip-dmc dmc: Get wrong frequency, Request 600000000, Current 856000000
[ 2.870713] rockchip-dmc dmc: Get wrong frequency, Request 600000000, Current 856000000
[ 2.924058] rockchip-dmc dmc: Get wrong frequency, Request 600000000, Current 856000000
[ 3.017481] rockchip-dmc dmc: Get wrong frequency, Request 600000000, Current 856000000
[ 3.019700] midgard_kbase: disagrees about version of symbol module_layout
[ 3.077537] rockchip-dmc dmc: Get wrong frequency, Request 600000000, Current 856000000
[ 3.175218] rockchip-dmc dmc: Get wrong frequency, Request 800000000, Current 856000000
[ 3.276853] Trying to create more than 6 SchedTune boosting groups
[ 3.313643] Registered swp emulation handler
console:/ $ [ 3.363808] logd.auditd: start
[ 3.363835] logd.klogd: 3363260238
[ 3.372332] binder: 164:164 ioctl 40046210 7ffa55f1c4 returned -22
[ 3.373416] binder: 166:166 ioctl 40046210 7ff874fc24 returned -22
[ 3.375597] binder: 165:165 ioctl 40046210 7ff02ca454 returned -22
[ 3.381765] EXT4-fs (mmcblk2p10): Ignoring removed nomblk_io_submit option
[ 3.384272] EXT4-fs (mmcblk2p10): recovery complete
[ 3.384295] EXT4-fs (mmcblk2p10): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 3.428165] binder: 174:174 ioctl 40046210 7ffe7ca3f4 returned -22
[ 3.428343] binder: 174:174 ioctl 40046210 7ffe7ca394 returned -22
[ 3.433806] e2fsck: e2fsck 1.45.4 (23-Sep-2019)
[ 3.436686] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[ 3.437548] e2fsck: Pass 2: Checking directory structure
[ 3.438524] e2fsck: Pass 3: Checking directory connectivity
[ 3.438561] e2fsck: Pass 4: Checking reference counts
[ 3.441581] e2fsck: Pass 5: Checking group summary information
[ 3.451153] e2fsck: /dev/block/by-name/cache: 17/98304 files (0.0% non-contiguous), 7203/98304 blocks
[ 3.456571] EXT4-fs (mmcblk2p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[ 3.491180] binder: 187:187 ioctl 40046210 7fed5e0f84 returned -22
[ 3.556862] binder: 189:189 ioctl 40046210 7ff2d7d244 returned -22
[ 3.557423] binder: 189:189 ioctl 40046210 7ff2d7d184 returned -22
[ 3.573772] type=1400 audit(1358499343.056:5): avc: denied { write } for comm="tee-supplicant" name="property_service" dev="tmpfs" ino=21338 scontext=u:r:tee:s0 tcontext=u:object_r:property_socket:s0 tclass=sock_file permissive=1
[ 3.573860] type=1400 audit(1358499343.056:6): avc: denied { connectto } for comm="tee-supplicant" path="/dev/socket/property_service" scontext=u:r:tee:s0 tcontext=u:r:init:s0 tclass=unix_stream_socket permissive=1
[ 3.574026] type=1107 audit(1358499343.056:7): uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc: denied { set } for property=vendor.security.tee_supplicant pid=188 uid=0 gid=0 scontext=u:r:tee:s0 tcontext=u:object_r:vendor_default_prop:s0 tclass=property_service permissive=1'
[ 3.613725] wait_for_keymaster: Waiting for Keymaster device
[ 3.613981] binder: 198:198 ioctl 40046210 7ff91014d4 returned -22
[ 3.632143] binder: 191:191 ioctl 40046210 7fe5d4a174 returned -22
[ 3.633151] binder: 192:192 ioctl 40046210 7ffd1a5b54 returned -22
INF USER-TA:read_data_from_uboot_ta:661: (read_data_from_uboot_ta) filename(security_partition) !

ERR [0x0] TEE-CORE:ree_fs_open:1492: tee file not exists
ERR USER-TA:read_data_from_uboot_ta:689: TEE_InvokeTACommand returned 0xffff0000

INF USER-TA:TA_OpenSessionEntryPoint:341: Hello Rockchip Keymaster! rpmb :1

INF USER-TA:read_data_from_uboot_ta:661: (read_data_from_uboot_ta) filename(security_partition) !

ERR [0x1] TEE-CORE:ree_fs_open:1492: tee file not exists
ERR USER-TA:read_data_from_uboot_ta:689: TEE_InvokeTACommand returned 0xffff0000

INF USER-TA:TA_OpenSessionEntryPoint:341: Hello Rockchip Keymaster! rpmb :1

[ 3.675636] binder: 190:190 ioctl 40046210 7ffe073ac4 returned -22
[ 3.680525] binder: 190:200 ioctl 40046210 77b5c8b154 returned -22
[ 3.803657] binder: 196:196 ioctl 40046210 7fe2095954 returned -22
[ 3.805212] binder: 196:196 ioctl 40046210 7fe2095974 returned -22
[ 4.015581] binder: 222:222 ioctl 40046210 7ffe2c1e54 returned -22
[ 4.016101] binder: 222:222 ioctl 40046210 7ffe2c1e34 returned -22
[ 4.112184] binder: 197:197 ioctl 40046210 7fca2b9ec4 returned -22
[ 4.615076] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?)
[ 4.615938] wait_for_keymaster: Keymaster device ready
[ 4.616958] binder: 241:241 ioctl 40046210 7fc5ae8ac4 returned -22
[ 4.620714] binder: undelivered transaction 128, process died.
[ 4.632260] binder: 242:242 ioctl 40046210 7fe47e4214 returned -22
[ 4.659865] binder: 246:246 ioctl 40046210 7fd03afa44 returned -22
[ 4.679846] type=1400 audit(1358499344.163:8): avc: denied { create } for comm="kdevtmpfs" name="dm-7" scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=blk_file permissive=1
[ 4.680380] type=1400 audit(1358499344.163:9): avc: denied { setattr } for comm="kdevtmpfs" name="dm-7" dev="devtmpfs" ino=17583 scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=blk_file permissive=1
[ 4.681531] rockchip-dmc dmc: Get wrong frequency, Request 800000000, Current 856000000
[ 4.718290] fsck.f2fs: Info: Fix the reported corruption.
[ 4.718724] fsck.f2fs: Info: No support kernel version!
[ 4.718742] fsck.f2fs: Info: Segments per section = 1
[ 4.718758] fsck.f2fs: Info: Sections per zone = 1
[ 4.718773] fsck.f2fs: Info: sector size = 4096
[ 4.718794] fsck.f2fs: Info: total sectors = 6601211 (25785 MB)
[ 4.719220] fsck.f2fs: Info: MKFS version
[ 4.719237] fsck.f2fs: "4.19.232"
[ 4.719252] fsck.f2fs: Info: FSCK version
[ 4.719266] fsck.f2fs: from "4.19.232"
[ 4.785480] F2FS-fs (dm-7): Using encoding defined by superblock: utf8-12.1.0 with flags 0x0
[ 4.849744] F2FS-fs (dm-7): Mounted with checkpoint version = 6eaff68d
[ 4.923582] binder: 268:268 ioctl 40046210 7ff67f2ca4 returned -22
[ 4.947517] binder: 269:269 ioctl 40046210 7fc9dba354 returned -22
[ 4.961613] fscrypt: AES-256-CTS-CBC using implementation "cts(cbc-aes-ce)"
[ 4.993262] binder: 274:274 ioctl 40046210 7fff59f194 returned -22
[ 5.008938] fscrypt: AES-256-XTS using implementation "xts-aes-ce"
INF USER-TA:TA_InvokeCommandEntryPoint:2132: -------1111-----TA_InvokeCommandEntryPoint------105

