Qcom流程8x12
Android Bootloader - UART_DM Initialized!!!
[0] welcome to lk
[10] platform_init()
[10] target_init()
[30] Done initialization of the card
[130] Config MIPI_VIDEO_PANEL.
[140] mdss_dsi_panel_initialize: wxun: mipi_dsi.c--lane_swap=1
[140] mipi_panel_auto_detect:start
[150] otm9605A_read_reg_single: wxun, mipi_tianma_otm9605a_video_qhd.c reg=0xd202
[160] mipi_panel_auto_detect_otm9605A: lcdid=0x9605.
[160] mipi_tianma_otm9605A_panel_video_qhd_reinit: start
[170] mdss_dsi_config_reinit: lctlc: mipi_dsi.c
[330] Turn on MIPI_VIDEO_PANEL.
[340] Video lane tested successfully
[570] Backlight enable=1 failed
[570] pm8x41_get_is_cold_boot: cold boot
[570] target_pause_for_battery_charge : pon_reason is 128 cold_boot:1
[580] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
[590] Loading boot image (6486016): start
[660] Loading boot image (6486016): done
[670] ERROR: Unable to find suitable device tree for device (165/0x00010001/11/0)
[680] Using DTB entry 165/00010001/11/0 for device 165/00010001/11/0
[690] pm8x41_get_is_cold_boot: cold boot
[690] target_pause_for_battery_charge : pon_reason is 128 cold_boot:1
[700] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_vid[720] Updating device tree: start
[830] Updating device tree: done
[840] booting linux @ 0x8000, ramdisk @ 0x2000000 (459525), tags/device tree @ 0x1e00000
[840] Turn off MIPI_VIDEO_PANEL.
[840] Continuous splash enabled, keeping panel alive.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-g8218128-00704-g42fcf2d-dirty (xxx@soft111) (gcc version 4.7 (GCC) ) #5 SMP PREEMPT Mon Dec 30 21:01:18 CST 2013
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Qualcomm MSM 8610 (Flattened Device Tree), model: Qualcomm MSM 8610v2 QRD SKUAA
[ 0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-3a00000
[ 0.000000] Node qcom,msm-mem-hole removed memory 8800000-de00000
[ 0.000000] qcom,msm-rtb reserved EBI1 size 100000
[ 0.000000] memory pool 3 (start 0x1ff00000 size 100000) initialized
[ 0.000000] cma: CMA: reserved 16 MiB at 1ec00000
[ 0.000000] cma: Found qsecom_region, memory base 0, size 1 MiB
[ 0.000000] cma: CMA: reserved 4 MiB at 1e800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] IMEM DT static mapping successful
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c15c7000 s15872 r8192 d12800 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 107648
[ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_video lcm.id=0x9605
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 136MB 289MB = 425MB total
[ 0.000000] Memory: 384796k/384796k available, 51428k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xcde00000 - 0xe0000000 ( 290 MB)
[ 0.000000] vmalloc : 0xc8800000 - 0xcde00000 ( 86 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8800000 ( 136 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0c4f41c (12574 kB)
[ 0.000000] .init : 0xc0d00000 - 0xc0e12e00 (1100 kB)
[ 0.000000] .data : 0xc0e14000 - 0xc0ef8e08 ( 916 kB)
[ 0.000000] .bss : 0xc0ef8e2c - 0xc1113440 (2154 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] Console: colour dummy device 80x30
[ 0.000179] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000204] pid_max: default: 32768 minimum: 301
[ 0.000489] Security Framework initialized
[ 0.000540] SELinux: Initializing.
[ 0.000691] Mount-cache hash table entries: 512
[ 0.001985] Initializing cgroup subsys debug
[ 0.002002] Initializing cgroup subsys cpuacct
[ 0.002013] Initializing cgroup subsys freezer
[ 0.002068] CPU: Testing write buffer coherency: ok
[ 0.002564] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002652] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[ 0.005158] Setting up static identity map for 0x8a42f0 - 0x8a4354
[ 0.005194] Configuring XPU violations to be fatal errors
[ 0.005208] MSM Memory Dump table set up
[ 0.012573] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.018928] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.025256] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.025364] Brought up 4 CPUs
[ 0.025383] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.039683] dummy:
[ 0.056230] NET: Registered protocol family 16
[ 0.068751] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.070882] KPI: Bootloader start count = 55949
[ 0.070897] KPI: Bootloader end count = 84033
[ 0.070907] KPI: Bootloader display count = 66799
[ 0.070917] KPI: Bootloader load kernel count = 2449
[ 0.070929] KPI: Kernel MPM timestamp = 111969
[ 0.070939] KPI: Kernel MPM Clock frequency = 32768
[ 0.070962] socinfo_print: v8, id=165, ver=1.1, raw_id=2069, raw_ver=1, hw_plat=11, hw_plat_ver=196608
[ 0.070971] accessory_chip=0, hw_plat_subtype=0, pmic_model=65541, pmic_die_revision=131072
[ 0.085801] gpiochip_add: registered GPIOs 0 to 101 on device: msmgpio
[ 0.090649] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
[ 0.121165] 8110_s1: 500 <--> 1275 mV at 0 mV normal idle
[ 0.121853] 8110_s1_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.122531] 8110_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
[ 0.123206] 8110_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.123915] 8110_s3: 1200 <--> 1350 mV at 1200 mV normal idle
[ 0.124614] 8110_s4: 1800 <--> 2150 mV at 2150 mV normal idle
[ 0.125324] 8110_l1: 1225 mV normal idle
[ 0.126046] 8110_l2: 1200 mV normal idle
[ 0.126719] 8110_l3: 750 <--> 1275 mV at 0 mV normal idle
[ 0.127329] 8110_l3_ao: 750 <--> 1275 mV at 0 mV normal idle
[ 0.127964] 8110_l3_so: 750 <--> 1275 mV at 750 mV normal idle
[ 0.128940] 8110_l4: 1200 mV normal idle
[ 0.129601] 8110_l5: 1300 <--> 1350 mV at 1300 mV normal idle
[ 0.130280] 8110_l6: 1800 mV normal idle
[ 0.130971] 8110_l7: 2050 mV normal idle
[ 0.131682] 8110_l8: 1800 mV normal idle
[ 0.132364] 8110_l9: 2050 mV normal idle
[ 0.133083] 8110_l10: 1800 mV normal idle
[ 0.133731] 8110_l10_ao: 1800 mV normal idle
[ 0.134384] 8110_l10_so: 1800 mV normal idle
[ 0.135030] 8110_l12: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.136052] 8110_l14: 1800 mV normal idle
[ 0.136761] 8110_l15: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.137429] 8110_l16: 3000 <--> 3350 mV at 3000 mV normal idle
[ 0.138111] 8110_l17: 2900 mV normal idle
[ 0.138824] 8110_l18: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.139499] 8110_l19: 2850 mV normal idle
[ 0.140201] 8110_l20: 3075 mV normal idle
[ 0.140897] 8110_l21: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.141572] 8110_l22: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.143212] msm-thermal qcom,msm-thermal.51: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. KTM continues
[ 0.143593] vdd_restriction_reg_init:Defer vdd rstr freq init
[ 0.169397] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.169416] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.170101] msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized
[ 0.172139] 8110_s2: 900 <--> 1275 mV at 1150 mV
[ 0.172394] spm_regulator_probe: name=8110_s2, range=LV, voltage=1150000 uV, mode=AUTO, step rate=9600 uV/us
[ 0.173841] cpr_efuse_init: efuse_addr = 0xfc4b8000 (len=0x1000)
[ 0.173883] cpr_voltage_plan_init: [1] [1150000 1150000 1275000] uV
[ 0.173897] cpr_voltage_plan_init: [2] [1075000 1075000 1275000] uV
[ 0.173911] cpr_voltage_plan_init: [3] [1050000 1050000 1275000] uV
[ 0.173975] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[ 0.174020] cpr_pvs_init: [row:23] = 0xA0128513000002E0, n_bits=5, bin=11 (3)
[ 0.174035] cpr_pvs_init: pvs initial turbo voltage_= from 1275000 to 1275000
[ 0.174396] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[ 0.174446] cpr_init_cpr_efuse: [row:61] = 0x1250f115d9da8
[ 0.174466] cpr_init_cpr_efuse: disable = 0, local = 1
[ 0.174480] cpr_init_cpr_efuse: Corner[1]: ro_sel = 2, target quot = 482
[ 0.174493] cpr_init_cpr_efuse: Corner[2]: ro_sel = 2, target quot = 699
[ 0.174506] cpr_init_cpr_efuse: Corner[3]: ro_sel = 2, target quot = 949
[ 0.174563] cpr_init_cpr_parameters: CPR is enabled by default.
[ 0.174584] cpr_config: Timer count: 0x17700 (for 5000 us)
[ 0.174918] apc_corner: 0 <--> 0 mV
[ 0.177557] qup_i2c f9923000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.178822] kworker/u:1 used greatest stack depth: 6144 bytes left
[ 0.180593] qup_i2c f9927000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.182634] qup_i2c f9928000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.184964] qup_i2c f9925000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.188858] sps:sps is ready.
[ 0.190580] gdsc_vfe:
[ 0.191030] gdsc_oxili_cx:
[ 0.191660] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[ 0.193018] msm_bus_fabric fc478000.msm-mmss-noc: msmbus_coresight initialized
[ 0.194140] msm_bus_fabric fc460000.msm-sys-noc: msmbus_coresight initialized
[ 0.195021] msm_bus_fabric fc468000.msm-periph-noc: msmbus_coresight initialized
[ 0.196532] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 5120
[ 0.197258] msm_bus_fabric fc380000.msm-bimc: msmbus_coresight initialized
[ 0.229776] bio: create slab <bio-0> at 0
[ 0.230987] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
[ 0.231594] ION heap vmalloc created
[ 0.231756] ION heap kmalloc created
[ 0.231818] ION heap iommu created
[ 0.231848] ION heap qsecom created
[ 0.231884] ION heap pil_1 created at 0x0c500000 with size 1300000
[ 0.231931] ION heap pil_2 created at 0x08800000 with size 3d00000
[ 0.233401] Linux media interface: v0.10
[ 0.233494] Linux video capture interface: v2.00
[ 0.235169] msm_iommu_dev_v0: lpass_iommu enabled remote spinlock
[ 0.236332] msm_iommu_dev_v0: device lpass_iommu mapped at c88e0000, with 4 ctx banks
[ 0.238693] msm_iommu_dev_v0: device copss_iommu mapped at c8960000, with 8 ctx banks
[ 0.239502] msm_iommu_dev_v0: device mdpe_iommu mapped at c8b20000, with 2 ctx banks
[ 0.240216] msm_iommu_dev_v0: device mdps_iommu mapped at c8b40000, with 2 ctx banks
[ 0.241220] msm_iommu_dev_v0: device gfx_iommu mapped at c8b60000, with 3 ctx banks
[ 0.241664] msm_iommu_dev_v0: device vfe_iommu mapped at c8b80000, with 1 ctx banks
[ 0.242878] msm_iommu_ctx fd000000.qcom,iommu-ctx: context q6_fw using bank 0
[ 0.243067] msm_iommu_ctx fd001000.qcom,iommu-ctx: context audio_shared using bank 1
[ 0.243284] msm_iommu_ctx fd002000.qcom,iommu-ctx: context video_shared using bank 2
[ 0.243514] msm_iommu_ctx fd003000.qcom,iommu-ctx: context q6_spare using bank 3
[ 0.243726] msm_iommu_ctx fd010000.qcom,iommu-ctx: context copss_0 using bank 0
[ 0.243910] msm_iommu_ctx fd011000.qcom,iommu-ctx: context copss_1 using bank 1
[ 0.244237] msm_iommu_ctx fd012000.qcom,iommu-ctx: context copss_2 using bank 2
[ 0.244657] msm_iommu_ctx fd013000.qcom,iommu-ctx: context copss_3 using bank 3
[ 0.244846] msm_iommu_ctx fd014000.qcom,iommu-ctx: context copss_4 using bank 4
[ 0.245028] msm_iommu_ctx fd015000.qcom,iommu-ctx: context copss_5 using bank 5
[ 0.245281] msm_iommu_ctx fd016000.qcom,iommu-ctx: context copss_6 using bank 6
[ 0.245465] msm_iommu_ctx fd017000.qcom,iommu-ctx: context copss_7 using bank 7
[ 0.245724] msm_iommu_ctx fd860000.qcom,iommu-ctx: context mdpe_0 using bank 0
[ 0.245908] msm_iommu_ctx fd861000.qcom,iommu-ctx: context mdpe_1 using bank 1
[ 0.246120] msm_iommu_ctx fd870000.qcom,iommu-ctx: context mdps_0 using bank 0
[ 0.246304] msm_iommu_ctx fd871000.qcom,iommu-ctx: context mdps_1 using bank 1
[ 0.246620] msm_iommu_ctx fd880000.qcom,iommu-ctx: context gfx3d_user using bank 0
[ 0.246902] msm_iommu_ctx fd881000.qcom,iommu-ctx: context gfx3d_priv using bank 1
[ 0.247091] msm_iommu_ctx fd882000.qcom,iommu-ctx: context gfx3d_spare using bank 2
[ 0.247357] msm_iommu_ctx fd890000.qcom,iommu-ctx: context vfe0 using bank 0
[ 0.247533] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.248392] Bluetooth: Core ver 2.16
[ 0.248466] NET: Registered protocol family 31
[ 0.248476] Bluetooth: HCI device and connection manager initialized
[ 0.248493] Bluetooth: HCI socket layer initialized
[ 0.248506] Bluetooth: L2CAP socket layer initialized
[ 0.248827] Bluetooth: SCO socket layer initialized
[ 0.249268] cfg80211: Calling CRDA to update world regulatory domain
[ 0.249320] cfg80211: World regulatory domain updated:
[ 0.249332] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.249349] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.249364] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.249379] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 0.249395] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.249410] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.250067] Switching to clocksource arch_sys_counter
[ 0.303569] NET: Registered protocol family 2
[ 0.304046] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.305489] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.308755] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[ 0.309198] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.309211] TCP: reno registered
[ 0.309329] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.309452] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.309899] NET: Registered protocol family 1
[ 0.310549] Trying to unpack rootfs image as initramfs...
[ 0.353611] Freeing initrd memory: 448K
[ 0.359109] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
[ 0.360111] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
[ 0.360389] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
[ 0.361399] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
[ 0.361608] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
[ 0.362635] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
[ 0.362878] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
[ 0.363941] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
[ 0.364150] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
[ 0.365209] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
[ 0.365455] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
[ 0.366545] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
[ 0.366762] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
[ 0.367884] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
[ 0.369507] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
[ 0.374358] pil_pronto fb21b000.qcom,pronto: using secure boot
[ 0.383588] NET: Registered protocol family 27
[ 0.386207] platform qcom,msm-audio-ion.30: Driver msm-audio-ion requests probe deferral
[ 0.391410] find_cur_cpu_level: CPUs are running at an unknown rate. Defaulting to 1190400 KHz.
[ 0.391714] cpufreq_table_init: CPU: 6 scaling frequencies supported.
[ 0.392922] msm_rpmrbcpr_memalloc: Invalid num corners 4, num recmnds 3
[ 0.392954] msm_rpmrbcpr_stats: probe of fc000000.qcom,rpm-rbcpr-stats failed with error -14
[ 0.393339] msm_rpm_log_probe: OK
[ 0.405438] audit: initializing netlink socket (disabled)
[ 0.405488] type=2000 audit(0.390:1): initialized
[ 0.523299] fuse init (API version 7.18)
[ 0.523791] msgmni has been set to 792
[ 0.525900] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.525913] io scheduler noop registered
[ 0.525921] io scheduler deadline registered
[ 0.525940] io scheduler row registered
[ 0.526107] io scheduler cfq registered (default)
[ 0.526115] io scheduler test-iosched registered
[ 0.526401] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc0 incorrect owner 2
[ 0.526489] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc1 incorrect owner 5
[ 0.526579] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc2 incorrect owner 4
[ 0.526659] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc3 incorrect owner 2
[ 0.526791] gpiochip_add: registered GPIOs 572 to 575 on device: pm8110-gpio
[ 0.527108] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa3 incorrect owner 2
[ 0.527231] gpiochip_add: registered GPIOs 570 to 571 on device: pm8110-mpp
[ 0.529295] mdss_dsi_panel_init: Panel Name = TIANMA OTM9605A QHD video mode dsi panel
[ 0.529525] mdss_dsi_panel_init:977 Continuous splash flag enabled.
[ 0.529535] mdss_dsi_panel_init:989 Partial update disabled.
[ 0.529593] dsi_parse_gpio:156, Disp_en gpio not specified
[ 0.530076] mdss_register_panel: adding framebuffer device fdd00000.qcom,mdss_dsi
[ 0.562590] mdss_fb_register: FrameBuffer[0] 540x960 size=0 registered successfully!
[ 0.604406] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
[ 0.604427] AXI: get_pdata(): Error: Client name not found
[ 0.604435] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[ 0.604443] msm_serial_hsl_probe: Bus scaling is disabled
[ 0.604576] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
[ 0.604638] msm_hsl_console_setup: console setup on port #0
[ 2.165274] console [ttyHSL0] enabled
[ 2.169293] msm_serial_hsl_init: driver initialized
[ 2.177742] diagchar initialized now
[ 2.182671] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
[ 2.199504] brd: module loaded
[ 2.205336] loop: module loaded
[ 2.207873] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
[ 2.212329] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
[ 2.217851] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x0
[ 2.223490] QSEECOM: qseecom_probe: secure app region addr=0xda00000 size=0x100000
[ 2.231591] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[ 2.237903] i2c-core: driver [tabla-i2c-core] using legacy resume method
[ 2.244771] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[ 2.251554] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[ 2.258914] sps: BAM device 0xf9904000 is not registered yet.
[ 2.264153] sps:BAM 0xf9904000 is registered.
[ 2.268594] sps:BAM 0xf9904000 (va:0xc8be0000) enabled: ver:0x15, number of pipes:24
[ 2.276607] spi_qsd f9926000.spi: master is unqueued, this is deprecated
[ 2.284002] tun: Universal TUN/TAP device driver, 1.6
[ 2.288011] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 2.294294] rmnet_init: BAM devices[9]
[ 2.306285] PPP generic driver version 2.4.2
[ 2.309660] PPP BSD Compression module registered
[ 2.314235] PPP Deflate Compression module registered
[ 2.320018] PPP MPPE Compression module registered
[ 2.324036] NET: Registered protocol family 24
[ 2.328755] wcnss_wlan probed in built-in mode
[ 2.335173] msm_otg f9a55000.usb: msm_otg probe
[ 2.339109] msm_otg f9a55000.usb: OTG regs = c8942000
[ 2.346613] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
[ 2.351537] msm_otg f9a55000.usb: phy_reset: success
[ 2.357146] mbim_init: initialize 1 instances
[ 2.360917] mbim_init: Initialized 1 ports
[ 2.366869] rndis_qc_init: initialize rndis QC instance
[ 2.371745] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.377910] android_usb gadget: Number of LUNs=3
[ 2.382540] lun0: LUN: removable file: (no medium)
[ 2.387372] lun1: LUN: removable read only CD-ROM file: (no medium)
[ 2.393728] lun2: LUN: removable file: (no medium)
[ 2.398904] android_usb gadget: android_usb ready
[ 2.404708] [himax] himax_ts_init
[ 2.407022] wxun: himax_ts_probe: irq set here
[ 2.411609] [HIMAX PORTING MSG]himax_ts_probe ts->client->irq =330
[ 2.417659] wxun: himax_ts_probe: reset set here
[ 2.422368] ------------[ cut here ]------------
[ 2.426956] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[ 2.437621] autorequest GPIO-0
[ 2.440659] Modules linked in:
[ 2.443714] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[ 2.453167] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[ 2.462716] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[ 2.472353] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[ 2.482422] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c05355c8>] (himax_ts_probe+0x174/0xc64)
[ 2.492056] [<c05355c8>] (himax_ts_probe+0x174/0xc64) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[ 2.501170] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[ 2.510631] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[ 2.520008] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[ 2.529034] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[ 2.538060] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[ 2.547090] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[ 2.556465] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[ 2.565926] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[ 2.574782] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[ 2.583566] ---[ end trace 01a43b38716dad63 ]---
[ 2.910616] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 2.916552] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[ 2.940280] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 2.946212] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[ 2.970279] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 2.976210] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[ 3.000148] [TP] i2c_himax_read: i2c_read_block retry over 3
[ 3.004763] himax_ts_probe other driver has been loaded
[ 3.010055] msg26xx: msg26xx_ts_init
[ 3.013589] msg26xx: TPD probe
[ 3.016568] ------------[ cut here ]------------
[ 3.021174] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[ 3.031844] autorequest GPIO-0
[ 3.034883] Modules linked in:
[ 3.037932] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[ 3.047389] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[ 3.056940] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[ 3.066576] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[ 3.076645] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c0538984>] (tpd_probe+0x3c/0x748)
[ 3.085759] [<c0538984>] (tpd_probe+0x3c/0x748) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[ 3.094352] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[ 3.103813] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[ 3.113190] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[ 3.122216] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[ 3.131244] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[ 3.140272] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[ 3.149647] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[ 3.159108] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[ 3.167963] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[ 3.176724] ---[ end trace 01a43b38716dad64 ]---
[ 3.520285] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 3.526219] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[ 3.532492] _msg_WriteI2CSeq error -107,addr = 38
[ 3.537140] msg26xx: _msg_GetVersion ret = -107
[ 3.570277] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 3.576209] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[ 3.582483] _msg_WriteI2CSeq error -107,addr = 38
[ 3.587132] msg26xx: _msg_GetVersion ret = -107
[ 3.620278] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 3.626210] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[ 3.632482] _msg_WriteI2CSeq error -107,addr = 38
[ 3.637133] msg26xx: _msg_GetVersion ret = -107
[ 3.670147] msg26xx: may be there is not msg26xx tp
[ 3.674079] msg26xx: probe of 1-0026 failed with error 19
[ 3.679539] FTS: ft5x0x_ts_probe enter
[ 3.683256] FTS: irq = 330
[ 4.111031] FTS: --------ft5x0x_read_version---------fwversion=b,module=5d
[ 4.117493] input: ft5x0x_ts as /devices/virtual/input/input0
[ 4.280299] ft5x0x_ts 1-0038: Create proc entry success!
[ 4.285018] FTS: Firmware version = 0xb
[ 4.288914] FTS: report rate is 100Hz.
[ 4.292757] FTS: touch threshold is 48.
[ 4.296408] input: proximity as /devices/f9923000.i2c/i2c-1/1-0038/input/input1
[ 4.303622] FTS: tp_prox_setup_polled_device, err=0, poll-interval=100
[ 4.310064] Successfully added driver ft5x0x_ts
[ 4.314536] ctp_selftest_init
[ 4.317558] create_proc_entry g_ctp_selftest_proc success
[ 4.322870] ctp_upgrade_init
[ 4.325796] [elan] create_proc_entry 222 success
[ 4.330341] create_proc_entry success
[ 4.333959] ctp_if_upgrade_init
[ 4.337164] ctp_if_upgrade_init create_proc_entry 222 success
[ 4.342842] create_proc_entry success
[ 4.346465] create_proc_entry success
[ 4.350186] bma2x2_probe:
[ 4.380697] bma2x2_probe: chipid=20f8
[ 4.383534] input: accelerometer as /devices/f9925000.i2c/i2c-0/0-0018/input/input2
[ 4.391087] bma2x2_disable,start
[ 4.394861] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1401, h:m:s == 0:23:21, d/m/y = 1/0/70
[ 4.402456] qcom,qpnp-rtc qpnp-rtc-de519800: Alarm set for - h:r:s=0:0:0, d/m/y=1/0/70
[ 4.410359] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1401, h:m:s == 0:23:21, d/m/y = 1/0/70
[ 4.418864] using rtc device, qpnp_rtc, for alarms
[ 4.423200] qcom,qpnp-rtc qpnp-rtc-de519800: rtc core: registered qpnp_rtc as rtc0
[ 4.431086] qcom,qpnp-rtc qpnp-rtc-de519800: Probe success !!
[ 4.436653] i2c /dev entries driver
[ 4.446465] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[ 4.452292] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[ 4.459253] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[ 4.465934] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[ 4.473374] s5k4e1_init_module:153
[ 4.476436] s5k4e1_init_module:158 rc -19
[ 4.480972] zgc2235_init_module:141
[ 4.483898] zgc2235_init_module:146 rc -19
[ 4.487662] msm_sensor_i2c_probe gc2235_i2c_probe called
[ 4.492945] msm_sensor_i2c_probe: of_node exisists
[ 4.497528] msm_sensor_get_dt_data qcom,sensor-name gc2235, rc 0
[ 4.503709] msm_sensor_get_dt_data qcom,sensor-mode 0, rc 0
[ 4.509244] msm_sensor_get_dt_data qcom,sensor-position 1, rc 0
[ 4.515166] msm_sensor_get_dt_data qcom,mount-angle 270, rc 0
[ 4.520894] msm_sensor_get_dt_data qcom,cci-master 0, rc 0
[ 4.526345] msm_sensor_get_sub_module_index:75 src_node NULL
[ 4.532005] msm_sensor_get_sub_module_index:92 eeprom src_node NULL
[ 4.538252] msm_sensor_get_sub_module_index qcom,led flash cell index 1, rc 0
[ 4.545378] msm_sensor_get_sub_module_index csiphy_core[0] = 1
[ 4.551191] msm_sensor_get_sub_module_index csid_core[0] = 1
[ 4.556816] msm_sensor_get_dt_csi_data qcom,csi-lane-assign e4, rc 0
[ 4.563169] msm_sensor_get_dt_csi_data qcom,csi-lane-mask 3, rc 0
[ 4.569226] msm_sensor_get_dt_vreg_data qcom,cam-vreg-name count 3
[ 4.575410] msm_sensor_get_dt_vreg_data reg_name[0] = cam_vdig
[ 4.581224] msm_sensor_get_dt_vreg_data reg_name[1] = cam_vio
[ 4.586934] msm_sensor_get_dt_vreg_data reg_name[2] = cam_vana
[ 4.592770] msm_sensor_get_dt_vreg_data cam_vreg[0].type = 0
[ 4.598391] msm_sensor_get_dt_vreg_data cam_vreg[1].type = 0
[ 4.604053] msm_sensor_get_dt_vreg_data cam_vreg[2].type = 0
[ 4.609678] msm_sensor_get_dt_vreg_data cam_vreg[0].min_voltage = 1800000
[ 4.616467] msm_sensor_get_dt_vreg_data cam_vreg[1].min_voltage = 1800000
[ 4.623236] msm_sensor_get_dt_vreg_data cam_vreg[2].min_voltage = 2850000
[ 4.629991] msm_sensor_get_dt_vreg_data cam_vreg[0].max_voltage = 1800000
[ 4.636778] msm_sensor_get_dt_vreg_data cam_vreg[1].max_voltage = 1800000
[ 4.643549] msm_sensor_get_dt_vreg_data cam_vreg[2].max_voltage = 2850000
[ 4.650322] msm_sensor_get_dt_vreg_data cam_vreg[0].op_mode = 200000
[ 4.656637] msm_sensor_get_dt_vreg_data cam_vreg[1].op_mode = 200000
[ 4.662994] msm_sensor_get_dt_vreg_data cam_vreg[2].op_mode = 80000
[ 4.669260] msm_sensor_get_dt_data gpio count 3
[ 4.673769] msm_sensor_get_dt_data gpio_array[0] = 13
[ 4.678782] msm_sensor_get_dt_data gpio_array[1] = 15
[ 4.683857] msm_thermal: Limiting cpu0 max frequency to 787200
[ 4.689927] msm_sensor_get_dt_data gpio_array[2] = 85
[ 4.694917] msm_thermal: Limiting cpu1 max frequency to 787200
[ 4.700538] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].gpio = 13
[ 4.700656] msm_thermal: Limiting cpu2 max frequency to 787200
[ 4.700808] msm_thermal: Limiting cpu3 max frequency to 787200
[ 4.718856] cpr_irq_handler: IRQ_STATUS = 0x45
[ 4.723250] cpr_scale: last_volt[corner:2] = 1050000 uV
[ 4.723269] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].gpio = 15
[ 4.723281] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].gpio = 85
[ 4.723295] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].flags = 1
[ 4.723306] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].flags = 0
[ 4.723316] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].flags = 0
[ 4.723330] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].label = CAMIF_MCLK
[ 4.723344] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].label = CAM_RESET
[ 4.723357] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].label = CAM_STANDBY
[ 4.723379] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 15
[ 4.723391] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 85
[ 4.723415] msm_sensor_get_dt_actuator_data qcom,actuator-cam-name 0, rc -22
[ 4.723431] msm_sensor_get_dt_data qcom,misc_regulator (null), rc -22
[ 4.723445] msm_sensor_power_up:991
[ 4.723478] msm_sensor_power_up index 0
[ 4.723486] msm_sensor_power_up type 2
[ 4.734966] msm_sensor_power_up index 1
[ 4.734975] msm_sensor_power_up type 2
[ 4.746412] msm_sensor_power_up index 2
[ 4.746421] msm_sensor_power_up type 2
[ 4.757781] msm_sensor_power_up index 3
[ 4.757790] msm_sensor_power_up type 0
[ 4.763879] msm_sensor_power_up index 4
[ 4.763888] msm_sensor_power_up type 1
[ 4.810162] msm_sensor_power_up index 5
[ 4.810171] msm_sensor_power_up type 1
[ 4.857623] cpr_scale: Down: cpr status = 0x000036b9 (error_steps=14)
[ 4.860160] msm_sensor_power_up index 6
[ 4.860169] msm_sensor_power_up type 1
[ 4.871596] cpr_scale: [corn:2] @ floor: 1050000 <= 1050000: NACK
[ 4.910160] msm_sensor_power_up index 7
[ 4.912955] msm_sensor_power_up type 1
[ 4.960153] msm_sensor_power_up index 8
[ 4.962948] msm_sensor_power_up type 3
[ 4.966988] qup_i2c f9928000.i2c: QUP: I2C status flags :0x1363c8, irq:132
[ 4.973567] qup_i2c f9928000.i2c: I2C slave addr:0x21 not connected
[ 4.979816] msm_sensor_match_id: gc2235: read id failed
[ 4.985025] msm_sensor_power_up:1095 match id failed rc -107
[ 4.990662] msm_sensor_power_up:1102 failed
[ 4.994806] msm_sensor_power_up index 8
[ 4.998624] msm_sensor_power_up type 3
[ 5.002378] msm_sensor_power_up index 7
[ 5.006177] msm_sensor_power_up type 1
[ 5.050181] msm_sensor_power_up index 6
[ 5.052976] msm_sensor_power_up type 1
[ 5.100159] msm_sensor_power_up index 5
[ 5.102954] msm_sensor_power_up type 1
[ 5.150159] msm_sensor_power_up index 4
[ 5.152954] msm_sensor_power_up type 1
[ 5.200189] msm_sensor_power_up index 3
[ 5.202983] msm_sensor_power_up type 0
[ 5.212763] msm_sensor_power_up index 2
[ 5.215558] msm_sensor_power_up type 2
[ 5.230619] msm_sensor_power_up index 1
[ 5.233415] msm_sensor_power_up type 2
[ 5.248501] msm_sensor_power_up index 0
[ 5.251328] msm_sensor_power_up type 2
[ 5.266395] msm_sensor_i2c_probe gc2235 power up failed
[ 5.270619] gc2235: probe of 6-0078 failed with error -107
[ 5.280557] lirc_dev: IR Remote Control driver registered, major 241
[ 5.285961] IR NEC protocol handler initialized
[ 5.290643] IR RC5(x) protocol handler initialized
[ 5.295249] IR RC6 protocol handler initialized
[ 5.299762] IR JVC protocol handler initialized
[ 5.304303] IR Sony protocol handler initialized
[ 5.308877] IR RC5 (streamzap) protocol handler initialized
[ 5.314455] IR SANYO protocol handler initialized
[ 5.319120] IR MCE Keyboard/mouse protocol handler initialized
[ 5.324957] IR LIRC bridge handler initialized
[ 5.330203] BMS: qpnp_bms_init: QPNP BMS INIT
[ 5.333813] spmi qpnp-bms-de519600: Driver qcom,qpnp-bms requests probe deferral
[ 5.341327] spmi qpnp-charger-de518800: Driver qcom,qpnp-charger requests probe deferral
[ 5.388243] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 5.397377] cpuidle: using governor ladder
[ 5.401389] cpuidle: using governor menu
[ 5.404398] sdhci: Secure Digital Host Controller Interface driver
[ 5.410531] sdhci: Copyright(c) Pierre Ossman
[ 5.415484] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.421072] AXI: get_pdata(): Error: Client name not found
[ 5.425957] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[ 5.435036] mmc0: no vmmc regulator found
[ 5.440522] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
[ 5.446576] AXI: get_pdata(): Error: Client name not found
[ 5.451730] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[ 5.461089] mmc1: no vmmc regulator found
[ 5.466534] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
[ 5.474843] zram: Created 1 device(s) ...
[ 5.482828] ashmem: initialized
[ 5.485104] logger: created 256K log 'log_main'
[ 5.491628] logger: created 256K log 'log_events'
[ 5.497451] logger: created 256K log 'log_radio'
[ 5.503219] logger: created 256K log 'log_system'
[ 5.513808] sps:BAM 0xf9a44000 is registered.
[ 5.518988] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
[ 5.529730] PMIC@SID0 Power-on reason: Triggered from KPD (power key press) and 'cold' boot
[ 5.537482] input: qpnp_pon as /devices/virtual/input/input3
[ 5.543741] PMIC@SID0: PM8110 v2.0 options: 0, 0, 0, 0
[ 5.548253] coresight-fuse fc4be024.fuse: Fuse initialized
[ 5.554072] coresight-cti fc310000.cti: CTI initialized
[ 5.558734] coresight-cti fc311000.cti: CTI initialized
[ 5.563960] coresight-cti fc312000.cti: CTI initialized
[ 5.569181] coresight-cti fc313000.cti: CTI initialized
[ 5.574374] coresight-cti fc314000.cti: CTI initialized
[ 5.579583] coresight-cti fc315000.cti: CTI initialized
[ 5.584818] coresight-cti fc316000.cti: CTI initialized
[ 5.590021] coresight-cti fc317000.cti: CTI initialized
[ 5.595259] coresight-cti fc318000.cti: CTI initialized
[ 5.600462] coresight-cti fc351000.cti: CTI initialized
[ 5.605638] coresight-cti fc352000.cti: CTI initialized
[ 5.610859] coresight-cti fc353000.cti: CTI initialized
[ 5.616018] coresight-cti fc354000.cti: CTI initialized
[ 5.621093] mmc0: BKOPS_EN bit = 0
[ 5.621339] coresight-cti fc335000.cti: CTI initialized
[ 5.621565] coresight-cti fc338000.cti: CTI initialized
[ 5.621800] coresight-cti fc33c000.cti: CTI initialized
[ 5.622019] coresight-cti fc360000.cti: CTI initialized
[ 5.622706] coresight-csr fc301000.csr: CSR initialized
[ 5.654257] coresight-tmc fc326000.tmc: Byte Counter feature enabled
[ 5.659664] sps:BAM 0xfc37c000 is registered.
[ 5.664273] coresight-tmc fc326000.tmc: TMC initialized
[ 5.670165] coresight-tmc fc325000.tmc: TMC initialized
[ 5.675592] coresight-tpiu fc320000.tpiu: seta gpios not specified
[ 5.680795] coresight-tpiu fc320000.tpiu: setb gpios not specified
[ 5.687066] coresight-tpiu fc320000.tpiu: TPIU initialized
[ 5.692485] mmc0: new HS200 MMC card at address 0001
[ 5.693152] coresight-funnel fc323000.funnel: FUNNEL initialized
[ 5.693372] coresight-funnel fc321000.funnel: FUNNEL initialized
[ 5.693587] coresight-funnel fc322000.funnel: FUNNEL initialized
[ 5.693805] coresight-funnel fc355000.funnel: FUNNEL initialized
[ 5.694500] coresight-replicator fc324000.replicator: REPLICATOR initialized
[ 5.695397] coresight-stm fc302000.stm: STM initialized
[ 5.696130] coresight-hwevent fd820018.hwevent: Hardware Event driver initialized
[ 5.697153] coresight-etm fc34c000.etm: ETM initialized
[ 5.746663] coresight-etm fc34d000.etm: ETM initialized
[ 5.751619] mmcblk0: mmc0:0001 H4G1d 3.64 GiB
[ 5.752095] coresight-etm fc34e000.etm: ETM initialized
[ 5.752594] coresight-etm fc34f000.etm: ETM initialized
[ 5.753411] coresight-audio-etm audio_etm0.1: Audio ETM initialized
[ 5.754124] coresight-modem-etm modem_etm0.2: Modem ETM initialized
[ 5.754833] coresight-wcn-etm wcn_etm0.3: Wireless ETM initialized
[ 5.755527] coresight-rpm-etm rpm_etm0.4: RPM ETM initialized
[ 5.757176] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 5.757205] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 5.768174] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
[ 5.769006] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
[ 5.770221] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[ 5.770814] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[ 5.775174] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 5.775668] Netfilter messages via NETLINK v0.30.
