呼叫中心-PIX515E-20101107

 

 

呼叫中心搬家,涉及改服务器和防火墙的IP,将IP重新规划后修改防火墙配置,按以前的配置修改,访问列表里只改了IP:

access-list 108 permit tcp host 10.63.128.81 host 10.63.57.61 eq 8088
access-list 108 permit tcp host 10.63.128.82 host 10.63.57.61 eq 8088
access-list 108 permit tcp host 10.63.128.83 host 10.63.57.61 eq 8088
access-list 108 permit tcp host 10.63.128.84 host 10.63.57.61 eq 8088
access-list 108 permit tcp host 10.63.128.85 host 10.63.57.61 eq 8088
access-list 108 permit tcp host 10.63.128.81 host 10.63.57.60 eq 1433
access-list 108 permit tcp host 10.63.128.82 host 10.63.57.60 eq 1433
access-list 108 permit tcp host 10.63.128.83 host 10.63.57.60 eq 1433
access-list 108 permit tcp host 10.63.128.84 host 10.63.57.60 eq 1433
access-list 108 permit tcp host 10.63.128.85 host 10.63.57.60 eq 1433
access-list 108 permit tcp host 10.63.128.81 host 10.62.57.60 eq 3000
access-list 108 permit tcp host 10.63.128.82 host 10.62.57.60 eq 3000
access-list 108 permit tcp host 10.63.128.83 host 10.62.57.60 eq 3000
access-list 108 permit tcp host 10.63.128.84 host 10.62.57.60 eq 3000
access-list 108 permit tcp host 10.63.128.85 host 10.62.57.60 eq 3000

但是软件登陆10.63.57.60后,再次登陆进入接电话策略组时,登陆失败,提示10.63.57.60的联机失败。

去掉端口限制后,问题解决。又查了一下,服务器需要开启的端口只有这3个,于是决定不加端口限制了。

新的配置如下:

CallCentre(config)# sh conf
: Saved
:
PIX Version 6.1(4)
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password tsjKg7JHkl3qMaXK encrypted
passwd tsjKg7JHkl3qMaXK encrypted
hostname CallCentre
domain-name CallCernte.com
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 1720
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
no fixup protocol domain 53
names
access-list 108 permit icmp any any
access-list 108 permit tcp host 10.63.128.81 host 10.63.57.61
access-list 108 permit tcp host 10.63.128.82 host 10.63.57.61
access-list 108 permit tcp host 10.63.128.83 host 10.63.57.61
access-list 108 permit tcp host 10.63.128.84 host 10.63.57.61
access-list 108 permit tcp host 10.63.128.85 host 10.63.57.61
access-list 108 permit tcp host 10.63.128.81 host 10.63.57.60
access-list 108 permit tcp host 10.63.128.82 host 10.63.57.60
access-list 108 permit tcp host 10.63.128.83 host 10.63.57.60
access-list 108 permit tcp host 10.63.128.84 host 10.63.57.60
access-list 108 permit tcp host 10.63.128.85 host 10.63.57.60
access-list 108 permit tcp host 10.63.128.81 host 10.62.57.60
access-list 108 permit tcp host 10.63.128.82 host 10.62.57.60
access-list 108 permit tcp host 10.63.128.83 host 10.62.57.60
access-list 108 permit tcp host 10.63.128.84 host 10.62.57.60
access-list 108 permit tcp host 10.63.128.85 host 10.62.57.60
pager lines 24
interface ethernet0 auto
interface ethernet1 auto
mtu outside 1500
mtu inside 1500
ip address outside 10.63.57.58 255.255.255.0
ip address inside 192.168.45.100 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) 10.63.57.61 192.168.45.12 netmask 255.255.255.255 0 0
static (inside,outside) 10.63.57.60 192.168.45.13 netmask 255.255.255.255 0 0
access-group 108 in interface outside
route outside 0.0.0.0 0.0.0.0 10.63.57.251 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt noproxyarp inside
no sysopt route dnat
telnet 192.168.45.0 255.255.255.0 inside
telnet timeout 5
ssh 10.63.128.0 255.255.255.0 outside
ssh 10.63.57.0 255.255.255.0 outside
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 20
terminal width 80
Cryptochecksum:73692e6ff542924b801d6647d83b7018

你可能感兴趣的:(职场,休闲,PIX,515)