[ 5.046946] apexd: This device does not support updatable APEX. Exiting
[ 5.047005] apexd: Marking APEXd as activated
[ 5.147168] binder: 280:280 ioctl 40046210 7fd3b7e074 returned -22
[ 5.301435] apexd: This device does not support updatable APEX. Exiting
[ 5.301476] apexd: Marking APEXd as ready
[ 5.365726] logd: logd reinit
[ 5.366528] logd: FrameworkListener: read() failed (Connection reset by peer)
[ 5.608556] type=1400 audit(1358499345.093:10): avc: denied { setattr } for comm="init" name="nfc" dev="dm-7" ino=118 scontext=u:r:vendor_init:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
[ 5.608668] init: Verified that /data/nfc has the encryption policy 5cd789e46b72957fc4eed86dc5105b22 v2 modes 1/4 flags 0xa
[ 5.608988] init: Inferred action different from explicit one, expected 0 but got 2
[ 5.609303] init: Verified that /data/nfc/param has the encryption policy 5cd789e46b72957fc4eed86dc5105b22 v2 modes 1/4 flags 0xa
[ 5.642322] binder: 291:291 ioctl 40046210 7ff7465f64 returned -22
[ 5.692663] binder: 298:298 ioctl 40046210 7fd37d7184 returned -22
[ 5.767798] binder: 299:299 ioctl 40046210 ffd07cf8 returned -22
[ 5.769654] binder: 299:299 ioctl 40046210 ffd07ce0 returned -22
[ 5.778116] binder: 301:301 ioctl 40046210 7fd1ddaef4 returned -22
[ 5.798776] binder: 309:309 ioctl 40046210 7fd772a2e4 returned -22
[ 5.818059] binder: 304:304 ioctl 40046210 ff8f2a68 returned -22
[ 5.818515] binder: 304:304 ioctl 40046210 ff8f2a50 returned -22
[ 5.832504] binder: 292:292 ioctl 40046210 7fe8501fb4 returned -22
[ 5.836812] binder: 292:292 ioctl 40046210 7fe85021c4 returned -22
[ 5.837186] binder: 312:312 ioctl 40046210 7fd154d794 returned -22
INF USER-TA:TA_OpenSessionEntryPoint:114: Hello Rockchip gatekeeper! rpmb :1

[ 5.849191] binder: 306:306 ioctl 40046210 ffcad1d0 returned -22
[ 5.868114] binder: 313:313 ioctl 40046210 7fc7432464 returned -22
[ 5.879745] binder: 310:310 ioctl 40046210 7fdd9ff164 returned -22
[ 5.886081] binder: 318:318 ioctl 40046210 7fd2516314 returned -22
[ 5.903361] binder: 319:319 ioctl 40046210 7fd7352c74 returned -22
[ 5.906718] healthd: BatteryCurrentNowPath not found
[ 5.906837] healthd: BatteryCycleCountPath not found
[ 5.908538] file system registered
[ 5.910328] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[ 5.910642] binder: 305:305 ioctl 40046210 ffd2fbb8 returned -22
[ 5.911062] binder: 305:305 ioctl 40046210 ffd2fba0 returned -22
[ 5.912886] using random self ethernet address
[ 5.912985] using random host ethernet address
INF USER-TA:TA_OpenSessionEntryPoint:96: Hello Rockchip Weaver! rpmb :1

[ 5.932906] binder: 320:320 ioctl 40046210 7fd495e3c4 returned -22
[ 5.933408] binder: 320:320 ioctl 40046210 7fd495e3a4 returned -22
INF [0x0] TEE-CORE:tee_rpmb_init:1217: RPMB INIT: Verify key failed. Try again.

[ 5.937962] binder: 307:307 ioctl 40046210 7fe86173f4 returned -22
ERR [0x0] TEE-CORE:tee_rpmb_init:1225: ERROR: Verify RPMB authentication key failed!

INF USER-TA:read_securedata:322: TEE_ITEM_NOT_FOUND return !

INF [0x0] TEE-CORE:tee_rpmb_init:1217: RPMB INIT: Verify key failed. Try again.

ERR [0x0] TEE-CORE:tee_rpmb_init:1225: ERROR: Verify RPMB authentication key failed!