[ 5.775788] nf_conntrack version 0.5.0 (6339 buckets, 25356 max)
[ 5.776914] ctnetlink v0.93: registering with nfnetlink.
[ 5.777442] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 5.777454] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 5.777867] xt_time: kernel timezone is -0000
[ 5.778494] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.778957] arp_tables: (C) 2002 David S. Miller
[ 5.779060] TCP: cubic registered
[ 5.780373] NET: Registered protocol family 10
[ 5.785300] Mobile IPv6
[ 5.785363] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 5.785659] IPv6 over IPv4 tunneling driver
[ 5.786610] NET: Registered protocol family 17
[ 5.786747] Bridge firewalling registered
[ 5.786771] Ebtables v2.0 registered
[ 5.917559] Bluetooth: RFCOMM TTY layer initialized
[ 5.922393] Bluetooth: RFCOMM socket layer initialized
[ 5.922434] mmcblk0rpmb: mmc0:0001 H4G1d partition 3 4.00 MiB
[ 5.926019] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22
[ 5.942371] Bluetooth: RFCOMM ver 1.11
[ 5.946013] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.951337] Bluetooth: BNEP filters: protocol multicast
[ 5.956520] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 5.963090] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[ 5.970089] Registering SWP/SWPB emulation handler
[ 5.983212] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 5.989708] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[ 5.998335] input: gpio-keys as /devices/gpio_keys.60/input/input4
[ 6.000281] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[ 6.000313] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[ 6.000669] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[ 6.000680] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[ 6.000703] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[ 6.000822] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 6.000843] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.006152] batfet:
[ 6.017919] msm_otg f9a55000.usb: USB in low power mode
[ 6.018086] qcom,qpnp-charger:qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 0, dc = 0 b_health = 0 batt_present = 7
[ 6.051927] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[ 6.083722] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[ 6.091305] qcom,qpnp-rtc qpnp-rtc-de519800: setting system clock to 1970-01-01 00:23:23 UTC (1403)
[ 6.103078] clock_late_init: Removing enables held for handed-off clocks
[ 6.113602] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[ 6.123067] ALSA device list:
[ 6.125008] No soundcards foun 6.129302] Freeing init memory: 72K
[ 6.163710] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[ 6.174352] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[ 6.181926] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[ 6.221390] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[ 6.228731] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[ 6.237070] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[ 6.245304] msm_thermal: Max frequency reset for cpu0
[ 6.252077] msm_thermal: Max frequency reset for cpu1
[ 6.256394] msm_thermal: Max frequency reset for cpu2
[ 6.261338] msm_thermal: Max frequency reset for cpu3
[ 6.284134] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[ 6.291486] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[ 6.304028] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[ 6.351221] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[ 6.358522] BMS: qpnp_bms_probe: probe success: soc =100 vbatt = 3944247 ocv = 4067055 r_sense_uohm = 9406 warm_reset = 0
[ 6.369867] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 6.377271] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.384251] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[ 6.394135] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 6.400479] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 6.408303] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.426046] type=1403 audit(1403.820:2): policy loaded auid=4294967295 ses=4294967295
[ 6.433092] SELinux: Loaded policy from (null)
[ 6.442620] init: /init.qcom.rc: 259: ignored duplicate definition of service 'usbhub_init'
[ 6.450659] init: /init.qcom.rc: 672: invalid command '/system/bin/log'
[ 6.458691] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[ 6.469504] init: invalid uid 'fm_radio'
[ 6.566806] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[ 7.034116] init: cannot open '/initlogo.rle'
[ 7.142372] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1
[ 7.354209] EXT4-fs (mmcblk0p22): recovery complete
[ 7.359025] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 7.436895] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
[ 7.484297] e2fsck used greatest stack depth: 5328 bytes left
[ 7.489069] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[ 7.493649] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 1008/131072 files, 49696/524288 blocks
[ 7.511078] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
[ 7.520232] init used greatest stack depth: 5212 bytes left
[ 7.537152] EXT4-fs (mmcblk0p14): recovery complete
[ 7.541926] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1
[ 7.550072] EXT4-fs (mmcblk0p21): <<<<<wzg Opt_gid
[ 7.559584] EXT4-fs (mmcblk0p21): recovery complete
[ 7.564420] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: gid=1015
[ 7.571829] SELinux: Context u:object_r:blinkfeed_file:s0 is not valid (left unmapped).
[ 7.589759] EXT4-fs (mmcblk0p13): recovery complete
[ 7.594596] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: barrier=1
[ 7.656489] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
[ 7.666456] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
[ 7.684521] pil-q6v5-lpass fe200000.qcom,lpass: adsp: loading from 0x0c500000 to 0x0d200000
[ 7.892670] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset
[ 7.945000] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Power/Clock ready interrupt received
[ 7.958549] pil-q6v5-lpass fe200000.qcom,lpass: Subsystem error monitoring/handling services are up
[ 7.967536] apr_tal:Q6 Is Up
[ 7.969981] diag: In diag_send_msg_mask_update, invalid status 0
[ 7.969992] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 7.970333] adsp-loader qcom,msm-adsp-loader.29: adsp_loader_do: Q6/ADSP image is loaded
[ 7.970448] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 7.972599] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 8.005556] diag: In diag_send_log_mask_update, invalid status 0
[ 8.322403] wcnss_wlan triggered by userspace
[ 8.350716] wcnss_trigger_config: adc get failed
[ 8.358092] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[ 8.366647] pil_pronto fb21b000.qcom,pronto: wcnss: loading from 0x0d200000 to 0x0d6ee000
[ 8.372794] init: cannot find '/system/bin/nac_server', disabling 'nac_server'
[ 8.383030] init: cannot find '/system/bin/qrngd', disabling 'qrngd'
[ 8.524964] init: cannot find '/system/bin/wiperiface', disabling 'wiperiface'
[ 8.535209] init: cannot find '/system/bin/ssr_diag', disabling 'ssr_diag'
shell@msm8610:/ $ [ 8.678736] cp used greatest stack depth: 5068 bytes left
[ 9.413808] diag: In diag_send_msg_mask_update, invalid status 0
[ 9.418623] diag: In diag_send_log_mask_update, invalid status 0
[ 9.437502] init: untracked pid 269 exited
[ 9.444431] enable_store: android_usb: already disabled
[ 9.467224] msm_isp_close_node: halt timeout rc=0
[ 9.473819] Error: Driver 'DS' is already registered, aborting...
[ 9.475066] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 9.491225] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 9.557070] msm_tsens_get_temp: tsens mapping index not found
[ 9.561890] msm_tsens_get_temp: tsens mapping index not found
[ 9.567553] msm_tsens_get_temp: tsens mapping index not found
[ 9.573468] msm_tsens_get_temp: tsens mapping index not found
[ 9.577221] msm8x10-wcd-i2c-core msm8x10_wcd_codec: dapm: unknown pin Lineout amp
[ 9.586575] msm_tsens_get_temp: tsens mapping index not found
[ 9.592246] msm_tsens_get_temp: tsens mapping index not found
[ 9.622395] init: untracked pid 381 exited
[ 9.714386] wcnss: no space available for smd frame
[ 9.740351] wcnss: no space available for smd frame
[ 9.770309] wcnss: no space available for smd frame
[ 9.800193] ------------[ cut here ]------------
[ 9.800232] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[ 9.800240] Unbalanced enable for IRQ 330
[ 9.800324] wcnss: no space available for smd frame
[ 9.800487] ---[ end trace 01a43b38716dad66 ]---
[ 9.833568] wcnss: not setting up vbatt
Android Bootloader - UART_DM Initialized!!!
[0] welcome to lk
[10] platform_init()
[10] target_init()
[30] Done initialization of the card
[130] Config MIPI_VIDEO_PANEL.
[130] mdss_dsi_panel_initialize: wxun: mipi_dsi.c--lane_swap=1
[140] mipi_panel_auto_detect:start
[150] otm9605A_read_reg_single: wxun, mipi_tianma_otm9605a_video_qhd.c reg=0xd202
[150] mipi_panel_auto_detect_otm9605A: lcdid=0x9605.
[160] mipi_tianma_otm9605A_panel_video_qhd_reinit: start
[160] mdss_dsi_config_reinit: lctlc: mipi_dsi.c
[330] Turn on MIPI_VIDEO_PANEL.
[340] Video lane tested successfully
[570] Backlight enable=1 failed
[570] pm8x41_get_is_cold_boot: cold boot
[570] target_pause_for_battery_charge : pon_reason is 2 cold_boot:1
[580] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
[590] Loading boot image (6486016): start
[660] Loading boot image (6486016): done
[670] ERROR: Unable to find suitable device tree for device (165/0x00010001/11/0)
[680] Using DTB entry 165/00010001/11/0 for device 165/00010001/11/0
[690] pm8x41_get_is_cold_boot: cold boot
[690] target_pause_for_battery_charge : pon_reason is 2 cold_boot:1
[690] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_vid[720] Updating device tree: start
[830] Updating device tree: done
[840] booting linux @ 0x8000, ramdisk @ 0x2000000 (459525), tags/device tree @ 0x1e00000
[840] Turn off MIPI_VIDEO_PANEL.
[840] Continuous splash enabled, keeping panel alive.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-g8218128-00704-g42fcf2d-dirty (xxx@soft111) (gcc version 4.7 (GCC) ) #5 SMP PREEMPT Mon Dec 30 21:01:18 CST 2013
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Qualcomm MSM 8610 (Flattened Device Tree), model: Qualcomm MSM 8610v2 QRD SKUAA
[ 0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-3a00000
[ 0.000000] Node qcom,msm-mem-hole removed memory 8800000-de00000
[ 0.000000] qcom,msm-rtb reserved EBI1 size 100000
[ 0.000000] memory pool 3 (start 0x1ff00000 size 100000) initialized
[ 0.000000] cma: CMA: reserved 16 MiB at 1ec00000
[ 0.000000] cma: Found qsecom_region, memory base 0, size 1 MiB
[ 0.000000] cma: CMA: reserved 4 MiB at 1e800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] IMEM DT static mapping successful
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c15c7000 s15872 r8192 d12800 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 107648
[ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_video lcm.id=0x9605
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 136MB 289MB = 425MB total
[ 0.000000] Memory: 384796k/384796k available, 51428k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xcde00000 - 0xe0000000 ( 290 MB)
[ 0.000000] vmalloc : 0xc8800000 - 0xcde00000 ( 86 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8800000 ( 136 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0c4f41c (12574 kB)
[ 0.000000] .init : 0xc0d00000 - 0xc0e12e00 (1100 kB)
[ 0.000000] .data : 0xc0e14000 - 0xc0ef8e08 ( 916 kB)
[ 0.000000] .bss : 0xc0ef8e2c - 0xc1113440 (2154 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] Console: colour dummy device 80x30
[ 0.000182] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000207] pid_max: default: 32768 minimum: 301
[ 0.000491] Security Framework initialized
[ 0.000544] SELinux: Initializing.
[ 0.000702] Mount-cache hash table entries: 512
[ 0.001985] Initializing cgroup subsys debug
[ 0.002002] Initializing cgroup subsys cpuacct
[ 0.002014] Initializing cgroup subsys freezer
[ 0.002071] CPU: Testing write buffer coherency: ok
[ 0.002571] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002658] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[ 0.005166] Setting up static identity map for 0x8a42f0 - 0x8a4354
[ 0.005204] Configuring XPU violations to be fatal errors
[ 0.005218] MSM Memory Dump table set up
[ 0.012615] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.018950] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.025288] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.025396] Brought up 4 CPUs
[ 0.025416] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.039719] dummy:
[ 0.056279] NET: Registered protocol family 16
[ 0.068786] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.070903] KPI: Bootloader start count = 23312
[ 0.070917] KPI: Bootloader end count = 51364
[ 0.070927] KPI: Bootloader display count = 34143
[ 0.070937] KPI: Bootloader load kernel count = 2449
[ 0.070948] KPI: Kernel MPM timestamp = 79280
[ 0.070958] KPI: Kernel MPM Clock frequency = 32768
[ 0.070981] socinfo_print: v8, id=165, ver=1.1, raw_id=2069, raw_ver=1, hw_plat=11, hw_plat_ver=196608
[ 0.070989] accessory_chip=0, hw_plat_subtype=0, pmic_model=65541, pmic_die_revision=131072
[ 0.085795] gpiochip_add: registered GPIOs 0 to 101 on device: msmgpio
[ 0.090645] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
[ 0.121180] 8110_s1: 500 <--> 1275 mV at 0 mV normal idle
[ 0.121868] 8110_s1_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.122550] 8110_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
[ 0.123218] 8110_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.123929] 8110_s3: 1200 <--> 1350 mV at 1200 mV normal idle
[ 0.124626] 8110_s4: 1800 <--> 2150 mV at 2150 mV normal idle
[ 0.125331] 8110_l1: 1225 mV normal idle
[ 0.126051] 8110_l2: 1200 mV normal idle
[ 0.126727] 8110_l3: 750 <--> 1275 mV at 0 mV normal idle
[ 0.127335] 8110_l3_ao: 750 <--> 1275 mV at 0 mV normal idle
[ 0.127967] 8110_l3_so: 750 <--> 1275 mV at 750 mV normal idle
[ 0.128945] 8110_l4: 1200 mV normal idle
[ 0.129602] 8110_l5: 1300 <--> 1350 mV at 1300 mV normal idle
[ 0.130285] 8110_l6: 1800 mV normal idle
[ 0.130978] 8110_l7: 2050 mV normal idle
[ 0.131692] 8110_l8: 1800 mV normal idle
[ 0.132369] 8110_l9: 2050 mV normal idle
[ 0.133086] 8110_l10: 1800 mV normal idle
[ 0.133730] 8110_l10_ao: 1800 mV normal idle
[ 0.134388] 8110_l10_so: 1800 mV normal idle
[ 0.135034] 8110_l12: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.136054] 8110_l14: 1800 mV normal idle
[ 0.136768] 8110_l15: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.137441] 8110_l16: 3000 <--> 3350 mV at 3000 mV normal idle
[ 0.138128] 8110_l17: 2900 mV normal idle
[ 0.138836] 8110_l18: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.139508] 8110_l19: 2850 mV normal idle
[ 0.140213] 8110_l20: 3075 mV normal idle
[ 0.140913] 8110_l21: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.141589] 8110_l22: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.143226] msm-thermal qcom,msm-thermal.51: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. KTM continues
[ 0.143602] vdd_restriction_reg_init:Defer vdd rstr freq init
[ 0.169372] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.169391] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.170081] msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized
[ 0.172114] 8110_s2: 900 <--> 1275 mV at 1150 mV
[ 0.172369] spm_regulator_probe: name=8110_s2, range=LV, voltage=1150000 uV, mode=AUTO, step rate=9600 uV/us
[ 0.173811] cpr_efuse_init: efuse_addr = 0xfc4b8000 (len=0x1000)
[ 0.173853] cpr_voltage_plan_init: [1] [1150000 1150000 1275000] uV
[ 0.173868] cpr_voltage_plan_init: [2] [1075000 1075000 1275000] uV
[ 0.173881] cpr_voltage_plan_init: [3] [1050000 1050000 1275000] uV
[ 0.173945] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[ 0.173990] cpr_pvs_init: [row:23] = 0xA0128513000002E0, n_bits=5, bin=11 (3)
[ 0.174004] cpr_pvs_init: pvs initial turbo voltage_= from 1275000 to 1275000
[ 0.174363] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[ 0.174414] cpr_init_cpr_efuse: [row:61] = 0x1250f115d9da8
[ 0.174434] cpr_init_cpr_efuse: disable = 0, local = 1
[ 0.174447] cpr_init_cpr_efuse: Corner[1]: ro_sel = 2, target quot = 482
[ 0.174461] cpr_init_cpr_efuse: Corner[2]: ro_sel = 2, target quot = 699
[ 0.174474] cpr_init_cpr_efuse: Corner[3]: ro_sel = 2, target quot = 949
[ 0.174530] cpr_init_cpr_parameters: CPR is enabled by default.
[ 0.174551] cpr_config: Timer count: 0x17700 (for 5000 us)
[ 0.174885] apc_corner: 0 <--> 0 mV
[ 0.177526] qup_i2c f9923000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.178791] kworker/u:1 used greatest stack depth: 6144 bytes left
[ 0.180571] qup_i2c f9927000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.182604] qup_i2c f9928000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.184943] qup_i2c f9925000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.188836] sps:sps is ready.
[ 0.190562] gdsc_vfe:
[ 0.191009] gdsc_oxili_cx:
[ 0.191640] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[ 0.193004] msm_bus_fabric fc478000.msm-mmss-noc: msmbus_coresight initialized
[ 0.194129] msm_bus_fabric fc460000.msm-sys-noc: msmbus_coresight initialized
[ 0.195011] msm_bus_fabric fc468000.msm-periph-noc: msmbus_coresight initialized
[ 0.196529] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 5120
[ 0.197265] msm_bus_fabric fc380000.msm-bimc: msmbus_coresight initialized
[ 0.229891] bio: create slab <bio-0> at 0
[ 0.231108] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
[ 0.231714] ION heap vmalloc created
[ 0.231873] ION heap kmalloc created
[ 0.231934] ION heap iommu created
[ 0.231963] ION heap qsecom created
[ 0.232000] ION heap pil_1 created at 0x0c500000 with size 1300000
[ 0.232045] ION heap pil_2 created at 0x08800000 with size 3d00000
[ 0.233507] Linux media interface: v0.10
[ 0.233600] Linux video capture interface: v2.00
[ 0.235275] msm_iommu_dev_v0: lpass_iommu enabled remote spinlock
[ 0.236446] msm_iommu_dev_v0: device lpass_iommu mapped at c88e0000, with 4 ctx banks
[ 0.238800] msm_iommu_dev_v0: device copss_iommu mapped at c8960000, with 8 ctx banks
[ 0.239591] msm_iommu_dev_v0: device mdpe_iommu mapped at c8b20000, with 2 ctx banks
[ 0.240303] msm_iommu_dev_v0: device mdps_iommu mapped at c8b40000, with 2 ctx banks
[ 0.241307] msm_iommu_dev_v0: device gfx_iommu mapped at c8b60000, with 3 ctx banks
[ 0.241755] msm_iommu_dev_v0: device vfe_iommu mapped at c8b80000, with 1 ctx banks
[ 0.242963] msm_iommu_ctx fd000000.qcom,iommu-ctx: context q6_fw using bank 0
[ 0.243147] msm_iommu_ctx fd001000.qcom,iommu-ctx: context audio_shared using bank 1
[ 0.243366] msm_iommu_ctx fd002000.qcom,iommu-ctx: context video_shared using bank 2
[ 0.243596] msm_iommu_ctx fd003000.qcom,iommu-ctx: context q6_spare using bank 3
[ 0.243809] msm_iommu_ctx fd010000.qcom,iommu-ctx: context copss_0 using bank 0
[ 0.243994] msm_iommu_ctx fd011000.qcom,iommu-ctx: context copss_1 using bank 1
[ 0.244321] msm_iommu_ctx fd012000.qcom,iommu-ctx: context copss_2 using bank 2
[ 0.244740] msm_iommu_ctx fd013000.qcom,iommu-ctx: context copss_3 using bank 3
[ 0.244930] msm_iommu_ctx fd014000.qcom,iommu-ctx: context copss_4 using bank 4
[ 0.245113] msm_iommu_ctx fd015000.qcom,iommu-ctx: context copss_5 using bank 5
[ 0.245367] msm_iommu_ctx fd016000.qcom,iommu-ctx: context copss_6 using bank 6
[ 0.245552] msm_iommu_ctx fd017000.qcom,iommu-ctx: context copss_7 using bank 7
[ 0.245804] msm_iommu_ctx fd860000.qcom,iommu-ctx: context mdpe_0 using bank 0
[ 0.245989] msm_iommu_ctx fd861000.qcom,iommu-ctx: context mdpe_1 using bank 1
[ 0.246201] msm_iommu_ctx fd870000.qcom,iommu-ctx: context mdps_0 using bank 0
[ 0.246386] msm_iommu_ctx fd871000.qcom,iommu-ctx: context mdps_1 using bank 1
[ 0.246701] msm_iommu_ctx fd880000.qcom,iommu-ctx: context gfx3d_user using bank 0
[ 0.246986] msm_iommu_ctx fd881000.qcom,iommu-ctx: context gfx3d_priv using bank 1
[ 0.247177] msm_iommu_ctx fd882000.qcom,iommu-ctx: context gfx3d_spare using bank 2
[ 0.247443] msm_iommu_ctx fd890000.qcom,iommu-ctx: context vfe0 using bank 0
[ 0.247619] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.248478] Bluetooth: Core ver 2.16
[ 0.248550] NET: Registered protocol family 31
[ 0.248561] Bluetooth: HCI device and connection manager initialized
[ 0.248577] Bluetooth: HCI socket layer initialized
[ 0.248590] Bluetooth: L2CAP socket layer initialized
[ 0.248913] Bluetooth: SCO socket layer initialized
[ 0.249355] cfg80211: Calling CRDA to update world regulatory domain
[ 0.249407] cfg80211: World regulatory domain updated:
[ 0.249419] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.249436] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.249451] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.249467] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 0.249483] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.249498] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.250153] Switching to clocksource arch_sys_counter
[ 0.303556] NET: Registered protocol family 2
[ 0.304020] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.305461] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.308748] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[ 0.309193] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.309207] TCP: reno registered
[ 0.309322] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.309456] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.309893] NET: Registered protocol family 1
[ 0.310550] Trying to unpack rootfs image as initramfs...
[ 0.353712] Freeing initrd memory: 448K
[ 0.359246] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
[ 0.360322] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
[ 0.360529] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
[ 0.361539] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
[ 0.361745] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
[ 0.362771] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
[ 0.363017] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
[ 0.364086] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
[ 0.364293] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
[ 0.365354] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
[ 0.365599] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
[ 0.366686] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
[ 0.366904] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
[ 0.368026] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
[ 0.369644] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
[ 0.374499] pil_pronto fb21b000.qcom,pronto: using secure boot
[ 0.383717] NET: Registered protocol family 27
[ 0.386336] platform qcom,msm-audio-ion.30: Driver msm-audio-ion requests probe deferral
[ 0.391565] find_cur_cpu_level: CPUs are running at an unknown rate. Defaulting to 1190400 KHz.
[ 0.391873] cpufreq_table_init: CPU: 6 scaling frequencies supported.
[ 0.393085] msm_rpmrbcpr_memalloc: Invalid num corners 4, num recmnds 3
[ 0.393117] msm_rpmrbcpr_stats: probe of fc000000.qcom,rpm-rbcpr-stats failed with error -14
[ 0.393504] msm_rpm_log_probe: OK
[ 0.405637] audit: initializing netlink socket (disabled)
[ 0.405688] type=2000 audit(0.390:1): initialized
[ 0.523502] fuse init (API version 7.18)
[ 0.523996] msgmni has been set to 792
[ 0.526105] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.526118] io scheduler noop registered
[ 0.526126] io scheduler deadline registered
[ 0.526144] io scheduler row registered
[ 0.526312] io scheduler cfq registered (default)
[ 0.526321] io scheduler test-iosched registered
[ 0.526607] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc0 incorrect owner 2
[ 0.526696] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc1 incorrect owner 5
[ 0.526787] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc2 incorrect owner 4
[ 0.526867] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc3 incorrect owner 2
[ 0.527001] gpiochip_add: registered GPIOs 572 to 575 on device: pm8110-gpio
[ 0.527323] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa3 incorrect owner 2
[ 0.527447] gpiochip_add: registered GPIOs 570 to 571 on device: pm8110-mpp
[ 0.529503] mdss_dsi_panel_init: Panel Name = TIANMA OTM9605A QHD video mode dsi panel
[ 0.529732] mdss_dsi_panel_init:977 Continuous splash flag enabled.
[ 0.529742] mdss_dsi_panel_init:989 Partial update disabled.
[ 0.529798] dsi_parse_gpio:156, Disp_en gpio not specified
[ 0.530323] mdss_register_panel: adding framebuffer device fdd00000.qcom,mdss_dsi
[ 0.562500] mdss_fb_register: FrameBuffer[0] 540x960 size=0 registered successfully!
[ 0.604291] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
[ 0.604313] AXI: get_pdata(): Error: Client name not found
[ 0.604322] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[ 0.604330] msm_serial_hsl_probe: Bus scaling is disabled
[ 0.604464] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
[ 0.604526] msm_hsl_console_setup: console setup on port #0
[ 2.165077] console [ttyHSL0] enabled
[ 2.169101] msm_serial_hsl_init: driver initialized
[ 2.177538] diagchar initialized now
[ 2.182473] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
[ 2.199295] brd: module loaded
[ 2.205109] loop: module loaded
[ 2.207646] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
[ 2.212101] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
[ 2.217623] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x0
[ 2.223261] QSEECOM: qseecom_probe: secure app region addr=0xda00000 size=0x100000
[ 2.231369] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[ 2.237674] i2c-core: driver [tabla-i2c-core] using legacy resume method
[ 2.244543] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[ 2.251326] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[ 2.258689] sps: BAM device 0xf9904000 is not registered yet.
[ 2.263926] sps:BAM 0xf9904000 is registered.
[ 2.268365] sps:BAM 0xf9904000 (va:0xc8be0000) enabled: ver:0x15, number of pipes:24
[ 2.276391] spi_qsd f9926000.spi: master is unqueued, this is deprecated
[ 2.283785] tun: Universal TUN/TAP device driver, 1.6
[ 2.287792] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 2.294074] rmnet_init: BAM devices[9]
[ 2.306051] PPP generic driver version 2.4.2
[ 2.309428] PPP BSD Compression module registered
[ 2.314002] PPP Deflate Compression module registered
[ 2.319784] PPP MPPE Compression module registered
[ 2.323804] NET: Registered protocol family 24
[ 2.328518] wcnss_wlan probed in built-in mode
[ 2.334939] msm_otg f9a55000.usb: msm_otg probe
[ 2.338885] msm_otg f9a55000.usb: OTG regs = c8942000
[ 2.346426] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
[ 2.351360] msm_otg f9a55000.usb: phy_reset: success
[ 2.356953] mbim_init: initialize 1 instances
[ 2.360730] mbim_init: Initialized 1 ports
[ 2.366671] rndis_qc_init: initialize rndis QC instance
[ 2.371546] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.377711] android_usb gadget: Number of LUNs=3
[ 2.382340] lun0: LUN: removable file: (no medium)
[ 2.387172] lun1: LUN: removable read only CD-ROM file: (no medium)
[ 2.393529] lun2: LUN: removable file: (no medium)
[ 2.398707] android_usb gadget: android_usb ready
[ 2.404515] [himax] himax_ts_init
[ 2.406829] wxun: himax_ts_probe: irq set here
[ 2.411410] [HIMAX PORTING MSG]himax_ts_probe ts->client->irq =330
[ 2.417466] wxun: himax_ts_probe: reset set here
[ 2.422174] ------------[ cut here ]------------
[ 2.426762] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[ 2.437427] autorequest GPIO-0
[ 2.440465] Modules linked in:
[ 2.443521] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[ 2.452973] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[ 2.462521] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[ 2.472159] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[ 2.482229] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c05355c8>] (himax_ts_probe+0x174/0xc64)
[ 2.491864] [<c05355c8>] (himax_ts_probe+0x174/0xc64) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[ 2.500977] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[ 2.510437] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[ 2.519814] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[ 2.528841] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[ 2.537868] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[ 2.546897] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[ 2.556272] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[ 2.565733] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[ 2.574589] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[ 2.583371] ---[ end trace 06c5b712ff615628 ]---
[ 2.660254] msm_thermal: Limiting cpu0 max frequency to 787200
[ 2.665590] msm_thermal: Limiting cpu1 max frequency to 787200
[ 2.671044] msm_thermal: Limiting cpu2 max frequency to 787200
[ 2.676705] cpr_irq_handler: IRQ_STATUS = 0x45
[ 2.676837] msm_thermal: Limiting cpu3 max frequency to 787200
[ 2.686956] cpr_scale: last_volt[corner:2] = 1050000 uV
[ 2.692150] cpr_scale: Down: cpr status = 0x00003679 (error_steps=14)
[ 2.698554] cpr_scale: [corn:2] @ floor: 1050000 <= 1050000: NACK
[ 2.910749] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[ 2.916605] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[ 2.940394] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 2.946338] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[ 2.970387] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 2.976330] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[ 3.000253] [TP] i2c_himax_read: i2c_read_block retry over 3
[ 3.004872] himax_ts_probe other driver has been loaded
[ 3.010199] msg26xx: msg26xx_ts_init
[ 3.013725] msg26xx: TPD probe
[ 3.016677] ------------[ cut here ]------------
[ 3.021287] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[ 3.031954] autorequest GPIO-0
[ 3.034991] Modules linked in:
[ 3.038044] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[ 3.047503] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[ 3.057052] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[ 3.066690] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[ 3.076758] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c0538984>] (tpd_probe+0x3c/0x748)
[ 3.085872] [<c0538984>] (tpd_probe+0x3c/0x748) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[ 3.094465] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[ 3.103925] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[ 3.113302] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[ 3.122329] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[ 3.131355] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[ 3.140385] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[ 3.149759] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[ 3.159220] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[ 3.168076] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[ 3.176834] ---[ end trace 06c5b712ff615629 ]---
[ 3.520394] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 3.526341] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[ 3.532614] _msg_WriteI2CSeq error -107,addr = 38
[ 3.537255] msg26xx: _msg_GetVersion ret = -107
[ 3.570386] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 3.576329] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[ 3.582604] _msg_WriteI2CSeq error -107,addr = 38
[ 3.587245] msg26xx: _msg_GetVersion ret = -107
[ 3.620386] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 3.626329] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[ 3.632602] _msg_WriteI2CSeq error -107,addr = 38
[ 3.637245] msg26xx: _msg_GetVersion ret = -107
[ 3.670251] msg26xx: may be there is not msg26xx tp
[ 3.674195] msg26xx: probe of 1-0026 failed with error 19
[ 3.679692] FTS: ft5x0x_ts_probe enter
[ 3.683399] FTS: irq = 330
[ 4.111150] FTS: --------ft5x0x_read_version---------fwversion=b,module=5d
[ 4.117857] input: ft5x0x_ts as /devices/virtual/input/input0
[ 4.280478] ft5x0x_ts 1-0038: Create proc entry success!
[ 4.285208] FTS: Firmware version = 0xb
[ 4.289106] FTS: report rate is 100Hz.
[ 4.292957] FTS: touch threshold is 48.
[ 4.296695] input: proximity as /devices/f9923000.i2c/i2c-1/1-0038/input/input1
[ 4.303867] FTS: tp_prox_setup_polled_device, err=0, poll-interval=100
[ 4.310313] Successfully added driver ft5x0x_ts
[ 4.314699] ctp_selftest_init
[ 4.317769] create_proc_entry g_ctp_selftest_proc success
[ 4.323064] ctp_upgrade_init
[ 4.326008] [elan] create_proc_entry 222 success
[ 4.330539] create_proc_entry success
[ 4.334142] ctp_if_upgrade_init
[ 4.337380] ctp_if_upgrade_init create_proc_entry 222 success
[ 4.343039] create_proc_entry success
[ 4.346651] create_proc_entry success
[ 4.350391] bma2x2_probe:
[ 4.380811] bma2x2_probe: chipid=20f8
[ 4.383760] input: accelerometer as /devices/f9925000.i2c/i2c-0/0-0018/input/input2
[ 4.391273] bma2x2_disable,start
[ 4.395267] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1414, h:m:s == 0:23:34, d/m/y = 1/0/70
[ 4.402587] qcom,qpnp-rtc qpnp-rtc-de539800: Alarm set for - h:r:s=0:0:0, d/m/y=1/0/70
[ 4.410488] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1414, h:m:s == 0:23:34, d/m/y = 1/0/70
[ 4.419120] using rtc device, qpnp_rtc, for alarms
[ 4.423336] qcom,qpnp-rtc qpnp-rtc-de539800: rtc core: registered qpnp_rtc as rtc0
[ 4.431279] qcom,qpnp-rtc qpnp-rtc-de539800: Probe success !!
[ 4.436789] i2c /dev entries driver
[ 4.449500] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[ 4.455409] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[ 4.462541] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[ 4.469022] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[ 4.476749] s5k4e1_init_module:153
[ 4.479653] s5k4e1_init_module:158 rc -19
[ 4.484467] zgc2235_init_module:141
[ 4.487442] zgc2235_init_module:146 rc -19
[ 4.491081] msm_sensor_i2c_probe gc2235_i2c_probe called
[ 4.496290] msm_sensor_i2c_probe: of_node exisists
[ 4.500928] msm_sensor_get_dt_data qcom,sensor-name gc2235, rc 0
[ 4.507058] msm_sensor_get_dt_data qcom,sensor-mode 0, rc 0
[ 4.512641] msm_sensor_get_dt_data qcom,sensor-position 1, rc 0
[ 4.518515] msm_sensor_get_dt_data qcom,mount-angle 270, rc 0
[ 4.524273] msm_sensor_get_dt_data qcom,cci-master 0, rc 0
[ 4.529714] msm_sensor_get_sub_module_index:75 src_node NULL
[ 4.535384] msm_sensor_get_sub_module_index:92 eeprom src_node NULL
[ 4.541654] msm_sensor_get_sub_module_index qcom,led flash cell index 1, rc 0
[ 4.548727] msm_sensor_get_sub_module_index csiphy_core[0] = 1
[ 4.554572] msm_sensor_get_sub_module_index csid_core[0] = 1
[ 4.560184] msm_sensor_get_dt_csi_data qcom,csi-lane-assign e4, rc 0
[ 4.566548] msm_sensor_get_dt_csi_data qcom,csi-lane-mask 3, rc 0
[ 4.572622] msm_sensor_get_dt_vreg_data qcom,cam-vreg-name count 3
[ 4.578760] msm_sensor_get_dt_vreg_data reg_name[0] = cam_vdig
[ 4.584601] msm_sensor_get_dt_vreg_data reg_name[1] = cam_vio
[ 4.590329] msm_sensor_get_dt_vreg_data reg_name[2] = cam_vana
[ 4.596121] msm_sensor_get_dt_vreg_data cam_vreg[0].type = 0
[ 4.601787] msm_sensor_get_dt_vreg_data cam_vreg[1].type = 0
[ 4.607402] msm_sensor_get_dt_vreg_data cam_vreg[2].type = 0
[ 4.613074] msm_sensor_get_dt_vreg_data cam_vreg[0].min_voltage = 1800000
[ 4.619816] msm_sensor_get_dt_vreg_data cam_vreg[1].min_voltage = 1800000
[ 4.626612] msm_sensor_get_dt_vreg_data cam_vreg[2].min_voltage = 2850000
[ 4.633386] msm_sensor_get_dt_vreg_data cam_vreg[0].max_voltage = 1800000
[ 4.640127] msm_sensor_get_dt_vreg_data cam_vreg[1].max_voltage = 1800000
[ 4.646926] msm_sensor_get_dt_vreg_data cam_vreg[2].max_voltage = 2850000
[ 4.653699] msm_sensor_get_dt_vreg_data cam_vreg[0].op_mode = 200000
[ 4.660006] msm_sensor_get_dt_vreg_data cam_vreg[1].op_mode = 200000
[ 4.666369] msm_sensor_get_dt_vreg_data cam_vreg[2].op_mode = 80000
[ 4.672672] msm_sensor_get_dt_data gpio count 3
[ 4.677118] msm_sensor_get_dt_data gpio_array[0] = 13
[ 4.682237] msm_sensor_get_dt_data gpio_array[1] = 15
[ 4.687193] msm_sensor_get_dt_data gpio_array[2] = 85
[ 4.692252] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].gpio = 13
[ 4.698895] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].gpio = 15
[ 4.705607] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].gpio = 85
[ 4.712292] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].flags = 1
[ 4.718947] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].flags = 0
[ 4.725658] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].flags = 0
[ 4.732344] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].label = CAMIF_MCLK
[ 4.739783] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].label = CAM_RESET
[ 4.747190] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].label = CAM_STANDBY
[ 4.754747] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 15
[ 4.760297] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 85
[ 4.765837] msm_sensor_get_dt_actuator_data qcom,actuator-cam-name 0, rc -22
[ 4.772886] msm_sensor_get_dt_data qcom,misc_regulator (null), rc -22
[ 4.779280] msm_sensor_power_up:991
[ 4.782798] msm_sensor_power_up index 0
[ 4.786567] msm_sensor_power_up type 2
[ 4.801802] msm_sensor_power_up index 1
[ 4.804598] msm_sensor_power_up type 2
[ 4.819755] msm_sensor_power_up index 2
[ 4.822582] msm_sensor_power_up type 2
[ 4.837630] msm_sensor_power_up index 3
[ 4.840457] msm_sensor_power_up type 0
[ 4.850238] msm_sensor_power_up index 4
[ 4.853032] msm_sensor_power_up type 1
[ 4.900257] msm_sensor_power_up index 5
[ 4.903050] msm_sensor_power_up type 1
[ 4.950254] msm_sensor_power_up index 6
[ 4.953049] msm_sensor_power_up type 1
[ 5.000253] msm_sensor_power_up index 7
[ 5.003047] msm_sensor_power_up type 1
[ 5.050277] msm_sensor_power_up index 8
[ 5.053071] msm_sensor_power_up type 3
[ 5.057107] qup_i2c f9928000.i2c: QUP: I2C status flags :0x1363c8, irq:132
[ 5.063691] qup_i2c f9928000.i2c: I2C slave addr:0x21 not connected
[ 5.069929] msm_sensor_match_id: gc2235: read id failed
[ 5.075153] msm_sensor_power_up:1095 match id failed rc -107
[ 5.080790] msm_sensor_power_up:1102 failed
[ 5.084930] msm_sensor_power_up index 8
[ 5.088748] msm_sensor_power_up type 3
[ 5.092508] msm_sensor_power_up index 7
[ 5.096300] msm_sensor_power_up type 1
[ 5.140256] msm_sensor_power_up index 6
[ 5.143051] msm_sensor_power_up type 1
[ 5.190248] msm_sensor_power_up index 5
[ 5.193044] msm_sensor_power_up type 1
[ 5.240254] msm_sensor_power_up index 4
[ 5.243049] msm_sensor_power_up type 1
[ 5.290373] msm_sensor_power_up index 3
[ 5.293168] msm_sensor_power_up type 0
[ 5.302948] msm_sensor_power_up index 2
[ 5.305744] msm_sensor_power_up type 2
[ 5.320806] msm_sensor_power_up index 1
[ 5.323602] msm_sensor_power_up type 2
[ 5.338689] msm_sensor_power_up index 0
[ 5.341517] msm_sensor_power_up type 2
[ 5.356582] msm_sensor_i2c_probe gc2235 power up failed
[ 5.360813] gc2235: probe of 6-0078 failed with error -107
[ 5.370752] lirc_dev: IR Remote Control driver registered, major 241
[ 5.376157] IR NEC protocol handler initialized
[ 5.380703] IR RC5(x) protocol handler initialized
[ 5.385444] IR RC6 protocol handler initialized
[ 5.389957] IR JVC protocol handler initialized
[ 5.394500] IR Sony protocol handler initialized
[ 5.399073] IR RC5 (streamzap) protocol handler initialized
[ 5.404655] IR SANYO protocol handler initialized
[ 5.409315] IR MCE Keyboard/mouse protocol handler initialized
[ 5.415159] IR LIRC bridge handler initialized
[ 5.420388] BMS: qpnp_bms_init: QPNP BMS INIT
[ 5.424006] spmi qpnp-bms-de539600: Driver qcom,qpnp-bms requests probe deferral
[ 5.431585] spmi qpnp-charger-de538800: Driver qcom,qpnp-charger requests probe deferral
[ 5.478450] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 5.487601] cpuidle: using governor ladder
[ 5.491616] cpuidle: using governor menu
[ 5.494622] sdhci: Secure Digital Host Controller Interface driver
[ 5.500758] sdhci: Copyright(c) Pierre Ossman
[ 5.505709] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.511298] AXI: get_pdata(): Error: Client name not found
[ 5.516179] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[ 5.525238] mmc0: no vmmc regulator found
[ 5.530724] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
[ 5.536778] AXI: get_pdata(): Error: Client name not found
[ 5.541893] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[ 5.551277] mmc1: no vmmc regulator found
[ 5.556721] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
[ 5.565037] zram: Created 1 device(s) ...
