在keil 4中添加stc系列芯片的方法--【sky原创】

在keil 4中添加stc系列芯片的方法：
 1、从官网下载uv3.cdb的文件
网址是： http://www.stcmcu.com/


2、下载好后把uv3.cdb文件改成STC.cdb；
3、 然后将【STC.cdb】放入【keil4】--【UV4】中；
4、有些 keil 4 可能只有【ARM】和【UV4】这两个文件夹，那么我们之前安装过 keil 3 的朋友里面找到【c51】的文件夹将其复制到
【keil 4】中，于此同时，下面这一步是很重要的，最好备份一下你的【TOOLS.INI】文件， 

[UV2]

CDB0=UV4\STC.CDB("STC")

ORGANIZATION="Microsoft"

NAME="sky", "sky"

EMAIL="[email protected]"

ARMSEL=1

BOOK0=UV4\RELEASE_NOTES.HTM("uVision Release Notes",GEN)

BOOK0=UV2\RELEASE_NOTES.HTM("uVision2 Release Notes")

BOOK1=UV2\UV2.HLP("uVision2 User's Guide")

ARMUSE=0

rem ARMUSE= 0:=Cygnus/GNU, 1:=ARM-ADS, 2:=Keil (future)

Version=V2.2

ORGANIZATION="Microsoft"

NAME="Microsoft SKY"

EMAIL="[email protected]"

 

[C166]

BOOK0=HLP\Release_Notes.htm("Release Notes",GEN)

BOOK1=HLP\License.htm("Enter License ID")

BOOK2=HLP\C166TOOLS.chm("Complete User's Guide Selection", C)

BOOK3=HLP\UV3.chm("uVision3 User's Guide")

BOOK4=HLP\GS166.PDF("uVision2 Getting Started (PDF)")

BOOK5=HLP\C166.PDF("C166 User's Guide (PDF)")

BOOK6=HLP\A166.PDF("A166 & Utilities User's Guide (PDF)")

TDRV0=MONITOR\MON166.DLL ("Keil Monitor-166 Driver")

TDRV1=OCDS\CBC166.DLL ("OCDS Driver for C16xU/H/UTAH")

TDRV2=OCDS\OCDSXC.DLL ("OCDS Driver for XC16x")

RTOS1=ARTX166.DLL ("Advanced RTX-166")

RTOS2=RTXTINY.DLL ("RTX-166 Tiny")

RTOS3=RTXFULL.DLL ("RTX-166 Full")

Version=V4.2

 

[C51]

BOOK0=HLP\RELEASE_NOTES.HTM("Release Notes")

BOOK1=HLP\GS51.PDF("uVision2 Getting Started")

BOOK2=HLP\C51.PDF("C51 User's Guide")

BOOK3=HLP\C51LIB.CHM("C51 Library Functions",C)

BOOK4=HLP\A51.PDF("Assembler/Utilities")

BOOK5=HLP\TR51.CHM("RTX51 Tiny User's Guide")

BOOK6=HLP\DBG51.CHM("uVision2 Debug Commands")

BOOK7=HLP\ISD51.CHM("ISD51 In System Debugger")

BOOK8=HLP\FlashMon51.CHM("Flash Monitor")

BOOK9=MON390\MON390.HTM("MON390: Dallas Contiguous Mode Monitor")

TDRV0=BIN\MON51.DLL ("Keil Monitor-51 Driver")

TDRV1=BIN\ISD51.DLL ("Keil ISD51 In-System Debugger")

TDRV2=BIN\MON390.DLL ("MON390: Dallas Contiguous Mode")

TDRV3=BIN\LPC2EMP.DLL ("LPC900 EPM Emulator/Programmer")

TDRV4=BIN\UL2UPSD.DLL ("ST-uPSD ULINK Driver")

RTOS1=RTXTINY.DLL ("RTX-51 Tiny")

RTOS2=RTX51.DLL ("RTX-51 Full")

Version=V7.0

PATH="D:\Keil\C51"

SN=K1DZP-5IUSH-A01UE

 

[C251]

BOOK0=HLP\RELEASE_NOTES.HTM("Release Notes")

BOOK1=HLP\GS51.PDF("uVision2 Getting Started")

BOOK2=HLP\C251.PDF("C251 User's Guide")

BOOK3=HLP\C251LIB.CHM("C251 Library Functions",C)

BOOK4=HLP\A51.PDF("Assembler/Utilities")

BOOK5=HLP\DBG251.CHM("uVision2 Debug Commands")

TDRV0=BIN\MON251.DLL ("Keil Monitor-251 Driver")

Version=V3.5

 

[ARM]

PATH="d:\Keil 4\ARM\"

VERSION=4.12

PATH1="C:\Program Files\CodeSourcery\Sourcery G++ Lite\"

TOOLPREFIX=arm-none-eabi-

CPUDLL0=SARM.DLL(TDRV0,TDRV5,TDRV6,TDRV10)                             # Drivers for ARM7/9 devices

CPUDLL1=SARMCM3.DLL(TDRV1,TDRV2,TDRV3,TDRV4,TDRV5,TDRV7,TDRV8,TDRV9)   # Drivers for Cortex-M devices

CPUDLL2=SARMCR4.DLL(TDRV7)                                             # Drivers for Cortex-R4 devices

BOOK0=HLP\RELEASE_NOTES.HTM("Release Notes",GEN)