[ 5.959358] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000058
[ 5.961146] Mem abort info:
[ 5.961410] ESR = 0x96000005
[ 5.961688] Exception class = DABT (current EL), IL = 32 bits
[ 5.962216] SET = 0, FnV = 0
[ 5.962493] EA = 0, S1PTW = 0
[ 5.962774] Data abort info:
[ 5.963027] ISV = 0, ISS = 0x00000005
[ 5.964284] CM = 0, WnR = 0
[ 5.964563] user pgtable: 4k pages, 39-bit VAs, pgdp = 0000000024ea7433
[ 5.965048] binder: 308:308 ioctl 40046210 ff9f61d8 returned -22
[ 5.965144] [0000000000000058] pgd=0000000000000000, pud=0000000000000000
[ 5.966268] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 5.966761] Modules linked in: incrementalfs
[ 5.967145] Process android.hardwar (pid: 313, stack limit = 0x00000000726bf3fb)
[ 5.967801] CPU: 4 PID: 313 Comm: android.hardwar Not tainted 4.19.232 #1
[ 5.968396] Hardware name: Rockchip RK3399 Excavator Board edp avb (Android) (DT)
[ 5.969058] pstate: 80400005 (Nzcv daif +PAN -UAO)
[ 5.969495] pc : optee_handle_rpc+0x30c/0x534
[ 5.969885] lr : optee_handle_rpc+0xbc/0x534
[ 5.970263] sp : ffffff800ee63b30
[ 5.970561] x29: ffffff800ee63b60 x28: ffffff800ee63ba8
[ 5.971032] x27: 000000000000fffe x26: dead000000000100
[ 5.971505] x25: ffffff800ee63bf8 x24: ffffffc06a2d2600
[ 5.971975] x23: ffffffc07a5b4200 x22: ffffff800ee63bc8
[ 5.972444] x21: ffffffc06a2d2380 x20: ffffff800a8000e0
[ 5.972915] x19: ffffff800ee63bd8 x18: 000000000000b67e
[ 5.973394] x17: 0000000000000000 x16: 0000000000000000
[ 5.973866] x15: 0000000000000000 x14: 0000000000200000
[ 5.974337] x13: 0000000000000800 x12: 00000000000015a6
[ 5.974814] x11: 0000000000000079 x10: ffffff8008c4f970
[ 5.975289] x9 : 0000000000000002 x8 : 0000000000000003
[ 5.975761] x7 : 0000000000000000 x6 : 0000000000000000
[ 5.976230] x5 : 0000000000000000 x4 : 0000000000000000
[ 5.976700] x3 : 0000000000000000 x2 : ffffff800ee63bc8
[ 5.977181] x1 : 0000000000000000 x0 : 0000000000000000
[ 5.977655]
[ 5.977655] PC: 0xffffff8008c4f928:
[ 5.978093] f928 a942e288 f100051f 54000bc0 b50004e8 f94002a0 97ffed06 aa0003f7 52800068
[ 5.978823] f948 910023e3 528000c1 52800022 aa1503e0 a900ffe8 a901fff8 94000145 34000ae0
[ 5.979548] f968 92800175 1400005e b9401e88 52800049 b9001a89 7100051f 54000281 f9401288
[ 5.980273] f988 f100051f 54000221 a9428288 f100051f 54000820 b5000828 52800068 a900ffe8
[ 5.980996] f9a8 b9805808 a901ffe8 97fff6c0 910023e3 528000e1 52800022 aa1503e0 9400012c
[ 5.981721] f9c8 b900169f 14000003 129fff28 b9001688 52800068 72a64008 b9000268 f0006189
[ 5.982445] f9e8 f85f83a8 f9423929 eb08013f 54000ec1 a9464ff4 a94557f6 a9445ff8 a9437bfd
[ 5.983170] fa08 9101c3ff d65f03c0 f00059c0 91105000 940e4c64 17ffffef b0005e60 f00060c1
[ 5.983897]
[ 5.983897] LR: 0xffffff8008c4f6d8:
[ 5.984333] f6d8 7100143f 540019a8 f0004388 91090108 10000089 3861690a 8b0a0929 d61f0120
[ 5.985059] f6f8 b9400661 52800022 aa1503e0 97fff60f b140041f 540000c8 910023e2 aa1f03e1
[ 5.985785] f718 aa0003f4 97fff7df 34000520 f800427f f9000a7f 140000ab 29408268 b3607d00
[ 5.986504] f738 97fff7be 140000a7 2940e268 aa0003f7 aa1f03e1 b3607d18 aa1803e0 97fff7f7
[ 5.987231] f758 b13ffc1f 54001622 b9400008 aa0003f4 51000d08 7100111f 54000368 f0004389
[ 5.987955] f778 91091929 1000008a 3868692b 8b0b094a d61f0140 b9401e88 7100051f 540011e1
[ 5.988673] f798 39408288 f100091f 54001181 910023e0 97d3dd66 f94007ea f9400be9 2a1f03e8
[ 5.989398] f7b8 b900169f a902a68a 14000086 f94007e8 d360fe89 29025269 d360fd0a 2900a26a
[ 5.990125]
[ 5.990125] SP: 0xffffff800ee63ab0:
[ 5.990560] 3ab0 6a2d2600 ffffffc0 0ee63bf8 ffffff80 00000100 dead0000 0000fffe 00000000
[ 5.991284] 3ad0 0ee63ba8 ffffff80 0ee63b60 ffffff80 08c4f758 ffffff80 0ee63b30 ffffff80
[ 5.992018] 3af0 08c4f9a8 ffffff80 80400005 00000000 6a2d2600 ffffffc0 7a5b4200 ffffffc0
[ 5.992751] 3b10 ffffffff 0000007f 6a2d2380 ffffffc0 0ee63b60 ffffff80 08c4f9a8 ffffff80
[ 5.993475] 3b30 09e0c000 00000000 00000003 00000000 00000000 00000000 00000002 00000000
[ 5.994202] 3b50 00000000 00000000 5690d900 e6714dc3 0ee63c30 ffffff80 08c4e350 ffffff80
[ 5.994928] 3b70 ffff0005 00000000 0ee63c08 ffffff80 7a5b4200 ffffffc0 6a2d2380 ffffffc0
[ 5.995652] 3b90 7a5b4238 ffffffc0 7a5b4218 ffffffc0 0ee63ba8 ffffff80 ffff0005 00000000
[ 5.996378]
[ 5.996378] X2: 0xffffff800ee63b48:
[ 5.996813] 3b48 00000002 00000000 00000000 00000000 5690d900 e6714dc3 0ee63c30 ffffff80
[ 5.997537] 3b68 08c4e350 ffffff80 ffff0005 00000000 0ee63c08 ffffff80 7a5b4200 ffffffc0
[ 5.998261] 3b88 6a2d2380 ffffffc0 7a5b4238 ffffffc0 7a5b4218 ffffffc0 0ee63ba8 ffffff80
[ 5.998988] 3ba8 ffff0005 00000000 ffffffc0 00000000 6a2d2600 00000000 00000000 00000000
[ 5.999716] 3bc8 00000000 00000000 00000000 00000000 ffff0005 ffffffc0 6a2d2600 00000000
[ 6.000440] 3be8 00000000 00000000 00000000 00000000 7a5b4238 ffffffc0 7a5b4238 ffffffc0
[ 6.001166] 3c08 00000000 e6714dc3 00000000 ffffff80 0ee63c18 ffffff80 0ee63c18 ffffff80
[ 6.001883] 3c28 5690d900 e6714dc3 0ee63ca0 ffffff80 08c4e9bc ffffff80 6a1dba00 ffffffc0
[ 6.002611]
[ 6.002611] X10: 0xffffff8008c4f8f0:
[ 6.003057] f8f0 b9001a89 340006e8 f9401289 f100053f 54000681 7100091f 54000103 d1000508
[ 6.003782] f910 91010289 f940012a b50005ca f1000508 91008129 54ffff81 a942e288 f100051f
[ 6.004507] f930 54000bc0 b50004e8 f94002a0 97ffed06 aa0003f7 52800068 910023e3 528000c1
[ 6.005232] f950 52800022 aa1503e0 a900ffe8 a901fff8 94000145 34000ae0 92800175 1400005e
[ 6.005955] f970 b9401e88 52800049 b9001a89 7100051f 54000281 f9401288 f100051f 54000221
[ 6.006679] f990 a9428288 f100051f 54000820 b5000828 52800068 a900ffe8 b9805808 a901ffe8
[ 6.007402] f9b0 97fff6c0 910023e3 528000e1 52800022 aa1503e0 9400012c b900169f 14000003
[ 6.008126] f9d0 129fff28 b9001688 52800068 72a64008 b9000268 f0006189 f85f83a8 f9423929
[ 6.008852]
[ 6.008852] X19: 0xffffff800ee63b58:
[ 6.009297] 3b58 5690d900 e6714dc3 0ee63c30 ffffff80 08c4e350 ffffff80 ffff0005 00000000
[ 6.010030] 3b78 0ee63c08 ffffff80 7a5b4200 ffffffc0 6a2d2380 ffffffc0 7a5b4238 ffffffc0
[ 6.010757] 3b98 7a5b4218 ffffffc0 0ee63ba8 ffffff80 ffff0005 00000000 ffffffc0 00000000
[ 6.011481] 3bb8 6a2d2600 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.012205] 3bd8 ffff0005 ffffffc0 6a2d2600 00000000 00000000 00000000 00000000 00000000
[ 6.012928] 3bf8 7a5b4238 ffffffc0 7a5b4238 ffffffc0 00000000 e6714dc3 00000000 ffffff80