[ 5.573016] ashmem: initialized
[ 5.575292] logger: created 256K log 'log_main'
[ 5.581827] logger: created 256K log 'log_events'
[ 5.587646] logger: created 256K log 'log_radio'
[ 5.593423] logger: created 256K log 'log_system'
[ 5.604023] sps:BAM 0xf9a44000 is registered.
[ 5.609201] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
[ 5.619953] PMIC@SID0 Power-on reason: Triggered from SMPL (sudden momentary power loss) and 'cold' boot
[ 5.628853] input: qpnp_pon as /devices/virtual/input/input3
[ 5.635105] PMIC@SID0: PM8110 v2.0 options: 0, 0, 0, 0
[ 5.639619] coresight-fuse fc4be024.fuse: Fuse initialized
[ 5.645446] coresight-cti fc310000.cti: CTI initialized
[ 5.650083] coresight-cti fc311000.cti: CTI initialized
[ 5.655346] coresight-cti fc312000.cti: CTI initialized
[ 5.660577] coresight-cti fc313000.cti: CTI initialized
[ 5.665710] coresight-cti fc314000.cti: CTI initialized
[ 5.670985] coresight-cti fc315000.cti: CTI initialized
[ 5.676165] coresight-cti fc316000.cti: CTI initialized
[ 5.681477] coresight-cti fc317000.cti: CTI initialized
[ 5.686596] coresight-cti fc318000.cti: CTI initialized
[ 5.691840] coresight-cti fc351000.cti: CTI initialized
[ 5.696994] coresight-cti fc352000.cti: CTI initialized
[ 5.702233] coresight-cti fc353000.cti: CTI initialized
[ 5.707381] coresight-cti fc354000.cti: CTI initialized
[ 5.712466] mmc0: BKOPS_EN bit = 0
[ 5.712712] coresight-cti fc335000.cti: CTI initialized
[ 5.712939] coresight-cti fc338000.cti: CTI initialized
[ 5.713173] coresight-cti fc33c000.cti: CTI initialized
[ 5.713393] coresight-cti fc360000.cti: CTI initialized
[ 5.714080] coresight-csr fc301000.csr: CSR initialized
[ 5.745597] coresight-tmc fc326000.tmc: Byte Counter feature enabled
[ 5.751080] sps:BAM 0xfc37c000 is registered.
[ 5.755538] coresight-tmc fc326000.tmc: TMC initialized
[ 5.761503] coresight-tmc fc325000.tmc: TMC initialized
[ 5.766932] coresight-tpiu fc320000.tpiu: seta gpios not specified
[ 5.772135] coresight-tpiu fc320000.tpiu: setb gpios not specified
[ 5.778405] coresight-tpiu fc320000.tpiu: TPIU initialized
[ 5.783823] mmc0: new HS200 MMC card at address 0001
[ 5.784486] coresight-funnel fc323000.funnel: FUNNEL initialized
[ 5.784704] coresight-funnel fc321000.funnel: FUNNEL initialized
[ 5.784923] coresight-funnel fc322000.funnel: FUNNEL initialized
[ 5.785140] coresight-funnel fc355000.funnel: FUNNEL initialized
[ 5.785834] coresight-replicator fc324000.replicator: REPLICATOR initialized
[ 5.786735] coresight-stm fc302000.stm: STM initialized
[ 5.787469] coresight-hwevent fd820018.hwevent: Hardware Event driver initialized
[ 5.788495] coresight-etm fc34c000.etm: ETM initialized
[ 5.837979] coresight-etm fc34d000.etm: ETM initialized
[ 5.842952] mmcblk0: mmc0:0001 H4G1d 3.64 GiB
[ 5.843433] coresight-etm fc34e000.etm: ETM initialized
[ 5.843933] coresight-etm fc34f000.etm: ETM initialized
[ 5.844750] coresight-audio-etm audio_etm0.1: Audio ETM initialized
[ 5.845460] coresight-modem-etm modem_etm0.2: Modem ETM initialized
[ 5.846167] coresight-wcn-etm wcn_etm0.3: Wireless ETM initialized
[ 5.846861] coresight-rpm-etm rpm_etm0.4: RPM ETM initialized
[ 5.848503] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 5.848532] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 5.859499] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
[ 5.860373] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
[ 5.861549] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[ 5.862137] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[ 5.866499] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 5.866982] Netfilter messages via NETLINK v0.30.
[ 5.867099] nf_conntrack version 0.5.0 (6339 buckets, 25356 max)
[ 5.868221] ctnetlink v0.93: registering with nfnetlink.
[ 5.868744] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 5.868756] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 5.869178] xt_time: kernel timezone is -0000
[ 5.869798] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.870339] arp_tables: (C) 2002 David S. Miller
[ 5.870444] TCP: cubic registered
[ 5.871677] NET: Registered protocol family 10
[ 5.876601] Mobile IPv6
[ 5.876662] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 5.876959] IPv6 over IPv4 tunneling driver
[ 5.877915] NET: Registered protocol family 17
[ 5.878055] Bridge firewalling registered
[ 5.878079] Ebtables v2.0 registered
[ 6.008897] Bluetooth: RFCOMM TTY layer initialized
[ 6.013736] Bluetooth: RFCOMM socket layer initialized
[ 6.013779] mmcblk0rpmb: mmc0:0001 H4G1d partition 3 4.00 MiB
[ 6.017368] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22
[ 6.033711] Bluetooth: RFCOMM ver 1.11
[ 6.037353] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.042676] Bluetooth: BNEP filters: protocol multicast
[ 6.047859] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 6.054432] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[ 6.061462] Registering SWP/SWPB emulation handler
[ 6.074551] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 6.081146] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[ 6.082869] input: gpio-keys as /devices/gpio_keys.60/input/input4
[ 6.083523] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/70
[ 6.102231] qcom,qpnp-rtc qpnp-rtc-de539800: setting system clock to 1970-01-01 00:23:35 UTC (1415)
[ 6.102248] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[ 6.102277] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[ 6.102618] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[ 6.102630] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[ 6.102653] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[ 6.102769] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 6.102792] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.108020] batfet:
[ 6.119363] qcom,qpnp-charger:qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 0, dc = 0 b_health = 0 batt_present = 7
[ 6.153746] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/70
[ 6.186016] msm_otg f9a55000.usb: USB in low power mode
[ 6.188426] clock_late_init: Removing enables held for handed-off clocks
[ 6.201429] ALSA device list:
[ 6.203370] No soundcards found.
[ 6.205590] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/7 6.216017] Freeing init memory: 72K
[ 6.232980] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/70
[ 6.240380] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/70
[ 6.248752] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/70
[ 6.285278] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/70
[ 6.292679] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/70
[ 6.305394] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/70
[ 6.314984] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/70
[ 6.320474] type=1403 audit(1415.730:2): policy loaded auid=4294967295 ses=4294967295
[ 6.321195] SELinux: Loaded policy from (null)
[ 6.331563] init: /init.qcom.rc: 259: ignored duplicate definition of service 'usbhub_init'
[ 6.332664] init: /init.qcom.rc: 672: invalid command '/system/bin/log'
[ 6.336549] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[ 6.344636] init: invalid uid 'fm_radio'
[ 6.411147] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1416, h:m:s == 0:23:36, d/m/y = 1/0/70
[ 6.418504] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1416, h:m:s == 0:23:36, d/m/y = 1/0/70
[ 6.429547] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1416, h:m:s == 0:23:36, d/m/y = 1/0/70
[ 6.457385] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1416, h:m:s == 0:23:36, d/m/y = 1/0/70
[ 6.464811] BMS: qpnp_bms_probe: probe success: soc =100 vbatt = 3956604 ocv = 4067547 r_sense_uohm = 9406 warm_reset = 0
[ 6.477211] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 6.483608] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 6.489503] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1416, h:m:s == 0:23:36, d/m/y = 1/0/70
[ 6.499540] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.507796] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 6.514666] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.522355] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 6.680326] msm_thermal: Max frequency reset for cpu0
[ 6.686339] msm_thermal: Max frequency reset for cpu1
[ 6.690562] msm_thermal: Max frequency reset for cpu2
[ 6.695549] msm_thermal: Max frequency reset for cpu3
[ 7.015490] init: cannot open '/initlogo.rle'
[ 7.122366] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1
[ 7.188274] EXT4-fs (mmcblk0p22): recovery complete
[ 7.193048] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 7.210308] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
[ 7.257463] e2fsck used greatest stack depth: 5328 bytes left
[ 7.262256] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[ 7.266788] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 1008/131072 files, 49696/524288 blocks
[ 7.284196] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
[ 7.299395] EXT4-fs (mmcblk0p14): recovery complete
[ 7.304242] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1
[ 7.312340] EXT4-fs (mmcblk0p21): <<<<<wzg Opt_gid
[ 7.321675] EXT4-fs (mmcblk0p21): recovery complete
[ 7.326488] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: gid=1015
[ 7.333921] SELinux: Context u:object_r:blinkfeed_file:s0 is not valid (left unmapped).
[ 7.347652] EXT4-fs (mmcblk0p13): recovery complete
[ 7.352410] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: barrier=1
[ 7.415427] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
[ 7.425395] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
[ 7.443292] pil-q6v5-lpass fe200000.qcom,lpass: adsp: loading from 0x0c500000 to 0x0d200000
[ 7.524813] ueventd used greatest stack depth: 5284 bytes left
[ 7.653313] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset
[ 7.705607] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Power/Clock ready interrupt received
[ 7.719047] pil-q6v5-lpass fe200000.qcom,lpass: Subsystem error monitoring/handling services are up
[ 7.728251] apr_tal:Q6 Is Up
[ 7.730313] diag: In diag_send_msg_mask_update, invalid status 0
[ 7.730383] adsp-loader qcom,msm-adsp-loader.29: adsp_loader_do: Q6/ADSP image is loaded
[ 7.732282] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 7.732497] msm8x10-wcd-i2c-core 5-000d: adsp is ready
[ 7.732700] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdda-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
[ 7.732707]
[ 7.732734] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-px: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
[ 7.732740]
[ 7.732761] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-1p2v: vol=[1200000 1200000]uV, curr=[5000]uA, ond 0
[ 7.732767]
[ 7.732789] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdda-cp: vol=[1800000 2150000]uV, curr=[650000]uA, ond 1
[ 7.732795]
[ 7.732827] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-mic-bias: vol=[3075000 3075000]uV, curr=[25000]uA, ond 1
[ 7.732833]
[ 7.737726] wcd9xxx_core_res_init: num_irqs = 24, num_irq_regs = 3
[ 7.744131] msm8x10-wcd-i2c-core msm8x10_wcd_codec: msm8x10_wcd_i2c_probe: irq initialization passed
[ 7.746954] wcd9xxx_resmgr_init
[ 7.767569] wcd9xxx_mbhc_init: enter
[ 7.773724] wcd9xxx_mbhc_init: leave ret 0
[ 7.815138] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[ 7.815156] wcd9xxx_event_notify: leave
[ 7.816346] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[ 7.816354] wcd9xxx_event_notify: leave
[ 7.817460] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[ 7.817472] wcd9xxx_event_notify: leave
[ 7.818594] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[ 7.818607] wcd9xxx_event_notify: leave
[ 7.822794] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
[ 7.823774] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
[ 7.824627] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
[ 7.825392] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
[ 7.826219] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
[ 7.827066] asoc: snd-soc-dummy-dai <-> SEC_MI2S_RX_HOSTLESS mapping ok
[ 7.827843] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
[ 7.828406] asoc: msm-stub-rx <-> msm-dai-q6-dev.241 mapping ok
[ 7.828962] asoc: msm-stub-tx <-> msm-dai-q6-dev.240 mapping ok
[ 7.829694] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
[ 7.830560] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
[ 7.831404] asoc: snd-soc-dummy-dai <-> PRI_MI2S_TX_HOSTLESS mapping ok
[ 7.832310] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
[ 7.833406] asoc: snd-soc-dummy-dai <-> Voice2 mapping ok
[ 7.834337] asoc: snd-soc-dummy-dai <-> QCHAT mapping ok
[ 7.835194] msm8x10-wcd-i2c-core msm8x10_wcd_codec: dapm: unknown pin Lineout amp
[ 7.835643] asoc: msm8x10_wcd_i2s_rx1 <-> msm-dai-q6-mi2s.1 mapping ok
[ 7.836647] asoc: msm8x10_wcd_i2s_tx1 <-> msm-dai-q6-mi2s.0 mapping ok
[ 7.837241] asoc: msm-stub-rx <-> msm-dai-q6-dev.12288 mapping ok
[ 7.837797] asoc: msm-stub-tx <-> msm-dai-q6-dev.12289 mapping ok
[ 7.838366] asoc: msm-stub-rx <-> msm-dai-q6-dev.12292 mapping ok
[ 7.838922] asoc: msm-stub-tx <-> msm-dai-q6-dev.12293 mapping ok
[ 7.839598] asoc: msm-stub-rx <-> msm-dai-q6-dev.224 mapping ok
[ 7.840211] asoc: msm-stub-tx <-> msm-dai-q6-dev.225 mapping ok
[ 7.841050] asoc: msm-stub-tx <-> msm-dai-q6-dev.32772 mapping ok
[ 7.841642] asoc: msm-stub-tx <-> msm-dai-q6-dev.32771 mapping ok
[ 7.842419] asoc: msm-stub-rx <-> msm-dai-q6-dev.32773 mapping ok
[ 7.853912] input: Button Jack as /devices/sound.37/sound/card0/input5
[ 7.854403] input: Headset Jack as /devices/sound.37/sound/card0/input6
[ 8.061940] diag: In diag_send_log_mask_update, invalid status 0
[ 8.203470] wcnss_wlan triggered by userspace
[ 8.236982] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[ 8.244951] wcnss_trigger_config: adc get failed
[ 8.252781] init: cannot find '/system/bin/nac_server', disabling 'nac_server'
[ 8.264061] init: cannot find '/system/bin/qrngd', disabling 'qrngd'
[ 8.270007] pil_pronto fb21b000.qcom,pronto: wcnss: loading from 0x0d200000 to 0x0d6ee000
[ 8.376292] init: cannot find '/system/bin/wiperiface', disabling 'wiperiface'
[ 8.388350] init: cannot find '/system/bin/ssr_diag', disabling 'ssr_diag'
shell@msm8610:/ $ [ 8.521034] cp used greatest stack depth: 5068 bytes left
[ 9.076099] diag: In diag_send_msg_mask_update, invalid status 0
[ 9.084693] diag: In diag_send_log_mask_update, invalid status 0
[ 9.181276] msm_isp_close_node: halt timeout rc=0
[ 9.183932] init: untracked pid 274 exited
[ 9.187833] enable_store: android_usb: already disabled
[ 9.200077] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 9.211279] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 9.222024] Error: Driver 'DS' is already registered, aborting...
[ 9.227161] msm_tsens_get_temp: tsens mapping index not found
[ 9.233031] msm_tsens_get_temp: tsens mapping index not found
[ 9.238597] msm_tsens_get_temp: tsens mapping index not found
[ 9.244739] msm_tsens_get_temp: tsens mapping index not found
[ 9.250024] msm_tsens_get_temp: tsens mapping index not found
[ 9.255966] msm_tsens_get_temp: tsens mapping index not found
[ 9.278578] msm_audio_ion_import: DMA Buf name=audio_acdb_client, fd=18 handle=db065480
[ 9.362807] wcnss: no space available for smd frame
[ 9.390377] wcnss: no space available for smd frame
[ 9.403293] init: untracked pid 381 exited
[ 9.420415] wcnss: no space available for smd frame
[ 9.450442] wcnss: no space available for smd frame
[ 9.482566] wcnss: not setting up vbatt
Android Bootloader - UART_DM Initialized!!!
[0] welcome to lk
[10] platform_init()
[10] target_init()
[30] Done initialization of the card
[130] Config MIPI_VIDEO_PANEL.
[130] mdss_dsi_panel_initialize: wxun: mipi_dsi.c--lane_swap=1
[140] mipi_panel_auto_detect:start
[150] otm9605A_read_reg_single: wxun, mipi_tianma_otm9605a_video_qhd.c reg=0xd202
[150] mipi_panel_auto_detect_otm9605A: lcdid=0x9605.
[160] mipi_tianma_otm9605A_panel_video_qhd_reinit: start
[160] mdss_dsi_config_reinit: lctlc: mipi_dsi.c
[330] Turn on MIPI_VIDEO_PANEL.
[340] Video lane tested successfully
[570] Backlight enable=1 failed
[570] pm8x41_get_is_cold_boot: cold boot
[570] target_pause_for_battery_charge : pon_reason is 2 cold_boot:1
[580] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
[590] Loading boot image (6486016): start
[660] Loading boot image (6486016): done
[670] ERROR: Unable to find suitable device tree for device (165/0x00010001/11/0)
[680] Using DTB entry 165/00010001/11/0 for device 165/00010001/11/0
[690] pm8x41_get_is_cold_boot: cold boot
[690] target_pause_for_battery_charge : pon_reason is 2 cold_boot:1
[690] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_vid[720] Updating device tree: start
[830] Updating device tree: done
[840] booting linux @ 0x8000, ramdisk @ 0x2000000 (459525), tags/device tree @ 0x1e00000
[840] Turn off MIPI_VIDEO_PANEL.
[840] Continuous splash enabled, keeping panel alive.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-g8218128-00704-g42fcf2d-dirty (xxx@soft111) (gcc version 4.7 (GCC) ) #5 SMP PREEMPT Mon Dec 30 21:01:18 CST 2013
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Qualcomm MSM 8610 (Flattened Device Tree), model: Qualcomm MSM 8610v2 QRD SKUAA
[ 0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-3a00000
[ 0.000000] Node qcom,msm-mem-hole removed memory 8800000-de00000
[ 0.000000] qcom,msm-rtb reserved EBI1 size 100000
[ 0.000000] memory pool 3 (start 0x1ff00000 size 100000) initialized
[ 0.000000] cma: CMA: reserved 16 MiB at 1ec00000
[ 0.000000] cma: Found qsecom_region, memory base 0, size 1 MiB
[ 0.000000] cma: CMA: reserved 4 MiB at 1e800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] IMEM DT static mapping successful
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c15c7000 s15872 r8192 d12800 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 107648
[ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_video lcm.id=0x9605
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 136MB 289MB = 425MB total
[ 0.000000] Memory: 384796k/384796k available, 51428k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xcde00000 - 0xe0000000 ( 290 MB)
[ 0.000000] vmalloc : 0xc8800000 - 0xcde00000 ( 86 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8800000 ( 136 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0c4f41c (12574 kB)
[ 0.000000] .init : 0xc0d00000 - 0xc0e12e00 (1100 kB)
[ 0.000000] .data : 0xc0e14000 - 0xc0ef8e08 ( 916 kB)
[ 0.000000] .bss : 0xc0ef8e2c - 0xc1113440 (2154 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] Console: colour dummy device 80x30
[ 0.000181] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000205] pid_max: default: 32768 minimum: 301
[ 0.000485] Security Framework initialized
[ 0.000540] SELinux: Initializing.
[ 0.000694] Mount-cache hash table entries: 512
[ 0.001992] Initializing cgroup subsys debug
[ 0.002008] Initializing cgroup subsys cpuacct
[ 0.002020] Initializing cgroup subsys freezer
[ 0.002074] CPU: Testing write buffer coherency: ok
[ 0.002576] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002663] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[ 0.005175] Setting up static identity map for 0x8a42f0 - 0x8a4354
[ 0.005213] Configuring XPU violations to be fatal errors
[ 0.005227] MSM Memory Dump table set up
[ 0.012610] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.018937] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.025255] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.025362] Brought up 4 CPUs
[ 0.025381] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.039687] dummy:
[ 0.056256] NET: Registered protocol family 16
[ 0.068835] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.070979] KPI: Bootloader start count = 23237
[ 0.070992] KPI: Bootloader end count = 51289
[ 0.071002] KPI: Bootloader display count = 34066
[ 0.071012] KPI: Bootloader load kernel count = 2449
[ 0.071023] KPI: Kernel MPM timestamp = 79212
[ 0.071033] KPI: Kernel MPM Clock frequency = 32768
[ 0.071057] socinfo_print: v8, id=165, ver=1.1, raw_id=2069, raw_ver=1, hw_plat=11, hw_plat_ver=196608
[ 0.071065] accessory_chip=0, hw_plat_subtype=0, pmic_model=65541, pmic_die_revision=131072
[ 0.085872] gpiochip_add: registered GPIOs 0 to 101 on device: msmgpio
[ 0.090717] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
[ 0.121286] 8110_s1: 500 <--> 1275 mV at 0 mV normal idle
[ 0.121979] 8110_s1_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.122653] 8110_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
[ 0.123318] 8110_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.124037] 8110_s3: 1200 <--> 1350 mV at 1200 mV normal idle
[ 0.124737] 8110_s4: 1800 <--> 2150 mV at 2150 mV normal idle
[ 0.125441] 8110_l1: 1225 mV normal idle
[ 0.126161] 8110_l2: 1200 mV normal idle
[ 0.126838] 8110_l3: 750 <--> 1275 mV at 0 mV normal idle
[ 0.127443] 8110_l3_ao: 750 <--> 1275 mV at 0 mV normal idle
[ 0.128081] 8110_l3_so: 750 <--> 1275 mV at 750 mV normal idle
[ 0.129067] 8110_l4: 1200 mV normal idle
[ 0.129726] 8110_l5: 1300 <--> 1350 mV at 1300 mV normal idle
[ 0.130408] 8110_l6: 1800 mV normal idle
[ 0.131099] 8110_l7: 2050 mV normal idle
[ 0.131806] 8110_l8: 1800 mV normal idle
[ 0.132486] 8110_l9: 2050 mV normal idle
[ 0.133208] 8110_l10: 1800 mV normal idle
[ 0.133853] 8110_l10_ao: 1800 mV normal idle
[ 0.134503] 8110_l10_so: 1800 mV normal idle
[ 0.135151] 8110_l12: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.136176] 8110_l14: 1800 mV normal idle
[ 0.136896] 8110_l15: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.137569] 8110_l16: 3000 <--> 3350 mV at 3000 mV normal idle
[ 0.138254] 8110_l17: 2900 mV normal idle
[ 0.138965] 8110_l18: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.139638] 8110_l19: 2850 mV normal idle
[ 0.140344] 8110_l20: 3075 mV normal idle
[ 0.141039] 8110_l21: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.141714] 8110_l22: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.143338] msm-thermal qcom,msm-thermal.51: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. KTM continues
[ 0.143712] vdd_restriction_reg_init:Defer vdd rstr freq init
[ 0.169526] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.169545] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.170236] msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized
[ 0.172268] 8110_s2: 900 <--> 1275 mV at 1150 mV
[ 0.172526] spm_regulator_probe: name=8110_s2, range=LV, voltage=1150000 uV, mode=AUTO, step rate=9600 uV/us
[ 0.173967] cpr_efuse_init: efuse_addr = 0xfc4b8000 (len=0x1000)
[ 0.174008] cpr_voltage_plan_init: [1] [1150000 1150000 1275000] uV
[ 0.174022] cpr_voltage_plan_init: [2] [1075000 1075000 1275000] uV
[ 0.174036] cpr_voltage_plan_init: [3] [1050000 1050000 1275000] uV
[ 0.174100] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[ 0.174146] cpr_pvs_init: [row:23] = 0xA0128513000002E0, n_bits=5, bin=11 (3)
[ 0.174160] cpr_pvs_init: pvs initial turbo voltage_= from 1275000 to 1275000
[ 0.174520] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[ 0.174571] cpr_init_cpr_efuse: [row:61] = 0x1250f115d9da8
[ 0.174592] cpr_init_cpr_efuse: disable = 0, local = 1
[ 0.174606] cpr_init_cpr_efuse: Corner[1]: ro_sel = 2, target quot = 482
[ 0.174619] cpr_init_cpr_efuse: Corner[2]: ro_sel = 2, target quot = 699
[ 0.174633] cpr_init_cpr_efuse: Corner[3]: ro_sel = 2, target quot = 949
[ 0.174688] cpr_init_cpr_parameters: CPR is enabled by default.
[ 0.174709] cpr_config: Timer count: 0x17700 (for 5000 us)
[ 0.175041] apc_corner: 0 <--> 0 mV
[ 0.177674] qup_i2c f9923000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.178942] kworker/u:1 used greatest stack depth: 6144 bytes left
[ 0.180704] qup_i2c f9927000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.182749] qup_i2c f9928000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.185070] qup_i2c f9925000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.188937] sps:sps is ready.
[ 0.190664] gdsc_vfe:
[ 0.191112] gdsc_oxili_cx:
[ 0.191741] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[ 0.193140] msm_bus_fabric fc478000.msm-mmss-noc: msmbus_coresight initialized
[ 0.194222] msm_bus_fabric fc460000.msm-sys-noc: msmbus_coresight initialized
[ 0.195109] msm_bus_fabric fc468000.msm-periph-noc: msmbus_coresight initialized
[ 0.196632] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 5120
[ 0.197368] msm_bus_fabric fc380000.msm-bimc: msmbus_coresight initialized
[ 0.229947] bio: create slab <bio-0> at 0
[ 0.231158] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
[ 0.231762] ION heap vmalloc created
[ 0.231927] ION heap kmalloc created
[ 0.231987] ION heap iommu created
[ 0.232017] ION heap qsecom created
[ 0.232053] ION heap pil_1 created at 0x0c500000 with size 1300000
[ 0.232098] ION heap pil_2 created at 0x08800000 with size 3d00000
[ 0.233571] Linux media interface: v0.10
[ 0.233664] Linux video capture interface: v2.00
[ 0.235344] msm_iommu_dev_v0: lpass_iommu enabled remote spinlock
[ 0.236509] msm_iommu_dev_v0: device lpass_iommu mapped at c88e0000, with 4 ctx banks
[ 0.238869] msm_iommu_dev_v0: device copss_iommu mapped at c8960000, with 8 ctx banks
[ 0.239657] msm_iommu_dev_v0: device mdpe_iommu mapped at c8b20000, with 2 ctx banks
[ 0.240368] msm_iommu_dev_v0: device mdps_iommu mapped at c8b40000, with 2 ctx banks
[ 0.241370] msm_iommu_dev_v0: device gfx_iommu mapped at c8b60000, with 3 ctx banks
[ 0.241814] msm_iommu_dev_v0: device vfe_iommu mapped at c8b80000, with 1 ctx banks
[ 0.243071] msm_iommu_ctx fd000000.qcom,iommu-ctx: context q6_fw using bank 0
[ 0.243358] msm_iommu_ctx fd001000.qcom,iommu-ctx: context audio_shared using bank 1
[ 0.243564] msm_iommu_ctx fd002000.qcom,iommu-ctx: context video_shared using bank 2
[ 0.243820] msm_iommu_ctx fd003000.qcom,iommu-ctx: context q6_spare using bank 3
[ 0.244054] msm_iommu_ctx fd010000.qcom,iommu-ctx: context copss_0 using bank 0
[ 0.244261] msm_iommu_ctx fd011000.qcom,iommu-ctx: context copss_1 using bank 1
[ 0.244640] msm_iommu_ctx fd012000.qcom,iommu-ctx: context copss_2 using bank 2
[ 0.245076] msm_iommu_ctx fd013000.qcom,iommu-ctx: context copss_3 using bank 3
[ 0.245287] msm_iommu_ctx fd014000.qcom,iommu-ctx: context copss_4 using bank 4
[ 0.245495] msm_iommu_ctx fd015000.qcom,iommu-ctx: context copss_5 using bank 5
[ 0.245709] msm_iommu_ctx fd016000.qcom,iommu-ctx: context copss_6 using bank 6
[ 0.245915] msm_iommu_ctx fd017000.qcom,iommu-ctx: context copss_7 using bank 7
[ 0.246156] msm_iommu_ctx fd860000.qcom,iommu-ctx: context mdpe_0 using bank 0
[ 0.246363] msm_iommu_ctx fd861000.qcom,iommu-ctx: context mdpe_1 using bank 1
[ 0.246586] msm_iommu_ctx fd870000.qcom,iommu-ctx: context mdps_0 using bank 0
[ 0.246804] msm_iommu_ctx fd871000.qcom,iommu-ctx: context mdps_1 using bank 1
[ 0.247135] msm_iommu_ctx fd880000.qcom,iommu-ctx: context gfx3d_user using bank 0
[ 0.247524] msm_iommu_ctx fd881000.qcom,iommu-ctx: context gfx3d_priv using bank 1
[ 0.247739] msm_iommu_ctx fd882000.qcom,iommu-ctx: context gfx3d_spare using bank 2
[ 0.248030] msm_iommu_ctx fd890000.qcom,iommu-ctx: context vfe0 using bank 0
[ 0.248355] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.249485] Bluetooth: Core ver 2.16
[ 0.249639] NET: Registered protocol family 31
[ 0.249651] Bluetooth: HCI device and connection manager initialized
[ 0.249667] Bluetooth: HCI socket layer initialized
[ 0.249680] Bluetooth: L2CAP socket layer initialized
[ 0.250041] Bluetooth: SCO socket layer initialized
[ 0.250463] cfg80211: Calling CRDA to update world regulatory domain
[ 0.250514] cfg80211: World regulatory domain updated:
[ 0.250526] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.250543] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.250559] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.250574] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 0.250590] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.250605] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.251274] Switching to clocksource arch_sys_counter
[ 0.304689] NET: Registered protocol family 2
[ 0.305139] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.306664] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.309923] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[ 0.310368] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.310382] TCP: reno registered
[ 0.310500] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.310630] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.311090] NET: Registered protocol family 1
[ 0.311730] Trying to unpack rootfs image as initramfs...
[ 0.354978] Freeing initrd memory: 448K
[ 0.360483] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
[ 0.361541] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
[ 0.361762] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
[ 0.362742] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
[ 0.362945] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
[ 0.363981] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
[ 0.364224] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
[ 0.365327] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
[ 0.365536] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
[ 0.366612] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
[ 0.366847] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
[ 0.367952] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
[ 0.368157] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
[ 0.369290] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
[ 0.370917] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
[ 0.375860] pil_pronto fb21b000.qcom,pronto: using secure boot
[ 0.385177] NET: Registered protocol family 27
[ 0.387726] platform qcom,msm-audio-ion.30: Driver msm-audio-ion requests probe deferral
[ 0.392896] find_cur_cpu_level: CPUs are running at an unknown rate. Defaulting to 1190400 KHz.
[ 0.393197] cpufreq_table_init: CPU: 6 scaling frequencies supported.
[ 0.394409] msm_rpmrbcpr_memalloc: Invalid num corners 4, num recmnds 3
[ 0.394442] msm_rpmrbcpr_stats: probe of fc000000.qcom,rpm-rbcpr-stats failed with error -14
[ 0.394828] msm_rpm_log_probe: OK
[ 0.406769] audit: initializing netlink socket (disabled)
[ 0.406821] type=2000 audit(0.390:1): initialized
[ 0.524584] fuse init (API version 7.18)
[ 0.525062] msgmni has been set to 792
[ 0.527553] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.527566] io scheduler noop registered
[ 0.527574] io scheduler deadline registered
[ 0.527593] io scheduler row registered
[ 0.527772] io scheduler cfq registered (default)
[ 0.527780] io scheduler test-iosched registered
[ 0.528065] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc0 incorrect owner 2
[ 0.528153] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc1 incorrect owner 5
[ 0.528234] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc2 incorrect owner 4
[ 0.528314] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc3 incorrect owner 2
[ 0.528448] gpiochip_add: registered GPIOs 572 to 575 on device: pm8110-gpio
[ 0.528778] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa3 incorrect owner 2
[ 0.528912] gpiochip_add: registered GPIOs 570 to 571 on device: pm8110-mpp
[ 0.530890] mdss_dsi_panel_init: Panel Name = TIANMA OTM9605A QHD video mode dsi panel
[ 0.531116] mdss_dsi_panel_init:977 Continuous splash flag enabled.
[ 0.531127] mdss_dsi_panel_init:989 Partial update disabled.
[ 0.531184] dsi_parse_gpio:156, Disp_en gpio not specified
[ 0.531761] mdss_register_panel: adding framebuffer device fdd00000.qcom,mdss_dsi
[ 0.563791] mdss_fb_register: FrameBuffer[0] 540x960 size=0 registered successfully!
[ 0.605613] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
[ 0.605635] AXI: get_pdata(): Error: Client name not found
[ 0.605644] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[ 0.605651] msm_serial_hsl_probe: Bus scaling is disabled
[ 0.605774] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
[ 0.605837] msm_hsl_console_setup: console setup on port #0
[ 1.901375] msm_thermal: Limiting cpu0 max frequency to 787200
[ 1.901974] msm_thermal: Limiting cpu1 max frequency to 787200
[ 1.902127] msm_thermal: Limiting cpu2 max frequency to 787200
[ 1.902279] msm_thermal: Limiting cpu3 max frequency to 787200
[ 2.151452] msm_thermal: Limiting cpu0 max frequency to 384000
[ 2.151939] msm_thermal: Limiting cpu1 max frequency to 384000
[ 2.152251] msm_thermal: Limiting cpu2 max frequency to 384000
[ 2.152562] msm_thermal: Limiting cpu3 max frequency to 384000
[ 2.166399] cpr_irq_handler: IRQ_STATUS = 0x05
[ 2.166423] cpr_scale: last_volt[corner:1] = 1050000 uV
[ 2.166445] cpr_scale: Down: cpr status = 0x00006dfd (error_steps=15)
[ 2.166469] cpr_scale: [corn:1] @ floor: 1050000 <= 1050000: NACK
[ 2.235016] console [ttyHSL0] enabled
[ 2.239801] msm_serial_hsl_init: driver initialized
[ 2.255636] diagchar initialized now
[ 2.265243] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
[ 2.304674] brd: module loaded
[ 2.318412] loop: module loaded
[ 2.321709] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
[ 2.325566] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
[ 2.331119] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x0
[ 2.336889] QSEECOM: qseecom_probe: secure app region addr=0xda00000 size=0x100000
[ 2.345807] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[ 2.351811] i2c-core: driver [tabla-i2c-core] using legacy resume method
[ 2.358863] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[ 2.365431] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[ 2.373690] sps: BAM device 0xf9904000 is not registered yet.
