（一）NanoPi m4v2 安装 Home Assistant（含 supervisor）
一、环境
硬件：NanoPi m4v2。。。
系统：Armbian。。。（基于 Debian 11）
二、尝试的方法
-
开始直接在 docker 中拉取镜像安装，但是安装完成后，发现没有 supervisor，没法集成米家的设备；
-
直接安装 hass os 比较方便省事，直接从官网下载对应版本的镜像安装即可。但是shell没办法开启 ssh；
-
所以最终是通过 supervised 方式安装，这种本质上也是安装在 docker 中，但是根据官网的指引可以达到直接安装 hass os 的效果，而且还可以安装自己的一些其他 docker 容器。
ps：在 Home Assistant 官网查看各种安装方式 https://www.home-assistant.io/installation/
三、安装过程
进入 Home Assistant 官网安装页面 https://www.home-assistant.io/installation/，点击进入 Linux 选项卡
划到页面最下方，找到 Install Home Assistant Supervised 安装方式
点击 requirements 查看以此方式安装的要求：
- Docker CE >= 19.03
- Systemd >= 239
- NetworkManager >= 1.14.6
- AppArmor == 2.13.x (built into the kernel)
- Debian Linux Debian 11 aka Bullseye (no derivatives)
- Home Assistant OS-Agent (Only the latest release is supported)
点击 home-assistant/supervised-installer 按照指引开始正式的安装步骤：
注意：后续安装命令请用 root 用户或具有 root 权限的用户 sudo 操作
1. 安装基础环境
apt-get install \
jq \
wget \
curl \
udisks2 \
libglib2.0-bin \
network-manager \
dbus -y
2. 安装 Docker-CE
curl -fsSL get.docker.com | sh
建议使用上方命令安装 Docker-CE，如果使用其他方式安装 Docker 后，安装 supervised 时报错：
The following packages have unmet dependencies:
homeassistant-supervised : Depends: docker-ce but it is not installable
E: Unable to correct problems, you have held broken packages.
那么检查一下安装的 Docker 是否是 CE 版本或版本号>= 19.03，使用 docker version 命令查看版本信息，如下：
Client: Docker Engine - Community
Version: 20.10.5
...
Server: Docker Engine - Community
Engine:
Version: 20.10.5
3. 下载 OS-Agent
根据自己的设备架构下载最新版本OS-Agent安装包，我的是 aarch64，所以选择 os-agent_1.2.2_linux_aarch64.deb 下载即可。PS：不知道自己的架构可以输入命令 arch 查看
4. 安装 OS-Agent
按照官方指引安装：
sudo dpkg -i os-agent_1.2.2_linux_aarch64.deb
如果提示报错：
zsh: command not found: dkpg
可以用以下命令替代：
apt install ./os-agent_1.2.2_linux_aarch64.deb
安装完成后，使用以下命令测试：
gdbus introspect --system --dest io.hass.os --object-path /io/hass/os
返回结果不报错、包含接口信息等即为正常。
5. 安装 Home Assisistant Supervised Debian Package
官方给出的命令：
# 下载安装包
wget https://github.com/home-assistant/supervised-installer/releases/latest/download/homeassistant-supervised.deb
# 安装
dpkg -i homeassistant-supervised.deb
和4. 安装 OS-Agent中一样，使用以下命令替换：
apt install ./homeassistant-supervised.deb
我的安装过程中报错：
root@nanopim4v2:/mydata/pkg# sudo apt install ./homeassistant-supervised.deb
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Note, selecting 'homeassistant-supervised' instead of './homeassistant-supervised.deb'
The following additional packages will be installed:
apparmor
Suggested packages:
apparmor-profiles-extra apparmor-utils
The following NEW packages will be installed:
apparmor homeassistant-supervised
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 601 kB/607 kB of archives.
After this operation, 2,591 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 /mydata/pkg/homeassistant-supervised.deb homeassistant-supervised all 1.2.1 [5,968 B]
Get:2 http://deb.debian.org/debian bullseye/main arm64 apparmor arm64 2.13.6-10 [601 kB]
Fetched 601 kB in 1s (753 kB/s)
Preconfiguring packages ...
Selecting previously unselected package apparmor.
(Reading database ... 42354 files and directories currently installed.)
Preparing to unpack .../apparmor_2.13.6-10_arm64.deb ...
Unpacking apparmor (2.13.6-10) ...
Selecting previously unselected package homeassistant-supervised.
Preparing to unpack .../homeassistant-supervised.deb ...
[warn]
[warn] If you want more control over your own system, run
[warn] Home Assistant as a VM or run Home Assistant Core
[warn] via a Docker container.
[warn]
Adding 'diversion of /etc/NetworkManager/NetworkManager.conf to /etc/NetworkManager/NetworkManager.conf.real by homeassistant-supervised'
Adding 'diversion of /etc/NetworkManager/system-connections/default to /etc/NetworkManager/system-connections/default.real by homeassistant-supervised'
Adding 'diversion of /etc/docker/daemon.json to /etc/docker/daemon.json.real by homeassistant-supervised'
Adding 'diversion of /etc/network/interfaces to /etc/network/interfaces.real by homeassistant-supervised'
Unpacking homeassistant-supervised (1.2.1) ...
Setting up apparmor (2.13.6-10) ...
Created symlink /etc/systemd/system/sysinit.target.wants/apparmor.service → /lib/systemd/system/apparmor.service.
Reloading AppArmor profiles
Setting up homeassistant-supervised (1.2.1) ...
[info] Restarting NetworkManager
[info] Enable systemd-resolved
[info] Restarting docker service
PING version.home-assistant.io (172.67.68.90) 56(84) bytes of data.
--- version.home-assistant.io ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms
[info] Waiting for version.home-assistant.io - network interface might be down...
PING version.home-assistant.io (104.26.5.238) 56(84) bytes of data.
--- version.home-assistant.io ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms
[info] Waiting for version.home-assistant.io - network interface might be down...
PING version.home-assistant.io (104.26.4.238) 56(84) bytes of data.
64 bytes from 104.26.4.238: icmp_seq=1 ttl=52 time=294 ms
--- version.home-assistant.io ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 293.773/293.773/293.773/0.000 ms
[info] Install supervisor startup scripts
[info] Install AppArmor scripts
dpkg: error processing package homeassistant-supervised (--configure):
installed homeassistant-supervised package post-installation script subprocess returned error exit status 35
Processing triggers for man-db (2.9.4-2) ...
Errors were encountered while processing:
homeassistant-supervised
E: Sub-process /usr/bin/dpkg returned an error code (1)
至此，查找原因，发现还是 dpkg 的原因，查看 /usr/bin/dpkg 是有这个路径的，也就是说之前提示 command not found: dkpg 是配置的问题，经过网上冲浪，找到了解决办法，就是重新配置 dpkg database，运行如下命令：
sudo dpkg --configure -a
等待一段时间即可安装成功，并且 dpkg 命令也可以正常使用了。
6. 访问
等待一段时间后（10分钟左右），在浏览器中输入 设备ip:8123 即可访问Home Assistant。
7、遗留问题
不知道为什么访问 设备ip:4357 ，进入看到 Supported: Unsupported，但是可以正常接入设备使用，暂时未发现问题。
Home Assistant observer
Supervisor: Connected
Supported: Unsupported
Healthy: Healthy