[ 6.013652] 3c18 0ee63c18 ffffff80 0ee63c18 ffffff80 5690d900 e6714dc3 0ee63ca0 ffffff80
[ 6.014376] 3c38 08c4e9bc ffffff80 6a1dba00 ffffffc0 00000000 00000000 00000004 00000000
[ 6.015105]
[ 6.015105] X20: 0xffffff800a800060:
[ 6.015552] 0060 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.016284] 0080 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.017013] 00a0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.017743] 00c0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.018478] 00e0 00000007 00000000 00000000 00000000 00000000 ffff0000 00000002 00000001
[ 6.019208] 0100 00000001 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.019936] 0120 0000000a 00000000 09e0c000 00000000 00000200 00000000 6a145280 ffffffc0
[ 6.020661] 0140 00000000 00000000 08512b60 00000000 00000000 00000000 00000004 00000006
[ 6.021389]
[ 6.021389] X21: 0xffffffc06a2d2300:
[ 6.021834] 2300 00000000 000081ed 000003e8 000003e8 00000000 00000000 50f90e11 00000000
[ 6.022567] 2320 1cf7f366 00000000 50f90e11 00000000 1cf7f366 00000000 50f90e11 00000000
[ 6.023296] 2340 1ccf16ca 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.024021] 2360 6a2d2360 ffffffc0 6a2d2360 ffffffc0 00000000 00000000 00000000 00000000
[ 6.024744] 2380 7a670000 ffffffc0 6a2d2610 ffffffc0 6a05b390 ffffffc0 6a2d2400 ffffffc0
[ 6.025468] 23a0 00000005 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.026191] 23c0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.026915] 23e0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.027640]
[ 6.027640] X22: 0xffffff800ee63b48:
[ 6.028085] 3b48 00000002 00000000 00000000 00000000 5690d900 e6714dc3 0ee63c30 ffffff80
[ 6.028808] 3b68 08c4e350 ffffff80 ffff0005 00000000 0ee63c08 ffffff80 7a5b4200 ffffffc0
[ 6.029532] 3b88 6a2d2380 ffffffc0 7a5b4238 ffffffc0 7a5b4218 ffffffc0 0ee63ba8 ffffff80
[ 6.030255] 3ba8 ffff0005 00000000 ffffffc0 00000000 6a2d2600 00000000 00000000 00000000
[ 6.030979] 3bc8 00000000 00000000 00000000 00000000 ffff0005 ffffffc0 6a2d2600 00000000
[ 6.031702] 3be8 00000000 00000000 00000000 00000000 7a5b4238 ffffffc0 7a5b4238 ffffffc0
[ 6.032425] 3c08 00000000 e6714dc3 00000000 ffffff80 0ee63c18 ffffff80 0ee63c18 ffffff80
[ 6.033148] 3c28 5690d900 e6714dc3 0ee63ca0 ffffff80 08c4e9bc ffffff80 6a1dba00 ffffffc0
[ 6.033874]
[ 6.033874] X23: 0xffffffc07a5b4180:
[ 6.034321] 4180 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.035049] 41a0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.035774] 41c0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.036499] 41e0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.037223] 4200 7a670800 ffffffc0 7a670000 ffffffc0 08c4dee0 ffffff80 00000000 00000000
[ 6.037948] 4220 00000000 00000000 7a5b4228 ffffffc0 7a5b4228 ffffffc0 0ee63bf8 ffffff80
[ 6.038688] 4240 0ee63bf8 ffffff80 00000000 00000000 00000000 00000000 7a5b4258 ffffffc0
[ 6.039419] 4260 7a5b4258 ffffffc0 7a5b4268 ffffffc0 7a5b4268 ffffffc0 00000000 00000000
[ 6.040146]
[ 6.040146] X24: 0xffffffc06a2d2580:
[ 6.040591] 2580 6a2d2420 ffffffc0 6a2d2420 ffffffc0 08511a20 00000000 00000000 00000000
[ 6.041316] 25a0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.042040] 25c0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.042765] 25e0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.043492] 2600 7a670000 ffffffc0 6a2d2380 ffffffc0 6a05b010 ffffffc0 6a2d2388 ffffffc0
[ 6.044216] 2620 09e080e0 00000000 0a8000e0 ffffff80 00000060 00000000 00000000 00000000
[ 6.044941] 2640 00000000 00000000 00000000 00000000 00000001 00000021 00000002 00000000
[ 6.045665] 2660 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.046390]
[ 6.046390] X25: 0xffffff800ee63b78:
[ 6.046835] 3b78 0ee63c08 ffffff80 7a5b4200 ffffffc0 6a2d2380 ffffffc0 7a5b4238 ffffffc0
[ 6.047559] 3b98 7a5b4218 ffffffc0 0ee63ba8 ffffff80 ffff0005 00000000 ffffffc0 00000000
[ 6.048283] 3bb8 6a2d2600 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.049007] 3bd8 ffff0005 ffffffc0 6a2d2600 00000000 00000000 00000000 00000000 00000000
[ 6.049731] 3bf8 7a5b4238 ffffffc0 7a5b4238 ffffffc0 00000000 e6714dc3 00000000 ffffff80
[ 6.050456] 3c18 0ee63c18 ffffff80 0ee63c18 ffffff80 5690d900 e6714dc3 0ee63ca0 ffffff80
[ 6.051180] 3c38 08c4e9bc ffffff80 6a1dba00 ffffffc0 00000000 00000000 00000004 00000000
[ 6.051904] 3c58 0a800020 ffffff80 00000000 00000000 0a800000 ffffff80 6a05b380 ffffffc0
[ 6.052629]
[ 6.052629] X28: 0xffffff800ee63b28:
[ 6.053075] 3b28 08c4f9a8 ffffff80 09e0c000 00000000 00000003 00000000 00000000 00000000
[ 6.053799] 3b48 00000002 00000000 00000000 00000000 5690d900 e6714dc3 0ee63c30 ffffff80
[ 6.054523] 3b68 08c4e350 ffffff80 ffff0005 00000000 0ee63c08 ffffff80 7a5b4200 ffffffc0
[ 6.055247] 3b88 6a2d2380 ffffffc0 7a5b4238 ffffffc0 7a5b4218 ffffffc0 0ee63ba8 ffffff80
[ 6.055971] 3ba8 ffff0005 00000000 ffffffc0 00000000 6a2d2600 00000000 00000000 00000000
[ 6.056695] 3bc8 00000000 00000000 00000000 00000000 ffff0005 ffffffc0 6a2d2600 00000000
[ 6.057418] 3be8 00000000 00000000 00000000 00000000 7a5b4238 ffffffc0 7a5b4238 ffffffc0
[ 6.058143] 3c08 00000000 e6714dc3 00000000 ffffff80 0ee63c18 ffffff80 0ee63c18 ffffff80
[ 6.058869]
[ 6.058869] X29: 0xffffff800ee63ae0:
[ 6.059314] 3ae0 08c4f758 ffffff80 0ee63b30 ffffff80 08c4f9a8 ffffff80 80400005 00000000
[ 6.060038] 3b00 6a2d2600 ffffffc0 7a5b4200 ffffffc0 ffffffff 0000007f 6a2d2380 ffffffc0
[ 6.060770] 3b20 0ee63b60 ffffff80 08c4f9a8 ffffff80 09e0c000 00000000 00000003 00000000
[ 6.061498] 3b40 00000000 00000000 00000002 00000000 00000000 00000000 5690d900 e6714dc3
[ 6.062222] 3b60 0ee63c30 ffffff80 08c4e350 ffffff80 ffff0005 00000000 0ee63c08 ffffff80
[ 6.062946] 3b80 7a5b4200 ffffffc0 6a2d2380 ffffffc0 7a5b4238 ffffffc0 7a5b4218 ffffffc0
[ 6.063669] 3ba0 0ee63ba8 ffffff80 ffff0005 00000000 ffffffc0 00000000 6a2d2600 00000000
[ 6.064395] 3bc0 00000000 00000000 00000000 00000000 00000000 00000000 ffff0005 ffffffc0
[ 6.065120]
[ 6.065260] Call trace:
[ 6.065483] optee_handle_rpc+0x30c/0x534
[ 6.065839] optee_do_call_with_arg+0x1a0/0x28c
[ 6.066240] optee_invoke_func+0x19c/0x1fc
[ 6.066606] tee_ioctl_invoke+0x1c0/0x46c
[ 6.066961] tee_ioctl+0x268/0x5ac
[ 6.067262] do_vfs_ioctl+0x4c8/0x714
[ 6.067584] __arm64_sys_ioctl+0x70/0x98
[ 6.067931] el0_svc_common+0x98/0x160