[ 2.378430] sps:BAM 0xf9904000 is registered.
[ 2.383451] sps:BAM 0xf9904000 (va:0xc8be0000) enabled: ver:0x15, number of pipes:24
[ 2.391632] spi_qsd f9926000.spi: master is unqueued, this is deprecated
[ 2.400377] tun: Universal TUN/TAP device driver, 1.6
[ 2.404458] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 2.410828] rmnet_init: BAM devices[9]
[ 2.439869] PPP generic driver version 2.4.2
[ 2.443587] PPP BSD Compression module registered
[ 2.447802] PPP Deflate Compression module registered
[ 2.455012] PPP MPPE Compression module registered
[ 2.458784] NET: Registered protocol family 24
[ 2.464088] wcnss_wlan probed in built-in mode
[ 2.474704] msm_otg f9a55000.usb: msm_otg probe
[ 2.479217] msm_otg f9a55000.usb: OTG regs = c8942000
[ 2.489672] msm_otg f9a55000.usb: phy_reset: success
[ 2.494647] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
[ 2.501536] mbim_init: initialize 1 instances
[ 2.505139] mbim_init: Initialized 1 ports
[ 2.515186] rndis_qc_init: initialize rndis QC instance
[ 2.521408] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.527265] android_usb gadget: Number of LUNs=3
[ 2.531932] lun0: LUN: removable file: (no medium)
[ 2.536728] lun1: LUN: removable read only CD-ROM file: (no medium)
[ 2.543128] lun2: LUN: removable file: (no medium)
[ 2.549000] android_usb gadget: android_usb ready
[ 2.556801] [himax] himax_ts_init
[ 2.559173] wxun: himax_ts_probe: irq set here
[ 2.563773] [HIMAX PORTING MSG]himax_ts_probe ts->client->irq =330
[ 2.569774] wxun: himax_ts_probe: reset set here
[ 2.574506] ------------[ cut here ]------------
[ 2.579085] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[ 2.589729] autorequest GPIO-0
[ 2.592768] Modules linked in:
[ 2.595842] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[ 2.605291] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[ 2.614841] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[ 2.624479] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[ 2.634547] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c05355c8>] (himax_ts_probe+0x174/0xc64)
[ 2.644179] [<c05355c8>] (himax_ts_probe+0x174/0xc64) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[ 2.653294] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[ 2.662753] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[ 2.672132] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[ 2.681159] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[ 2.690184] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[ 2.699214] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[ 2.708589] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[ 2.718049] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[ 2.726905] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[ 2.735696] ---[ end trace 9fe215f2a85bcb15 ]---
[ 3.062293] qup_i2c f9923000.i2c: QUP: I2C status flags :0x81343c8, irq:127
[ 3.068279] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[ 3.091606] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[ 3.097501] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[ 3.121600] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[ 3.127495] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[ 3.151475] [TP] i2c_himax_read: i2c_read_block retry over 3
[ 3.156110] himax_ts_probe other driver has been loaded
[ 3.161608] msg26xx: msg26xx_ts_init
[ 3.164962] msg26xx: TPD probe
[ 3.167914] ------------[ cut here ]------------
[ 3.172533] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[ 3.183191] autorequest GPIO-0
[ 3.186228] Modules linked in:
[ 3.189296] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[ 3.198751] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[ 3.208302] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[ 3.217940] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[ 3.228006] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c0538984>] (tpd_probe+0x3c/0x748)
[ 3.237119] [<c0538984>] (tpd_probe+0x3c/0x748) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[ 3.245713] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[ 3.255172] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[ 3.264552] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[ 3.273577] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[ 3.282603] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[ 3.291632] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[ 3.301008] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[ 3.310466] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[ 3.319323] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[ 3.328072] ---[ end trace 9fe215f2a85bcb16 ]---
[ 3.671609] qup_i2c f9923000.i2c: QUP: I2C status flags :0x81383c8, irq:127
[ 3.677595] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[ 3.683914] _msg_WriteI2CSeq error -107,addr = 38
[ 3.688486] msg26xx: _msg_GetVersion ret = -107
[ 3.721600] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[ 3.727494] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[ 3.733812] _msg_WriteI2CSeq error -107,addr = 38
[ 3.738387] msg26xx: _msg_GetVersion ret = -107
[ 3.771598] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[ 3.777492] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[ 3.783811] _msg_WriteI2CSeq error -107,addr = 38
[ 3.788385] msg26xx: _msg_GetVersion ret = -107
[ 3.821413] msg26xx: may be there is not msg26xx tp
[ 3.825382] msg26xx: probe of 1-0026 failed with error 19
[ 3.830994] FTS: ft5x0x_ts_probe enter
[ 3.834605] FTS: irq = 330
[ 3.901455] msm_thermal: Limiting cpu0 max frequency to 787200
[ 3.906665] msm_thermal: Limiting cpu1 max frequency to 787200
[ 3.912258] msm_thermal: Limiting cpu2 max frequency to 787200
[ 3.917919] cpr_irq_handler: IRQ_STATUS = 0x05
[ 3.918051] msm_thermal: Limiting cpu3 max frequency to 787200
[ 3.928171] cpr_scale: last_volt[corner:2] = 1050000 uV
[ 3.933368] cpr_scale: Down: cpr status = 0x0000387d (error_steps=15)
[ 3.939768] cpr_scale: [corn:2] @ floor: 1050000 <= 1050000: NACK
[ 4.262263] FTS: --------ft5x0x_read_version---------fwversion=b,module=5d
[ 4.268966] input: ft5x0x_ts as /devices/virtual/input/input0
[ 4.431589] ft5x0x_ts 1-0038: Create proc entry success!
[ 4.436339] FTS: Firmware version = 0xb
[ 4.440234] FTS: report rate is 100Hz.
[ 4.444088] FTS: touch threshold is 48.
[ 4.447806] input: proximity as /devices/f9923000.i2c/i2c-1/1-0038/input/input1
[ 4.454979] FTS: tp_prox_setup_polled_device, err=0, poll-interval=100
[ 4.461426] Successfully added driver ft5x0x_ts
[ 4.465809] ctp_selftest_init
[ 4.468883] create_proc_entry g_ctp_selftest_proc success
[ 4.474176] ctp_upgrade_init
[ 4.477132] [elan] create_proc_entry 222 success
[ 4.481651] create_proc_entry success
[ 4.485253] ctp_if_upgrade_init
[ 4.488502] ctp_if_upgrade_init create_proc_entry 222 success
[ 4.494151] create_proc_entry success
[ 4.497762] create_proc_entry success
[ 4.501503] bma2x2_probe:
[ 4.531948] bma2x2_probe: chipid=20f8
[ 4.534899] input: accelerometer as /devices/f9925000.i2c/i2c-0/0-0018/input/input2
[ 4.542405] bma2x2_disable,start
[ 4.546410] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1426, h:m:s == 0:23:46, d/m/y = 1/0/70
[ 4.553725] qcom,qpnp-rtc qpnp-rtc-de559800: Alarm set for - h:r:s=0:0:0, d/m/y=1/0/70
[ 4.561626] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1426, h:m:s == 0:23:46, d/m/y = 1/0/70
[ 4.570256] using rtc device, qpnp_rtc, for alarms
[ 4.574471] qcom,qpnp-rtc qpnp-rtc-de559800: rtc core: registered qpnp_rtc as rtc0
[ 4.582368] qcom,qpnp-rtc qpnp-rtc-de559800: Probe success !!
[ 4.587926] i2c /dev entries driver
[ 4.600689] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[ 4.606598] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[ 4.613732] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[ 4.620210] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[ 4.627951] s5k4e1_init_module:153
[ 4.630858] s5k4e1_init_module:158 rc -19
[ 4.635642] zgc2235_init_module:141
[ 4.638616] zgc2235_init_module:146 rc -19
[ 4.642257] msm_sensor_i2c_probe gc2235_i2c_probe called
[ 4.647465] msm_sensor_i2c_probe: of_node exisists
[ 4.652103] msm_sensor_get_dt_data qcom,sensor-name gc2235, rc 0
[ 4.658234] msm_sensor_get_dt_data qcom,sensor-mode 0, rc 0
[ 4.663871] msm_sensor_get_dt_data qcom,sensor-position 1, rc 0
[ 4.669690] msm_sensor_get_dt_data qcom,mount-angle 270, rc 0
[ 4.675450] msm_sensor_get_dt_data qcom,cci-master 0, rc 0
[ 4.680890] msm_sensor_get_sub_module_index:75 src_node NULL
[ 4.686558] msm_sensor_get_sub_module_index:92 eeprom src_node NULL
[ 4.692831] msm_sensor_get_sub_module_index qcom,led flash cell index 1, rc 0
[ 4.699904] msm_sensor_get_sub_module_index csiphy_core[0] = 1
[ 4.705747] msm_sensor_get_sub_module_index csid_core[0] = 1
[ 4.711389] msm_sensor_get_dt_csi_data qcom,csi-lane-assign e4, rc 0
[ 4.717694] msm_sensor_get_dt_csi_data qcom,csi-lane-mask 3, rc 0
[ 4.723798] msm_sensor_get_dt_vreg_data qcom,cam-vreg-name count 3
[ 4.729935] msm_sensor_get_dt_vreg_data reg_name[0] = cam_vdig
[ 4.735777] msm_sensor_get_dt_vreg_data reg_name[1] = cam_vio
[ 4.741506] msm_sensor_get_dt_vreg_data reg_name[2] = cam_vana
[ 4.747296] msm_sensor_get_dt_vreg_data cam_vreg[0].type = 0
[ 4.752963] msm_sensor_get_dt_vreg_data cam_vreg[1].type = 0
[ 4.758576] msm_sensor_get_dt_vreg_data cam_vreg[2].type = 0
[ 4.764249] msm_sensor_get_dt_vreg_data cam_vreg[0].min_voltage = 1800000
[ 4.770990] msm_sensor_get_dt_vreg_data cam_vreg[1].min_voltage = 1800000
[ 4.777788] msm_sensor_get_dt_vreg_data cam_vreg[2].min_voltage = 2850000
[ 4.784562] msm_sensor_get_dt_vreg_data cam_vreg[0].max_voltage = 1800000
[ 4.791302] msm_sensor_get_dt_vreg_data cam_vreg[1].max_voltage = 1800000
[ 4.798101] msm_sensor_get_dt_vreg_data cam_vreg[2].max_voltage = 2850000
[ 4.804874] msm_sensor_get_dt_vreg_data cam_vreg[0].op_mode = 200000
[ 4.811181] msm_sensor_get_dt_vreg_data cam_vreg[1].op_mode = 200000
[ 4.817545] msm_sensor_get_dt_vreg_data cam_vreg[2].op_mode = 80000
[ 4.823848] msm_sensor_get_dt_data gpio count 3
[ 4.828294] msm_sensor_get_dt_data gpio_array[0] = 13
[ 4.833360] msm_sensor_get_dt_data gpio_array[1] = 15
[ 4.838367] msm_sensor_get_dt_data gpio_array[2] = 85
[ 4.843424] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].gpio = 13
[ 4.850070] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].gpio = 15
[ 4.856783] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].gpio = 85
[ 4.863468] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].flags = 1
[ 4.870122] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].flags = 0
[ 4.876833] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].flags = 0
[ 4.883521] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].label = CAMIF_MCLK
[ 4.890957] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].label = CAM_RESET
[ 4.898364] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].label = CAM_STANDBY
[ 4.905923] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 15
[ 4.911514] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 85
[ 4.917012] msm_sensor_get_dt_actuator_data qcom,actuator-cam-name 0, rc -22
[ 4.924066] msm_sensor_get_dt_data qcom,misc_regulator (null), rc -22
[ 4.930455] msm_sensor_power_up:991
[ 4.933973] msm_sensor_power_up index 0
[ 4.937743] msm_sensor_power_up type 2
[ 4.952992] msm_sensor_power_up index 1
[ 4.955789] msm_sensor_power_up type 2
[ 4.970944] msm_sensor_power_up index 2
[ 4.973771] msm_sensor_power_up type 2
[ 4.988834] msm_sensor_power_up index 3
[ 4.991661] msm_sensor_power_up type 0
[ 5.001440] msm_sensor_power_up index 4
[ 5.004234] msm_sensor_power_up type 1
[ 5.051398] msm_sensor_power_up index 5
[ 5.054192] msm_sensor_power_up type 1
[ 5.101372] msm_sensor_power_up index 6
[ 5.104168] msm_sensor_power_up type 1
[ 5.151372] msm_sensor_power_up index 7
[ 5.154167] msm_sensor_power_up type 1
[ 5.201371] msm_sensor_power_up index 8
[ 5.204167] msm_sensor_power_up type 3
[ 5.208208] qup_i2c f9928000.i2c: QUP: I2C status flags :0x1363c8, irq:132
[ 5.214785] qup_i2c f9928000.i2c: I2C slave addr:0x21 not connected
[ 5.221033] msm_sensor_match_id: gc2235: read id failed
[ 5.226249] msm_sensor_power_up:1095 match id failed rc -107
[ 5.231885] msm_sensor_power_up:1102 failed
[ 5.236024] msm_sensor_power_up index 8
[ 5.239842] msm_sensor_power_up type 3
[ 5.243603] msm_sensor_power_up index 7
[ 5.247395] msm_sensor_power_up type 1
[ 5.291371] msm_sensor_power_up index 6
[ 5.294166] msm_sensor_power_up type 1
[ 5.341372] msm_sensor_power_up index 5
[ 5.344166] msm_sensor_power_up type 1
[ 5.391371] msm_sensor_power_up index 4
[ 5.394165] msm_sensor_power_up type 1
[ 5.441371] msm_sensor_power_up index 3
[ 5.444167] msm_sensor_power_up type 0
[ 5.453946] msm_sensor_power_up index 2
[ 5.456742] msm_sensor_power_up type 2
[ 5.471805] msm_sensor_power_up index 1
[ 5.474600] msm_sensor_power_up type 2
[ 5.489689] msm_sensor_power_up index 0
[ 5.492515] msm_sensor_power_up type 2
[ 5.507587] msm_sensor_i2c_probe gc2235 power up failed
[ 5.511820] gc2235: probe of 6-0078 failed with error -107
[ 5.521730] lirc_dev: IR Remote Control driver registered, major 241
[ 5.527133] IR NEC protocol handler initialized
[ 5.531680] IR RC5(x) protocol handler initialized
[ 5.536420] IR RC6 protocol handler initialized
[ 5.540935] IR JVC protocol handler initialized
[ 5.545477] IR Sony protocol handler initialized
[ 5.550049] IR RC5 (streamzap) protocol handler initialized
[ 5.555632] IR SANYO protocol handler initialized
[ 5.560292] IR MCE Keyboard/mouse protocol handler initialized
[ 5.566134] IR LIRC bridge handler initialized
[ 5.571384] BMS: qpnp_bms_init: QPNP BMS INIT
[ 5.574985] spmi qpnp-bms-de559600: Driver qcom,qpnp-bms requests probe deferral
[ 5.582493] spmi qpnp-charger-de558800: Driver qcom,qpnp-charger requests probe deferral
[ 5.629443] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 5.638568] cpuidle: using governor ladder
[ 5.642582] cpuidle: using governor menu
[ 5.645603] sdhci: Secure Digital Host Controller Interface driver
[ 5.651729] sdhci: Copyright(c) Pierre Ossman
[ 5.656679] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.662297] AXI: get_pdata(): Error: Client name not found
[ 5.667146] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[ 5.676217] mmc0: no vmmc regulator found
[ 5.681667] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
[ 5.687718] AXI: get_pdata(): Error: Client name not found
[ 5.692834] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[ 5.702228] mmc1: no vmmc regulator found
[ 5.707652] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
[ 5.715940] zram: Created 1 device(s) ...
[ 5.723928] ashmem: initialized
[ 5.726189] logger: created 256K log 'log_main'
[ 5.732741] logger: created 256K log 'log_events'
[ 5.738559] logger: created 256K log 'log_radio'
[ 5.744333] logger: created 256K log 'log_system'
[ 5.754929] sps:BAM 0xf9a44000 is registered.
[ 5.760108] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
[ 5.770859] PMIC@SID0 Power-on reason: Triggered from SMPL (sudden momentary power loss) and 'cold' boot
[ 5.779720] input: qpnp_pon as /devices/virtual/input/input3
[ 5.786009] PMIC@SID0: PM8110 v2.0 options: 0, 0, 0, 0
[ 5.790542] coresight-fuse fc4be024.fuse: Fuse initialized
[ 5.796333] coresight-cti fc310000.cti: CTI initialized
[ 5.801004] coresight-cti fc311000.cti: CTI initialized
[ 5.806236] coresight-cti fc312000.cti: CTI initialized
[ 5.811486] coresight-cti fc313000.cti: CTI initialized
[ 5.816616] coresight-cti fc314000.cti: CTI initialized
[ 5.821882] coresight-cti fc315000.cti: CTI initialized
[ 5.827065] coresight-cti fc316000.cti: CTI initialized
[ 5.832327] coresight-cti fc317000.cti: CTI initialized
[ 5.837492] coresight-cti fc318000.cti: CTI initialized
[ 5.842775] coresight-cti fc351000.cti: CTI initialized
[ 5.847909] coresight-cti fc352000.cti: CTI initialized
[ 5.853142] coresight-cti fc353000.cti: CTI initialized
[ 5.858287] coresight-cti fc354000.cti: CTI initialized
[ 5.863369] mmc0: BKOPS_EN bit = 0
[ 5.863585] coresight-cti fc335000.cti: CTI initialized
[ 5.863807] coresight-cti fc338000.cti: CTI initialized
[ 5.864040] coresight-cti fc33c000.cti: CTI initialized
[ 5.864261] coresight-cti fc360000.cti: CTI initialized
[ 5.864947] coresight-csr fc301000.csr: CSR initialized
[ 5.896644] coresight-tmc fc326000.tmc: Byte Counter feature enabled
[ 5.902126] sps:BAM 0xfc37c000 is registered.
[ 5.906543] coresight-tmc fc326000.tmc: TMC initialized
[ 5.912640] coresight-tmc fc325000.tmc: TMC initialized
[ 5.918124] coresight-tpiu fc320000.tpiu: seta gpios not specified
[ 5.923327] coresight-tpiu fc320000.tpiu: setb gpios not specified
[ 5.929474] mmc0: new HS200 MMC card at address 0001
[ 5.929593] coresight-tpiu fc320000.tpiu: TPIU initialized
[ 5.930324] coresight-funnel fc323000.funnel: FUNNEL initialized
[ 5.930530] coresight-funnel fc321000.funnel: FUNNEL initialized
[ 5.930749] coresight-funnel fc322000.funnel: FUNNEL initialized
[ 5.930956] coresight-funnel fc355000.funnel: FUNNEL initialized
[ 5.931730] coresight-replicator fc324000.replicator: REPLICATOR initialized
[ 5.932626] coresight-stm fc302000.stm: STM initialized
[ 5.933362] coresight-hwevent fd820018.hwevent: Hardware Event driver initialized
[ 5.934354] coresight-etm fc34c000.etm: ETM initialized
[ 5.989156] coresight-etm fc34d000.etm: ETM initialized
[ 5.994142] mmcblk0: mmc0:0001 H4G1d 3.64 GiB
[ 5.994607] coresight-etm fc34e000.etm: ETM initialized
[ 5.995105] coresight-etm fc34f000.etm: ETM initialized
[ 5.995907] coresight-audio-etm audio_etm0.1: Audio ETM initialized
[ 5.996641] coresight-modem-etm modem_etm0.2: Modem ETM initialized
[ 5.997342] coresight-wcn-etm wcn_etm0.3: Wireless ETM initialized
[ 5.998047] coresight-rpm-etm rpm_etm0.4: RPM ETM initialized
[ 5.999708] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 5.999735] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.010694] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
[ 6.011574] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
[ 6.012748] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[ 6.013353] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[ 6.017684] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 6.018213] Netfilter messages via NETLINK v0.30.
[ 6.018329] nf_conntrack version 0.5.0 (6339 buckets, 25356 max)
[ 6.019420] ctnetlink v0.93: registering with nfnetlink.
[ 6.019943] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 6.019955] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 6.020351] xt_time: kernel timezone is -0000
[ 6.020978] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.021535] arp_tables: (C) 2002 David S. Miller
[ 6.021637] TCP: cubic registered
[ 6.022851] NET: Registered protocol family 10
[ 6.027736] Mobile IPv6
[ 6.027794] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 6.028075] IPv6 over IPv4 tunneling driver
[ 6.029085] NET: Registered protocol family 17
[ 6.029223] Bridge firewalling registered
[ 6.029248] Ebtables v2.0 registered
[ 6.160063] Bluetooth: RFCOMM TTY layer initialized
[ 6.164912] Bluetooth: RFCOMM socket layer initialized
[ 6.164983] mmcblk0rpmb: mmc0:0001 H4G1d partition 3 4.00 MiB
[ 6.168656] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22
[ 6.184893] Bluetooth: RFCOMM ver 1.11
[ 6.188546] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.193871] Bluetooth: BNEP filters: protocol multicast
[ 6.199054] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 6.205622] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[ 6.212676] Registering SWP/SWPB emulation handler
[ 6.225727] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 6.232320] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[ 6.234023] input: gpio-keys as /devices/gpio_keys.60/input/input4
[ 6.234620] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[ 6.253406] qcom,qpnp-rtc qpnp-rtc-de559800: setting system clock to 1970-01-01 00:23:48 UTC (1428)
[ 6.253420] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[ 6.253448] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[ 6.253788] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[ 6.253799] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[ 6.253821] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[ 6.253938] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 6.253961] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.259199] batfet:
[ 6.270737] qcom,qpnp-charger:qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 0, dc = 0 b_health = 0 batt_present = 7
[ 6.304979] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[ 6.336939] msm_otg f9a55000.usb: USB in low power mode
[ 6.339559] clock_late_init: Removing enables held for handed-off clocks
[ 6.344245] ALSA device list:
[ 6.344255] No soundcards found.齕 6.355967] Freeing init memory: 72K
[ 6.372904] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[ 6.410415] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[ 6.417798] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[ 6.426439] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[ 6.450636] type=1403 audit(1428.700:2): policy loaded auid=4294967295 ses=4294967295
[ 6.457817] SELinux: Loaded policy from (null)
[ 6.468666] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[ 6.470211] init: /init.qcom.rc: 259: ignored duplicate definition of service 'usbhub_init'
[ 6.471284] init: /init.qcom.rc: 672: invalid command '/system/bin/log'
[ 6.475289] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[ 6.483294] init: invalid uid 'fm_radio'
[ 6.503515] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[ 6.511773] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[ 6.546834] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[ 6.554221] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[ 6.562434] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[ 6.601999] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[ 6.644838] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[ 6.658415] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[ 6.661476] msm_thermal: Max frequency reset for cpu0
[ 6.664512] msm_thermal: Max frequency reset for cpu1
[ 6.664669] msm_thermal: Max frequency reset for cpu2
[ 6.664823] msm_thermal: Max frequency reset for cpu3
[ 6.685979] BMS: qpnp_bms_probe: probe success: soc =100 vbatt = 3965148 ocv = 4064064 r_sense_uohm = 9406 warm_reset = 0
[ 6.697725] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 6.704130] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 6.711779] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.719581] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 6.726554] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.733965] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 7.177874] init: cannot open '/initlogo.rle'
[ 7.284128] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1
[ 7.356733] EXT4-fs (mmcblk0p22): recovery complete
[ 7.361481] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 7.381447] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
[ 7.428620] e2fsck used greatest stack depth: 5328 bytes left
[ 7.433423] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[ 7.437946] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 1008/131072 files, 49691/524288 blocks
[ 7.455344] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
[ 7.464494] init used greatest stack depth: 5296 bytes left
[ 7.476786] EXT4-fs (mmcblk0p14): recovery complete
[ 7.481529] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1
[ 7.489687] EXT4-fs (mmcblk0p21): <<<<<wzg Opt_gid
[ 7.499167] EXT4-fs (mmcblk0p21): recovery complete
[ 7.504002] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: gid=1015
[ 7.511417] SELinux: Context u:object_r:blinkfeed_file:s0 is not valid (left unmapped).
[ 7.525088] EXT4-fs (mmcblk0p13): recovery complete
[ 7.529821] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: barrier=1
[ 7.590997] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
[ 7.600962] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
[ 7.618929] pil-q6v5-lpass fe200000.qcom,lpass: adsp: loading from 0x0c500000 to 0x0d200000
[ 7.827097] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset
[ 7.879392] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Power/Clock ready interrupt received
[ 7.892935] pil-q6v5-lpass fe200000.qcom,lpass: Subsystem error monitoring/handling services are up
[ 7.901945] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 7.902174] diag: In diag_send_msg_mask_update, invalid status 0
[ 7.902189] diag: In diag_send_log_mask_update, invalid status 0
[ 7.902523] adsp-loader qcom,msm-adsp-loader.29: adsp_loader_do: Q6/ADSP image is loaded
[ 7.902803] apr_tal:Q6 Is Up
[ 7.931226] msm8x10-wcd-i2c-core 5-000d: adsp is ready
[ 7.936333] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdda-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
[ 7.936339]
[ 7.947745] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-px: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
[ 7.947754]
[ 7.959198] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-1p2v: vol=[1200000 1200000]uV, curr=[5000]uA, ond 0
[ 7.959205]
[ 7.970733] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdda-cp: vol=[1800000 2150000]uV, curr=[650000]uA, ond 1
[ 7.970740]
[ 7.982393] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-mic-bias: vol=[3075000 3075000]uV, curr=[25000]uA, ond 1
[ 7.982399]
[ 7.997129] wcd9xxx_core_res_init: num_irqs = 24, num_irq_regs = 3
[ 8.007010] msm8x10-wcd-i2c-core msm8x10_wcd_codec: msm8x10_wcd_i2c_probe: irq initialization passed
[ 8.016831] wcd9xxx_resmgr_init
[ 8.036170] wcd9xxx_mbhc_init: enter
[ 8.042879] wcd9xxx_mbhc_init: leave ret 0
[ 8.089896] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[ 8.096486] wcd9xxx_event_notify: leave
[ 8.101207] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[ 8.107853] wcd9xxx_event_notify: leave
[ 8.112602] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[ 8.119187] wcd9xxx_event_notify: leave
[ 8.127553] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[ 8.134163] wcd9xxx_event_notify: leave
[ 8.140807] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
[ 8.146140] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
[ 8.151962] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
[ 8.157537] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
[ 8.162886] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
[ 8.168408] asoc: snd-soc-dummy-dai <-> SEC_MI2S_RX_HOSTLESS mapping ok
[ 8.175106] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
[ 8.181160] asoc: msm-stub-rx <-> msm-dai-q6-dev.241 mapping ok
[ 8.187136] asoc: msm-stub-tx <-> msm-dai-q6-dev.240 mapping ok
[ 8.193190] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
[ 8.198848] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
[ 8.205001] asoc: snd-soc-dummy-dai <-> PRI_MI2S_TX_HOSTLESS mapping ok
[ 8.211763] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
[ 8.217496] asoc: snd-soc-dummy-dai <-> Voice2 mapping ok
[ 8.222846] asoc: snd-soc-dummy-dai <-> QCHAT mapping ok
[ 8.227958] msm8x10-wcd-i2c-core msm8x10_wcd_codec: dapm: unknown pin Lineout amp
[ 8.235423] asoc: msm8x10_wcd_i2s_rx1 <-> msm-dai-q6-mi2s.1 mapping ok
[ 8.242146] asoc: msm8x10_wcd_i2s_tx1 <-> msm-dai-q6-mi2s.0 mapping ok
[ 8.248463] asoc: msm-stub-rx <-> msm-dai-q6-dev.12288 mapping ok
[ 8.254531] asoc: msm-stub-tx <-> msm-dai-q6-dev.12289 mapping ok
[ 8.260619] asoc: msm-stub-rx <-> msm-dai-q6-dev.12292 mapping ok
[ 8.266733] asoc: msm-stub-tx <-> msm-dai-q6-dev.12293 mapping ok
[ 8.272766] asoc: msm-stub-rx <-> msm-dai-q6-dev.224 mapping ok
[ 8.278661] asoc: msm-stub-tx <-> msm-dai-q6-dev.225 mapping ok
[ 8.284585] asoc: msm-stub-tx <-> msm-dai-q6-dev.32772 mapping ok
[ 8.290659] asoc: msm-stub-tx <-> msm-dai-q6-dev.32771 mapping ok
[ 8.296730] asoc: msm-stub-rx <-> msm-dai-q6-dev.32773 mapping ok
[ 8.315131] input: Button Jack as /devices/sound.37/sound/card0/input5
[ 8.320995] input: Headset Jack as /devices/sound.37/sound/card0/input6
[ 8.372399] wcnss_wlan triggered by userspace
[ 8.401889] wcnss_trigger_config: adc get failed
[ 8.406938] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[ 8.415428] init: cannot find '/system/bin/nac_server', disabling 'nac_server'
[ 8.427465] pil_pronto fb21b000.qcom,pronto: wcnss: loading from 0x0d200000 to 0x0d6ee000
[ 8.428350] init: cannot find '/system/bin/qrngd', disabling 'qrngd'
[ 8.533875] ueventd used greatest stack depth: 4980 bytes left
[ 8.567888] init: cannot find '/system/bin/wiperiface', disabling 'wiperiface'
[ 8.580063] init: cannot find '/system/bin/ssr_diag', disabling 'ssr_diag'
shell@msm8610:/ $ [ 9.369596] diag: In diag_send_msg_mask_update, invalid status 0
[ 9.374899] diag: In diag_send_log_mask_update, invalid status 0
[ 9.384664] init: untracked pid 272 exited
[ 9.392227] msm_isp_close_node: halt timeout rc=0
[ 9.395648] enable_store: android_usb: already disabled
[ 9.410150] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 9.438894] Error: Driver 'DS' is already registered, aborting...
[ 9.448474] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 9.457786] msm_tsens_get_temp: tsens mapping index not found
[ 9.462788] msm_tsens_get_temp: tsens mapping index not found
[ 9.468325] msm_tsens_get_temp: tsens mapping index not found
[ 9.474669] msm_tsens_get_temp: tsens mapping index not found
[ 9.479768] msm_tsens_get_temp: tsens mapping index not found
[ 9.485586] msm_tsens_get_temp: tsens mapping index not found
[ 9.541569] init: untracked pid 382 exited
[ 9.570050] wcnss: no space available for smd frame
[ 9.600837] msm_audio_ion_import: DMA Buf name=audio_acdb_client, fd=18 handle=dac41a40
[ 9.611494] wcnss: no space available for smd frame
[ 9.641616] wcnss: no space available for smd frame
[ 9.671592] wcnss: no space available for smd frame
[ 9.711444] wcnss: not setting up vbatt
[ 9.731429] ------------[ cut here ]------------
[ 9.731470] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[ 9.731477] Unbalanced enable for IRQ 330
[ 9.731734] ---[ end trace 9fe215f2a85bcb18 ]---
[ 10.051420] ------------[ cut here ]------------
[ 10.051450] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[ 10.051458] Unbalanced enable for IRQ 330
[ 10.051759] ---[ end trace 9fe215f2a85bcb19 ]---
Android Bootloader - UART_DM Initialized!!!
[0] welcome to lk
[10] platform_init()
[10] target_init()
[30] Done initialization of the card
[130] Config MIPI_VIDEO_PANEL.
[130] mdss_dsi_panel_initialize: wxun: mipi_dsi.c--lane_swap=1
[140] mipi_panel_auto_detect:start
[150] otm9605A_read_reg_single: wxun, mipi_tianma_otm9605a_video_qhd.c reg=0xd202
[150] mipi_panel_auto_detect_otm9605A: lcdid=0x9605.
[160] mipi_tianma_otm9605A_panel_video_qhd_reinit: start
[160] mdss_dsi_config_reinit: lctlc: mipi_dsi.c
[330] Turn on MIPI_VIDEO_PANEL.
[340] Video lane tested successfully
[570] Backlight enable=1 failed
[570] pm8x41_get_is_cold_boot: cold boot
[570] target_pause_for_battery_charge : pon_reason is 2 cold_boot:1
[580] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
[590] Loading boot image (6486016): start
[660] Loading boot image (6486016): done
[670] ERROR: Unable to find suitable device tree for device (165/0x00010001/11/0)
[680] Using DTB entry 165/00010001/11/0 for device 165/00010001/11/0
[690] pm8x41_get_is_cold_boot: cold boot
[690] target_pause_for_battery_charge : pon_reason is 2 cold_boot:1
[690] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_vid[720] Updating device tree: start
[830] Updating device tree: done
[840] booting linux @ 0x8000, ramdisk @ 0x2000000 (459525), tags/device tree @ 0x1e00000
[840] Turn off MIPI_VIDEO_PANEL.
[840] Continuous splash enabled, keeping panel alive.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-g8218128-00704-g42fcf2d-dirty (xxx@soft111) (gcc version 4.7 (GCC) ) #5 SMP PREEMPT Mon Dec 30 21:01:18 CST 2013
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Qualcomm MSM 8610 (Flattened Device Tree), model: Qualcomm MSM 8610v2 QRD SKUAA
[ 0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-3a00000
[ 0.000000] Node qcom,msm-mem-hole removed memory 8800000-de00000
[ 0.000000] qcom,msm-rtb reserved EBI1 size 100000
[ 0.000000] memory pool 3 (start 0x1ff00000 size 100000) initialized
[ 0.000000] cma: CMA: reserved 16 MiB at 1ec00000
[ 0.000000] cma: Found qsecom_region, memory base 0, size 1 MiB
[ 0.000000] cma: CMA: reserved 4 MiB at 1e800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] IMEM DT static mapping successful
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c15c7000 s15872 r8192 d12800 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 107648
[ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_video lcm.id=0x9605
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 136MB 289MB = 425MB total
[ 0.000000] Memory: 384796k/384796k available, 51428k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xcde00000 - 0xe0000000 ( 290 MB)
[ 0.000000] vmalloc : 0xc8800000 - 0xcde00000 ( 86 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8800000 ( 136 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0c4f41c (12574 kB)
[ 0.000000] .init : 0xc0d00000 - 0xc0e12e00 (1100 kB)
[ 0.000000] .data : 0xc0e14000 - 0xc0ef8e08 ( 916 kB)
[ 0.000000] .bss : 0xc0ef8e2c - 0xc1113440 (2154 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] Console: colour dummy device 80x30
[ 0.000180] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000206] pid_max: default: 32768 minimum: 301
[ 0.000485] Security Framework initialized
[ 0.000536] SELinux: Initializing.
