环境:centos6.7
https://github.com/vinta/awesome-python
https://github.com/PyMySQL/PyMySQL
https://github.com/kennethreitz/requests
http://flask.pocoo.org/
http://flask-json.readthedocs.org/en/latest/
http://www.pythondoc.com/flask-cache/index.html
# json_data=json.dumps(hqs,cls=__default)
# 安装Nginx
yum -y install gcc gcc-c++ autoconf automake make zlib zlib-devel openssl openssl--devel pcre pcre-devel
cd /opt
wget http://nginx.org/download/nginx-1.9.14.tar.gz
mkdir nginx
tar zxvf nginx-1.9.14.tar.gz
cd nginx-1.9.14
./configure --prefix=/opt/nginx --with-http_stub_status_module --with-http_gzip_static_module
make && make install
# 启动nginx
/opt/nginx/sbin/nginx
# 拷贝文件至远程主机
scp -r //Users/Irving/Desktop/python/stockhq/ [email protected]:/opt/
scp -r //Users/Irving/Desktop/python/stockhq/data/ [email protected]:/opt/stockhq/data/
# 升级python3
yum install gcc zlib-devel make
# 下载python
wget https://www.python.org/ftp/python/3.5.1/Python-3.5.1.tgz
解压缩、编译和安装
tar -zxvf Python-3.5.1.tgz
cd Python-3.5.1
./configure –prefix=/opt/python3
make all
make install
清除之前编译的可执行文件及配置文件。
make clean
清除所有生成的文件
make distclean
查看安装的新版本信息
/opt/python3/bin/python3 -V
做个软连接到当前用户的bin目录(注意:如果已安装了puython2.6 先删除执行 rm -rf /usr/bin/python)
ln -s /opt/python3/bin/python3 /usr/bin/python
升级了默认的python导致报错 File “/usr/bin/yum”, line 30
vim /usr/bin/yum #将!/usr/bin/python改成!/usr/bin/python2.6即可。
# 安装pip3
ln -s "/opt/python3/bin/pip3" /usr/local/bin/pip3
# 安装包
pip3 install requests pymysql sqlalchemy flask flask_json simplejson
#安装
yum install supervisor
# 查看配置信息
cat /etc/supervisord.conf [supervisord] http_port=/var/tmp/supervisor.sock ; (default is to run a UNIX domain socket server) ;http_port=127.0.0.1:9001 ; (alternately, ip_address:port specifies AF_INET) ;sockchmod=0700 ; AF_UNIX socketmode (AF_INET ignore, default 0700) ;sockchown=nobody.nogroup ; AF_UNIX socket uid.gid owner (AF_INET ignores) ;umask=022 ; (process file creation umask;default 022) logfile=/var/log/supervisor/supervisord.log ; (main log file;default $CWD/supervisord.log) logfile_maxbytes=50MB ; (max main logfile bytes b4 rotation;default 50MB) logfile_backups=10 ; (num of main logfile rotation backups;default 10) loglevel=info ; (logging level;default info; others: debug,warn) pidfile=/var/run/supervisord.pid ; (supervisord pidfile;default supervisord.pid) nodaemon=false ; (start in foreground if true;default false) minfds=1024 ; (min. avail startup file descriptors;default 1024) minprocs=200 ; (min. avail process descriptors;default 200) ;nocleanup=true ; (don't clean up tempfiles at start;default false) ;http_username=user ; (default is no username (open system)) ;http_password=123 ; (default is no password (open system)) ;childlogdir=/tmp ; ('AUTO' child log dir, default $TEMP) ;user=chrism ; (default is current user, required if root) ;directory=/tmp ; (default is not to cd during start) ;environment=KEY=value ; (key value pairs to add to environment) [supervisorctl] serverurl=unix:///var/tmp/supervisor.sock ; use a unix:// URL for a unix socket ;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket ;username=chris ; should be same as http_username if set ;password=123 ; should be same as http_password if set ;prompt=mysupervisor ; cmd line prompt (default "supervisor") ; The below sample program section shows all possible program subsection values, ; create one or more 'real' program: sections to be able to control them under ; supervisor. ;[program:theprogramname] ;command=/bin/cat ; the program (relative uses PATH, can take args) ;priority=999 ; the relative start priority (default 999) ;autostart=true ; start at supervisord start (default: true) ;autorestart=true ; retstart at unexpected quit (default: true) ;startsecs=10 ; number of secs prog must stay running (def. 10) ;startretries=3 ; max # of serial start failures (default 3) ;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2) ;stopsignal=QUIT ; signal used to kill process (default TERM) ;stopwaitsecs=10 ; max num secs to wait before SIGKILL (default 10) ;user=chrism ; setuid to this UNIX account to run the program ;log_stdout=true ; if true, log program stdout (default true) ;log_stderr=true ; if true, log program stderr (def false) ;logfile=/var/log/cat.log ; child log path, use NONE for none; default AUTO ;logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;logfile_backups=10 ; # of logfile backups (default 10) [root@iZ11fek1j6cZ etc]# cat /etc/supervisord.conf [supervisord] http_port=/var/tmp/supervisor.sock ; (default is to run a UNIX domain socket server) ;http_port=127.0.0.1:9001 ; (alternately, ip_address:port