[ 6.068264] el0_svc_handler+0x28/0x60
[ 6.068597] el0_svc+0x8/0xc
[ 6.068854] Code: 54000820 b5000828 52800068 a900ffe8 (b9805808)
[ 6.069392] ---[ end trace 4dcb36593b7bc6c9 ]---
[ 6.076659] Kernel panic - not syncing: Fatal exception
[ 6.077127] SMP: stopping secondary CPUs
[ 6.077531] CRU:
[ 6.077710] 00000000: 0000003b 00001101 80000000 00000108 00000007 00007f00 00000000 00000000
[ 6.078453] 00000020: 0000004b 00001101 80000000 00000108 00000007 00007f00 00000000 00000000
[ 6.079196] 00000040: 0000006b 00001301 8000031f 00000108 00000007 00007f00 00000000 00000000
[ 6.079939] 00000060: 00000064 00001403 8000031f 00000108 00000007 00007f00 00000000 00000000
[ 6.080682] 00000080: 00000064 00001301 8000031f 00000108 00000007 00007f00 00000000 00000000
[ 6.081425] 000000a0: 0000004b 00001301 8000031f 00000108 00000007 00007f00 00000000 00000000
[ 6.082178] 000000c0: 00000129 00001608 8000031f 00000108 00000007 00007f00 00000000 00000000
[ 6.082930] 000000e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.083673] 00000100: 00000100 00000606 00000140 00006808 00000083 00008580 00008320 00000141
[ 6.084416] 00000120: 00000181 00008181 00000141 00000141 00004141 00008343 00003185 00000103
[ 6.085168] 00000140: 00000477 00000300 00004a87 0000033f 00009381 00008387 00001103 00005282
[ 6.085911] 00000160: 00008247 00000187 00001784 0000001f 00000380 00000300 00000380 00000000
[ 6.086663] 00000180: 0000e380 00001200 00000200 00000200 00000200 00000200 00003f3f 00000081
[ 6.087416] 000001a0: 00000000 00000000 00004141 00000421 00008700 000002dc 00000005 00000381
[ 6.088159] 000001c0: 00000381 00000100 00000000 00000087 00000087 00000141 00000141 00008181
[ 6.088901] 000001e0: 00008320 00000007 00008f1f 00008f8f 00008f8f 00008783 00008787 00008787
[ 6.089654] 00000200: 000000cf 000000cf 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.090396] 00000220: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.091148] 00000240: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.091890] 00000260: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.092634] 00000280: 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60
[ 6.093376] 000002a0: 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60 00000000 00000000 00000000 00000000
[ 6.094129] 000002c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.094872] 000002e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.095614] 00000300: 00000080 00000080 00000202 0000006f 00000c30 000001c0 0000001d 000001c0
[ 6.096367] 00000320: 0000fff8 0000f0ff 0000c0ff 0000c130 00000040 0000e233 00000000 00000000
[ 6.097119] 00000340: 00000505 00000505 00000000 00000000 00000e04 0000000f 0000cfeb 00003f00
[ 6.097862] 00000360: 0000ef60 00000020 00000ffe 000001f0 00000000 00000f86 00000d08 00000180
[ 6.098614] 00000380: 00000010 00000000 0000003a 00000000 00000000 00000000 00000000 00000000
[ 6.099357] 000003a0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.100100] 000003c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.100842] 000003e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.101594] 00000400: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.102337] 00000420: 00000080 00004070 00000000 00000014 00000000 00000000 00000000 00000000
[ 6.103080] 00000440: 00000000 00000000 00000020 00000000 00001000 00000000 00000000 00000000
[ 6.103822] 00000460: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.104564] 00000480: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.105307] 000004a0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.106059] 000004c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.106801] 000004e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.107543] 00000500: 00000000 00000000 00640064 00000000 00000003 00000003 00000000 00000000
[ 6.108286] 00000520: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.109028] 00000540: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.109771] 00000560: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.110512] 00000580: 00000002 00000000 00000004 000008aa 00000004
[ 6.111058] PMU CRU:
[ 6.111259] 00000000: 000000a9 00001203 80000000 00000108 00000007 00007f00 00000000 00000000
[ 6.112004] 00000020: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.112748] 00000040: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.113492] 00000060: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.114236] 00000080: 0000060d 00001986 00000303 00000003 000002dc 00000200 0bb8ea60 00010014
[ 6.114980] 000000a0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.115725] 000000c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.116469] 000000e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.117213] 00000100: 00000ffc 0000fb80 0000000f 00000000 00000024 00000000 00000000 00000000
[ 6.117955] 00000120: 00000000 00000000 00000000 00000000 00000003
[ 6.118502] PMU:
[ 6.118669] 00000000: 00000000 00000000 00000000 00000000 00000000 80cf0100 80cf0100 00000000
[ 6.119422] 00000020: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.120176] 00000040: 00000000 00000000 00000000 00000000 00000000 cacf833f 00000000 00000000
[ 6.120920] 00000060: 20000678 20000678 20000678 00000010 00000000 00007e00 00000000 28800000
[ 6.121674] 00000080: 000003c0 00011940 00005dc0 000003c0 00005dc0 00000060 0000000f 00000018
[ 6.122419] 000000a0: 00000018 00000018 00000018 00000006 00000006 00005dc0 00005dc0 00005dc0
[ 6.123163] 000000c0: 00000000 00000000 00000000 00000000 00000000 00000000 3fffffff 00000000
[ 6.123908] 000000e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.124648] Kernel Offset: disabled
[ 6.124958] CPU features: 0x00000000,2000600c
[ 6.125346] Memory Limit: none
[ 6.125632] rockchip-thermal ff260000.tsadc: channal 0: temperature(38 C)
[ 6.126225] THERMAL REGS:
[ 6.126459] 00000000: 00000200 00030133 00000031 00000002 00000000 00000000 00000000 00000000
[ 6.127203] 00000020: 00000219 00000210 00000000 00000000 0000024e 00000000 00000000 00000000
[ 6.127947] 00000040: 000002a5 000002a5 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.128691] 00000060: 00000004 00000004 00000753 00000753 00000000 00000000 00000000 00000000
[ 6.129431] 00000080: 00000000 00000000
[ 6.136969] Rebooting in 5 seconds..