[ 0.000690] Mount-cache hash table entries: 512
[ 0.001987] Initializing cgroup subsys debug
[ 0.002004] Initializing cgroup subsys cpuacct
[ 0.002016] Initializing cgroup subsys freezer
[ 0.002069] CPU: Testing write buffer coherency: ok
[ 0.002571] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002660] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[ 0.005168] Setting up static identity map for 0x8a42f0 - 0x8a4354
[ 0.005205] Configuring XPU violations to be fatal errors
[ 0.005218] MSM Memory Dump table set up
[ 0.012619] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.018952] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.025290] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.025395] Brought up 4 CPUs
[ 0.025415] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.039715] dummy:
[ 0.056279] NET: Registered protocol family 16
[ 0.068816] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.070920] KPI: Bootloader start count = 23283
[ 0.070934] KPI: Bootloader end count = 51335
[ 0.070944] KPI: Bootloader display count = 34113
[ 0.070954] KPI: Bootloader load kernel count = 2449
[ 0.070966] KPI: Kernel MPM timestamp = 79258
[ 0.070975] KPI: Kernel MPM Clock frequency = 32768
[ 0.070999] socinfo_print: v8, id=165, ver=1.1, raw_id=2069, raw_ver=1, hw_plat=11, hw_plat_ver=196608
[ 0.071007] accessory_chip=0, hw_plat_subtype=0, pmic_model=65541, pmic_die_revision=131072
[ 0.085826] gpiochip_add: registered GPIOs 0 to 101 on device: msmgpio
[ 0.090679] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
[ 0.121161] 8110_s1: 500 <--> 1275 mV at 0 mV normal idle
[ 0.121847] 8110_s1_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.122524] 8110_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
[ 0.123193] 8110_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.123904] 8110_s3: 1200 <--> 1350 mV at 1200 mV normal idle
[ 0.124609] 8110_s4: 1800 <--> 2150 mV at 2150 mV normal idle
[ 0.125316] 8110_l1: 1225 mV normal idle
[ 0.126038] 8110_l2: 1200 mV normal idle
[ 0.126715] 8110_l3: 750 <--> 1275 mV at 0 mV normal idle
[ 0.127320] 8110_l3_ao: 750 <--> 1275 mV at 0 mV normal idle
[ 0.127960] 8110_l3_so: 750 <--> 1275 mV at 750 mV normal idle
[ 0.128934] 8110_l4: 1200 mV normal idle
[ 0.129593] 8110_l5: 1300 <--> 1350 mV at 1300 mV normal idle
[ 0.130278] 8110_l6: 1800 mV normal idle
[ 0.130975] 8110_l7: 2050 mV normal idle
[ 0.131681] 8110_l8: 1800 mV normal idle
[ 0.132355] 8110_l9: 2050 mV normal idle
[ 0.133075] 8110_l10: 1800 mV normal idle
[ 0.133721] 8110_l10_ao: 1800 mV normal idle
[ 0.134377] 8110_l10_so: 1800 mV normal idle
[ 0.135025] 8110_l12: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.136040] 8110_l14: 1800 mV normal idle
[ 0.136757] 8110_l15: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.137431] 8110_l16: 3000 <--> 3350 mV at 3000 mV normal idle
[ 0.138114] 8110_l17: 2900 mV normal idle
[ 0.138826] 8110_l18: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.139499] 8110_l19: 2850 mV normal idle
[ 0.140204] 8110_l20: 3075 mV normal idle
[ 0.140898] 8110_l21: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.141571] 8110_l22: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.143198] msm-thermal qcom,msm-thermal.51: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. KTM continues
[ 0.143583] vdd_restriction_reg_init:Defer vdd rstr freq init
[ 0.169358] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.169376] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.170063] msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized
[ 0.172092] 8110_s2: 900 <--> 1275 mV at 1150 mV
[ 0.172349] spm_regulator_probe: name=8110_s2, range=LV, voltage=1150000 uV, mode=AUTO, step rate=9600 uV/us
[ 0.173791] cpr_efuse_init: efuse_addr = 0xfc4b8000 (len=0x1000)
[ 0.173832] cpr_voltage_plan_init: [1] [1150000 1150000 1275000] uV
[ 0.173847] cpr_voltage_plan_init: [2] [1075000 1075000 1275000] uV
[ 0.173860] cpr_voltage_plan_init: [3] [1050000 1050000 1275000] uV
[ 0.173924] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[ 0.173969] cpr_pvs_init: [row:23] = 0xA0128513000002E0, n_bits=5, bin=11 (3)
[ 0.173984] cpr_pvs_init: pvs initial turbo voltage_= from 1275000 to 1275000
[ 0.174349] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[ 0.174399] cpr_init_cpr_efuse: [row:61] = 0x1250f115d9da8
[ 0.174420] cpr_init_cpr_efuse: disable = 0, local = 1
[ 0.174433] cpr_init_cpr_efuse: Corner[1]: ro_sel = 2, target quot = 482
[ 0.174446] cpr_init_cpr_efuse: Corner[2]: ro_sel = 2, target quot = 699
[ 0.174460] cpr_init_cpr_efuse: Corner[3]: ro_sel = 2, target quot = 949
[ 0.174515] cpr_init_cpr_parameters: CPR is enabled by default.
[ 0.174536] cpr_config: Timer count: 0x17700 (for 5000 us)
[ 0.174868] apc_corner: 0 <--> 0 mV
[ 0.177507] qup_i2c f9923000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.178776] kworker/u:1 used greatest stack depth: 6144 bytes left
[ 0.180544] qup_i2c f9927000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.182593] qup_i2c f9928000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.184940] qup_i2c f9925000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.188834] sps:sps is ready.
[ 0.190557] gdsc_vfe:
[ 0.191008] gdsc_oxili_cx:
[ 0.191634] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[ 0.193000] msm_bus_fabric fc478000.msm-mmss-noc: msmbus_coresight initialized
[ 0.194125] msm_bus_fabric fc460000.msm-sys-noc: msmbus_coresight initialized
[ 0.195004] msm_bus_fabric fc468000.msm-periph-noc: msmbus_coresight initialized
[ 0.196517] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 5120
[ 0.197226] msm_bus_fabric fc380000.msm-bimc: msmbus_coresight initialized
[ 0.229816] bio: create slab <bio-0> at 0
[ 0.231035] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
[ 0.231643] ION heap vmalloc created
[ 0.231807] ION heap kmalloc created
[ 0.231869] ION heap iommu created
[ 0.231898] ION heap qsecom created
[ 0.231934] ION heap pil_1 created at 0x0c500000 with size 1300000
[ 0.231980] ION heap pil_2 created at 0x08800000 with size 3d00000
[ 0.233451] Linux media interface: v0.10
[ 0.233544] Linux video capture interface: v2.00
[ 0.235215] msm_iommu_dev_v0: lpass_iommu enabled remote spinlock
[ 0.236371] msm_iommu_dev_v0: device lpass_iommu mapped at c88e0000, with 4 ctx banks
[ 0.238730] msm_iommu_dev_v0: device copss_iommu mapped at c8960000, with 8 ctx banks
[ 0.239524] msm_iommu_dev_v0: device mdpe_iommu mapped at c8b20000, with 2 ctx banks
[ 0.240239] msm_iommu_dev_v0: device mdps_iommu mapped at c8b40000, with 2 ctx banks
[ 0.241245] msm_iommu_dev_v0: device gfx_iommu mapped at c8b60000, with 3 ctx banks
[ 0.241689] msm_iommu_dev_v0: device vfe_iommu mapped at c8b80000, with 1 ctx banks
[ 0.242901] msm_iommu_ctx fd000000.qcom,iommu-ctx: context q6_fw using bank 0
[ 0.243088] msm_iommu_ctx fd001000.qcom,iommu-ctx: context audio_shared using bank 1
[ 0.243307] msm_iommu_ctx fd002000.qcom,iommu-ctx: context video_shared using bank 2
[ 0.243535] msm_iommu_ctx fd003000.qcom,iommu-ctx: context q6_spare using bank 3
[ 0.243750] msm_iommu_ctx fd010000.qcom,iommu-ctx: context copss_0 using bank 0
[ 0.243935] msm_iommu_ctx fd011000.qcom,iommu-ctx: context copss_1 using bank 1
[ 0.244270] msm_iommu_ctx fd012000.qcom,iommu-ctx: context copss_2 using bank 2
[ 0.244694] msm_iommu_ctx fd013000.qcom,iommu-ctx: context copss_3 using bank 3
[ 0.244884] msm_iommu_ctx fd014000.qcom,iommu-ctx: context copss_4 using bank 4
[ 0.245068] msm_iommu_ctx fd015000.qcom,iommu-ctx: context copss_5 using bank 5
[ 0.245324] msm_iommu_ctx fd016000.qcom,iommu-ctx: context copss_6 using bank 6
[ 0.245509] msm_iommu_ctx fd017000.qcom,iommu-ctx: context copss_7 using bank 7
[ 0.245773] msm_iommu_ctx fd860000.qcom,iommu-ctx: context mdpe_0 using bank 0
[ 0.245958] msm_iommu_ctx fd861000.qcom,iommu-ctx: context mdpe_1 using bank 1
[ 0.246172] msm_iommu_ctx fd870000.qcom,iommu-ctx: context mdps_0 using bank 0
[ 0.246356] msm_iommu_ctx fd871000.qcom,iommu-ctx: context mdps_1 using bank 1
[ 0.246659] msm_iommu_ctx fd880000.qcom,iommu-ctx: context gfx3d_user using bank 0
[ 0.246945] msm_iommu_ctx fd881000.qcom,iommu-ctx: context gfx3d_priv using bank 1
[ 0.247139] msm_iommu_ctx fd882000.qcom,iommu-ctx: context gfx3d_spare using bank 2
[ 0.247406] msm_iommu_ctx fd890000.qcom,iommu-ctx: context vfe0 using bank 0
[ 0.247582] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.248448] Bluetooth: Core ver 2.16
[ 0.248521] NET: Registered protocol family 31
[ 0.248531] Bluetooth: HCI device and connection manager initialized
[ 0.248547] Bluetooth: HCI socket layer initialized
[ 0.248561] Bluetooth: L2CAP socket layer initialized
[ 0.248879] Bluetooth: SCO socket layer initialized
[ 0.249326] cfg80211: Calling CRDA to update world regulatory domain
[ 0.249378] cfg80211: World regulatory domain updated:
[ 0.249390] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.249407] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.249422] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.249438] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 0.249453] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.249469] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.250129] Switching to clocksource arch_sys_counter
[ 0.303728] NET: Registered protocol family 2
[ 0.304203] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.305640] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.308905] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[ 0.309352] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.309366] TCP: reno registered
[ 0.309484] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.309609] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.310063] NET: Registered protocol family 1
[ 0.310706] Trying to unpack rootfs image as initramfs...
[ 0.353900] Freeing initrd memory: 448K
[ 0.359362] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
[ 0.360449] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
[ 0.360658] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
[ 0.361653] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
[ 0.361857] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
[ 0.362905] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
[ 0.363152] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
[ 0.364192] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
[ 0.364410] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
[ 0.365473] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
[ 0.365719] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
[ 0.366809] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
[ 0.367028] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
[ 0.368139] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
[ 0.369786] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
[ 0.374710] pil_pronto fb21b000.qcom,pronto: using secure boot
[ 0.383914] NET: Registered protocol family 27
[ 0.386537] platform qcom,msm-audio-ion.30: Driver msm-audio-ion requests probe deferral
[ 0.391746] find_cur_cpu_level: CPUs are running at an unknown rate. Defaulting to 1190400 KHz.
[ 0.392053] cpufreq_table_init: CPU: 6 scaling frequencies supported.
[ 0.393262] msm_rpmrbcpr_memalloc: Invalid num corners 4, num recmnds 3
[ 0.393296] msm_rpmrbcpr_stats: probe of fc000000.qcom,rpm-rbcpr-stats failed with error -14
[ 0.393681] msm_rpm_log_probe: OK
[ 0.405747] audit: initializing netlink socket (disabled)
[ 0.405798] type=2000 audit(0.390:1): initialized
[ 0.523608] fuse init (API version 7.18)
[ 0.524101] msgmni has been set to 792
[ 0.526188] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.526202] io scheduler noop registered
[ 0.526209] io scheduler deadline registered
[ 0.526228] io scheduler row registered
[ 0.526396] io scheduler cfq registered (default)
[ 0.526404] io scheduler test-iosched registered
[ 0.526689] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc0 incorrect owner 2
[ 0.526778] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc1 incorrect owner 5
[ 0.526858] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc2 incorrect owner 4
[ 0.526938] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc3 incorrect owner 2
[ 0.527071] gpiochip_add: registered GPIOs 572 to 575 on device: pm8110-gpio
[ 0.527392] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa3 incorrect owner 2
[ 0.527514] gpiochip_add: registered GPIOs 570 to 571 on device: pm8110-mpp
[ 0.529563] mdss_dsi_panel_init: Panel Name = TIANMA OTM9605A QHD video mode dsi panel
[ 0.529791] mdss_dsi_panel_init:977 Continuous splash flag enabled.
[ 0.529802] mdss_dsi_panel_init:989 Partial update disabled.
[ 0.529859] dsi_parse_gpio:156, Disp_en gpio not specified
[ 0.530392] mdss_register_panel: adding framebuffer device fdd00000.qcom,mdss_dsi
[ 0.562475] mdss_fb_register: FrameBuffer[0] 540x960 size=0 registered successfully!
[ 0.604341] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
[ 0.604364] AXI: get_pdata(): Error: Client name not found
[ 0.604373] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[ 0.604380] msm_serial_hsl_probe: Bus scaling is disabled
[ 0.604512] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
[ 0.604574] msm_hsl_console_setup: console setup on port #0
[ 2.165103] msm_thermal: Limiting cpu0 max frequency to 787200
[ 2.165801] msm_thermal: Limiting cpu1 max frequency to 787200
[ 2.165957] msm_thermal: Limiting cpu2 max frequency to 787200
[ 2.166112] msm_thermal: Limiting cpu3 max frequency to 787200
[ 2.188570] cpr_irq_handler: IRQ_STATUS = 0x45
[ 2.188581] console [ttyHSL0] enabled
[ 2.189296] msm_serial_hsl_init: driver initialized
[ 2.195035] diagchar initialized now
[ 2.204909] cpr_scale: last_volt[corner:2] = 1050000 uV
[ 2.210249] cpr_scale: Down: cpr status = 0x00003639 (error_steps=14)
[ 2.216641] cpr_scale: [corn:2] @ floor: 1050000 <= 1050000: NACK
[ 2.224659] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
[ 2.246086] brd: module loaded
[ 2.253794] loop: module loaded
[ 2.256506] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
[ 2.260801] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
[ 2.266313] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x0
[ 2.271982] QSEECOM: qseecom_probe: secure app region addr=0xda00000 size=0x100000
[ 2.280279] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[ 2.286364] i2c-core: driver [tabla-i2c-core] using legacy resume method
[ 2.293309] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[ 2.299992] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[ 2.307581] sps: BAM device 0xf9904000 is not registered yet.
[ 2.312628] sps:BAM 0xf9904000 is registered.
[ 2.317138] sps:BAM 0xf9904000 (va:0xc8be0000) enabled: ver:0x15, number of pipes:24
[ 2.325223] spi_qsd f9926000.spi: master is unqueued, this is deprecated
[ 2.332961] tun: Universal TUN/TAP device driver, 1.6
[ 2.336973] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 2.343323] rmnet_init: BAM devices[9]
[ 2.359367] PPP generic driver version 2.4.2
[ 2.362877] PPP BSD Compression module registered
[ 2.367287] PPP Deflate Compression module registered
[ 2.373407] PPP MPPE Compression module registered
[ 2.377164] NET: Registered protocol family 24
[ 2.382044] wcnss_wlan probed in built-in mode
[ 2.389251] msm_otg f9a55000.usb: msm_otg probe
[ 2.393398] msm_otg f9a55000.usb: OTG regs = c8942000
[ 2.401808] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
[ 2.406729] msm_otg f9a55000.usb: phy_reset: success
[ 2.411726] msm_thermal: Limiting cpu0 max frequency to 384000
[ 2.418049] msm_thermal: Limiting cpu1 max frequency to 384000
[ 2.423651] msm_thermal: Limiting cpu2 max frequency to 384000
[ 2.429137] cpr_irq_handler: IRQ_STATUS = 0x05
[ 2.429417] msm_thermal: Limiting cpu3 max frequency to 384000
[ 2.439390] cpr_scale: last_volt[corner:1] = 1050000 uV
[ 2.444589] cpr_scale: Down: cpr status = 0x00006dbd (error_steps=15)
[ 2.451009] cpr_scale: [corn:1] @ floor: 1050000 <= 1050000: NACK
[ 2.458194] mbim_init: initialize 1 instances
[ 2.461872] mbim_init: Initialized 1 ports
[ 2.472147] rndis_qc_init: initialize rndis QC instance
[ 2.478556] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.484482] android_usb gadget: Number of LUNs=3
[ 2.489021] lun0: LUN: removable file: (no medium)
[ 2.493928] lun1: LUN: removable read only CD-ROM file: (no medium)
[ 2.500276] lun2: LUN: removable file: (no medium)
[ 2.506110] android_usb gadget: android_usb ready
[ 2.513830] [himax] himax_ts_init
[ 2.516230] wxun: himax_ts_probe: irq set here
[ 2.520804] [HIMAX PORTING MSG]himax_ts_probe ts->client->irq =330
[ 2.526804] wxun: himax_ts_probe: reset set here
[ 2.531538] ------------[ cut here ]------------
[ 2.536112] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[ 2.546759] autorequest GPIO-0
[ 2.549796] Modules linked in:
[ 2.552872] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[ 2.562320] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[ 2.571870] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[ 2.581509] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[ 2.591577] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c05355c8>] (himax_ts_probe+0x174/0xc64)
[ 2.601209] [<c05355c8>] (himax_ts_probe+0x174/0xc64) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[ 2.610322] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[ 2.619783] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[ 2.629162] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[ 2.638187] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[ 2.647212] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[ 2.656244] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[ 2.665618] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[ 2.675078] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[ 2.683934] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[ 2.692731] ---[ end trace c2a2a274ab2d5667 ]---
[ 3.021263] qup_i2c f9923000.i2c: QUP: I2C status flags :0x81343c8, irq:127
[ 3.027250] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[ 3.050482] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[ 3.056378] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[ 3.080439] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[ 3.086333] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[ 3.110276] [TP] i2c_himax_read: i2c_read_block retry over 3
[ 3.114909] himax_ts_probe other driver has been loaded
[ 3.120412] msg26xx: msg26xx_ts_init
[ 3.123763] msg26xx: TPD probe
[ 3.126714] ------------[ cut here ]------------
[ 3.131334] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[ 3.141991] autorequest GPIO-0
[ 3.145028] Modules linked in:
[ 3.148095] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[ 3.157552] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[ 3.167102] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[ 3.176740] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[ 3.186807] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c0538984>] (tpd_probe+0x3c/0x748)
[ 3.195919] [<c0538984>] (tpd_probe+0x3c/0x748) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[ 3.204512] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[ 3.213972] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[ 3.223351] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[ 3.232378] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[ 3.241402] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[ 3.250433] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[ 3.259809] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[ 3.269267] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[ 3.278124] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[ 3.286872] ---[ end trace c2a2a274ab2d5668 ]---
[ 3.630447] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[ 3.636343] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[ 3.642640] _msg_WriteI2CSeq error -107,addr = 38
[ 3.647235] msg26xx: _msg_GetVersion ret = -107
[ 3.680439] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[ 3.686333] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[ 3.692630] _msg_WriteI2CSeq error -107,addr = 38
[ 3.697227] msg26xx: _msg_GetVersion ret = -107
[ 3.730438] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[ 3.736331] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[ 3.742627] _msg_WriteI2CSeq error -107,addr = 38
[ 3.747225] msg26xx: _msg_GetVersion ret = -107
[ 3.780271] msg26xx: may be there is not msg26xx tp
[ 3.784244] msg26xx: probe of 1-0026 failed with error 19
[ 3.789857] FTS: ft5x0x_ts_probe enter
[ 3.793533] FTS: irq = 330
[ 4.221287] FTS: --------ft5x0x_read_version---------fwversion=b,module=5d
[ 4.228873] input: ft5x0x_ts as /devices/virtual/input/input0
[ 4.390714] ft5x0x_ts 1-0038: Create proc entry success!
[ 4.395518] FTS: Firmware version = 0xb
[ 4.399411] FTS: report rate is 100Hz.
[ 4.403294] FTS: touch threshold is 48.
[ 4.407274] input: proximity as /devices/f9923000.i2c/i2c-1/1-0038/input/input1
[ 4.414317] FTS: tp_prox_setup_polled_device, err=0, poll-interval=100
[ 4.420683] Successfully added driver ft5x0x_ts
[ 4.424948] ctp_selftest_init
[ 4.428130] create_proc_entry g_ctp_selftest_proc success
[ 4.433346] ctp_upgrade_init
[ 4.436415] [elan] create_proc_entry 222 success
[ 4.440832] create_proc_entry success
[ 4.444393] ctp_if_upgrade_init
[ 4.447737] ctp_if_upgrade_init create_proc_entry 222 success
[ 4.453332] create_proc_entry success
[ 4.456911] create_proc_entry success
[ 4.460740] bma2x2_probe:
[ 4.490895] bma2x2_probe: chipid=20f8
[ 4.494177] input: accelerometer as /devices/f9925000.i2c/i2c-0/0-0018/input/input2
[ 4.501562] bma2x2_disable,start
[ 4.506270] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1439, h:m:s == 0:23:59, d/m/y = 1/0/70
[ 4.513615] qcom,qpnp-rtc qpnp-rtc-de519800: Alarm set for - h:r:s=0:0:0, d/m/y=1/0/70
[ 4.521514] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1439, h:m:s == 0:23:59, d/m/y = 1/0/70
[ 4.530579] using rtc device, qpnp_rtc, for alarms
[ 4.534300] qcom,qpnp-rtc qpnp-rtc-de519800: rtc core: registered qpnp_rtc as rtc0
[ 4.542504] qcom,qpnp-rtc qpnp-rtc-de519800: Probe success !!
[ 4.547825] i2c /dev entries driver
[ 4.569882] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[ 4.576044] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[ 4.583624] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[ 4.590021] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[ 4.598603] s5k4e1_init_module:153
[ 4.602139] s5k4e1_init_module:158 rc -19
[ 4.607733] zgc2235_init_module:141
[ 4.611340] zgc2235_init_module:146 rc -19
[ 4.614509] msm_sensor_i2c_probe gc2235_i2c_probe called
[ 4.619702] msm_sensor_i2c_probe: of_node exisists
[ 4.624379] msm_sensor_get_dt_data qcom,sensor-name gc2235, rc 0
[ 4.630530] msm_sensor_get_dt_data qcom,sensor-mode 0, rc 0
[ 4.636030] msm_sensor_get_dt_data qcom,sensor-position 1, rc 0
[ 4.641982] msm_sensor_get_dt_data qcom,mount-angle 270, rc 0
[ 4.647663] msm_sensor_get_dt_data qcom,cci-master 0, rc 0
[ 4.653186] msm_sensor_get_sub_module_index:75 src_node NULL
[ 4.658772] msm_sensor_get_sub_module_index:92 eeprom src_node NULL
[ 4.665118] msm_sensor_get_sub_module_index qcom,led flash cell index 1, rc 0
[ 4.672208] msm_sensor_get_sub_module_index csiphy_core[0] = 1
[ 4.677960] msm_sensor_get_sub_module_index csid_core[0] = 1
[ 4.683660] msm_sensor_get_dt_csi_data qcom,csi-lane-assign e4, rc 0
[ 4.689936] msm_sensor_get_dt_csi_data qcom,csi-lane-mask 3, rc 0
[ 4.696065] msm_sensor_get_dt_vreg_data qcom,cam-vreg-name count 3
[ 4.702229] msm_sensor_get_dt_vreg_data reg_name[0] = cam_vdig
[ 4.707990] msm_sensor_get_dt_vreg_data reg_name[1] = cam_vio
[ 4.713773] msm_sensor_get_dt_vreg_data reg_name[2] = cam_vana
[ 4.719540] msm_sensor_get_dt_vreg_data cam_vreg[0].type = 0
[ 4.725228] msm_sensor_get_dt_vreg_data cam_vreg[1].type = 0
[ 4.730867] msm_sensor_get_dt_vreg_data cam_vreg[2].type = 0
[ 4.736464] msm_sensor_get_dt_vreg_data cam_vreg[0].min_voltage = 1800000
[ 4.743282] msm_sensor_get_dt_vreg_data cam_vreg[1].min_voltage = 1800000
[ 4.750000] msm_sensor_get_dt_vreg_data cam_vreg[2].min_voltage = 2850000
[ 4.756828] msm_sensor_get_dt_vreg_data cam_vreg[0].max_voltage = 1800000
[ 4.763595] msm_sensor_get_dt_vreg_data cam_vreg[1].max_voltage = 1800000
[ 4.770364] msm_sensor_get_dt_vreg_data cam_vreg[2].max_voltage = 2850000
[ 4.777089] msm_sensor_get_dt_vreg_data cam_vreg[0].op_mode = 200000
[ 4.783473] msm_sensor_get_dt_vreg_data cam_vreg[1].op_mode = 200000
[ 4.789757] msm_sensor_get_dt_vreg_data cam_vreg[2].op_mode = 80000
[ 4.796249] msm_sensor_get_dt_data gpio count 3
[ 4.800610] msm_sensor_get_dt_data gpio_array[0] = 13
[ 4.805583] msm_sensor_get_dt_data gpio_array[1] = 15
[ 4.810686] msm_sensor_get_dt_data gpio_array[2] = 85
[ 4.815642] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].gpio = 13
[ 4.822367] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].gpio = 15
[ 4.828994] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].gpio = 85
[ 4.835735] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].flags = 1
[ 4.842415] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].flags = 0
[ 4.849046] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].flags = 0
[ 4.855788] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].label = CAMIF_MCLK
[ 4.863253] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].label = CAM_RESET
[ 4.870632] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].label = CAM_STANDBY
[ 4.878144] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 15
[ 4.883742] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 85
[ 4.889267] msm_sensor_get_dt_actuator_data qcom,actuator-cam-name 0, rc -22
[ 4.896332] msm_sensor_get_dt_data qcom,misc_regulator (null), rc -22
[ 4.902749] msm_sensor_power_up:991
[ 4.906197] msm_sensor_power_up index 0
[ 4.909982] msm_sensor_power_up type 2
[ 4.925460] msm_sensor_power_up index 1
[ 4.928270] msm_sensor_power_up type 2
[ 4.943717] msm_sensor_power_up index 2
[ 4.946528] msm_sensor_power_up type 2
[ 4.961989] msm_sensor_power_up index 3
[ 4.964799] msm_sensor_power_up type 0
[ 4.974677] msm_sensor_power_up index 4
[ 4.977486] msm_sensor_power_up type 1
[ 5.030278] msm_sensor_power_up index 5
[ 5.033088] msm_sensor_power_up type 1
[ 5.080277] msm_sensor_power_up index 6
[ 5.083085] msm_sensor_power_up type 1
[ 5.130279] msm_sensor_power_up index 7
[ 5.133088] msm_sensor_power_up type 1
[ 5.180279] msm_sensor_power_up index 8
[ 5.183086] msm_sensor_power_up type 3
[ 5.187425] qup_i2c f9928000.i2c: QUP: I2C status flags :0x81343c8, irq:132
[ 5.193822] qup_i2c f9928000.i2c: I2C slave addr:0x21 not connected
[ 5.200045] msm_sensor_match_id: gc2235: read id failed
[ 5.205289] msm_sensor_power_up:1095 match id failed rc -107
[ 5.210917] msm_sensor_power_up:1102 failed
[ 5.215032] msm_sensor_power_up index 8
[ 5.218849] msm_sensor_power_up type 3
[ 5.222636] msm_sensor_power_up index 7
[ 5.226402] msm_sensor_power_up type 1
[ 5.270280] msm_sensor_power_up index 6
[ 5.273088] msm_sensor_power_up type 1
[ 5.320279] msm_sensor_power_up index 5
[ 5.323088] msm_sensor_power_up type 1
[ 5.370279] msm_sensor_power_up index 4
[ 5.373088] msm_sensor_power_up type 1
[ 5.420278] msm_sensor_power_up index 3
[ 5.423086] msm_sensor_power_up type 0
[ 5.432913] msm_sensor_power_up index 2
[ 5.435720] msm_sensor_power_up type 2
[ 5.450992] msm_sensor_power_up index 1
[ 5.453801] msm_sensor_power_up type 2
[ 5.469091] msm_sensor_power_up index 0
[ 5.471962] msm_sensor_power_up type 2
[ 5.487216] msm_sensor_i2c_probe gc2235 power up failed
[ 5.491512] gc2235: probe of 6-0078 failed with error -107
[ 5.506059] lirc_dev: IR Remote Control driver registered, major 241
[ 5.511548] IR NEC protocol handler initialized
[ 5.515993] IR RC5(x) protocol handler initialized
[ 5.520822] IR RC6 protocol handler initialized
[ 5.525281] IR JVC protocol handler initialized
[ 5.529795] IR Sony protocol handler initialized
[ 5.534451] IR RC5 (streamzap) protocol handler initialized
[ 5.539952] IR SANYO protocol handler initialized
[ 5.544755] msm_thermal: Limiting cpu0 max frequency to 787200
[ 5.550555] IR MCE Keyboard/mouse protocol handler initialized
[ 5.550932] msm_thermal: Limiting cpu1 max frequency to 787200
[ 5.551083] msm_thermal: Limiting cpu2 max frequency to 787200
[ 5.551235] msm_thermal: Limiting cpu3 max frequency to 787200
[ 5.573785] IR LIRC bridge handler initialized
[ 5.578978] BMS: qpnp_bms_init: QPNP BMS INIT
[ 5.582628] spmi qpnp-bms-de519600: Driver qcom,qpnp-bms requests probe deferral
[ 5.590061] spmi qpnp-charger-de518800: Driver qcom,qpnp-charger requests probe deferral
[ 5.636980] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 5.646266] cpuidle: using governor ladder
[ 5.650294] cpuidle: using governor menu
[ 5.653301] sdhci: Secure Digital Host Controller Interface driver
[ 5.659392] sdhci: Copyright(c) Pierre Ossman
[ 5.664401] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.669915] AXI: get_pdata(): Error: Client name not found
[ 5.674882] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[ 5.683976] mmc0: no vmmc regulator found
[ 5.689486] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
[ 5.695641] AXI: get_pdata(): Error: Client name not found
[ 5.700651] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[ 5.711945] mmc1: no vmmc regulator found
[ 5.717428] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
[ 5.725752] zram: Created 1 device(s) ...
[ 5.729607] ashmem: initialized
[ 5.732009] logger: created 256K log 'log_main'
[ 5.736486] logger: created 256K log 'log_events'
[ 5.741240] logger: created 256K log 'log_radio'
[ 5.745774] logger: created 256K log 'log_system'
[ 5.751200] sps:BAM 0xf9a44000 is registered.
[ 5.754521] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
[ 5.762208] PMIC@SID0 Power-on reason: Triggered from SMPL (sudden momentary power loss) and 'cold' boot
[ 5.771549] input: qpnp_pon as /devices/virtual/input/input3
[ 5.777830] PMIC@SID0: PM8110 v2.0 options: 0, 0, 0, 0
[ 5.782379] coresight-fuse fc4be024.fuse: Fuse initialized
[ 5.788095] coresight-cti fc310000.cti: CTI initialized
[ 5.792864] coresight-cti fc311000.cti: CTI initialized
[ 5.798038] coresight-cti fc312000.cti: CTI initialized
[ 5.803281] coresight-cti fc313000.cti: CTI initialized
[ 5.808439] coresight-cti fc314000.cti: CTI initialized
[ 5.811739] mmc0: BKOPS_EN bit = 0
[ 5.817077] coresight-cti fc315000.cti: CTI initialized
[ 5.822313] coresight-cti fc316000.cti: CTI initialized
[ 5.823083] mmc0: new HS200 MMC card at address 0001
[ 5.832307] mmcblk0: mmc0:0001 H4G1d 3.64 GiB
[ 5.832554] coresight-cti fc317000.cti: CTI initialized
[ 5.832772] coresight-cti fc318000.cti: CTI initialized
[ 5.833007] coresight-cti fc351000.cti: CTI initialized
[ 5.833226] coresight-cti fc352000.cti: CTI initialized
[ 5.833457] coresight-cti fc353000.cti: CTI initialized
[ 5.833689] coresight-cti fc354000.cti: CTI initialized
[ 5.833909] coresight-cti fc335000.cti: CTI initialized
[ 5.834142] coresight-cti fc338000.cti: CTI initialized
[ 5.834362] coresight-cti fc33c000.cti: CTI initialized
[ 5.834595] coresight-cti fc360000.cti: CTI initialized
[ 5.835372] coresight-csr fc301000.csr: CSR initialized
[ 5.895148] mmcblk0rpmb: mmc0:0001 H4G1d partition 3 4.00 MiB
[ 5.898248] coresight-tmc fc326000.tmc: Byte Counter feature enabled
[ 5.898311] sps:BAM 0xfc37c000 is registered.
[ 5.898687] coresight-tmc fc326000.tmc: TMC initialized
[ 5.899287] coresight-tmc fc325000.tmc: TMC initialized
[ 5.900468] coresight-tpiu fc320000.tpiu: seta gpios not specified
[ 5.900482] coresight-tpiu fc320000.tpiu: setb gpios not specified
[ 5.900630] coresight-tpiu fc320000.tpiu: TPIU initialized
[ 5.901356] coresight-funnel fc323000.funnel: FUNNEL initialized
[ 5.901595] coresight-funnel fc321000.funnel: FUNNEL initialized
[ 5.901817] coresight-funnel fc322000.funnel: FUNNEL initialized
[ 5.902021] coresight-funnel fc355000.funnel: FUNNEL initialized
[ 5.902726] coresight-replicator fc324000.replicator: REPLICATOR initialized
[ 5.903623] coresight-stm fc302000.stm: STM initialized
[ 5.904359] coresight-hwevent fd820018.hwevent: Hardware Event driver initialized
[ 5.983055] coresight-etm fc34c000.etm: ETM initialized
[ 5.986253] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22
[ 5.997337] coresight-etm fc34d000.etm: ETM initialized
[ 6.002534] coresight-etm fc34e000.etm: ETM initialized
[ 6.007705] coresight-etm fc34f000.etm: ETM initialized
[ 6.013226] coresight-audio-etm audio_etm0.1: Audio ETM initialized
[ 6.019405] coresight-modem-etm modem_etm0.2: Modem ETM initialized
[ 6.025714] coresight-wcn-etm wcn_etm0.3: Wireless ETM initialized
[ 6.031839] coresight-rpm-etm rpm_etm0.4: RPM ETM initialized
[ 6.038450] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 6.045292] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.063643] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
[ 6.070871] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
[ 6.077874] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[ 6.085386] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[ 6.097115] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 6.103839] Netfilter messages via NETLINK v0.30.
[ 6.108103] nf_conntrack version 0.5.0 (6339 buckets, 25356 max)
[ 6.115060] ctnetlink v0.93: registering with nfnetlink.
[ 6.119833] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 6.126312] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 6.132673] xt_time: kernel timezone is -0000
[ 6.137131] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.142220] arp_tables: (C) 2002 David S. Miller
[ 6.146458] TCP: cubic registered
[ 6.150899] NET: Registered protocol family 10
[ 6.158948] Mobile IPv6
[ 6.160454] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 6.166109] IPv6 over IPv4 tunneling driver
[ 6.170831] NET: Registered protocol family 17
[ 6.174463] Bridge firewalling registered
[ 6.178343] Ebtables v2.0 registered
[ 6.182274] Bluetooth: RFCOMM TTY layer initialized
[ 6.186768] Bluetooth: RFCOMM socket layer initialized
[ 6.191897] Bluetooth: RFCOMM ver 1.11
[ 6.195602] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.200922] Bluetooth: BNEP filters: protocol multicast
[ 6.206109] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 6.212635] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[ 6.219675] Registering SWP/SWPB emulation handler
[ 6.232738] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 6.233878] input: gpio-keys as /devices/gpio_keys.60/input/input4
[ 6.234505] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1440, h:m:s == 0:24:0, d/m/y = 1/0/70
[ 6.253328] qcom,qpnp-rtc qpnp-rtc-de519800: setting system clock to 1970-01-01 00:24:00 UTC (1440)
[ 6.253756] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[ 6.253769] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[ 6.253795] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[ 6.254103] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[ 6.254114] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[ 6.254138] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[ 6.254255] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 6.254277] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.259528] batfet:
[ 6.271314] msm_otg f9a55000.usb: USB in low power mode
[ 6.271479] qcom,qpnp-charger:qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 0, dc = 0 b_health = 0 batt_present = 7
[ 6.305249] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1440, h:m:s == 0:24:0, d/m/y = 1/0/70
[ 6.351374] clock_late_init: Removing enables held for handed-off clocks
[ 6.354356] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1440, h:m:s == 0:24:0, d/m/y = 1/0/70
[ 6.369662] ALSA device list:
[ 6.371637] No soundcards foun 6.375896] Freeing init memory: 72K
[ 6.381672] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1440, h:m:s == 0:24:0, d/m/y = 1/0/70
[ 6.388966] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1440, h:m:s == 0:24:0, d/m/y = 1/0/70
[ 6.397316] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1440, h:m:s == 0:24:0, d/m/y = 1/0/70
[ 6.428889] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1440, h:m:s == 0:24:0, d/m/y = 1/0/70
[ 6.436224] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1440, h:m:s == 0:24:0, d/m/y = 1/0/70
[ 6.438422] type=1403 audit(1440.689:2): policy loaded auid=4294967295 ses=4294967295
[ 6.439163] SELinux: Loaded policy from (null)
[ 6.449242] init: /init.qcom.rc: 259: ignored duplicate definition of service 'usbhub_init'
[ 6.450498] init: /init.qcom.rc: 672: invalid command '/system/bin/log'
[ 6.454389] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[ 6.462066] init: invalid uid 'fm_radio'
[ 6.484102] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1441, h:m:s == 0:24:1, d/m/y = 1/0/70
[ 6.492161] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1441, h:m:s == 0:24:1, d/m/y = 1/0/70
[ 6.548349] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1441, h:m:s == 0:24:1, d/m/y = 1/0/70
[ 6.555661] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1441, h:m:s == 0:24:1, d/m/y = 1/0/70
[ 6.577889] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1441, h:m:s == 0:24:1, d/m/y = 1/0/70
[ 6.590298] msm_thermal: Max frequency reset for cpu0
[ 6.596301] msm_thermal: Max frequency reset for cpu1
[ 6.600499] msm_thermal: Max frequency reset for cpu2
[ 6.605551] msm_thermal: Max frequency reset for cpu3
[ 6.616455] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1441, h:m:s == 0:24:1, d/m/y = 1/0/70
[ 6.623696] BMS: qpnp_bms_probe: probe success: soc =100 vbatt = 3957126 ocv = 4066221 r_sense_uohm = 9406 warm_reset = 0
[ 6.635023] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 6.642432] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.650959] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 6.657257] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 6.665170] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.669583] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1441, h:m:s == 0:24:1, d/m/y = 1/0/70
[ 7.150509] init: cannot open '/initlogo.rle'
[ 7.256765] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1
[ 7.344016] EXT4-fs (mmcblk0p22): recovery complete
[ 7.348824] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 7.421029] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
[ 7.468219] e2fsck used greatest stack depth: 5328 bytes left
[ 7.473023] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[ 7.477546] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 1008/131072 files, 49691/524288 blocks
[ 7.494937] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
[ 7.504087] init used greatest stack depth: 5296 bytes left
[ 7.516441] EXT4-fs (mmcblk0p14): recovery complete
[ 7.521208] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1
[ 7.529341] EXT4-fs (mmcblk0p21): <<<<<wzg Opt_gid
[ 7.538854] EXT4-fs (mmcblk0p21): recovery complete
[ 7.543622] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: gid=1015
[ 7.551098] SELinux: Context u:object_r:blinkfeed_file:s0 is not valid (left unmapped).