BOOK1=HLP\ARMTOOLS.chm("Complete User's Guide Selection",C)

BOOK2=HLP\RL_RELEASE_NOTES.HTM("RTL-ARM Release Notes",GEN)

BOOK3=HLP\RVI.chm("RV Compiler Introduction",GEN)

BOOK4=C:\Program Files\CodeSourcery\Sourcery G++ Lite\share\doc\arm-2007q3-53-arm-none-eabi\pdf\gcc\gcc.pdf("GNU C Compiler",GEN)

BOOK5=C:\Program Files\CodeSourcery\Sourcery G++ Lite\share\doc\arm-2007q3-53-arm-none-eabi\pdf\as.pdf("GNU Assembler",GEN)

BOOK6=C:\Program Files\CodeSourcery\Sourcery G++ Lite\share\doc\arm-2007q3-53-arm-none-eabi\pdf\ld.pdf("GNU Linker",GEN)

BOOK7=C:\Program Files\CodeSourcery\Sourcery G++ Lite\share\doc\arm-2007q3-53-arm-none-eabi\pdf\binutils.pdf("GNU Binary Utilities",GEN)

BOOK8=Signum\Docs\SigUV3Arm.htm("Signum Systems JTAGjet Driver Documentation",GEN)

TDRV0=BIN\UL2ARM.DLL("ULINK ARM Debugger")

TDRV1=BIN\UL2CM3.DLL("ULINK Cortex Debugger")

TDRV2=BIN\AGDIRDI.DLL("RDI Interface Driver")

TDRV3=BIN\ABLSTCM.dll("Altera Blaster Cortex Debugger")

TDRV4=BIN\lmidk-agdi.dll("Stellaris ICDI")

TDRV5=Signum\SigUV3Arm.dll("Signum Systems JTAGjet")

TDRV6=Segger\JLTAgdi.dll("J-LINK / J-TRACE")

TDRV7=Segger\JL2CM3.dll("Cortex-M/R J-LINK/J-Trace")

TDRV8=STLink\ST-LINKIII-KEIL.dll ("ST-Link Debugger")

TDRV9=BIN\ULP2CM3.DLL("ULINK Pro Cortex Debugger")

TDRV10=BIN\ULP2ARM.DLL("ULINK Pro ARM Debugger")

LIC0=IK112-97SIM-W2TLL-0CM2L-0YQSZ-CCVWH

[ARMADS]

PATH="d:\Keil 4\ARM\"

PATH1="BIN40\"

CPUDLL0=SARM.DLL(TDRV0,TDRV5,TDRV6,TDRV10)                             # Drivers for ARM7/9 devices

CPUDLL1=SARMCM3.DLL(TDRV1,TDRV2,TDRV3,TDRV4,TDRV5,TDRV7,TDRV8,TDRV9)   # Drivers for Cortex-M devices

CPUDLL2=SARMCR4.DLL(TDRV7)                                             # Drivers for Cortex-R4 devices

BOOK0=HLP\RELEASE_NOTES.HTM("Release Notes",GEN)

BOOK1=HLP\ARMTOOLS.chm("Complete User's Guide Selection",C)

BOOK2=HLP\RL_RELEASE_NOTES.HTM("RTL-ARM Release Notes",GEN)

BOOK3=HLP\RVI.chm("RV Compiler Introduction",GEN)

BOOK4=Signum\Docs\SigUV3Arm.htm("Signum Systems JTAGjet Driver Documentation",GEN)

TDRV0=BIN\UL2ARM.DLL("ULINK ARM Debugger")

TDRV1=BIN\UL2CM3.DLL("ULINK Cortex Debugger")

TDRV2=BIN\AGDIRDI.DLL("RDI Interface Driver")

TDRV3=BIN\ABLSTCM.dll("Altera Blaster Cortex Debugger")

TDRV4=BIN\lmidk-agdi.dll("Stellaris ICDI")

TDRV5=Signum\SigUV3Arm.dll("Signum Systems JTAGjet")

TDRV6=Segger\JLTAgdi.dll("J-LINK / J-TRACE")

TDRV7=Segger\JL2CM3.dll("Cortex-M/R J-LINK/J-Trace")

TDRV8=STLink\ST-LINKIII-KEIL.dll ("ST-Link Debugger")

TDRV9=BIN\ULP2CM3.DLL("ULINK Pro Cortex Debugger")

TDRV10=BIN\ULP2ARM.DLL("ULINK Pro ARM Debugger")

RTOS0=Dummy.DLL("Dummy")

RTOS1=VARTXARM.DLL ("RTX Kernel") 
红色字体是keil3中的TOOLS.INI文件里面的部分内容，将其复制到keil4中的TOOLS.INI中即可，这是一个引导文件，所以才需要如此复制 
蓝色字体是你自己要输入的，必须在【UV2】下面一行输入，那是你添加的STC.cdb文件的地址
5、做好之后你就会在建立工程的时候发现 


有一个STC的选项，选中之后就可以用STC的芯片了
  


以上纯属个人经验，亲自测试过可用，欢迎大家互相分享技术经验，谢谢 

 叫我sky就好了，原创

欢迎与本人交流

新浪博客：http://blog.sina.com.cn/u/2049150530
csdn博客：http://blog.csdn.net/u011749143
博客园：http://www.cnblogs.com/sky-heaven/

新浪微博：张昺华--sky