[END] 2023/12/18 18:42:03

你可能感兴趣的:(杂质,杂质)

Day777--【这届年轻人很懒，“但在你面前，我可以多受些麻烦。”】卖小妞的饼干
图片发自App中学时期，会因为朋友一句误会，手写三页信件解释来龙去脉，必须每天一起上学放学吃饭上洗手间，永远腻在一起才能彰显关系密切。而现在，相比每段关系都闹得轰轰烈烈，我们更喜欢顺其自然。懒得耗费大量时间去维护一段关系，懒得在与朋友产生矛盾后去辩解，懒得因为朋友做出背叛友谊的行为而愤怒诘问。不再把目光放在朋友的数量上，更在乎每一个还在身边的人是否饱含真心。我们都在期待着更舒服自然没有杂质的关系，
阳光傅雷的悲凉人生兰之猗
“翻译家死了，留下了洁白的纪念碑，留下了一颗充满大爱的心。纯真得像孩子，虔诚得像教徒，比象牙还缺少杂质。“图片发自App更多的是因为对傅雷的理解吧，这个假期，我阅读了傅的一本译作。虽然，对巴尔扎克的著作含着怯意。因为我清晰地记得许多年前读《高老头》的那种冰凉。当时读完，直感叹啊，政治上说得不错，资本主义社会真太可恶了，人与人之间确实是赤裸的金钱关系。可怜的高老头得用多少自己的血汗钱才能换来女儿的一
细读“生命答卷” 汲取精神力量木同木同
近日，新华社发表题为《一名组织部长的生命答卷——追记青海省委组织部原副部长朱治国》的文章，生动讲述了朱治国同志的恪守初心、担当奉献、廉洁奉公的先进典型事迹，作为党的干部，对党的忠诚、对人民的担当、对事业的负责，就是体现在现实的实干和无私的奉献之中。用担当书写忠诚，彰显政治本色。朱治国同志用他短暂的一生诠释了唯一的、彻底的、无条件的、不掺杂任何杂质的、没有任何水分的对党忠诚政治本色。他常说，“做党的
修炼 Joanbetty永恒
生活中很多人每天过得浑浑噩噩的，觉得对生活丧失的奋斗的方向，有时候觉得生活没有多大意义。有的人能够有条不紊的完成领导交代的任务，而有的人却因为工作量增加而忙得不知所措，这一切源于我们对时间管理出现问题。分清主次，有时我们觉得忙忙碌碌，却又不知道都忙了什么。事实上，不分主次的忙碌，常常是自以为努力的错觉，难以达到预期的目标。听过一句话，“生活的智慧，在于逐渐澄清、滤除那些不重要的杂质，而保留最重要的
亲爱的，你是我的小太阳 CICIkylin
随着年龄的增长，爱情好像变得越来越变味了，或许准确的说，不是爱情，而是婚姻。过去的时候，婚姻是两个人一起搭伙过日子。现在也有不同，高中阶段的爱情最最纯粹，就是喜欢彼此，不掺杂任何杂质。大学的生活，或许因为爱情，或许因为寂寞。大学毕业，工作稳定后，又开始了挑选结婚对象的过程中了，事业单位，国家编制，五险一金，社保，等等，房子，车子，票子一系列都成为了结婚的前提……在该谈恋爱的年龄谈恋爱，在该结婚的时
炸萝卜丸子超好吃的做法爱生活爱美食
炸萝卜丸子原料：大红萝卜400克，冬笋50克，冬菇50克，豆腐干50克，味精4克，精盐15克，淀粉15克，面粉100克，花生油750克（约耗150克），酱油5克，椒盐15克，葱、姜、香油少许。做法：1.将萝卜洗净，擦成细丝；冬菇用温水泡发好后，去蒂、杂质，洗净，切末；冬笋洗净，切末；豆腐干、葱、姜均切末，待用。2.锅内放水烧沸，下萝卜丝焯一下，捞出，在清水中浸泡1小时后捞出，沥干水分，放入盆内，将
01节，什么是听书稿写作？时代给普通人最好的赚钱机会茉莉花开Aloha
普通人也可以写出好的东西，写作赚钱，投稿赚钱。读者杂质刊登。持续写稿赚钱机会有没有？如何靠写作养活自己？举例1，有个学员开了写作店，专门帮别人写文章的店，接发言稿，个人总结什么的。有公务员，医生需要，学员在淘宝帮别人写文章，一个月有几千收入。2.还有个学员学完后辅导自己孩子语文作业，学写作教孩子，成绩提高后，班里别的孩子也来学习，每人2000，收入10万。做成一件事需要天时地利人和，新学员，投稿积
誓言心语晓阳阳
一、你过得太闲，才有时间执着在无意义的事情上，才有时间无病呻吟所谓痛苦。你看那些忙碌的人，他们的时间都花在努力上。二、所有的动力都来自内心的沸腾。如果你做不到一件事，无论是搞好关系，还是寻找爱人，还是减肥，都是因为你还没有真正想做。三、人性本就薄凉，用你的时候有多热情，不用你的时候就有多冷淡。四、水的清澈，并非因为它不含杂质，而是在于懂得沉淀；心的通透，不是因为没有杂念，而是在于明白取舍。五、不是
不粘锅也要开锅？搞清楚这3点你的锅可以多用两年猫腻食探
众所周知刚买的铁锅是一定要开锅的，这样既能把新锅的杂质弄干净，又可以防止铁锅生锈；而对于新买的不粘锅到底需不需要开锅呢？实际上不粘锅本身自带“不粘光环”，如果按照铁锅的开锅方法，用钢丝球去清洗是大错特错的，不粘锅其实不需要特意的开锅，只需要把它清洗干净即可，可以用洗洁精和软布对新买的不粘锅进行一个清洗，如果还不放心可以用洗米水浸泡，再用开水清洗干净即可。不粘锅开锅虽简单，但是在后期的使用及养护中要
干净做人，善良做事一亿三千万y
干净做人，不坑人，不骗人，不算计，不讨好。怀揣良心处世，凭借人品交友。善良做事，不虚伪，不耍滑，不昧心，不使坏。内心没有杂质，交往不会虚假。一个干净的人，以良心为行为标准，以人品为做事前提，行得正站得稳，说得出做得到，不为钱财坑人，不为利益害人。一个善良的人，以真心来帮助他人，以诚恳来对待朋友。再难不失骨气，再苦不丢尊严，帮助人不求利，受人助懂感恩。人活一世，用钱财换来感情，根本走不长远。用人品赢
美味雪莲果红枣银耳羹大卓的娘
准备:银耳1朵、红枣一把、雪莲果一个、百合一把、冰糖适量制作方法：1、银耳用水冲掉杂质，置于清水中浸泡2小时左右图片发自App2、浸泡过程中换一两次水，泡至银耳发白、胀大。3、雪莲果削皮切块！图片发自App4、将泡发好的银耳剪去根蒂，撕成小片后与冲净的红枣、百合、还有雪莲果切块一起下锅。图片发自App5、按下电饭煲煲汤功能！图片发自App6、出锅前加入冰糖搅化即可。图片发自App
我的又一个开始雲行天下
水的清澈，并非因为它不含杂质，而是在于懂得沉淀；心的通透，不是因为没有杂念，而是在于明白取舍。由于春节前后事务颇多，同时为了让自己活得更加轻松点、洒脱点，于是我选择了暂时性放弃，放弃锻练身体、放弃读书、放弃更文，总之放弃了自律，放纵了自己。其结果可想而知！今天早上醒来顿然醒悟，继而默默地送给自己一个早安寄语：“结束，找回自律，改变从今天开始”。晚下班后利用碎片化时间把一周的英文水滴阅读补齐，锻炼身
向上生长之给生活做减法读书的故事
剔除了杂志才会留下无暇之美。其实呢，剔除杂质最好的办法就是用品质去代替他。人是会知道垃圾污染自己的动物之一，清洁工每天早上都要清理人们制造。成堆的垃圾，这些有形的垃圾容易清理，而人们内心诸多烦恼，欲望，忧愁，痛苦等无形的垃圾确实不那么容易清理的。为了保持心灵家园的春节，我们必须选择勇敢，乐观，积极的思想，并且及时进行精神扫除，丢弃或扫掉拖累心灵的东西，除此之外，还可以用美德来充盈我们心灵的空间，让
20190421-《华杉讲透王阳明传习录》-学习笔记-王阳明的炼金论吴涛_虹霖餐饮品牌战略
王阳明的炼金论。为什么炼？因为金子在土壤中容易和其他杂质混合在一起。炼金，就是炼金子的纯度，减去金子的附加重量。因为金子发光，不靠份量，靠纯度，千金和1克金都是金子，虽然重量不一样。用在人身上呢就是减去人欲，恢复天理。因为人在社会中行走，特别容易沾染俗气，失去了天理，所以需要不断地去人欲，恢复人的本心。用在“为学”和“修心”上呢则是“为学”和“修心”需要同时进行，而是先后进行，一先一后，人就会失去
假如你遇到这种情况，会如何处理？笑笑13194023537
这两天也挺奇怪的，连续两天遇到顾客买到有问题的商品，昨天是因为饮料里有杂质，今天是因为商品过了保质期。昨天的那个顾客年纪大约三十岁左右，买了两三件商品，其中有一瓶饮料。他说饮料里面有个黑色的东西，他已经打开喝了几口了。这个顾客一开始是另外一位同事接待的，后来她叫我去帮忙。只听顾客说，你们这个饮料卖了很久了，我上次就看到在卖，而且价格比外面便宜很多。我就觉得很奇怪。他的言外之意就是，你们这个商品便宜
如果我是玻璃，是尘埃，是粉末梦娜小迷糊
如果我曾经有一颗深爱你的心，那你完全可以肆无忌惮。可是如果我是一块玻璃，那你一定只能伤害我一次的。因为一次，就足以摔的粉碎。如果我是一粒尘埃，那么你只能抹弑我一次的。因为一次，就会让我扬起尘埃，变得深刻。如果我是一层粉末，那么你只能看见我一次的纯粹的，因为一次，就会让我掺了杂质，变了质感。如果我是玻璃，是尘埃，是粉末，那么这些你冠之以名的童话，一定是容易推敲击碎的。如果有人总是为爱情深，那有人一定
了解一下周伶丽
白糖、红糖、冰糖三者功效有差别吗怎样吃最合适赶紧来看看吧白糖、红糖、冰糖，其实大都是从甘蔗里面提取的，都属于蔗糖。红糖是没有经过高度精炼的蔗糖，含各种矿物质元素如钙、镁、磷、铁等，比较容易变质。白糖也就是白砂糖，在红糖的处理基础之上，经过纯化、脱色，最后再去除杂质，就变成了白糖。白糖的糖含量较高，其他物质含量较少。冰糖以白砂糖为原料，经过再溶、重结晶而制成，品质纯正，不易变质。常见的方糖是用精制砂
王德峰3.2《大学》三纲领与人生三重境界（下）念念流迁
我们继续讨论《大学》中的三纲领的第三条纲领：止于至善。止于至善如阳明所说的，就是“此心纯乎天理之极”。这里强调的是“纯”，纯洁的纯，完美的人生是生命情感的纯粹，没有牵涉到由于私欲而带来的杂质，这叫“纯乎天理之极”，这样的话我们的每一份生命情感都符合天道。正如《中庸》当中所说的，《中庸》第一章有这样一句话：“天命之谓性，率性之谓道，修道之谓教。”它的意思就是说，我们的人性来自天道——“天命之谓性”；
心静如水阿钊V
宁静可以过滤生活中的浮躁,过滤出浅薄、粗陋等人性的杂质。宁静是一种气质、一种修养、一种境界、一种充满内涵的悠远。现代人品味着生活的紧张与焦灼,已很难品味到静的清芬与悟愉,都渐渐浮躁起来,可是浮躁往往不利于事情的发展。人要活得轻松自得,就要做到心静如水,不为外界之物所左右。这是一条古老的街,到处都是老旧的建筑物。老街上有一位老铁匠,由于早已没人需要打制铁器,他便改卖铁锅、斧头和拴小狗的链子。他的经营
糖醋排骨 yuanxiu