[ 7.564767] EXT4-fs (mmcblk0p13): recovery complete
[ 7.569498] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: barrier=1
[ 7.630456] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
[ 7.640421] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
[ 7.658382] pil-q6v5-lpass fe200000.qcom,lpass: adsp: loading from 0x0c500000 to 0x0d200000
[ 7.866483] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset
[ 7.918872] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Power/Clock ready interrupt received
[ 7.932434] pil-q6v5-lpass fe200000.qcom,lpass: Subsystem error monitoring/handling services are up
[ 7.941426] apr_tal:Q6 Is Up
[ 7.943868] diag: In diag_send_msg_mask_update, invalid status 0
[ 7.944175] adsp-loader qcom,msm-adsp-loader.29: adsp_loader_do: Q6/ADSP image is loaded
[ 7.944283] msm8x10-wcd-i2c-core 5-000d: adsp is ready
[ 7.944790] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdda-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
[ 7.944797]
[ 7.944864] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-px: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
[ 7.944870]
[ 7.944902] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-1p2v: vol=[1200000 1200000]uV, curr=[5000]uA, ond 0
[ 7.944908]
[ 7.944931] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdda-cp: vol=[1800000 2150000]uV, curr=[650000]uA, ond 1
[ 7.944937]
[ 7.944979] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-mic-bias: vol=[3075000 3075000]uV, curr=[25000]uA, ond 1
[ 7.944986]
[ 7.949675] wcd9xxx_core_res_init: num_irqs = 24, num_irq_regs = 3
[ 7.956052] msm8x10-wcd-i2c-core msm8x10_wcd_codec: msm8x10_wcd_i2c_probe: irq initialization passed
[ 7.958889] wcd9xxx_resmgr_init
[ 7.979057] wcd9xxx_mbhc_init: enter
[ 7.984847] wcd9xxx_mbhc_init: leave ret 0
[ 8.025599] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[ 8.025618] wcd9xxx_event_notify: leave
[ 8.026725] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[ 8.026737] wcd9xxx_event_notify: leave
[ 8.027842] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[ 8.027852] wcd9xxx_event_notify: leave
[ 8.028959] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[ 8.028971] wcd9xxx_event_notify: leave
[ 8.033129] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
[ 8.034122] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
[ 8.034956] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
[ 8.035733] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
[ 8.036557] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
[ 8.037314] asoc: snd-soc-dummy-dai <-> SEC_MI2S_RX_HOSTLESS mapping ok
[ 8.038093] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
[ 8.038748] asoc: msm-stub-rx <-> msm-dai-q6-dev.241 mapping ok
[ 8.039413] asoc: msm-stub-tx <-> msm-dai-q6-dev.240 mapping ok
[ 8.040337] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
[ 8.041060] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
[ 8.041659] asoc: snd-soc-dummy-dai <-> PRI_MI2S_TX_HOSTLESS mapping ok
[ 8.042382] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
[ 8.043268] asoc: snd-soc-dummy-dai <-> Voice2 mapping ok
[ 8.044038] asoc: snd-soc-dummy-dai <-> QCHAT mapping ok
[ 8.044977] msm8x10-wcd-i2c-core msm8x10_wcd_codec: dapm: unknown pin Lineout amp
[ 8.045419] asoc: msm8x10_wcd_i2s_rx1 <-> msm-dai-q6-mi2s.1 mapping ok
[ 8.046478] asoc: msm8x10_wcd_i2s_tx1 <-> msm-dai-q6-mi2s.0 mapping ok
[ 8.047111] asoc: msm-stub-rx <-> msm-dai-q6-dev.12288 mapping ok
[ 8.047723] asoc: msm-stub-tx <-> msm-dai-q6-dev.12289 mapping ok
[ 8.048382] asoc: msm-stub-rx <-> msm-dai-q6-dev.12292 mapping ok
[ 8.048998] asoc: msm-stub-tx <-> msm-dai-q6-dev.12293 mapping ok
[ 8.049580] asoc: msm-stub-rx <-> msm-dai-q6-dev.224 mapping ok
[ 8.050120] asoc: msm-stub-tx <-> msm-dai-q6-dev.225 mapping ok
[ 8.050800] asoc: msm-stub-tx <-> msm-dai-q6-dev.32772 mapping ok
[ 8.051451] asoc: msm-stub-tx <-> msm-dai-q6-dev.32771 mapping ok
[ 8.052053] asoc: msm-stub-rx <-> msm-dai-q6-dev.32773 mapping ok
[ 8.063826] input: Button Jack as /devices/sound.37/sound/card0/input5
[ 8.064329] input: Headset Jack as /devices/sound.37/sound/card0/input6
[ 8.267963] diag: In diag_send_log_mask_update, invalid status 0
[ 8.409291] wcnss_wlan triggered by userspace
[ 8.440764] wcnss_trigger_config: adc get failed
[ 8.449495] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[ 8.458237] init: cannot find '/system/bin/nac_server', disabling 'nac_server'
[ 8.471025] init: cannot find '/system/bin/qrngd', disabling 'qrngd'
[ 8.481032] pil_pronto fb21b000.qcom,pronto: wcnss: loading from 0x0d200000 to 0x0d6ee000
[ 8.506084] getprop used greatest stack depth: 5180 bytes left
[ 8.584793] init: cannot find '/system/bin/wiperiface', disabling 'wiperiface'
[ 8.614905] init: cannot find '/system/bin/ssr_diag', disabling 'ssr_diag'
shell@msm8610:/ $ [ 8.761549] cp used greatest stack depth: 5068 bytes left
[ 9.413529] diag: In diag_send_msg_mask_update, invalid status 0
[ 9.423116] diag: In diag_send_log_mask_update, invalid status 0
[ 9.431057] init: untracked pid 272 exited
[ 9.438376] enable_store: android_usb: already disabled
[ 9.460054] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 9.463871] msm_isp_close_node: halt timeout rc=0
[ 9.475822] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 9.476436] msm_tsens_get_temp: tsens mapping index not found
[ 9.476487] msm_tsens_get_temp: tsens mapping index not found
[ 9.476512] msm_tsens_get_temp: tsens mapping index not found
[ 9.486004] Error: Driver 'DS' is already registered, aborting...
[ 9.507558] msm_tsens_get_temp: tsens mapping index not found
[ 9.513298] msm_tsens_get_temp: tsens mapping index not found
[ 9.518925] msm_tsens_get_temp: tsens mapping index not found
[ 9.593021] wcnss: no space available for smd frame
[ 9.612404] msm_audio_ion_import: DMA Buf name=audio_acdb_client, fd=18 handle=dce355c0
[ 9.620923] wcnss: no space available for smd frame
[ 9.650465] wcnss: no space available for smd frame
[ 9.680410] wcnss: no space available for smd frame
[ 9.709641] init: untracked pid 382 exited
[ 9.715619] wcnss: not setting up vbatt
[ 9.830365] ------------[ cut here ]------------
[ 9.830422] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[ 9.830429] Unbalanced enable for IRQ 330
[ 9.830695] ---[ end trace c2a2a274ab2d566a ]---
[ 10.110428] ------------[ cut here ]------------
[ 10.110469] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[ 10.110477] Unbalanced enable for IRQ 330
[ 10.110717] ---[ end trace c2a2a274ab2d566b ]---
[ 10.862901] Notify: smsm init
[ 10.902170] msm_ipc_router_send_control_msg: xprt_info not initialized
[ 11.146826] diag: In diag_send_msg_mask_update, invalid status 0
[ 11.151827] diag: In diag_send_log_mask_update, invalid status 0
[ 15.448025] ------------[ cut here ]------------
[ 15.451636] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[ 15.463269] ---[ end trace c2a2a274ab2d566c ]---
[ 15.565305] dsi_panel_handler enable=0
[ 15.738224] ------------[ cut here ]------------
[ 15.741854] WARNING: at /home/xxx/work/e5255_htc/kernel/arch/arm/mach-msm/clock.c:426 clk_unprepare+0xc4/0xd4()
[ 15.752322] ---[ end trace c2a2a274ab2d566d ]---
[ 15.756662] ------------[ cut here ]------------
[ 15.761303] WARNING: at /home/xxx/work/e5255_htc/kernel/arch/arm/mach-msm/clock.c:426 clk_unprepare+0xc4/0xd4()
[ 15.771768] ---[ end trace c2a2a274ab2d566e ]---
[ 15.776107] ------------[ cut here ]------------
[ 15.780736] WARNING: at /home/xxx/work/e5255_htc/kernel/arch/arm/mach-msm/clock.c:426 clk_unprepare+0xc4/0xd4()
[ 15.791210] ---[ end trace c2a2a274ab2d566f ]---
[ 15.795556] ------------[ cut here ]------------
[ 15.800152] WARNING: at /home/xxx/work/e5255_htc/kernel/arch/arm/mach-msm/clock.c:426 clk_unprepare+0xc4/0xd4()
[ 15.810662] ---[ end trace c2a2a274ab2d5670 ]---
[ 15.814993] ------------[ cut here ]------------
[ 15.819604] WARNING: at /home/xxx/work/e5255_htc/kernel/arch/arm/mach-msm/clock.c:426 clk_unprepare+0xc4/0xd4()
[ 15.830100] ---[ end trace c2a2a274ab2d5671 ]---
[ 15.860461] ------------[ cut here ]------------
[ 15.864063] WARNING: at /home/xxx/work/e5255_htc/kernel/arch/arm/mach-msm/clock.c:426 clk_unprepare+0xc4/0xd4()
[ 15.874580] ---[ end trace c2a2a274ab2d5672 ]---
[ 15.878911] ------------[ cut here ]------------
[ 15.883544] WARNING: at /home/xxx/work/e5255_htc/kernel/arch/arm/mach-msm/clock.c:426 clk_unprepare+0xc4/0xd4()
[ 15.894046] ---[ end trace c2a2a274ab2d5673 ]---
[ 15.898346] ------------[ cut here ]------------
[ 15.902970] WARNING: at /home/xxx/work/e5255_htc/kernel/arch/arm/mach-msm/clock.c:426 clk_unprepare+0xc4/0xd4()
[ 15.913476] ---[ end trace c2a2a274ab2d5674 ]---
[ 15.958496] dsi_panel_handler enable=1
[ 22.925928] pgd = dcdd8000
[ 22.927599] [00000001] *pgd=00000000
[ 22.982606] pgd = dcdd8000
[ 22.984339] [00000001] *pgd=00000000
[ 23.163051] pgd = dcdd8000
[ 23.164723] [00000001] *pgd=00000000
[ 25.291895] ndroid.exchange used greatest stack depth: 4884 bytes left
[ 87.420311] dsi_panel_handler enable=0
[ 89.101672] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 89.108568] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 89.114945] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 89.122911] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 89.130639] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 89.138336] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 89.157341] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 89.164678] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 90.305877] dpm_run_callback(): platform_pm_suspend+0x0/0x54 returns -16
[ 90.305920] PM: Device alarm failed to suspend: error -16
[ 90.305953] PM: Some devices failed to suspend
[ 90.457770] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 90.464711] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 90.472673] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 90.480396] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 90.488097] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 90.501834] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 90.507176] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 90.515712] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 91.881641] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 91.888554] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 91.894968] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 91.902940] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 91.910697] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 91.918329] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 91.918551] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 91.918633] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 92.276465] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 92.284014] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 92.290680] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 92.297578] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 92.303990] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 92.311963] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 92.319621] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 92.330429] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 92.534433] Freezing of user space aborted
[ 92.538247] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 92.538716] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 92.538756] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 92.538765] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 92.538840] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 92.540613] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 92.540624] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 92.587973] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 92.900168] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 92.900185] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 92.900200] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 92.900735] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 92.900749] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 92.901159] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 92.901173] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 92.949614] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 94.310814] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 94.317703] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 94.324076] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 94.332053] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 94.339752] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 94.346113] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 94.369843] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 94.377411] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 94.807607] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 94.814553] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 94.822510] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 94.830210] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 94.836573] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 94.853346] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 94.858691] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 94.867227] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 95.285239] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 95.292182] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 95.300136] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 95.307864] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 95.331645] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 95.339139] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 95.344620] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 95.351092] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 95.782936] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 95.789863] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 95.796301] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 95.804297] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 95.811984] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 95.819632] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 95.842703] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 95.848048] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 97.251682] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 97.258574] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 97.264960] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 97.272923] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 97.280646] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 97.288348] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 97.308962] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 97.316726] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 98.454343] PM: Some devices failed to suspend
[ 98.595215] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 98.602158] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 98.610092] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 98.616456] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 98.624194] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 98.646296] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 98.660279] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 98.665710] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 99.118458] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 99.125403] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 99.133361] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 99.141103] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 99.148788] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 99.164297] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 99.170121] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 99.178320] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 99.601806] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 99.608696] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 99.615082] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 99.623048] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 99.630775] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 99.638467] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 99.655207] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 99.661374] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 100.481786] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 100.488678] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 100.495053] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 100.503027] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 100.510764] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 100.518447] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 100.538284] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 100.544451] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 101.941024] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 101.947917] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 101.954291] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 101.962268] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 101.969966] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 101.976330] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 101.993272] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 101.998615] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 102.438660] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 102.445617] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 102.453577] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 102.461290] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 102.468989] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 102.487097] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 102.494564] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 102.502301] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 103.881555] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 103.888442] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 103.894820] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 103.902854] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 103.910489] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 103.916851] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 103.933561] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 103.941117] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 104.377751] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 104.384701] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 104.392660] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 104.400354] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 104.406767] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 104.422638] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 104.428698] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 104.436811] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 105.861680] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 105.868575] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 105.874953] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 105.882924] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 105.890622] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 105.896985] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 105.913446] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 105.918790] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 106.475794] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 106.482764] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 106.490682] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 106.497053] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 106.504778] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 106.526055] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 106.532030] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 106.539900] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 107.918914] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 107.925854] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 107.933810] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 107.941551] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 107.949236] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 107.964303] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 107.970302] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 107.978156] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 108.405098] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 108.412046] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 108.419972] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 108.426341] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 108.434061] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 108.454818] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 108.461038] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 108.469440] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 109.842139] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 109.849030] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 109.855420] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 109.863384] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 109.871110] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 109.878802] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 109.900881] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 109.910885] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 110.292043] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 110.298934] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 110.305328] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 110.313298] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 110.321006] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 110.328708] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 110.347499] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 110.353564] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 111.731773] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 111.738666] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 111.745040] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 111.753013] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 111.760714] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 111.767076] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 111.784626] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 111.789971] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 112.209096] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 112.216053] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 112.223996] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 112.231736] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 112.239421] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 112.252039] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 112.258116] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 112.266086] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 112.694915] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 112.701867] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 112.709792] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 112.716153] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 112.723892] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 112.744192] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 112.751004] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 112.758515] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 114.147273] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 114.154226] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 114.162175] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 114.169877] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 114.176239] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 114.210314] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 114.215775] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 114.222071] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 114.645331] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 114.652275] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 114.660210] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 114.666591] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 114.674297] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 114.690778] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 114.696163] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 114.704637] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 115.158033] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 115.164986] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 115.172943] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 115.180640] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 115.187005] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 115.204460] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 115.209803] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 115.218344] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 115.632009] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 115.638890] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 115.645261] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 115.653235] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 115.660937] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 115.667296] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 115.693313] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 115.698654] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 116.122311] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 116.129205] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 116.135592] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 116.143553] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 116.151277] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 116.158976] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 116.179971] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 116.185581] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 117.325449] PM: Some devices failed to suspend
[ 117.466008] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 117.472950] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 117.480881] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 117.487242] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 117.494983] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 117.511179] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 117.516527] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 117.525039] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 117.948842] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 117.955796] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 117.963740] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 117.971478] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 117.979168] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 117.994338] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 118.003401] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 118.008745] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 118.384399] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 118.385820] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 118.385835] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 118.385899] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 118.385911] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 118.385957] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 118.385968] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 118.433913] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 119.784029] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 119.790910] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 119.797310] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 119.805256] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 119.812980] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 119.820683] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 119.835469] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 119.840802] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 119.926000] Freezing of user space aborted
[ 119.935198] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 119.942122] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 119.950064] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 119.956438] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 119.964156] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 119.978649] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 119.984808] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 119.992475] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 120.066954] Freezing of user space aborted
[ 120.072188] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 120.079072] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 120.085445] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 120.093427] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 120.101119] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 120.107481] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 120.125191] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 120.130528] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 120.577851] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 120.584801] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 120.592747] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 120.600452] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 120.606826] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 120.626673] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 120.632500] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 120.642193] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 122.013689] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 122.020575] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 122.026956] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 122.034922] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 122.042661] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 122.050347] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 122.064022] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 122.069386] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 122.502114] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 122.509007] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 122.515378] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 122.523352] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 122.531051] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 122.537414] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 122.559164] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 122.564956] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 123.952243] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 123.959126] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 123.965496] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 123.973470] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 123.981172] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 123.987547] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 124.006131] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 124.013636] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 124.431565] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 124.438458] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 124.444824] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 124.452803] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 124.460504] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 124.466866] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 124.487964] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 124.493602] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
Android Bootloader - UART_DM Initialized!!!
[0] welcome to lk
[10] platform_init()
[10] target_init()
[30] Done initialization of the card
[130] Config MIPI_VIDEO_PANEL.
[130] mdss_dsi_panel_initialize: wxun: mipi_dsi.c--lane_swap=1
[140] mipi_panel_auto_detect:start
[150] otm9605A_read_reg_single: wxun, mipi_tianma_otm9605a_video_qhd.c reg=0xd202
[150] mipi_panel_auto_detect_otm9605A: lcdid=0x9605.
[160] mipi_tianma_otm9605A_panel_video_qhd_reinit: start
[160] mdss_dsi_config_reinit: lctlc: mipi_dsi.c
[330] Turn on MIPI_VIDEO_PANEL.
[340] Video lane tested successfully
[570] Backlight enable=1 failed
[570] pm8x41_get_is_cold_boot: cold boot
[570] target_pause_for_battery_charge : pon_reason is 128 cold_boot:1
[580] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
[590] Loading boot image (6486016): start
[660] Loading boot image (6486016): done
[670] ERROR: Unable to find suitable device tree for device (165/0x00010001/11/0)
[680] Using DTB entry 165/00010001/11/0 for device 165/00010001/11/0
[690] pm8x41_get_is_cold_boot: cold boot
[690] target_pause_for_battery_charge : pon_reason is 128 cold_boot:1
[690] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_vid[720] Updating device tree: start
[830] Updating device tree: done
[840] booting linux @ 0x8000, ramdisk @ 0x2000000 (459525), tags/device tree @ 0x1e00000
[840] Turn off MIPI_VIDEO_PANEL.
[840] Continuous splash enabled, keeping panel alive.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-g8218128-00704-g42fcf2d-dirty (xxx@soft111) (gcc version 4.7 (GCC) ) #5 SMP PREEMPT Mon Dec 30 21:01:18 CST 2013
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Qualcomm MSM 8610 (Flattened Device Tree), model: Qualcomm MSM 8610v2 QRD SKUAA
[ 0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-3a00000
[ 0.000000] Node qcom,msm-mem-hole removed memory 8800000-de00000
[ 0.000000] qcom,msm-rtb reserved EBI1 size 100000
[ 0.000000] memory pool 3 (start 0x1ff00000 size 100000) initialized
[ 0.000000] cma: CMA: reserved 16 MiB at 1ec00000
[ 0.000000] cma: Found qsecom_region, memory base 0, size 1 MiB
[ 0.000000] cma: CMA: reserved 4 MiB at 1e800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] IMEM DT static mapping successful
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c15c7000 s15872 r8192 d12800 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 107648
[ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_video lcm.id=0x9605
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 136MB 289MB = 425MB total
[ 0.000000] Memory: 384796k/384796k available, 51428k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xcde00000 - 0xe0000000 ( 290 MB)
[ 0.000000] vmalloc : 0xc8800000 - 0xcde00000 ( 86 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8800000 ( 136 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0c4f41c (12574 kB)
[ 0.000000] .init : 0xc0d00000 - 0xc0e12e00 (1100 kB)
[ 0.000000] .data : 0xc0e14000 - 0xc0ef8e08 ( 916 kB)
[ 0.000000] .bss : 0xc0ef8e2c - 0xc1113440 (2154 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] Console: colour dummy device 80x30
[ 0.000179] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000204] pid_max: default: 32768 minimum: 301
[ 0.000488] Security Framework initialized
[ 0.000540] SELinux: Initializing.
[ 0.000695] Mount-cache hash table entries: 512
[ 0.001989] Initializing cgroup subsys debug
[ 0.002005] Initializing cgroup subsys cpuacct
[ 0.002016] Initializing cgroup subsys freezer
[ 0.002070] CPU: Testing write buffer coherency: ok
[ 0.002560] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002650] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[ 0.005156] Setting up static identity map for 0x8a42f0 - 0x8a4354
[ 0.005194] Configuring XPU violations to be fatal errors
[ 0.005207] MSM Memory Dump table set up
[ 0.012584] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.018930] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.025258] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.025364] Brought up 4 CPUs
[ 0.025383] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.039675] dummy:
[ 0.056231] NET: Registered protocol family 16
[ 0.068711] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.070810] KPI: Bootloader start count = 56114
[ 0.070824] KPI: Bootloader end count = 84174
[ 0.070834] KPI: Bootloader display count = 66944
[ 0.070844] KPI: Bootloader load kernel count = 2448
[ 0.070856] KPI: Kernel MPM timestamp = 112094
[ 0.070866] KPI: Kernel MPM Clock frequency = 32768
[ 0.070889] socinfo_print: v8, id=165, ver=1.1, raw_id=2069, raw_ver=1, hw_plat=11, hw_plat_ver=196608
[ 0.070897] accessory_chip=0, hw_plat_subtype=0, pmic_model=65541, pmic_die_revision=131072
[ 0.085712] gpiochip_add: registered GPIOs 0 to 101 on device: msmgpio
[ 0.090550] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
[ 0.121059] 8110_s1: 500 <--> 1275 mV at 0 mV normal idle
[ 0.121745] 8110_s1_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.122418] 8110_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
[ 0.123090] 8110_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.123805] 8110_s3: 1200 <--> 1350 mV at 1200 mV normal idle
[ 0.124505] 8110_s4: 1800 <--> 2150 mV at 2150 mV normal idle
[ 0.125212] 8110_l1: 1225 mV normal idle
[ 0.125931] 8110_l2: 1200 mV normal idle
[ 0.126613] 8110_l3: 750 <--> 1275 mV at 0 mV normal idle
[ 0.127224] 8110_l3_ao: 750 <--> 1275 mV at 0 mV normal idle
[ 0.127860] 8110_l3_so: 750 <--> 1275 mV at 750 mV normal idle
[ 0.128843] 8110_l4: 1200 mV normal idle
[ 0.129501] 8110_l5: 1300 <--> 1350 mV at 1300 mV normal idle
[ 0.130185] 8110_l6: 1800 mV normal idle
[ 0.130881] 8110_l7: 2050 mV normal idle
[ 0.131589] 8110_l8: 1800 mV normal idle
[ 0.132270] 8110_l9: 2050 mV normal idle
[ 0.132984] 8110_l10: 1800 mV normal idle
[ 0.133639] 8110_l10_ao: 1800 mV normal idle
[ 0.134291] 8110_l10_so: 1800 mV normal idle
[ 0.134937] 8110_l12: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.135963] 8110_l14: 1800 mV normal idle
[ 0.136672] 8110_l15: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.137338] 8110_l16: 3000 <--> 3350 mV at 3000 mV normal idle
[ 0.138023] 8110_l17: 2900 mV normal idle
[ 0.138733] 8110_l18: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.139405] 8110_l19: 2850 mV normal idle
[ 0.140105] 8110_l20: 3075 mV normal idle
[ 0.140796] 8110_l21: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.141471] 8110_l22: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.143103] msm-thermal qcom,msm-thermal.51: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. KTM continues
[ 0.143477] vdd_restriction_reg_init:Defer vdd rstr freq init
[ 0.169242] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.169261] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.169954] msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized
[ 0.171987] 8110_s2: 900 <--> 1275 mV at 1150 mV
[ 0.172244] spm_regulator_probe: name=8110_s2, range=LV, voltage=1150000 uV, mode=AUTO, step rate=9600 uV/us
[ 0.173682] cpr_efuse_init: efuse_addr = 0xfc4b8000 (len=0x1000)
[ 0.173723] cpr_voltage_plan_init: [1] [1150000 1150000 1275000] uV
[ 0.173738] cpr_voltage_plan_init: [2] [1075000 1075000 1275000] uV
[ 0.173752] cpr_voltage_plan_init: [3] [1050000 1050000 1275000] uV
[ 0.173815] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[ 0.173860] cpr_pvs_init: [row:23] = 0xA0128513000002E0, n_bits=5, bin=11 (3)
[ 0.173875] cpr_pvs_init: pvs initial turbo voltage_= from 1275000 to 1275000
[ 0.174240] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[ 0.174291] cpr_init_cpr_efuse: [row:61] = 0x1250f115d9da8
[ 0.174312] cpr_init_cpr_efuse: disable = 0, local = 1
[ 0.174325] cpr_init_cpr_efuse: Corner[1]: ro_sel = 2, target quot = 482
[ 0.174338] cpr_init_cpr_efuse: Corner[2]: ro_sel = 2, target quot = 699
[ 0.174352] cpr_init_cpr_efuse: Corner[3]: ro_sel = 2, target quot = 949
[ 0.174407] cpr_init_cpr_parameters: CPR is enabled by default.
[ 0.174429] cpr_config: Timer count: 0x17700 (for 5000 us)
[ 0.174758] apc_corner: 0 <--> 0 mV
[ 0.177399] qup_i2c f9923000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.178661] kworker/u:1 used greatest stack depth: 6144 bytes left
[ 0.180426] qup_i2c f9927000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.182473] qup_i2c f9928000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.184837] qup_i2c f9925000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.188710] sps:sps is ready.
[ 0.190434] gdsc_vfe:
[ 0.190884] gdsc_oxili_cx:
[ 0.191507] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[ 0.192862] msm_bus_fabric fc478000.msm-mmss-noc: msmbus_coresight initialized
[ 0.193987] msm_bus_fabric fc460000.msm-sys-noc: msmbus_coresight initialized
[ 0.194871] msm_bus_fabric fc468000.msm-periph-noc: msmbus_coresight initialized
[ 0.196390] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 5120
[ 0.197105] msm_bus_fabric fc380000.msm-bimc: msmbus_coresight initialized
[ 0.229687] bio: create slab <bio-0> at 0
[ 0.230897] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
[ 0.231500] ION heap vmalloc created
[ 0.231658] ION heap kmalloc created
[ 0.231719] ION heap iommu created
[ 0.231749] ION heap qsecom created
[ 0.231784] ION heap pil_1 created at 0x0c500000 with size 1300000
[ 0.231831] ION heap pil_2 created at 0x08800000 with size 3d00000
[ 0.233293] Linux media interface: v0.10
[ 0.233387] Linux video capture interface: v2.00
[ 0.235056] msm_iommu_dev_v0: lpass_iommu enabled remote spinlock
[ 0.236220] msm_iommu_dev_v0: device lpass_iommu mapped at c88e0000, with 4 ctx banks
[ 0.238572] msm_iommu_dev_v0: device copss_iommu mapped at c8960000, with 8 ctx banks
[ 0.239364] msm_iommu_dev_v0: device mdpe_iommu mapped at c8b20000, with 2 ctx banks
[ 0.240076] msm_iommu_dev_v0: device mdps_iommu mapped at c8b40000, with 2 ctx banks
[ 0.241082] msm_iommu_dev_v0: device gfx_iommu mapped at c8b60000, with 3 ctx banks
[ 0.241528] msm_iommu_dev_v0: device vfe_iommu mapped at c8b80000, with 1 ctx banks
[ 0.242737] msm_iommu_ctx fd000000.qcom,iommu-ctx: context q6_fw using bank 0
[ 0.242922] msm_iommu_ctx fd001000.qcom,iommu-ctx: context audio_shared using bank 1
[ 0.243102] msm_iommu_ctx fd002000.qcom,iommu-ctx: context video_shared using bank 2
[ 0.243367] msm_iommu_ctx fd003000.qcom,iommu-ctx: context q6_spare using bank 3
[ 0.243583] msm_iommu_ctx fd010000.qcom,iommu-ctx: context copss_0 using bank 0
[ 0.243769] msm_iommu_ctx fd011000.qcom,iommu-ctx: context copss_1 using bank 1
[ 0.244101] msm_iommu_ctx fd012000.qcom,iommu-ctx: context copss_2 using bank 2
[ 0.244529] msm_iommu_ctx fd013000.qcom,iommu-ctx: context copss_3 using bank 3
[ 0.244717] msm_iommu_ctx fd014000.qcom,iommu-ctx: context copss_4 using bank 4
[ 0.244902] msm_iommu_ctx fd015000.qcom,iommu-ctx: context copss_5 using bank 5
[ 0.245158] msm_iommu_ctx fd016000.qcom,iommu-ctx: context copss_6 using bank 6
[ 0.245341] msm_iommu_ctx fd017000.qcom,iommu-ctx: context copss_7 using bank 7
[ 0.245593] msm_iommu_ctx fd860000.qcom,iommu-ctx: context mdpe_0 using bank 0
[ 0.245778] msm_iommu_ctx fd861000.qcom,iommu-ctx: context mdpe_1 using bank 1
[ 0.245991] msm_iommu_ctx fd870000.qcom,iommu-ctx: context mdps_0 using bank 0
[ 0.246174] msm_iommu_ctx fd871000.qcom,iommu-ctx: context mdps_1 using bank 1
[ 0.246489] msm_iommu_ctx fd880000.qcom,iommu-ctx: context gfx3d_user using bank 0
[ 0.246771] msm_iommu_ctx fd881000.qcom,iommu-ctx: context gfx3d_priv using bank 1
[ 0.246959] msm_iommu_ctx fd882000.qcom,iommu-ctx: context gfx3d_spare using bank 2
[ 0.247226] msm_iommu_ctx fd890000.qcom,iommu-ctx: context vfe0 using bank 0
[ 0.247408] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.248270] Bluetooth: Core ver 2.16
[ 0.248342] NET: Registered protocol family 31
[ 0.248353] Bluetooth: HCI device and connection manager initialized
[ 0.248370] Bluetooth: HCI socket layer initialized
[ 0.248383] Bluetooth: L2CAP socket layer initialized
[ 0.248698] Bluetooth: SCO socket layer initialized
[ 0.249130] cfg80211: Calling CRDA to update world regulatory domain
[ 0.249182] cfg80211: World regulatory domain updated:
[ 0.249195] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.249211] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.249227] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.249242] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 0.249258] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.249273] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.249934] Switching to clocksource arch_sys_counter
[ 0.303370] NET: Registered protocol family 2
[ 0.303840] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.305284] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.308555] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[ 0.309003] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.309016] TCP: reno registered
[ 0.309134] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.309266] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.309713] NET: Registered protocol family 1
[ 0.310357] Trying to unpack rootfs image as initramfs...
[ 0.353578] Freeing initrd memory: 448K
[ 0.359084] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
[ 0.360158] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
[ 0.360365] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
[ 0.361373] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
[ 0.361583] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
[ 0.362611] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
[ 0.362856] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
[ 0.363923] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
[ 0.364129] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
[ 0.365187] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
[ 0.365433] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
[ 0.366520] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
[ 0.366739] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
[ 0.367858] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
[ 0.369478] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
[ 0.374402] pil_pronto fb21b000.qcom,pronto: using secure boot
[ 0.383643] NET: Registered protocol family 27
[ 0.386264] platform qcom,msm-audio-ion.30: Driver msm-audio-ion requests probe deferral
[ 0.391464] find_cur_cpu_level: CPUs are running at an unknown rate. Defaulting to 1190400 KHz.
[ 0.391771] cpufreq_table_init: CPU: 6 scaling frequencies supported.
[ 0.392988] msm_rpmrbcpr_memalloc: Invalid num corners 4, num recmnds 3
[ 0.393021] msm_rpmrbcpr_stats: probe of fc000000.qcom,rpm-rbcpr-stats failed with error -14
[ 0.393410] msm_rpm_log_probe: OK
[ 0.405452] audit: initializing netlink socket (disabled)
[ 0.405502] type=2000 audit(0.390:1): initialized
[ 0.523309] fuse init (API version 7.18)
[ 0.523805] msgmni has been set to 792
[ 0.525904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.525918] io scheduler noop registered
[ 0.525925] io scheduler deadline registered
[ 0.525945] io scheduler row registered
[ 0.526112] io scheduler cfq registered (default)
[ 0.526121] io scheduler test-iosched registered
[ 0.526402] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc0 incorrect owner 2
[ 0.526492] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc1 incorrect owner 5
[ 0.526581] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc2 incorrect owner 4
[ 0.526662] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc3 incorrect owner 2
[ 0.526792] gpiochip_add: registered GPIOs 572 to 575 on device: pm8110-gpio
[ 0.527112] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa3 incorrect owner 2
[ 0.527234] gpiochip_add: registered GPIOs 570 to 571 on device: pm8110-mpp
[ 0.529298] mdss_dsi_panel_init: Panel Name = TIANMA OTM9605A QHD video mode dsi panel
[ 0.529527] mdss_dsi_panel_init:977 Continuous splash flag enabled.
[ 0.529538] mdss_dsi_panel_init:989 Partial update disabled.
[ 0.529596] dsi_parse_gpio:156, Disp_en gpio not specified
[ 0.530121] mdss_register_panel: adding framebuffer device fdd00000.qcom,mdss_dsi
[ 0.562286] mdss_fb_register: FrameBuffer[0] 540x960 size=0 registered successfully!
[ 0.604126] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
[ 0.604148] AXI: get_pdata(): Error: Client name not found
[ 0.604156] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[ 0.604164] msm_serial_hsl_probe: Bus scaling is disabled
[ 0.604296] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
[ 0.604359] msm_hsl_console_setup: console setup on port #0
[ 2.164989] console [ttyHSL0] enabled
[ 2.169012] msm_serial_hsl_init: driver initialized
[ 2.177459] diagchar initialized now
[ 2.182406] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
[ 2.199187] brd: module loaded
[ 2.205008] loop: module loaded
[ 2.207539] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
[ 2.212000] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
[ 2.217522] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x0
[ 2.223158] QSEECOM: qseecom_probe: secure app region addr=0xda00000 size=0x100000
[ 2.231263] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[ 2.237574] i2c-core: driver [tabla-i2c-core] using legacy resume method
[ 2.244441] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[ 2.251224] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[ 2.258591] sps: BAM device 0xf9904000 is not registered yet.
[ 2.263824] sps:BAM 0xf9904000 is registered.