specifies AF_INET) ;sockchmod=0700 ; AF_UNIX socketmode (AF_INET ignore, default 0700) ;sockchown=nobody.nogroup ; AF_UNIX socket uid.gid owner (AF_INET ignores) ;umask=022 ; (process file creation umask;default 022) logfile=/var/log/supervisor/supervisord.log ; (main log file;default $CWD/supervisord.log) logfile_maxbytes=50MB ; (max main logfile bytes b4 rotation;default 50MB) logfile_backups=10 ; (num of main logfile rotation backups;default 10) loglevel=info ; (logging level;default info; others: debug,warn) pidfile=/var/run/supervisord.pid ; (supervisord pidfile;default supervisord.pid) nodaemon=false ; (start in foreground if true;default false) minfds=1024 ; (min. avail startup file descriptors;default 1024) minprocs=200 ; (min. avail process descriptors;default 200) ;nocleanup=true ; (don't clean up tempfiles at start;default false) ;http_username=user ; (default is no username (open system)) ;http_password=123 ; (default is no password (open system)) ;childlogdir=/tmp ; ('AUTO' child log dir, default $TEMP) ;user=chrism ; (default is current user, required if root) ;directory=/tmp ; (default is not to cd during start) ;environment=KEY=value ; (key value pairs to add to environment) [supervisorctl] serverurl=unix:///var/tmp/supervisor.sock ; use a unix:// URL for a unix socket ;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket ;username=chris ; should be same as http_username if set ;password=123 ; should be same as http_password if set ;prompt=mysupervisor ; cmd line prompt (default "supervisor") ; The below sample program section shows all possible program subsection values, ; create one or more 'real' program: sections to be able to control them under ; supervisor. ;[program:theprogramname] ;command=/bin/cat ; the program (relative uses PATH, can take args) ;priority=999 ; the relative start priority (default 999) ;autostart=true ; start at supervisord start (default: true) ;autorestart=true ; retstart at unexpected quit (default: true) ;startsecs=10 ; number of secs prog must stay running (def. 10) ;startretries=3 ; max # of serial start failures (default 3) ;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2) ;stopsignal=QUIT ; signal used to kill process (default TERM) ;stopwaitsecs=10 ; max num secs to wait before SIGKILL (default 10) ;user=chrism ; setuid to this UNIX account to run the program ;log_stdout=true ; if true, log program stdout (default true) ;log_stderr=true ; if true, log program stderr (def false) ;logfile=/var/log/cat.log ; child log path, use NONE for none; default AUTO ;logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;logfile_backups=10 ; # of logfile backups (default 10)
# 增加文件
vi /etc/supervisord.conf
[program:stockhq]
command=/opt/stockhq/data/__stockhq.py
directory=/opt/stockhq
autostart=true
autorestart=true
#保存
:qw
# 配置Nginx
#user nobody; worker_processes 1; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; #pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; #log_format main '$remote_addr - $remote_user [$time_local] "$request" ' # '$status $body_bytes_sent "$http_referer" ' # '"$http_user_agent" "$http_x_forwarded_for"'; #access_log logs/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; gzip on; server { listen 80; server_name localhost; #charset koi8-r; #access_log logs/host.access.log main; # location / { # root html; # index index.html index.htm; #} location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header HOST $http_host; proxy_set_header X-NginX-Proxy true; proxy_pass http://127.0.0.1:8080; } location ~*.(js|css)$ { root /opt/stockhq/data; expires 1h; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # #location ~ \.php$ { # root html; # fastcgi_pass 127.0.0.1:9000; # fastcgi_index index.php; # fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; # include fastcgi_params; #} # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } # another virtual host using mix of IP-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # location / { # root html; # index index.html index.htm; # } #} # HTTPS server # #server { # listen 443 ssl; # server_name localhost; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # ssl_session_cache shared:SSL:1m; # ssl_session_timeout 5m; # ssl_ciphers HIGH:!aNULL:!MD5; # ssl_prefer_server_ciphers on; # location / { # root html; # index index.html index.htm; # } #} }
#安装:
yum install tmux
#基本使用
tmux # 运行 tmu2 以256终端运行
C-b d # 返回主 shell , tmux 依旧在后台运行,里面的命令也保持运行状态
tmux ls # 显示已有tm(C-b s)
tmux attach-session -t 选择tmux
tmux new-session -s sessiona
tmux kill-session -t session-me