用料排骨500克葱适量姜适量蒜适量冰糖适量料酒1勺生抽2勺糖3勺香醋4勺八角2个香叶2片做法1、排骨清洗一下，去除血水和表面的杂质，直到洗排骨的水变得清澈，这样做出来排骨没有腥味；葱切成段，姜切片备用。2、锅里加水烧热，把排骨放入开水中，加点葱姜，焯烫1分钟左右直到排骨变色，然后捞出来备用。3、调一个万能糖醋汁，碗中加入1勺料酒、2勺生抽、3勺白糖、4勺香醋，搅拌至糖融化。4、然后再来炒一个糖色，
基于引导滤波的暗通道matlab,基于加权引导滤波的水下图像增强算法来自大马士革的钢
在水下环境中，由于水分子以及溶解的杂质对光线的吸收和散射作用，导致水下图像出现对比度低、噪声较大等严重的退化问题。这不仅降低了图像的整体视觉效果，而且给后续图像的自动处理和识别产生不利影响。因此，研究有效的水下图像增强算法具有重要意义。近年来，水下图像增强方法主要分为模型法和非模型法。模型法利用光照物理模型估计图像的降质模式，根据估计的结果复原降质图像。非模型法不考虑水下光学成像机理和光照机理，直
别让人生，输给了心情筠尚姿
人生不可能一尘不染，没有一点杂质，就像水清则无鱼。图片发自App人生有一点点甜，也有一点点苦，有一点点好，也有一点点坏，有一点点希望，也有一点点无奈，生活才会更生动、更美好、更韵味悠长。再好的人也不会十全十美，再美好的爱情也不可能纤尘不染，你若试着包容，就会发现这个世界并不像你以为的那样糟糕。不为模糊不清的未来担忧，只为清清楚楚的现在努力。幸福就象一道光，除了让它照在自己身上之外，有时也要让它照在
晨间日记顺着时光一起老去
南方冬天早晨的风是寒冷的，虽有一丝丝凉意，但却更能吹醒我昨夜的愚钝。回想起来，我会因为好友的微信中断而胡思乱想，但我却不会因为父母的信息中断而多想，想了想，因为你的潜意识里是认定父母是爱你的，在乎你的，关心你的，因为他们的爱是无私的，不含任何杂质的，清澈而又明晰。昨夜的争吵是他们寒了心，可是他们的爱却不会减少一丝一毫，他们像一个小孩子一样在你面前卑微着，第二天依然叫你吃饭，依然给你夹最好吃的菜放在
杜笙Tulsimer抛光树脂MB-115+MB-106UP技术参数 wangsir8888 百度 twitter 微信
高纯水终端混床树脂是在极其严格的工艺控制条件下制成的，树脂经过特别的处理，再生转型已接近极限化，故具有极高的再生效率和极低的杂质含量，并具有强的交换能力和很高的机械强度。高纯水终端混床树脂无需再生，就可广泛应用于电子工业高纯水制备；实验室高纯水；高效液相色谱用高纯水；含放射物处理；药品；半导体行业；凝结水精制以及其它各种水处理工艺的终端混床精处理。高品质的混床树脂可确保出水水质达到稳定，产水水质1
Tulsimer MB-1518——超纯水抛光树脂的技术应用 C-158 7636 413O 算法全文检索大数据
超纯水的制备和稳定性一直是相关领域极为重视的，那么超纯水中常会用到的抛光树脂技术，进口和国产对比起来究竟谁更甚一筹呢？接下来为大家分享的技术就是超纯水制备中常会用到的进口品牌：美国Tulsimer杜笙树脂中抛光树脂MB-106UP的技术参数。超纯水（Ultrapurewater）又称UP水，是指电阻率达到18MΩ*cm（25℃）的水。这种水中除了水分子外，几乎没有什么杂质，更没有细菌、病毒、含氯二
MB-106up抛光树脂，产水18兆欧的抛光树脂 Khs156721678O1 人工智能
MB-106UP是一种高阶核子级抛光树脂，由核子级强酸型阳离子T46Li和核子级强碱型阴离子A33OH按照1:2的体积比预先混合。这种树脂特别适用于超纯水系统抛光，因为它具有很高的交换容量和优越的物理特性。它适合于电子产业的生产、半导体和映像管产业、实验室激光高精仪器、医用行业等需要超纯水的领域。在核电厂中，MB-106UP树脂主要用于去除水中的痕量杂质，确保反应堆的安全运行。由于其高交换容量和优
超纯水制备，MB-106UP抛光树脂的技术解析 CYL_15876364130 大数据 java
超纯水（Ultrapurewater）又称UP水，是指电阻率达到18MΩ*cm（25℃）的水。这种水中除了水分子外，几乎没有什么杂质，更没有细菌、病毒、含氯二噁英等有机物，当然也没有人体所需的矿物质微量元素，也就是几乎去除氧和氢以外所有原子的水。可以用于超纯材料（半导体原件材料、纳米精细陶瓷材料等）应用蒸馏、去离子化、反渗透技术或其它适当的超临界精细技术的制备过程。超纯水制备主要包括以下三个阶段，
新型浓盐酸净化除铁装置的技术分解 C-158 7636 413O 深度优先
盐酸是氯化氢（HCI)的水溶液，是重要的基本化工原料，广泛用于化工原料、染料、医药、食品、印染、皮革、制糖、冶金等行业。纯盐酸为无色透明液体，工业盐酸是工业生产所得浓度为30%或36%的盐酸，因含有铁、氯等杂质而呈浅黄色。工业盐酸一般是将氯气和氢气在合成炉中燃烧生成氯化氢气体，经水吸收而成。合成炉温度很高，氯气和钢铁炉壁接触而反应，导致生成的氯化氢气体中混有三氯化铁蒸汽；这种气体在管道输送中也会引
MB-106UP——进口抛光树脂的技术优势 C-158 7636 413O 全文检索大数据
超纯水的制备和稳定性一直是相关领域极为重视的，那么超纯水中常会用到的抛光树脂技术，进口和国产对比起来究竟谁更甚一筹呢？接下来为大家分享的技术就是超纯水制备中常会用到的进口品牌：美国Tulsimer杜笙树脂中抛光树脂MB-106UP的技术参数。超纯水（Ultrapurewater）又称UP水，是指电阻率达到18MΩ*cm（25℃）的水。这种水中除了水分子外，几乎没有什么杂质，更没有细菌、病毒、含氯二
减肥困难心点灵咨询
马上夏季，今天去艾灸，医生说，红豆薏仁茶。红豆薏仁茶。起到除湿利水、通利小便、健脾养胃、润肠通便等作用。适量饮用不仅可以祛除体内的湿气，同时还可以降血压、降血脂、清利小便、调节血糖、提高免疫力、预防结石。图片发自App泡制红豆薏仁茶的方法也非常简单，把红豆和薏仁先用水洗净，再次加水浸泡三小时左右。再把冬瓜去皮切块，玉米须杂质后切段。接下来把所有材料同时放入锅中，加适量的水，烧开后即可滤汁当茶饮用。
xml解析小猪猪08 xml
1、DOM解析的步奏准备工作： 1.创建DocumentBuilderFactory的对象 2.创建DocumentBuilder对象 3.通过DocumentBuilder对象的parse(String fileName)方法解析xml文件 4.通过Document的getElem
每个开发人员都需要了解的一个SQL技巧 brotherlamp linux linux视频 linux教程 linux自学 linux资料
对于数据过滤而言CHECK约束已经算是相当不错了。然而它仍存在一些缺陷，比如说它们是应用到表上面的，但有的时候你可能希望指定一条约束，而它只在特定条件下才生效。使用SQL标准的WITH CHECK OPTION子句就能完成这点，至少Oracle和SQL Server都实现了这个功能。下面是实现方式： CREATE TABLE books ( id &
Quartz——CronTrigger触发器 eksliang quartz CronTrigger
转载请出自出处：http://eksliang.iteye.com/blog/2208295 一.概述 CronTrigger 能够提供比 SimpleTrigger 更有具体实际意义的调度方案，调度规则基于 Cron 表达式，CronTrigger 支持日历相关的重复时间间隔（比如每月第一个周一执行），而不是简单的周期时间间隔。二.Cron表达式介绍 1）Cron表达式规则表 Quartz
Informatica基础 18289753290 Informatica Monitor manager workflow Designer
1. 1）PowerCenter Designer：设计开发环境，定义源及目标数据结构；设计转换规则，生成ETL映射。 2）Workflow Manager：合理地实现复杂的ETL工作流，基于时间，事件的作业调度 3）Workflow Monitor：监控Workflow和Session运行情况，生成日志和报告 4）Repository Manager：
linux下为程序创建启动和关闭的的sh文件，scrapyd为例酷的飞上天空 scrapy
对于一些未提供service管理的程序每次启动和关闭都要加上全部路径，想到可以做一个简单的启动和关闭控制的文件下面以scrapy启动server为例，文件名为run.sh： #端口号，根据此端口号确定PID PORT=6800 #启动命令所在目录 HOME='/home/jmscra/scrapy/' #查询出监听了PORT端口
人--自私与无私永夜-极光
今天上毛概课,老师提出一个问题--人是自私的还是无私的,根源是什么? 从客观的角度来看,人有自私的行为,也有无私的
Ubuntu安装NS-3 环境脚本随便小屋 ubuntu
将附件下载下来之后解压，将解压后的文件ns3environment.sh复制到下载目录下（其实放在哪里都可以，就是为了和我下面的命令相统一）。输入命令： sudo ./ns3environment.sh >>result 这样系统就自动安装ns3的环境，运行的结果在result文件中，如果提示 com
创业的简单感受 aijuans 创业的简单感受
2009年11月9日我进入a公司实习，2012年4月26日，我离开a公司，开始自己的创业之旅。今天是2012年5月30日，我忽然很想谈谈自己创业一个月的感受。当初离开边锋时，我就对自己说：“自己选择的路，就是跪着也要把他走完”，我也做好了心理准备，准备迎接一次次的困难。我这次走出来，不管成败
如何经营自己的独立人脉 aoyouzi 如何经营自己的独立人脉
独立人脉不是父母、亲戚的人脉，而是自己主动投入构造的人脉圈。“放长线，钓大鱼”，先行投入才能产生后续产出。现在几乎做所有的事情都需要人脉。以银行柜员为例，需要拉储户，而其本质就是社会人脉，就是社交！很多人都说，人脉我不行，因为我爸不行、我妈不行、我姨不行、我舅不行……我谁谁谁都不行，怎么能建立人脉？我这里说的人脉，是你的独立人脉。以一个普通的银行柜员
JSP基础百合不是茶 jsp 注释隐式对象