[ 2.268277] sps:BAM 0xf9904000 (va:0xc8be0000) enabled: ver:0x15, number of pipes:24
[ 2.276289] spi_qsd f9926000.spi: master is unqueued, this is deprecated
[ 2.283681] tun: Universal TUN/TAP device driver, 1.6
[ 2.287689] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 2.293972] rmnet_init: BAM devices[9]
[ 2.305974] PPP generic driver version 2.4.2
[ 2.309350] PPP BSD Compression module registered
[ 2.313923] PPP Deflate Compression module registered
[ 2.319701] PPP MPPE Compression module registered
[ 2.323723] NET: Registered protocol family 24
[ 2.328443] wcnss_wlan probed in built-in mode
[ 2.334868] msm_otg f9a55000.usb: msm_otg probe
[ 2.338816] msm_otg f9a55000.usb: OTG regs = c8942000
[ 2.346358] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
[ 2.351292] msm_otg f9a55000.usb: phy_reset: success
[ 2.356882] mbim_init: initialize 1 instances
[ 2.360660] mbim_init: Initialized 1 ports
[ 2.366603] rndis_qc_init: initialize rndis QC instance
[ 2.371478] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.377643] android_usb gadget: Number of LUNs=3
[ 2.382273] lun0: LUN: removable file: (no medium)
[ 2.387105] lun1: LUN: removable read only CD-ROM file: (no medium)
[ 2.393461] lun2: LUN: removable file: (no medium)
[ 2.398640] android_usb gadget: android_usb ready
[ 2.404431] [himax] himax_ts_init
[ 2.406746] wxun: himax_ts_probe: irq set here
[ 2.411331] [HIMAX PORTING MSG]himax_ts_probe ts->client->irq =330
[ 2.417382] wxun: himax_ts_probe: reset set here
[ 2.422091] ------------[ cut here ]------------
[ 2.426678] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[ 2.437343] autorequest GPIO-0
[ 2.440381] Modules linked in:
[ 2.443438] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[ 2.452890] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[ 2.462438] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[ 2.472075] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[ 2.482145] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c05355c8>] (himax_ts_probe+0x174/0xc64)
[ 2.491780] [<c05355c8>] (himax_ts_probe+0x174/0xc64) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[ 2.500893] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[ 2.510353] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[ 2.519730] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[ 2.528758] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[ 2.537784] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[ 2.546814] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[ 2.556189] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[ 2.565650] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[ 2.574505] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[ 2.583288] ---[ end trace be0e6727fdadba5f ]---
[ 2.910492] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 2.916426] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[ 2.940150] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 2.946083] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[ 2.970148] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 2.976080] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[ 3.000018] [TP] i2c_himax_read: i2c_read_block retry over 3
[ 3.004633] himax_ts_probe other driver has been loaded
[ 3.009922] msg26xx: msg26xx_ts_init
[ 3.013461] msg26xx: TPD probe
[ 3.016439] ------------[ cut here ]------------
[ 3.021044] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[ 3.031715] autorequest GPIO-0
[ 3.034752] Modules linked in:
[ 3.037802] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[ 3.047260] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[ 3.056810] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[ 3.066446] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[ 3.076515] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c0538984>] (tpd_probe+0x3c/0x748)
[ 3.085629] [<c0538984>] (tpd_probe+0x3c/0x748) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[ 3.094222] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[ 3.103683] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[ 3.113060] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[ 3.122087] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[ 3.131113] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[ 3.140142] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[ 3.149518] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[ 3.158979] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[ 3.167834] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[ 3.176594] ---[ end trace be0e6727fdadba60 ]---
[ 3.520155] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 3.526088] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[ 3.532362] _msg_WriteI2CSeq error -107,addr = 38
[ 3.537011] msg26xx: _msg_GetVersion ret = -107
[ 3.570148] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 3.576080] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[ 3.582352] _msg_WriteI2CSeq error -107,addr = 38
[ 3.587001] msg26xx: _msg_GetVersion ret = -107
[ 3.620148] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 3.626079] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[ 3.632351] _msg_WriteI2CSeq error -107,addr = 38
[ 3.637002] msg26xx: _msg_GetVersion ret = -107
[ 3.670016] msg26xx: may be there is not msg26xx tp
[ 3.673949] msg26xx: probe of 1-0026 failed with error 19
[ 3.679408] FTS: ft5x0x_ts_probe enter
[ 3.683128] FTS: irq = 330
[ 4.110899] FTS: --------ft5x0x_read_version---------fwversion=b,module=5d
[ 4.117361] input: ft5x0x_ts as /devices/virtual/input/input0
[ 4.280170] ft5x0x_ts 1-0038: Create proc entry success!
[ 4.284888] FTS: Firmware version = 0xb
[ 4.288785] FTS: report rate is 100Hz.
[ 4.292628] FTS: touch threshold is 48.
[ 4.296280] input: proximity as /devices/f9923000.i2c/i2c-1/1-0038/input/input1
[ 4.303492] FTS: tp_prox_setup_polled_device, err=0, poll-interval=100
[ 4.309934] Successfully added driver ft5x0x_ts
[ 4.314407] ctp_selftest_init
[ 4.317423] create_proc_entry g_ctp_selftest_proc success
[ 4.322741] ctp_upgrade_init
[ 4.325659] [elan] create_proc_entry 222 success
[ 4.330213] create_proc_entry success
[ 4.333830] ctp_if_upgrade_init
[ 4.337033] ctp_if_upgrade_init create_proc_entry 222 success
[ 4.342713] create_proc_entry success
[ 4.346336] create_proc_entry success
[ 4.350047] bma2x2_probe:
[ 4.380567] bma2x2_probe: chipid=20f8
[ 4.383404] input: accelerometer as /devices/f9925000.i2c/i2c-0/0-0018/input/input2
[ 4.390960] bma2x2_disable,start
[ 4.394736] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1955, h:m:s == 0:32:35, d/m/y = 1/0/70
[ 4.402327] qcom,qpnp-rtc qpnp-rtc-de519800: Alarm set for - h:r:s=1:36:21, d/m/y=1/0/70
[ 4.410402] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1955, h:m:s == 0:32:35, d/m/y = 1/0/70
[ 4.418911] using rtc device, qpnp_rtc, for alarms
[ 4.423244] qcom,qpnp-rtc qpnp-rtc-de519800: rtc core: registered qpnp_rtc as rtc0
[ 4.431130] qcom,qpnp-rtc qpnp-rtc-de519800: Probe success !!
[ 4.436697] i2c /dev entries driver
[ 4.446492] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[ 4.452324] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[ 4.459284] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[ 4.465963] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[ 4.473401] s5k4e1_init_module:153
[ 4.476463] s5k4e1_init_module:158 rc -19
[ 4.481000] zgc2235_init_module:141
[ 4.483925] zgc2235_init_module:146 rc -19
[ 4.487690] msm_sensor_i2c_probe gc2235_i2c_probe called
[ 4.492972] msm_sensor_i2c_probe: of_node exisists
[ 4.497556] msm_sensor_get_dt_data qcom,sensor-name gc2235, rc 0
[ 4.503738] msm_sensor_get_dt_data qcom,sensor-mode 0, rc 0
[ 4.509271] msm_sensor_get_dt_data qcom,sensor-position 1, rc 0
[ 4.515193] msm_sensor_get_dt_data qcom,mount-angle 270, rc 0
[ 4.520922] msm_sensor_get_dt_data qcom,cci-master 0, rc 0
[ 4.526373] msm_sensor_get_sub_module_index:75 src_node NULL
[ 4.532035] msm_sensor_get_sub_module_index:92 eeprom src_node NULL
[ 4.538281] msm_sensor_get_sub_module_index qcom,led flash cell index 1, rc 0
[ 4.545407] msm_sensor_get_sub_module_index csiphy_core[0] = 1
[ 4.551220] msm_sensor_get_sub_module_index csid_core[0] = 1
[ 4.556844] msm_sensor_get_dt_csi_data qcom,csi-lane-assign e4, rc 0
[ 4.563198] msm_sensor_get_dt_csi_data qcom,csi-lane-mask 3, rc 0
[ 4.569255] msm_sensor_get_dt_vreg_data qcom,cam-vreg-name count 3
[ 4.575438] msm_sensor_get_dt_vreg_data reg_name[0] = cam_vdig
[ 4.581253] msm_sensor_get_dt_vreg_data reg_name[1] = cam_vio
[ 4.586962] msm_sensor_get_dt_vreg_data reg_name[2] = cam_vana
[ 4.592799] msm_sensor_get_dt_vreg_data cam_vreg[0].type = 0
[ 4.598420] msm_sensor_get_dt_vreg_data cam_vreg[1].type = 0
[ 4.604081] msm_sensor_get_dt_vreg_data cam_vreg[2].type = 0
[ 4.609706] msm_sensor_get_dt_vreg_data cam_vreg[0].min_voltage = 1800000
[ 4.616494] msm_sensor_get_dt_vreg_data cam_vreg[1].min_voltage = 1800000
[ 4.623264] msm_sensor_get_dt_vreg_data cam_vreg[2].min_voltage = 2850000
[ 4.630038] msm_sensor_get_dt_vreg_data cam_vreg[0].max_voltage = 1800000
[ 4.636787] msm_sensor_get_dt_vreg_data cam_vreg[1].max_voltage = 1800000
[ 4.643577] msm_sensor_get_dt_vreg_data cam_vreg[2].max_voltage = 2850000
[ 4.650349] msm_sensor_get_dt_vreg_data cam_vreg[0].op_mode = 200000
[ 4.656666] msm_sensor_get_dt_vreg_data cam_vreg[1].op_mode = 200000
[ 4.663021] msm_sensor_get_dt_vreg_data cam_vreg[2].op_mode = 80000
[ 4.669289] msm_sensor_get_dt_data gpio count 3
[ 4.673797] msm_sensor_get_dt_data gpio_array[0] = 13
[ 4.678809] msm_sensor_get_dt_data gpio_array[1] = 15
[ 4.683907] msm_sensor_get_dt_data gpio_array[2] = 85
[ 4.688878] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].gpio = 13
[ 4.695578] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].gpio = 15
[ 4.702258] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].gpio = 85
[ 4.708926] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].flags = 1
[ 4.715626] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].flags = 0
[ 4.722309] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].flags = 0
[ 4.728978] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].label = CAMIF_MCLK
[ 4.736461] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].label = CAM_RESET
[ 4.743839] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].label = CAM_STANDBY
[ 4.751396] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 15
[ 4.756929] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 85
[ 4.762512] msm_sensor_get_dt_actuator_data qcom,actuator-cam-name 0, rc -22
[ 4.769517] msm_sensor_get_dt_data qcom,misc_regulator (null), rc -22
[ 4.775960] msm_sensor_power_up:991
[ 4.779427] msm_sensor_power_up index 0
[ 4.783247] msm_sensor_power_up type 2
[ 4.798356] msm_sensor_power_up index 1
[ 4.801169] msm_sensor_power_up type 2
[ 4.816228] msm_sensor_power_up index 2
[ 4.819020] msm_sensor_power_up type 2
[ 4.834044] msm_sensor_power_up index 3
[ 4.836834] msm_sensor_power_up type 0
[ 4.846640] msm_sensor_power_up index 4
[ 4.849431] msm_sensor_power_up type 1
[ 4.900020] msm_sensor_power_up index 5
[ 4.902812] msm_sensor_power_up type 1
[ 4.950019] msm_sensor_power_up index 6
[ 4.952809] msm_sensor_power_up type 1
[ 5.000018] msm_sensor_power_up index 7
[ 5.002808] msm_sensor_power_up type 1
[ 5.050034] msm_sensor_power_up index 8
[ 5.052824] msm_sensor_power_up type 3
[ 5.056812] qup_i2c f9928000.i2c: QUP: I2C status flags :0xc1343c8, irq:132
[ 5.063522] qup_i2c f9928000.i2c: I2C slave addr:0x21 not connected
[ 5.069770] msm_sensor_match_id: gc2235: read id failed
[ 5.074984] msm_sensor_power_up:1095 match id failed rc -107
[ 5.080621] msm_sensor_power_up:1102 failed
[ 5.084769] msm_sensor_power_up index 8
[ 5.088589] msm_sensor_power_up type 3
[ 5.092341] msm_sensor_power_up index 7
[ 5.096141] msm_sensor_power_up type 1
[ 5.140021] msm_sensor_power_up index 6
[ 5.142811] msm_sensor_power_up type 1
[ 5.190015] msm_sensor_power_up index 5
[ 5.192805] msm_sensor_power_up type 1
[ 5.240019] msm_sensor_power_up index 4
[ 5.242809] msm_sensor_power_up type 1
[ 5.290098] msm_sensor_power_up index 3
[ 5.292888] msm_sensor_power_up type 0
[ 5.302653] msm_sensor_power_up index 2
[ 5.305443] msm_sensor_power_up type 2
[ 5.320440] msm_sensor_power_up index 1
[ 5.323231] msm_sensor_power_up type 2
[ 5.338252] msm_sensor_power_up index 0
[ 5.341065] msm_sensor_power_up type 2
[ 5.356073] msm_sensor_i2c_probe gc2235 power up failed
[ 5.360285] gc2235: probe of 6-0078 failed with error -107
[ 5.368762] lirc_dev: IR Remote Control driver registered, major 241
[ 5.374190] IR NEC protocol handler initialized
[ 5.378672] IR RC5(x) protocol handler initialized
[ 5.383466] IR RC6 protocol handler initialized
[ 5.387961] IR JVC protocol handler initialized
[ 5.392494] IR Sony protocol handler initialized
[ 5.397077] IR RC5 (streamzap) protocol handler initialized
[ 5.402649] IR SANYO protocol handler initialized
[ 5.407319] IR MCE Keyboard/mouse protocol handler initialized
[ 5.413154] IR LIRC bridge handler initialized
[ 5.418101] BMS: qpnp_bms_init: QPNP BMS INIT
[ 5.422009] spmi qpnp-bms-de519600: Driver qcom,qpnp-bms requests probe deferral
[ 5.429441] spmi qpnp-charger-de518800: Driver qcom,qpnp-charger requests probe deferral
[ 5.475024] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 5.483622] cpuidle: using governor ladder
[ 5.487288] cpuidle: using governor menu
[ 5.490654] sdhci: Secure Digital Host Controller Interface driver
[ 5.496743] sdhci: Copyright(c) Pierre Ossman
[ 5.501565] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.507124] AXI: get_pdata(): Error: Client name not found
[ 5.512227] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[ 5.520654] mmc0: no vmmc regulator found
[ 5.525981] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
[ 5.531954] AXI: get_pdata(): Error: Client name not found
[ 5.537109] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[ 5.546376] mmc1: no vmmc regulator found
[ 5.551679] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
[ 5.559222] zram: Created 1 device(s) ...
[ 5.566903] ashmem: initialized
[ 5.569119] logger: created 256K log 'log_main'
[ 5.575653] logger: created 256K log 'log_events'
[ 5.581445] logger: created 256K log 'log_radio'
[ 5.587135] logger: created 256K log 'log_system'
[ 5.595455] sps:BAM 0xf9a44000 is registered.
[ 5.600644] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
[ 5.609179] PMIC@SID0 Power-on reason: Triggered from KPD (power key press) and 'cold' boot
[ 5.618803] input: qpnp_pon as /devices/virtual/input/input3
[ 5.626236] PMIC@SID0: PM8110 v2.0 options: 0, 0, 0, 0
[ 5.630656] coresight-fuse fc4be024.fuse: Fuse initialized
[ 5.636282] coresight-cti fc310000.cti: CTI initialized
[ 5.641188] coresight-cti fc311000.cti: CTI initialized
[ 5.646381] coresight-cti fc312000.cti: CTI initialized
[ 5.651593] coresight-cti fc313000.cti: CTI initialized
[ 5.656768] coresight-cti fc314000.cti: CTI initialized
[ 5.662041] coresight-cti fc315000.cti: CTI initialized
[ 5.667187] coresight-cti fc316000.cti: CTI initialized
[ 5.672429] coresight-cti fc317000.cti: CTI initialized
[ 5.677632] coresight-cti fc318000.cti: CTI initialized
[ 5.682916] coresight-cti fc351000.cti: CTI initialized
[ 5.688046] coresight-cti fc352000.cti: CTI initialized
[ 5.693287] coresight-cti fc353000.cti: CTI initialized
[ 5.698468] coresight-cti fc354000.cti: CTI initialized
[ 5.703712] coresight-cti fc335000.cti: CTI initialized
[ 5.708860] coresight-cti fc338000.cti: CTI initialized
[ 5.713987] mmc0: BKOPS_EN bit = 0
[ 5.714129] coresight-cti fc33c000.cti: CTI initialized
[ 5.714278] coresight-cti fc360000.cti: CTI initialized
[ 5.714768] coresight-csr fc301000.csr: CSR initialized
[ 5.735842] coresight-tmc fc326000.tmc: Byte Counter feature enabled
[ 5.741258] sps:BAM 0xfc37c000 is registered.
[ 5.745625] coresight-tmc fc326000.tmc: TMC initialized
[ 5.751201] coresight-tmc fc325000.tmc: TMC initialized
[ 5.756714] coresight-tpiu fc320000.tpiu: seta gpios not specified
[ 5.762124] coresight-tpiu fc320000.tpiu: setb gpios not specified
[ 5.768387] coresight-tpiu fc320000.tpiu: TPIU initialized
[ 5.774475] coresight-funnel fc323000.funnel: FUNNEL initialized
[ 5.779893] coresight-funnel fc321000.funnel: FUNNEL initialized
[ 5.785890] coresight-funnel fc322000.funnel: FUNNEL initialized
[ 5.791880] coresight-funnel fc355000.funnel: FUNNEL initialized
[ 5.797727] mmc0: new HS200 MMC card at address 0001
[ 5.798166] coresight-replicator fc324000.replicator: REPLICATOR initialized
[ 5.798760] coresight-stm fc302000.stm: STM initialized
[ 5.799252] coresight-hwevent fd820018.hwevent: Hardware Event driver initialized
[ 5.799955] coresight-etm fc34c000.etm: ETM initialized
[ 5.827822] coresight-etm fc34d000.etm: ETM initialized
[ 5.832913] mmcblk0: mmc0:0001 H4G1d 3.64 GiB
[ 5.833248] coresight-etm fc34e000.etm: ETM initialized
[ 5.833589] coresight-etm fc34f000.etm: ETM initialized
[ 5.834176] coresight-audio-etm audio_etm0.1: Audio ETM initialized
[ 5.834662] coresight-modem-etm modem_etm0.2: Modem ETM initialized
[ 5.835138] coresight-wcn-etm wcn_etm0.3: Wireless ETM initialized
[ 5.835602] coresight-rpm-etm rpm_etm0.4: RPM ETM initialized
[ 5.836752] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 5.836771] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 5.844155] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
[ 5.844709] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
[ 5.845489] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[ 5.845882] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[ 5.848843] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 5.849192] Netfilter messages via NETLINK v0.30.
[ 5.849285] nf_conntrack version 0.5.0 (6339 buckets, 25356 max)
[ 5.850123] ctnetlink v0.93: registering with nfnetlink.
[ 5.850528] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 5.850538] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 5.850845] xt_time: kernel timezone is -0000
[ 5.851280] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.851603] arp_tables: (C) 2002 David S. Miller
[ 5.851675] TCP: cubic registered
[ 5.852500] NET: Registered protocol family 10
[ 5.855899] Mobile IPv6
[ 5.855943] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 5.856150] IPv6 over IPv4 tunneling driver
[ 5.856820] NET: Registered protocol family 17
[ 5.856918] Bridge firewalling registered
[ 5.856936] Ebtables v2.0 registered
[ 5.998837] Bluetooth: RFCOMM TTY layer initialized
[ 6.003692] Bluetooth: RFCOMM socket layer initialized
[ 6.003735] mmcblk0rpmb: mmc0:0001 H4G1d partition 3 4.00 MiB
[ 6.006853] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22
[ 6.023685] Bluetooth: RFCOMM ver 1.11
[ 6.027354] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.032668] Bluetooth: BNEP filters: protocol multicast
[ 6.037860] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 6.044226] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[ 6.051446] Registering SWP/SWPB emulation handler
[ 6.062033] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 6.068428] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[ 6.076673] input: gpio-keys as /devices/gpio_keys.60/input/input4
[ 6.081848] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[ 6.082269] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1956, h:m:s == 0:32:36, d/m/y = 1/0/70
[ 6.097470] qcom,qpnp-rtc qpnp-rtc-de519800: setting system clock to 1970-01-01 00:32:36 UTC (1956)
[ 6.097560] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[ 6.097820] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[ 6.097828] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[ 6.097843] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[ 6.097929] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 6.097943] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.103082] batfet:
[ 6.114153] msm_otg f9a55000.usb: USB in low power mode
[ 6.114283] qcom,qpnp-charger:qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 0, dc = 0 b_health = 0 batt_present = 7
[ 6.148138] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1956, h:m:s == 0:32:36, d/m/y = 1/0/70
[ 6.180717] clock_late_init: Removing enables held for handed-off clocks
[ 6.189569] ALSA device list:
[ 6.191526] No soundcards f[ 6.195497] Freeing init memory: 72K
[ 6.198400] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1956, h:m:s == 0:32:36, d/m/y = 1/0/70
[ 6.244875] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[ 6.252256] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[ 6.262562] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[ 6.301045] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[ 6.308388] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[ 6.314195] type=1403 audit(1956.720:2): policy loaded auid=4294967295 ses=4294967295
[ 6.314754] SELinux: Loaded policy from (null)
[ 6.321936] init: /init.qcom.rc: 259: ignored duplicate definition of service 'usbhub_init'
[ 6.322674] init: /init.qcom.rc: 672: invalid command '/system/bin/log'
[ 6.325407] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[ 6.331383] init: invalid uid 'fm_radio'
[ 6.356387] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[ 6.391222] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[ 6.398551] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[ 6.406777] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[ 6.446040] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[ 6.453483] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[ 6.472729] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[ 6.480057] BMS: qpnp_bms_probe: probe success: soc =100 vbatt = 3954645 ocv = 4067154 r_sense_uohm = 9406 warm_reset = 0
[ 6.491961] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 6.498286] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 6.506001] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.513855] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 6.520788] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.528176] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 6.998340] init: cannot open '/initlogo.rle'
[ 7.104858] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1
[ 7.326693] EXT4-fs (mmcblk0p22): recovery complete
[ 7.331483] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 7.409847] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
[ 7.457139] e2fsck used greatest stack depth: 5328 bytes left
[ 7.461934] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[ 7.466463] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 1011/131072 files, 49713/524288 blocks
[ 7.483898] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
[ 7.493052] init used greatest stack depth: 5212 bytes left
[ 7.509915] EXT4-fs (mmcblk0p14): recovery complete
[ 7.514762] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1
[ 7.522853] EXT4-fs (mmcblk0p21): <<<<<wzg Opt_gid
[ 7.532286] EXT4-fs (mmcblk0p21): recovery complete
[ 7.537094] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: gid=1015
[ 7.544533] SELinux: Context u:object_r:blinkfeed_file:s0 is not valid (left unmapped).
[ 7.562543] EXT4-fs (mmcblk0p13): recovery complete
[ 7.567342] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: barrier=1
[ 7.629217] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
[ 7.639189] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
[ 7.657108] pil-q6v5-lpass fe200000.qcom,lpass: adsp: loading from 0x0c500000 to 0x0d200000
[ 7.865546] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset
[ 7.917839] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Power/Clock ready interrupt received
[ 7.931301] pil-q6v5-lpass fe200000.qcom,lpass: Subsystem error monitoring/handling services are up
[ 7.940318] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 7.940754] apr_tal:Q6 Is Up
[ 7.941624] adsp-loader qcom,msm-adsp-loader.29: adsp_loader_do: Q6/ADSP image is loaded
[ 7.943030] diag: In diag_send_msg_mask_update, invalid status 0
[ 7.943054] diag: In diag_send_log_mask_update, invalid status 0
[ 7.969491] msm8x10-wcd-i2c-core 5-000d: adsp is ready
[ 7.974706] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdda-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
[ 7.974712]
[ 7.986083] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-px: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
[ 7.986089]
[ 7.997585] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-1p2v: vol=[1200000 1200000]uV, curr=[5000]uA, ond 0
[ 7.997594]
[ 8.009108] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdda-cp: vol=[1800000 2150000]uV, curr=[650000]uA, ond 1
[ 8.009115]
[ 8.020788] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-mic-bias: vol=[3075000 3075000]uV, curr=[25000]uA, ond 1
[ 8.020794]
[ 8.035591] wcd9xxx_core_res_init: num_irqs = 24, num_irq_regs = 3
[ 8.045367] msm8x10-wcd-i2c-core msm8x10_wcd_codec: msm8x10_wcd_i2c_probe: irq initialization passed
[ 8.055094] wcd9xxx_resmgr_init
[ 8.074425] wcd9xxx_mbhc_init: enter
[ 8.081106] wcd9xxx_mbhc_init: leave ret 0
[ 8.131982] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[ 8.138529] wcd9xxx_event_notify: leave
[ 8.143333] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[ 8.149909] wcd9xxx_event_notify: leave
[ 8.154701] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[ 8.161302] wcd9xxx_event_notify: leave
[ 8.166051] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[ 8.172679] wcd9xxx_event_notify: leave
[ 8.179454] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
[ 8.184828] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
[ 8.190552] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
[ 8.196096] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
[ 8.201543] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
[ 8.207050] asoc: snd-soc-dummy-dai <-> SEC_MI2S_RX_HOSTLESS mapping ok
[ 8.213759] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
[ 8.219840] asoc: msm-stub-rx <-> msm-dai-q6-dev.241 mapping ok
[ 8.225721] asoc: msm-stub-tx <-> msm-dai-q6-dev.240 mapping ok
[ 8.231984] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
[ 8.237799] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
[ 8.243882] asoc: snd-soc-dummy-dai <-> PRI_MI2S_TX_HOSTLESS mapping ok
[ 8.250583] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
[ 8.256349] asoc: snd-soc-dummy-dai <-> Voice2 mapping ok
[ 8.261683] asoc: snd-soc-dummy-dai <-> QCHAT mapping ok
[ 8.266829] msm8x10-wcd-i2c-core msm8x10_wcd_codec: dapm: unknown pin Lineout amp
[ 8.274110] asoc: msm8x10_wcd_i2s_rx1 <-> msm-dai-q6-mi2s.1 mapping ok
[ 8.280854] asoc: msm8x10_wcd_i2s_tx1 <-> msm-dai-q6-mi2s.0 mapping ok
[ 8.287114] asoc: msm-stub-rx <-> msm-dai-q6-dev.12288 mapping ok
[ 8.293201] asoc: msm-stub-tx <-> msm-dai-q6-dev.12289 mapping ok
[ 8.299224] asoc: msm-stub-rx <-> msm-dai-q6-dev.12292 mapping ok
[ 8.305368] asoc: msm-stub-tx <-> msm-dai-q6-dev.12293 mapping ok
[ 8.311421] asoc: msm-stub-rx <-> msm-dai-q6-dev.224 mapping ok
[ 8.317444] asoc: msm-stub-tx <-> msm-dai-q6-dev.225 mapping ok
[ 8.323292] asoc: msm-stub-tx <-> msm-dai-q6-dev.32772 mapping ok
[ 8.329272] asoc: msm-stub-tx <-> msm-dai-q6-dev.32771 mapping ok
[ 8.335391] asoc: msm-stub-rx <-> msm-dai-q6-dev.32773 mapping ok
[ 8.350924] input: Button Jack as /devices/sound.37/sound/card0/input5
[ 8.356858] input: Headset Jack as /devices/sound.37/sound/card0/input6
[ 8.406682] wcnss_wlan triggered by userspace
[ 8.440575] wcnss_trigger_config: adc get failed
[ 8.447652] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[ 8.457112] init: cannot find '/system/bin/nac_server', disabling 'nac_server'
[ 8.469843] init: cannot find '/system/bin/qrngd', disabling 'qrngd'
[ 8.479602] pil_pronto fb21b000.qcom,pronto: wcnss: loading from 0x0d200000 to 0x0d6ee000
[ 8.542772] init: cannot find '/system/bin/wiperiface', disabling 'wiperiface'
[ 8.555650] init: cannot find '/system/bin/ssr_diag', disabling 'ssr_diag'
shell@msm8610:/ $ [ 9.174951] cp used greatest stack depth: 5068 bytes left
[ 9.347914] diag: In diag_send_msg_mask_update, invalid status 0
[ 9.352942] diag: In diag_send_log_mask_update, invalid status 0
[ 9.386308] msm_isp_close_node: halt timeout rc=0
[ 9.397231] msm_tsens_get_temp: tsens mapping index not found
[ 9.402154] msm_tsens_get_temp: tsens mapping index not found
[ 9.407694] msm_tsens_get_temp: tsens mapping index not found
[ 9.413599] msm_tsens_get_temp: tsens mapping index not found
[ 9.419140] msm_tsens_get_temp: tsens mapping index not found
[ 9.424919] msm_tsens_get_temp: tsens mapping index not found
[ 9.426118] init: untracked pid 272 exited
[ 9.428521] enable_store: android_usb: already disabled
[ 9.442651] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 9.450681] Error: Driver 'DS' is already registered, aborting...
[ 9.461402] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 9.554612] wcnss: no space available for smd frame
[ 9.580180] wcnss: no space available for smd frame
[ 9.605695] msm_audio_ion_import: DMA Buf name=audio_acdb_client, fd=18 handle=dd443480
[ 9.612358] wcnss: no space available for smd frame
[ 9.640241] wcnss: no space available for smd frame
[ 9.672614] wcnss: not setting up vbatt
[ 9.692668] init: untracked pid 379 exited
[ 9.810087] ------------[ cut here ]------------
[ 9.810124] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[ 9.810132] Unbalanced enable for IRQ 330
[ 9.810372] ---[ end trace be0e6727fdadba62 ]---
[ 10.070078] ------------[ cut here ]------------
[ 10.070109] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[ 10.070117] Unbalanced enable for IRQ 330
[ 10.070345] ---[ end trace be0e6727fdadba63 ]---
[ 10.757051] Notify: smsm init
[ 11.051675] diag: In diag_send_msg_mask_update, invalid status 0
[ 11.056486] diag: In diag_send_log_mask_update, invalid status 0
[ 16.297292] ------------[ cut here ]------------
[ 16.300921] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[ 16.312032] ---[ end trace be0e6727fdadba64 ]---
[ 16.399593] dsi_panel_handler enable=0
[ 16.648541] dsi_panel_handler enable=1
[ 22.728592] pgd = dcd84000
[ 22.730387] [00000001] *pgd=00000000
[ 22.785039] pgd = dcd84000
[ 22.786719] [00000001] *pgd=00000000
[ 22.934333] pgd = dcd84000
[ 22.936000] [00000001] *pgd=00000000
[ 25.128959] AsyncTask #1 used greatest stack depth: 4820 bytes left
[ 45.075616] dsi_panel_handler enable=0
[ 46.965773] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 46.972726] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 46.980695] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 46.988376] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 46.994751] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 47.010891] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 47.016961] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 47.024757] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 47.455111] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 47.462057] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 47.469989] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 47.476371] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 47.484080] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 47.498229] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 47.503763] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 47.512096] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 47.946601] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 47.953547] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 47.961504] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 47.969206] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 47.975581] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 47.995623] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 48.003192] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 48.008537] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 48.442843] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 48.449775] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 48.456252] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 48.464191] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 48.471086] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 48.471113] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 48.472345] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 48.493809] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 48.678512] Freezing of user space aborted
[ 48.682870] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 48.682931] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 48.682958] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 48.694274] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 48.694290] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 48.694299] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 48.694307] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 48.732298] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 49.048964] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 49.048974] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 49.048984] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 49.049023] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 49.049031] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 49.058174] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 49.058186] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 49.098430] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 49.400120] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 49.400567] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 49.400586] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 49.400641] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 49.400653] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 49.400697] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 49.400705] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 49.449595] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 50.685471] qcom,qpnp-charger:qpnp_chg_iusbmax_set: bad mA=0 asked to set
[ 50.838034] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 50.845014] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 50.852934] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 50.860660] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 50.868356] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 50.882207] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 50.887969] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 50.896264] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 51.790928] dsi_panel_handler enable=1
[ 52.024818] ------------[ cut here ]------------
[ 52.028567] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[ 52.038017] Unbalanced enable for IRQ 330
[ 52.042178] ---[ end trace be0e6727fdadba65 ]---
[ 72.206221] dsi_panel_handler enable=0
[ 92.788875] SysRq : Emergency Remount R/O
[ 92.899262] Restarting system with command 'bootloader'.
[ 92.903613] Going down for restart now
[ 92.908879] Calling SCM to disable SPMI PMIC餉ndroid Bootloader - UART_DM Initialized!!!
[0] welcome to lk
[10] platform_init()
[10] target_init()
[30] Done initialization of the card
[130] Config MIPI_VIDEO_PANEL.
[130] mdss_dsi_panel_initialize: wxun: mipi_dsi.c--lane_swap=1
[140] mipi_panel_auto_detect:start
[150] otm9605A_read_reg_single: wxun, mipi_tianma_otm9605a_video_qhd.c reg=0xd202
[150] mipi_panel_auto_detect_otm9605A: lcdid=0x9605.
[160] mipi_tianma_otm9605A_panel_video_qhd_reinit: start
[160] mdss_dsi_config_reinit: lctlc: mipi_dsi.c
[330] Turn on MIPI_VIDEO_PANEL.
[340] Video lane tested successfully
[570] Backlight enable=1 failed
[570] pm8x41_get_is_cold_boot: Warm boot
[570] target_pause_for_battery_charge : pon_reason is 128 cold_boot:0
[580] fastboot_init()
[580] Loading keystore failed status 2 [610] USB init ept @ 0x7a43000
[630] udc_start()
[740] -- reset --
[750] -- portchange --
[970] -- reset --
[970] -- portchange --
[1240] fastboot: processing commands
[10050] fastboot: getvar:partition-type:boot
[10050] fastboot: getvar:max-download-size
[10090] fastboot: download:0078d000
[10350] fastboot: flash:boot
[20590] fastboot: reboot
[20610] rebooting the 銩ndroid Bootloader - UART_DM Initialized!!!
[0] welcome to lk
[10] platform_init()
[10] target_init()
[30] Done initialization of the card
[130] Config MIPI_VIDEO_PANEL.
[140] mdss_dsi_panel_initialize: wxun: mipi_dsi.c--lane_swap=1
[140] mipi_panel_auto_detect:start
[150] otm9605A_read_reg_single: wxun, mipi_tianma_otm9605a_video_qhd.c reg=0xd202
[160] mipi_panel_auto_detect_otm9605A: lcdid=0x9605.
[160] mipi_tianma_otm9605A_panel_video_qhd_reinit: start
[170] mdss_dsi_config_reinit: lctlc: mipi_dsi.c
[330] Turn on MIPI_VIDEO_PANEL.
[340] Video lane tested successfully
[570] Backlight enable=1 failed
[570] pm8x41_get_is_cold_boot: Warm boot
[570] target_pause_for_battery_charge : pon_reason is 128 cold_boot:0
[580] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
[590] Loading boot image (6490112): start
[660] Loading boot image (6490112): done
[670] ERROR: Unable to find suitable device tree for device (165/0x00010001/11/0)
[680] Using DTB entry 165/00010001/11/0 for device 165/00010001/11/0
[690] pm8x41_get_is_cold_boot: Warm boot
[690] target_pause_for_battery_charge : pon_reason is 128 cold_boot:0
[700] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_vid[720] Updating device tree: start
[830] Updating device tree: done
[840] booting linux @ 0x8000, ramdisk @ 0x2000000 (459525), tags/device tree @ 0x1e00000
[840] Turn off MIPI_VIDEO_PANEL.
[840] Continuous splash enabled, keeping panel alive.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-g8218128-00704-g42fcf2d-dirty (xxx@soft111) (gcc version 4.7 (GCC) ) #6 SMP PREEMPT Mon Dec 30 22:04:11 CST 2013
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Qualcomm MSM 8610 (Flattened Device Tree), model: Qualcomm MSM 8610v2 QRD SKUAA
[ 0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-3a00000
[ 0.000000] Node qcom,msm-mem-hole removed memory 8800000-de00000
[ 0.000000] qcom,msm-rtb reserved EBI1 size 100000
[ 0.000000] memory pool 3 (start 0x1ff00000 size 100000) initialized
[ 0.000000] cma: CMA: reserved 16 MiB at 1ec00000
[ 0.000000] cma: Found qsecom_region, memory base 0, size 1 MiB
[ 0.000000] cma: CMA: reserved 4 MiB at 1e800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] IMEM DT static mapping successful
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c15c8000 s15872 r8192 d12800 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 107648
[ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_video lcm.id=0x9605
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 136MB 289MB = 425MB total
[ 0.000000] Memory: 384792k/384792k available, 51432k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xcde00000 - 0xe0000000 ( 290 MB)
[ 0.000000] vmalloc : 0xc8800000 - 0xcde00000 ( 86 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8800000 ( 136 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0c4f448 (12574 kB)
[ 0.000000] .init : 0xc0d00000 - 0xc0e12e00 (1100 kB)
[ 0.000000] .data : 0xc0e14000 - 0xc0efa3c8 ( 921 kB)
[ 0.000000] .bss : 0xc0efa3ec - 0xc1114a00 (2154 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] Console: colour dummy device 80x30
[ 0.000180] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000205] pid_max: default: 32768 minimum: 301
[ 0.000482] Security Framework initialized
[ 0.000534] SELinux: Initializing.
