come from http://lwn.net/Articles/206765/
Anybody who has spent any amount of time working through the Video4Linux2 API specificationwill have certainly noted that V4L2 makes heavy use of the ioctl() interface. Perhaps more than just about any other type of peripheral, video hardware has a vast number of knobs to tweak. Video streams have many parameters associated with them, and, often, there is quite a bit of processing done in the hardware. Trying to operate video hardware outside of its well-supported modes can lead to poor performance at best, and often no performance at all. So there is no alternative to exposing many of the hardware's features and quirks to the end application.
Traditionally, video drivers have included ioctl() functions of approximately the same length as a Neal Stephenson novel; while the functions often come to more satisfying conclusions than the novels, they do tend to drag a lot in the middle. So the V4L2 API was changed in 2.6.18; the interminable ioctl() function has been replaced with a large set of callbacks which implement the individual ioctl() functions. There are, in fact, 79 of them in 2.6.19-rc3. Fortunately, most drivers need not implement all - or even most - of the possible callbacks.
What has really happened is that the long ioctl() function has been moved into drivers/media/video/videodev.c. This code handles the movement of data between user and kernel space and dispatches individual ioctl() calls to the driver. To use it, the driver need only use video_ioctl2() as its ioctl() method in the video_device structure. Actually, most drivers should be able to use it as unlocked_ioctl() instead; the locking within the Video4Linux2 layer can handle it, and drivers should have proper locking in place as well.
The first callback your driver is likely to implement is:
int (*vidioc_querycap)(struct file *file, void *priv, struct v4l2_capability *cap);
This function handles the VIDIOC_QUERYCAP ioctl(), which asks a simple "who are you and what can you do?" question. Implementing it is mandatory for V4L2 drivers. In this function, as with all other V4L2 callbacks, the priv argument is the contents of file->private_data field; the usual practice is to point it at the driver's internal structure representing the device at open() time.
The driver should respond by filling in the structure cap and returning the usual "zero or negative error code" value. On successful return, the V4L2 layer will take care of copying the response back into user space.
The v4l2_capability structure (defined in <linux/videodev2.h>) looks like this:
struct v4l2_capability { __u8 driver[16]; /* i.e. "bttv" */ __u8 card[32]; /* i.e. "Hauppauge WinTV" */ __u8 bus_info[32]; /* "PCI:" + pci_name(pci_dev) */ __u32 version; /* should use KERNEL_VERSION() */ __u32 capabilities; /* Device capabilities */ __u32 reserved[4]; };
The driver field should be filled in with the name of the device driver, while the card field should have a description of the hardware behind this particular device. Not all drivers bother with the bus_info field; those that do usually use something like:
sprintf(cap->bus_info, "PCI:%s", pci_name(&my_dev));
The version field holds a version number for the driver. The capabilities field is a bitmask describing various things that the driver can do:
V4L2_CAP_VIDEO_CAPTURE: The device can capture video data.
V4L2_CAP_VIDEO_OUTPUT: The device can perform video output.
V4L2_CAP_VIDEO_OVERLAY: It can do video overlay onto the frame buffer.
V4L2_CAP_VBI_CAPTURE: It can capture raw video blanking interval data.
V4L2_CAP_VBI_OUTPUT: It can do raw VBI output.
V4L2_CAP_SLICED_VBI_CAPTURE: It can do sliced VBI capture.
V4L2_CAP_SLICED_VBI_OUTPUT: It can do sliced VBI output.
V4L2_CAP_RDS_CAPTURE: It can capture Radio Data System (RDS) data.
V4L2_CAP_TUNER: It has a computer-controllable tuner.
V4L2_CAP_AUDIO: It can capture audio data.
V4L2_CAP_RADIO: It is a radio device.
V4L2_CAP_READWRITE: It supports the read() and/or write() system calls; very few devices will support both. It makes little sense to write to a camera, normally.
V4L2_CAP_ASYNCIO: It supports asynchronous I/O. Unfortunately, the V4L2 layer as a whole does not yet support asynchronous I/O, so this capability is not meaningful.
V4L2_CAP_STREAMING: It supports ioctl()-controlled streaming I/O.
The final field (reserved) should be left alone. The V4L2 specification requires that reserved be set to zero, but, since video_ioctl2() sets the entire structure to zero, that is nicely taken care of.
A fairly typical implementation can be found in the "vivi" driver:
static int vidioc_querycap (struct file *file, void *priv, struct v4l2_capability *cap) { strcpy(cap->driver, "vivi"); strcpy(cap->card, "vivi"); cap->version = VIVI_VERSION; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; return 0; }
Given the presence of this call, one would expect that applications would use it and avoid asking specific devices to perform functions that they are not capable of. In your editor's limited experience, however, applications tend not to pay much attention to the VIDIOC_QUERYCAP call.
Another callback, which is optional and not often implemented, is:
int (*vidioc_log_status) (struct file *file, void *priv);
This function, implementing VIDIOC_LOG_STATUS, is intended to be a debugging aid for video application writers. When called, it should print information describing the current status of the driver and its hardware. This information should be sufficiently verbose to help a confused application developer figure out why the video display is coming up blank. Your editor would also recommend, however, that it be moderated with a call to printk_ratelimit() to keep it from being used to slow the system and fill the logfiles with junk.
The next installment will start in on the remaining 77 callbacks. In particular, we will begin to look at the long process of negotiating a set of operating modes with the hardware.