1,JSP语句的声明 <%! 声明 %> 　　声明：这个就是提供java代码声明变量、方法等的场所。表达式 <%= 表达式 %> 　　这个相当于赋值，可以在页面上显示表达式的结果，程序代码段/小型指令　<% 程序代码片段 %> 2,JSP的注释
web.xml之session-config、mime-mapping bijian1013 java web.xml servlet session-config mime-mapping
session-config 1.定义： <session-config> <session-timeout>20</session-timeout> </session-config> 2.作用：用于定义整个WEB站点session的有效期限，单位是分钟。 mime-mapping 1.定义： <mime-m
互联网开放平台（1） Bill_chen 互联网 qq 新浪微博百度腾讯
现在各互联网公司都推出了自己的开放平台供用户创造自己的应用，互联网的开放技术欣欣向荣，自己总结如下： 1.淘宝开放平台(TOP) 网址：http://open.taobao.com/ 依赖淘宝强大的电子商务数据，将淘宝内部业务数据作为API开放出去，同时将外部ISV的应用引入进来。目前TOP的三条主线： TOP访问网站：open.taobao.com ISV后台：my.open.ta
【MongoDB学习笔记九】MongoDB索引 bit1129 mongodb
索引可以在任意列上建立索引索引的构造和使用与传统关系型数据库几乎一样,适用于Oracle的索引优化技巧也适用于Mongodb 使用索引可以加快查询,但同时会降低修改,插入等的性能内嵌文档照样可以建立使用索引测试数据 var p1 = { "name":"Jack", "age&q
JDBC常用API之外的总结白糖_ jdbc
做JAVA的人玩JDBC肯定已经很熟练了，像DriverManager、Connection、ResultSet、Statement这些基本类大家肯定很常用啦，我不赘述那些诸如注册JDBC驱动、创建连接、获取数据集的API了，在这我介绍一些写框架时常用的API，大家共同学习吧。 ResultSetMetaData获取ResultSet对象的元数据信息
apache VelocityEngine使用记录 bozch VelocityEngine
VelocityEngine是一个模板引擎，能够基于模板生成指定的文件代码。使用方法如下： VelocityEngine engine = new VelocityEngine();// 定义模板引擎 Properties properties = new Properties();// 模板引擎属
编程之美-快速找出故障机器 bylijinnan 编程之美
package beautyOfCoding; import java.util.Arrays; public class TheLostID { /*编程之美假设一个机器仅存储一个标号为ID的记录，假设机器总量在10亿以下且ID是小于10亿的整数，假设每份数据保存两个备份，这样就有两个机器存储了同样的数据。 1.假设在某个时间得到一个数据文件ID的列表，是
关于Java中redirect与forward的区别 chenbowen00 java servlet
在Servlet中两种实现： forward方式：request.getRequestDispatcher(“/somePage.jsp”).forward(request, response); redirect方式：response.sendRedirect(“/somePage.jsp”); forward是服务器内部重定向，程序收到请求后重新定向到另一个程序，客户机并不知
[信号与系统]人体最关键的两个信号节点 comsci 系统
如果把人体看做是一个带生物磁场的导体,那么这个导体有两个很重要的节点,第一个在头部,中医的名称叫做百汇穴, 另外一个节点在腰部,中医的名称叫做命门如果要保护自己的脑部磁场不受到外界有害信号的攻击,最简单的
oracle 存储过程执行权限 daizj oracle 存储过程权限执行者调用者
在数据库系统中存储过程是必不可少的利器，存储过程是预先编译好的为实现一个复杂功能的一段Sql语句集合。它的优点我就不多说了，说一下我碰到的问题吧。我在项目开发的过程中需要用存储过程来实现一个功能，其中涉及到判断一张表是否已经建立，没有建立就由存储过程来建立这张表。 CREATE OR REPLACE PROCEDURE TestProc IS fla
为mysql数据库建立索引 dengkane mysql 性能索引
前些时候，一位颇高级的程序员居然问我什么叫做索引，令我感到十分的惊奇，我想这绝不会是沧海一粟，因为有成千上万的开发者（可能大部分是使用MySQL的）都没有受过有关数据库的正规培训，尽管他们都为客户做过一些开发，但却对如何为数据库建立适当的索引所知较少，因此我起了写一篇相关文章的念头。最普通的情况，是为出现在where子句的字段建一个索引。为方便讲述，我们先建立一个如下的表。
学习C语言常见误区如何看懂一个程序如何掌握一个程序以及几个小题目示例 dcj3sjt126com c 算法
如果看懂一个程序，分三步 1、流程 2、每个语句的功能 3、试数如何学习一些小算法的程序尝试自己去编程解决它，大部分人都自己无法解决如果解决不了就看答案关键是把答案看懂，这个是要花很大的精力，也是我们学习的重点看懂之后尝试自己去修改程序，并且知道修改之后程序的不同输出结果的含义照着答案去敲调试错误
centos6.3安装php5.4报错 dcj3sjt126com centos6
报错内容如下: Resolving Dependencies --> Running transaction check ---> Package php54w.x86_64 0:5.4.38-1.w6 will be installed --> Processing Dependency: php54w-common(x86-64) = 5.4.38-1.w6 for
JSONP请求 flyer0126 jsonp
使用jsonp不能发起POST请求。 It is not possible to make a JSONP POST request. JSONP works by creating a <script> tag that executes Javascript from a different domain; it is not pos
Spring Security（03）——核心类简介 234390216 Authentication
核心类简介目录 1.1 Authentication 1.2 SecurityContextHolder 1.3 AuthenticationManager和AuthenticationProvider 1.3.1 &nb
在CentOS上部署JAVA服务 java--hhf java jdk centos Java服务
本文将介绍如何在CentOS上运行Java Web服务，其中将包括如何搭建JAVA运行环境、如何开启端口号、如何使得服务在命令执行窗口关闭后依旧运行第一步：卸载旧Linux自带的JDK ①查看本机JDK版本 java -version 结果如下 java version "1.6.0"
oracle、sqlserver、mysql常用函数对比[to_char、to_number、to_date] ldzyz007 oracle mysql SQL Server
oracle &n
记Protocol Oriented Programming in Swift of WWDC 2015 ningandjin protocol WWDC 2015 Swift2.0
其实最先朋友让我就这个题目写篇文章的时候，我是拒绝的，因为觉得苹果就是在炒冷饭，把已经流行了数十年的OOP中的“面向接口编程”还拿来讲，看完整个Session之后呢，虽然还是觉得在炒冷饭，但是毕竟还是加了蛋的，有些东西还是值得说说的。通常谈到面向接口编程，其主要作用是把系统设计和具体实现分离开，让系统的每个部分都可以在不影响别的部分的情况下，改变自身的具体实现。接口的设计就反映了系统
搭建 CentOS 6 服务器(15) - Keepalived、HAProxy、LVS rensanning keepalived
（一）Keepalived （1）安装 # cd /usr/local/src # wget http://www.keepalived.org/software/keepalived-1.2.15.tar.gz # tar zxvf keepalived-1.2.15.tar.gz # cd keepalived-1.2.15 # ./configure # make &a
ORACLE数据库SCN和时间的互相转换 tomcat_oracle oracle sql
SCN（System Change Number 简称 SCN）是当Oracle数据库更新后，由DBMS自动维护去累积递增的一个数字，可以理解成ORACLE数据库的时间戳，从ORACLE 10G开始，提供了函数可以实现SCN和时间进行相互转换；　　用途：在进行数据库的还原和利用数据库的闪回功能时，进行SCN和时间的转换就变的非常必要了；　　操作方法：　　1、通过dbms_f
Spring MVC 方法注解拦截器 xp9802 spring mvc
应用场景，在方法级别对本次调用进行鉴权，如api接口中有个用户唯一标示accessToken,对于有accessToken的每次请求可以在方法加一个拦截器，获得本次请求的用户，存放到request或者session域。 python中，之前在python flask中可以使用装饰器来对方法进行预处理，进行权限处理先看一个实例,使用@access_required拦截： ?