[ 0.000686] Mount-cache hash table entries: 512
[ 0.001976] Initializing cgroup subsys debug
[ 0.001993] Initializing cgroup subsys cpuacct
[ 0.002004] Initializing cgroup subsys freezer
[ 0.002059] CPU: Testing write buffer coherency: ok
[ 0.002546] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002636] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[ 0.005150] Setting up static identity map for 0x8a4c30 - 0x8a4c94
[ 0.005188] Configuring XPU violations to be fatal errors
[ 0.005201] MSM Memory Dump table set up
[ 0.012592] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.018908] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.025239] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.025348] Brought up 4 CPUs
[ 0.025367] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.039680] dummy:
[ 0.056251] NET: Registered protocol family 16
[ 0.068808] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.070941] KPI: Bootloader start count = 21001
[ 0.070954] KPI: Bootloader end count = 49075
[ 0.070964] KPI: Bootloader display count = 31844
[ 0.070974] KPI: Bootloader load kernel count = 2449
[ 0.070986] KPI: Kernel MPM timestamp = 76987
[ 0.070996] KPI: Kernel MPM Clock frequency = 32768
[ 0.071019] socinfo_print: v8, id=165, ver=1.1, raw_id=2069, raw_ver=1, hw_plat=11, hw_plat_ver=196608
[ 0.071028] accessory_chip=0, hw_plat_subtype=0, pmic_model=65541, pmic_die_revision=131072
[ 0.085787] gpiochip_add: registered GPIOs 0 to 101 on device: msmgpio
[ 0.090631] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
[ 0.121072] 8110_s1: 500 <--> 1275 mV at 0 mV normal idle
[ 0.121758] 8110_s1_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.122435] 8110_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
[ 0.123097] 8110_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.123801] 8110_s3: 1200 <--> 1350 mV at 1200 mV normal idle
[ 0.124498] 8110_s4: 1800 <--> 2150 mV at 2150 mV normal idle
[ 0.125200] 8110_l1: 1225 mV normal idle
[ 0.125917] 8110_l2: 1200 mV normal idle
[ 0.126588] 8110_l3: 750 <--> 1275 mV at 0 mV normal idle
[ 0.127186] 8110_l3_ao: 750 <--> 1275 mV at 0 mV normal idle
[ 0.127824] 8110_l3_so: 750 <--> 1275 mV at 750 mV normal idle
[ 0.128809] 8110_l4: 1200 mV normal idle
[ 0.129467] 8110_l5: 1300 <--> 1350 mV at 1300 mV normal idle
[ 0.130144] 8110_l6: 1800 mV normal idle
[ 0.130836] 8110_l7: 2050 mV normal idle
[ 0.131539] 8110_l8: 1800 mV normal idle
[ 0.132209] 8110_l9: 2050 mV normal idle
[ 0.132883] 8110_l10: 1800 mV normal idle
[ 0.133576] 8110_l10_ao: 1800 mV normal idle
[ 0.134224] 8110_l10_so: 1800 mV normal idle
[ 0.134870] 8110_l12: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.135883] 8110_l14: 1800 mV normal idle
[ 0.136592] 8110_l15: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.137259] 8110_l16: 3000 <--> 3350 mV at 3000 mV normal idle
[ 0.137938] 8110_l17: 2900 mV normal idle
[ 0.138646] 8110_l18: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.139311] 8110_l19: 2850 mV normal idle
[ 0.140012] 8110_l20: 3075 mV normal idle
[ 0.140702] 8110_l21: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.141373] 8110_l22: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.143013] msm-thermal qcom,msm-thermal.51: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. KTM continues
[ 0.143392] vdd_restriction_reg_init:Defer vdd rstr freq init
[ 0.169055] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.169074] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.169782] msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized
[ 0.171811] 8110_s2: 900 <--> 1275 mV at 1150 mV
[ 0.172069] spm_regulator_probe: name=8110_s2, range=LV, voltage=1150000 uV, mode=AUTO, step rate=9600 uV/us
[ 0.173521] cpr_efuse_init: efuse_addr = 0xfc4b8000 (len=0x1000)
[ 0.173564] cpr_voltage_plan_init: [1] [1150000 1150000 1275000] uV
[ 0.173579] cpr_voltage_plan_init: [2] [1075000 1075000 1275000] uV
[ 0.173594] cpr_voltage_plan_init: [3] [1050000 1050000 1275000] uV
[ 0.173658] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[ 0.173703] cpr_pvs_init: [row:23] = 0xA0128513000002E0, n_bits=5, bin=11 (3)
[ 0.173717] cpr_pvs_init: pvs initial turbo voltage_= from 1275000 to 1275000
[ 0.174079] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[ 0.174131] cpr_init_cpr_efuse: [row:61] = 0x1250f115d9da8
[ 0.174151] cpr_init_cpr_efuse: disable = 0, local = 1
[ 0.174165] cpr_init_cpr_efuse: Corner[1]: ro_sel = 2, target quot = 482
[ 0.174179] cpr_init_cpr_efuse: Corner[2]: ro_sel = 2, target quot = 699
[ 0.174192] cpr_init_cpr_efuse: Corner[3]: ro_sel = 2, target quot = 949
[ 0.174248] cpr_init_cpr_parameters: CPR is enabled by default.
[ 0.174269] cpr_config: Timer count: 0x17700 (for 5000 us)
[ 0.174601] apc_corner: 0 <--> 0 mV
[ 0.177276] qup_i2c f9923000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.178542] kworker/u:1 used greatest stack depth: 6144 bytes left
[ 0.180308] qup_i2c f9927000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.182349] qup_i2c f9928000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.184665] qup_i2c f9925000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.188529] sps:sps is ready.
[ 0.190255] gdsc_vfe:
[ 0.190699] gdsc_oxili_cx:
[ 0.191332] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[ 0.192683] msm_bus_fabric fc478000.msm-mmss-noc: msmbus_coresight initialized
[ 0.193797] msm_bus_fabric fc460000.msm-sys-noc: msmbus_coresight initialized
[ 0.194671] msm_bus_fabric fc468000.msm-periph-noc: msmbus_coresight initialized
[ 0.196180] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 5120
[ 0.196906] msm_bus_fabric fc380000.msm-bimc: msmbus_coresight initialized
[ 0.229011] bio: create slab <bio-0> at 0
[ 0.230230] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
[ 0.230832] ION heap vmalloc created
[ 0.230993] ION heap kmalloc created
[ 0.231056] ION heap iommu created
[ 0.231085] ION heap qsecom created
[ 0.231121] ION heap pil_1 created at 0x0c500000 with size 1300000
[ 0.231167] ION heap pil_2 created at 0x08800000 with size 3d00000
[ 0.232599] Linux media interface: v0.10
[ 0.232691] Linux video capture interface: v2.00
[ 0.234408] msm_iommu_dev_v0: lpass_iommu enabled remote spinlock
[ 0.235573] msm_iommu_dev_v0: device lpass_iommu mapped at c88e0000, with 4 ctx banks
[ 0.237927] msm_iommu_dev_v0: device copss_iommu mapped at c8960000, with 8 ctx banks
[ 0.238717] msm_iommu_dev_v0: device mdpe_iommu mapped at c8b20000, with 2 ctx banks
[ 0.239432] msm_iommu_dev_v0: device mdps_iommu mapped at c8b40000, with 2 ctx banks
[ 0.240438] msm_iommu_dev_v0: device gfx_iommu mapped at c8b60000, with 3 ctx banks
[ 0.240884] msm_iommu_dev_v0: device vfe_iommu mapped at c8b80000, with 1 ctx banks
[ 0.242106] msm_iommu_ctx fd000000.qcom,iommu-ctx: context q6_fw using bank 0
[ 0.242294] msm_iommu_ctx fd001000.qcom,iommu-ctx: context audio_shared using bank 1
[ 0.242474] msm_iommu_ctx fd002000.qcom,iommu-ctx: context video_shared using bank 2
[ 0.242704] msm_iommu_ctx fd003000.qcom,iommu-ctx: context q6_spare using bank 3
[ 0.242917] msm_iommu_ctx fd010000.qcom,iommu-ctx: context copss_0 using bank 0
[ 0.243101] msm_iommu_ctx fd011000.qcom,iommu-ctx: context copss_1 using bank 1
[ 0.243467] msm_iommu_ctx fd012000.qcom,iommu-ctx: context copss_2 using bank 2
[ 0.243882] msm_iommu_ctx fd013000.qcom,iommu-ctx: context copss_3 using bank 3
[ 0.244073] msm_iommu_ctx fd014000.qcom,iommu-ctx: context copss_4 using bank 4
[ 0.244256] msm_iommu_ctx fd015000.qcom,iommu-ctx: context copss_5 using bank 5
[ 0.244508] msm_iommu_ctx fd016000.qcom,iommu-ctx: context copss_6 using bank 6
[ 0.244693] msm_iommu_ctx fd017000.qcom,iommu-ctx: context copss_7 using bank 7
[ 0.244936] msm_iommu_ctx fd860000.qcom,iommu-ctx: context mdpe_0 using bank 0
[ 0.245121] msm_iommu_ctx fd861000.qcom,iommu-ctx: context mdpe_1 using bank 1
[ 0.245334] msm_iommu_ctx fd870000.qcom,iommu-ctx: context mdps_0 using bank 0
[ 0.245519] msm_iommu_ctx fd871000.qcom,iommu-ctx: context mdps_1 using bank 1
[ 0.245846] msm_iommu_ctx fd880000.qcom,iommu-ctx: context gfx3d_user using bank 0
[ 0.246129] msm_iommu_ctx fd881000.qcom,iommu-ctx: context gfx3d_priv using bank 1
[ 0.246320] msm_iommu_ctx fd882000.qcom,iommu-ctx: context gfx3d_spare using bank 2
[ 0.246588] msm_iommu_ctx fd890000.qcom,iommu-ctx: context vfe0 using bank 0
[ 0.246767] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.247626] Bluetooth: Core ver 2.16
[ 0.247700] NET: Registered protocol family 31
[ 0.247711] Bluetooth: HCI device and connection manager initialized
[ 0.247727] Bluetooth: HCI socket layer initialized
[ 0.247740] Bluetooth: L2CAP socket layer initialized
[ 0.248059] Bluetooth: SCO socket layer initialized
[ 0.248493] cfg80211: Calling CRDA to update world regulatory domain
[ 0.248544] cfg80211: World regulatory domain updated:
[ 0.248557] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.248574] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.248590] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.248606] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 0.248621] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.248637] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.249299] Switching to clocksource arch_sys_counter
[ 0.302627] NET: Registered protocol family 2
[ 0.303111] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.304550] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.307847] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[ 0.308287] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.308300] TCP: reno registered
[ 0.308416] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.308546] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.308990] NET: Registered protocol family 1
[ 0.309640] Trying to unpack rootfs image as initramfs...
[ 0.352781] Freeing initrd memory: 448K
[ 0.358329] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
[ 0.359345] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
[ 0.359625] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
[ 0.360638] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
[ 0.360843] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
[ 0.361876] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
[ 0.362119] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
[ 0.363191] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
[ 0.363395] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
[ 0.364460] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
[ 0.364702] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
[ 0.365793] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
[ 0.366010] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
[ 0.367133] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
[ 0.368764] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
[ 0.373643] pil_pronto fb21b000.qcom,pronto: using secure boot
[ 0.382838] NET: Registered protocol family 27
[ 0.385476] platform qcom,msm-audio-ion.30: Driver msm-audio-ion requests probe deferral
[ 0.390668] find_cur_cpu_level: CPUs are running at an unknown rate. Defaulting to 1190400 KHz.
[ 0.390969] cpufreq_table_init: CPU: 6 scaling frequencies supported.
[ 0.392197] msm_rpmrbcpr_memalloc: Invalid num corners 4, num recmnds 3
[ 0.392229] msm_rpmrbcpr_stats: probe of fc000000.qcom,rpm-rbcpr-stats failed with error -14
[ 0.392622] msm_rpm_log_probe: OK
[ 0.404772] audit: initializing netlink socket (disabled)
[ 0.404824] type=2000 audit(0.390:1): initialized
[ 0.522525] fuse init (API version 7.18)
[ 0.523014] msgmni has been set to 792
[ 0.525131] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.525144] io scheduler noop registered
[ 0.525152] io scheduler deadline registered
[ 0.525171] io scheduler row registered
[ 0.525336] io scheduler cfq registered (default)
[ 0.525344] io scheduler test-iosched registered
[ 0.525627] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc0 incorrect owner 2
[ 0.525716] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc1 incorrect owner 5
[ 0.525806] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc2 incorrect owner 4
[ 0.525886] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc3 incorrect owner 2
[ 0.526018] gpiochip_add: registered GPIOs 572 to 575 on device: pm8110-gpio
[ 0.526338] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa3 incorrect owner 2
[ 0.526461] gpiochip_add: registered GPIOs 570 to 571 on device: pm8110-mpp
[ 0.528532] mdss_dsi_panel_init: Panel Name = TIANMA OTM9605A QHD video mode dsi panel
[ 0.528761] mdss_dsi_panel_init:977 Continuous splash flag enabled.
[ 0.528771] mdss_dsi_panel_init:989 Partial update disabled.
[ 0.528829] dsi_parse_gpio:156, Disp_en gpio not specified
[ 0.529310] mdss_register_panel: adding framebuffer device fdd00000.qcom,mdss_dsi
[ 0.561661] mdss_fb_register: FrameBuffer[0] 540x960 size=0 registered successfully!
[ 0.602816] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
[ 0.602838] AXI: get_pdata(): Error: Client name not found
[ 0.602846] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[ 0.602854] msm_serial_hsl_probe: Bus scaling is disabled
[ 0.602984] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
[ 0.603047] msm_hsl_console_setup: console setup on port #0
[ 2.163597] console [ttyHSL0] enabled
[ 2.167620] msm_serial_hsl_init: driver initialized
[ 2.176085] diagchar initialized now
[ 2.181039] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
[ 2.197834] brd: module loaded
[ 2.203622] loop: module loaded
[ 2.206156] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
[ 2.210613] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
[ 2.216136] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x0
[ 2.221771] QSEECOM: qseecom_probe: secure app region addr=0xda00000 size=0x100000
[ 2.229880] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[ 2.236188] i2c-core: driver [tabla-i2c-core] using legacy resume method
[ 2.243052] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[ 2.249839] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[ 2.257202] sps: BAM device 0xf9904000 is not registered yet.
[ 2.262440] sps:BAM 0xf9904000 is registered.
[ 2.266877] sps:BAM 0xf9904000 (va:0xc8be0000) enabled: ver:0x15, number of pipes:24
[ 2.274911] spi_qsd f9926000.spi: master is unqueued, this is deprecated
[ 2.282286] tun: Universal TUN/TAP device driver, 1.6
[ 2.286294] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 2.292576] rmnet_init: BAM devices[9]
[ 2.304482] PPP generic driver version 2.4.2
[ 2.307859] PPP BSD Compression module registered
[ 2.312434] PPP Deflate Compression module registered
[ 2.318213] PPP MPPE Compression module registered
[ 2.322233] NET: Registered protocol family 24
[ 2.326950] wcnss_wlan probed in built-in mode
[ 2.333389] msm_otg f9a55000.usb: msm_otg probe
[ 2.337331] msm_otg f9a55000.usb: OTG regs = c8942000
[ 2.344876] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
[ 2.349810] msm_otg f9a55000.usb: phy_reset: success
[ 2.355383] mbim_init: initialize 1 instances
[ 2.359151] mbim_init: Initialized 1 ports
[ 2.365124] rndis_qc_init: initialize rndis QC instance
[ 2.369991] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.376163] android_usb gadget: Number of LUNs=3
[ 2.380796] lun0: LUN: removable file: (no medium)
[ 2.385627] lun1: LUN: removable read only CD-ROM file: (no medium)
[ 2.391984] lun2: LUN: removable file: (no medium)
[ 2.397153] android_usb gadget: android_usb ready
[ 2.402968] [himax] himax_ts_init
[ 2.405283] wxun: himax_ts_probe: irq set here
[ 2.409865] [HIMAX PORTING MSG]himax_ts_probe ts->client->irq =330
[ 2.415919] wxun: himax_ts_probe: reset set here
[ 2.420627] ------------[ cut here ]------------
[ 2.425216] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[ 2.435881] autorequest GPIO-0
[ 2.438918] Modules linked in:
[ 2.441975] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[ 2.451427] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[ 2.460975] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[ 2.470612] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[ 2.480682] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c05355c8>] (himax_ts_probe+0x174/0xc64)
[ 2.490315] [<c05355c8>] (himax_ts_probe+0x174/0xc64) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[ 2.499431] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[ 2.508891] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[ 2.518268] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[ 2.527293] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[ 2.536321] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[ 2.545350] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[ 2.554725] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[ 2.564187] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[ 2.573042] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[ 2.581824] ---[ end trace 8ecd75e0473f590c ]---
[ 2.909852] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 2.915787] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[ 2.939513] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 2.945444] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[ 2.969511] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 2.975443] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[ 2.999382] [TP] i2c_himax_read: i2c_read_block retry over 3
[ 3.003996] himax_ts_probe other driver has been loaded
[ 3.009288] msg26xx: msg26xx_ts_init
[ 3.012823] msg26xx: TPD probe
[ 3.015801] ------------[ cut here ]------------
[ 3.020408] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[ 3.031078] autorequest GPIO-0
[ 3.034116] Modules linked in:
[ 3.037165] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[ 3.046624] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[ 3.056174] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[ 3.065809] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[ 3.075878] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c0538984>] (tpd_probe+0x3c/0x748)
[ 3.084992] [<c0538984>] (tpd_probe+0x3c/0x748) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[ 3.093586] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[ 3.103047] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[ 3.112424] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[ 3.121451] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[ 3.130477] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[ 3.139506] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[ 3.148882] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[ 3.158342] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[ 3.167198] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[ 3.175959] ---[ end trace 8ecd75e0473f590d ]---
[ 3.519518] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 3.525450] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[ 3.531725] _msg_WriteI2CSeq error -107,addr = 38
[ 3.536373] msg26xx: _msg_GetVersion ret = -107
[ 3.569512] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 3.575443] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[ 3.581717] _msg_WriteI2CSeq error -107,addr = 38
[ 3.586367] msg26xx: _msg_GetVersion ret = -107
[ 3.619511] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 3.625442] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[ 3.631715] _msg_WriteI2CSeq error -107,addr = 38
[ 3.636365] msg26xx: _msg_GetVersion ret = -107
[ 3.669380] msg26xx: may be there is not msg26xx tp
[ 3.673313] msg26xx: probe of 1-0026 failed with error 19
[ 3.678772] FTS: ft5x0x_ts_probe enter
[ 3.682491] FTS: irq = 330
[ 4.110268] FTS: --------ft5x0x_read_version---------fwversion=b,module=5d
[ 4.116726] input: ft5x0x_ts as /devices/virtual/input/input0
[ 4.279530] ft5x0x_ts 1-0038: Create proc entry success!
[ 4.284248] FTS: Firmware version = 0xb
[ 4.288146] FTS: report rate is 100Hz.
[ 4.291989] FTS: touch threshold is 48.
[ 4.295643] input: proximity as /devices/f9923000.i2c/i2c-1/1-0038/input/input1
[ 4.302849] FTS: tp_prox_setup_polled_device, err=0, poll-interval=100
[ 4.309294] Successfully added driver ft5x0x_ts
[ 4.313770] ctp_selftest_init
[ 4.316784] create_proc_entry g_ctp_selftest_proc success
[ 4.322101] ctp_upgrade_init
[ 4.325019] [elan] create_proc_entry 222 success
[ 4.329574] create_proc_entry success
[ 4.333190] ctp_if_upgrade_init
[ 4.336394] ctp_if_upgrade_init create_proc_entry 222 success
[ 4.342073] create_proc_entry success
[ 4.345696] create_proc_entry success
[ 4.349410] bma2x2_probe:
[ 4.379929] bma2x2_probe: chipid=20f8
[ 4.382765] input: accelerometer as /devices/f9925000.i2c/i2c-0/0-0018/input/input2
[ 4.390317] bma2x2_disable,start
[ 4.394103] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2157, h:m:s == 0:35:57, d/m/y = 1/0/70
[ 4.401687] qcom,qpnp-rtc qpnp-rtc-de519800: Alarm set for - h:r:s=0:0:0, d/m/y=1/0/70
[ 4.409592] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2157, h:m:s == 0:35:57, d/m/y = 1/0/70
[ 4.418100] using rtc device, qpnp_rtc, for alarms
[ 4.422431] qcom,qpnp-rtc qpnp-rtc-de519800: rtc core: registered qpnp_rtc as rtc0
[ 4.430315] qcom,qpnp-rtc qpnp-rtc-de519800: Probe success !!
[ 4.435885] i2c /dev entries driver
[ 4.445703] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[ 4.451531] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[ 4.458497] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[ 4.465170] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[ 4.472614] s5k4e1_init_module:153
[ 4.475676] s5k4e1_init_module:158 rc -19
[ 4.480216] zgc2235_init_module:141
[ 4.483136] zgc2235_init_module:146 rc -19
[ 4.486900] msm_sensor_i2c_probe gc2235_i2c_probe called
[ 4.492182] msm_sensor_i2c_probe: of_node exisists
[ 4.496766] msm_sensor_get_dt_data qcom,sensor-name gc2235, rc 0
[ 4.502948] msm_sensor_get_dt_data qcom,sensor-mode 0, rc 0
[ 4.508481] msm_sensor_get_dt_data qcom,sensor-position 1, rc 0
[ 4.514402] msm_sensor_get_dt_data qcom,mount-angle 270, rc 0
[ 4.520132] msm_sensor_get_dt_data qcom,cci-master 0, rc 0
[ 4.525583] msm_sensor_get_sub_module_index:75 src_node NULL
[ 4.531244] msm_sensor_get_sub_module_index:92 eeprom src_node NULL
[ 4.537491] msm_sensor_get_sub_module_index qcom,led flash cell index 1, rc 0
[ 4.544617] msm_sensor_get_sub_module_index csiphy_core[0] = 1
[ 4.550429] msm_sensor_get_sub_module_index csid_core[0] = 1
[ 4.556053] msm_sensor_get_dt_csi_data qcom,csi-lane-assign e4, rc 0
[ 4.562407] msm_sensor_get_dt_csi_data qcom,csi-lane-mask 3, rc 0
[ 4.568464] msm_sensor_get_dt_vreg_data qcom,cam-vreg-name count 3
[ 4.574647] msm_sensor_get_dt_vreg_data reg_name[0] = cam_vdig
[ 4.580462] msm_sensor_get_dt_vreg_data reg_name[1] = cam_vio
[ 4.586172] msm_sensor_get_dt_vreg_data reg_name[2] = cam_vana
[ 4.592008] msm_sensor_get_dt_vreg_data cam_vreg[0].type = 0
[ 4.597629] msm_sensor_get_dt_vreg_data cam_vreg[1].type = 0
[ 4.603291] msm_sensor_get_dt_vreg_data cam_vreg[2].type = 0
[ 4.608915] msm_sensor_get_dt_vreg_data cam_vreg[0].min_voltage = 1800000
[ 4.615703] msm_sensor_get_dt_vreg_data cam_vreg[1].min_voltage = 1800000
[ 4.622474] msm_sensor_get_dt_vreg_data cam_vreg[2].min_voltage = 2850000
[ 4.629227] msm_sensor_get_dt_vreg_data cam_vreg[0].max_voltage = 1800000
[ 4.636017] msm_sensor_get_dt_vreg_data cam_vreg[1].max_voltage = 1800000
[ 4.642787] msm_sensor_get_dt_vreg_data cam_vreg[2].max_voltage = 2850000
[ 4.649560] msm_sensor_get_dt_vreg_data cam_vreg[0].op_mode = 200000
[ 4.655876] msm_sensor_get_dt_vreg_data cam_vreg[1].op_mode = 200000
[ 4.662231] msm_sensor_get_dt_vreg_data cam_vreg[2].op_mode = 80000
[ 4.668497] msm_sensor_get_dt_data gpio count 3
[ 4.673006] msm_sensor_get_dt_data gpio_array[0] = 13
[ 4.678018] msm_sensor_get_dt_data gpio_array[1] = 15
[ 4.683118] msm_sensor_get_dt_data gpio_array[2] = 85
[ 4.688087] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].gpio = 13
[ 4.694788] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].gpio = 15
[ 4.701468] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].gpio = 85
[ 4.708134] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].flags = 1
[ 4.714836] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].flags = 0
[ 4.721519] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].flags = 0
[ 4.728187] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].label = CAMIF_MCLK
[ 4.735671] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].label = CAM_RESET
[ 4.743049] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].label = CAM_STANDBY
[ 4.750606] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 15
[ 4.756138] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 85
[ 4.761721] msm_sensor_get_dt_actuator_data qcom,actuator-cam-name 0, rc -22
[ 4.768727] msm_sensor_get_dt_data qcom,misc_regulator (null), rc -22
[ 4.775168] msm_sensor_power_up:991
[ 4.778635] msm_sensor_power_up index 0
[ 4.782458] msm_sensor_power_up type 2
[ 4.797563] msm_sensor_power_up index 1
[ 4.800376] msm_sensor_power_up type 2
[ 4.815436] msm_sensor_power_up index 2
[ 4.818226] msm_sensor_power_up type 2
[ 4.833250] msm_sensor_power_up index 3
[ 4.836041] msm_sensor_power_up type 0
[ 4.845846] msm_sensor_power_up index 4
[ 4.848637] msm_sensor_power_up type 1
[ 4.899383] msm_sensor_power_up index 5
[ 4.902174] msm_sensor_power_up type 1
[ 4.949382] msm_sensor_power_up index 6
[ 4.952172] msm_sensor_power_up type 1
[ 4.999382] msm_sensor_power_up index 7
[ 5.002172] msm_sensor_power_up type 1
[ 5.049397] msm_sensor_power_up index 8
[ 5.052188] msm_sensor_power_up type 3
[ 5.056172] qup_i2c f9928000.i2c: QUP: I2C status flags :0xc1343c8, irq:132
[ 5.062885] qup_i2c f9928000.i2c: I2C slave addr:0x21 not connected
[ 5.069133] msm_sensor_match_id: gc2235: read id failed
[ 5.074347] msm_sensor_power_up:1095 match id failed rc -107
[ 5.079985] msm_sensor_power_up:1102 failed
[ 5.084133] msm_sensor_power_up index 8
[ 5.087952] msm_sensor_power_up type 3
[ 5.091703] msm_sensor_power_up index 7
[ 5.095503] msm_sensor_power_up type 1
[ 5.139384] msm_sensor_power_up index 6
[ 5.142175] msm_sensor_power_up type 1
[ 5.189378] msm_sensor_power_up index 5
[ 5.192168] msm_sensor_power_up type 1
[ 5.239382] msm_sensor_power_up index 4
[ 5.242173] msm_sensor_power_up type 1
[ 5.289461] msm_sensor_power_up index 3
[ 5.292250] msm_sensor_power_up type 0
[ 5.302017] msm_sensor_power_up index 2
[ 5.304808] msm_sensor_power_up type 2
[ 5.319804] msm_sensor_power_up index 1
[ 5.322596] msm_sensor_power_up type 2
[ 5.337616] msm_sensor_power_up index 0
[ 5.340430] msm_sensor_power_up type 2
[ 5.355437] msm_sensor_i2c_probe gc2235 power up failed
[ 5.359649] gc2235: probe of 6-0078 failed with error -107
[ 5.365131] sp0a28_init_module:604
[ 5.368871] sp0a28_init_module:609 rc -19
[ 5.372525] msm_sp0a28_i2c_probe, E.
[ 5.375937] msm_sensor_i2c_probe sp0a28_i2c_probe called
[ 5.381426] msm_sensor_i2c_probe: of_node exisists
[ 5.386010] msm_sensor_get_dt_data qcom,sensor-name sp0a28, rc 0
[ 5.392192] msm_sensor_get_dt_data qcom,sensor-mode 0, rc 0
[ 5.397727] msm_sensor_get_dt_data qcom,sensor-position 1, rc 0
[ 5.403648] msm_sensor_get_dt_data qcom,mount-angle 90, rc 0
[ 5.409273] msm_sensor_get_dt_data qcom,cci-master 0, rc 0
[ 5.414772] msm_sensor_get_sub_module_index:75 src_node NULL
[ 5.420403] msm_sensor_get_sub_module_index:92 eeprom src_node NULL
[ 5.426635] msm_sensor_get_sub_module_index:121 src_node NULL
[ 5.432415] msm_sensor_get_sub_module_index csiphy_core[0] = 1
[ 5.438181] msm_sensor_get_sub_module_index csid_core[0] = 1
[ 5.443844] msm_sensor_get_dt_csi_data qcom,csi-lane-assign e4, rc 0
[ 5.450178] msm_sensor_get_dt_csi_data qcom,csi-lane-mask 3, rc 0
[ 5.456234] msm_sensor_get_dt_vreg_data qcom,cam-vreg-name count 3
[ 5.462417] msm_sensor_get_dt_vreg_data reg_name[0] = cam_vdig
[ 5.468213] msm_sensor_get_dt_vreg_data reg_name[1] = cam_vio
[ 5.473962] msm_sensor_get_dt_vreg_data reg_name[2] = cam_vana
[ 5.479778] msm_sensor_get_dt_vreg_data cam_vreg[0].type = 0
[ 5.485400] msm_sensor_get_dt_vreg_data cam_vreg[1].type = 0
[ 5.491061] msm_sensor_get_dt_vreg_data cam_vreg[2].type = 0
[ 5.496685] msm_sensor_get_dt_vreg_data cam_vreg[0].min_voltage = 2850000
[ 5.503474] msm_sensor_get_dt_vreg_data cam_vreg[1].min_voltage = 1800000
[ 5.510245] msm_sensor_get_dt_vreg_data cam_vreg[2].min_voltage = 2850000
[ 5.516998] msm_sensor_get_dt_vreg_data cam_vreg[0].max_voltage = 2850000
[ 5.523786] msm_sensor_get_dt_vreg_data cam_vreg[1].max_voltage = 1800000
[ 5.530558] msm_sensor_get_dt_vreg_data cam_vreg[2].max_voltage = 2850000
[ 5.537312] msm_sensor_get_dt_vreg_data cam_vreg[0].op_mode = 200000
[ 5.543666] msm_sensor_get_dt_vreg_data cam_vreg[1].op_mode = 200000
[ 5.550002] msm_sensor_get_dt_vreg_data cam_vreg[2].op_mode = 80000
[ 5.556271] msm_sensor_get_dt_data gpio count 3
[ 5.560774] msm_sensor_get_dt_data gpio_array[0] = 13
[ 5.565790] msm_sensor_get_dt_data gpio_array[1] = 15
[ 5.570849] msm_sensor_get_dt_data gpio_array[2] = 85
[ 5.575856] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].gpio = 13
[ 5.582556] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].gpio = 15
[ 5.589219] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].gpio = 85
[ 5.595924] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].flags = 1
[ 5.602606] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].flags = 0
[ 5.609271] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].flags = 0
[ 5.615977] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].label = CAMIF_MCLK
[ 5.623441] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].label = CAM_RESET
[ 5.630819] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].label = CAM_STANDBY
[ 5.638356] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 15
[ 5.643929] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 85
[ 5.649490] msm_sensor_get_dt_actuator_data qcom,actuator-cam-name 0, rc -22
[ 5.656497] msm_sensor_get_dt_data qcom,misc_regulator (null), rc -22
[ 5.662937] msm_sensor_power_up:991
[ 5.666403] msm_sensor_power_up index 0
[ 5.670228] msm_sensor_power_up type 2
[ 5.679403] msm_sensor_power_up index 1
[ 5.682194] msm_sensor_power_up type 2
[ 5.692267] msm_sensor_power_up index 2
[ 5.695058] msm_sensor_power_up type 2
[ 5.698873] 8110_l14: requested voltage range [2850000, 2850000] does not fit within constraints: [1800000, 1800000]
[ 5.709318] msm_camera_config_single_vreg: cam_vdig set voltage failed
[ 5.721895] msm_sensor_power_up index 3
[ 5.724685] msm_sensor_power_up type 0
[ 5.739466] msm_sensor_power_up index 4
[ 5.742257] msm_sensor_power_up type 1
[ 5.757011] msm_sensor_power_up index 5
[ 5.759822] msm_sensor_power_up type 1
[ 5.774557] msm_sensor_power_up index 6
[ 5.777347] msm_sensor_power_up type 1
[ 5.792121] msm_sensor_power_up index 7
[ 5.794911] msm_sensor_power_up type 3
[ 5.798645] sp0a28_match_id, E. calling i2c_read:, i2c_addr:122, id_reg_addr:2
[ 5.806230] sp0a28_match_id: read id: a2 ; expected id: 0xa2
[ 5.811685] msm_sensor_power_up exit
[ 5.815225] msm_sensor_i2c_probe sp0a28 probe succeeded
[ 5.820701] msm_sensor_i2c_probe rc 0 session_id 1
[ 5.825314] msm_sensor_i2c_probe:2087
[ 5.828865] s_ctrl->sensordata->camera_type = 1
[ 5.833390] msm_sensor_power_down:1161
[ 5.837099] msm_sensor_power_down index 7
[ 5.841112] msm_sensor_power_down type 3
[ 5.844998] msm_sensor_power_down index 6
[ 5.848991] msm_sensor_power_down type 1
[ 5.863939] msm_sensor_power_down index 5
[ 5.866903] msm_sensor_power_down type 1
[ 5.881853] msm_sensor_power_down index 4
[ 5.884816] msm_sensor_power_down type 1
[ 5.899744] msm_sensor_power_down index 3
[ 5.902708] msm_sensor_power_down type 0
[ 5.917645] msm_sensor_power_down index 2
[ 5.920629] msm_sensor_power_down type 2
[ 5.930534] msm_sensor_power_down index 1
[ 5.933499] msm_sensor_power_down type 2
[ 5.943698] msm_sensor_power_down index 0
[ 5.946662] msm_sensor_power_down type 2
[ 5.956839] msm_sensor_power_down exit
[ 5.962567] lirc_dev: IR Remote Control driver registered, major 241
[ 5.967965] IR NEC protocol handler initialized
[ 5.972509] IR RC5(x) protocol handler initialized
[ 5.977253] IR RC6 protocol handler initialized
[ 5.981785] IR JVC protocol handler initialized
[ 5.986280] IR Sony protocol handler initialized
[ 5.990900] IR RC5 (streamzap) protocol handler initialized
[ 5.996436] IR SANYO protocol handler initialized
[ 6.001143] IR MCE Keyboard/mouse protocol handler initialized
[ 6.006940] IR LIRC bridge handler initialized
[ 6.011932] BMS: qpnp_bms_init: QPNP BMS INIT
[ 6.015788] spmi qpnp-bms-de519600: Driver qcom,qpnp-bms requests probe deferral
[ 6.023264] spmi qpnp-charger-de518800: Driver qcom,qpnp-charger requests probe deferral
[ 6.068832] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 6.077438] cpuidle: using governor ladder
[ 6.081135] cpuidle: using governor menu
[ 6.084436] sdhci: Secure Digital Host Controller Interface driver
[ 6.090586] sdhci: Copyright(c) Pierre Ossman
[ 6.095372] sdhci-pltfm: SDHCI platform and OF driver helper
[ 6.100968] AXI: get_pdata(): Error: Client name not found
[ 6.106013] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[ 6.114627] mmc0: no vmmc regulator found
[ 6.119955] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
[ 6.125886] AXI: get_pdata(): Error: Client name not found
[ 6.131107] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[ 6.140325] mmc1: no vmmc regulator found
[ 6.145630] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
[ 6.153191] zram: Created 1 device(s) ...
[ 6.160864] ashmem: initialized
[ 6.163069] logger: created 256K log 'log_main'
[ 6.169621] logger: created 256K log 'log_events'
[ 6.175387] logger: created 256K log 'log_radio'
[ 6.181129] logger: created 256K log 'log_system'
[ 6.189474] sps:BAM 0xf9a44000 is registered.
[ 6.194641] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
[ 6.203190] PMIC@SID0 Power-on reason: Triggered from KPD (power key press) and 'warm' boot
[ 6.212794] input: qpnp_pon as /devices/virtual/input/input3
[ 6.220171] PMIC@SID0: PM8110 v2.0 options: 0, 0, 0, 0
[ 6.224559] coresight-fuse fc4be024.fuse: Fuse initialized
[ 6.230250] coresight-cti fc310000.cti: CTI initialized
[ 6.235100] coresight-cti fc311000.cti: CTI initialized
[ 6.240354] coresight-cti fc312000.cti: CTI initialized
[ 6.245496] coresight-cti fc313000.cti: CTI initialized
[ 6.250739] coresight-cti fc314000.cti: CTI initialized
[ 6.255943] coresight-cti fc315000.cti: CTI initialized
[ 6.261156] coresight-cti fc316000.cti: CTI initialized
[ 6.266329] coresight-cti fc317000.cti: CTI initialized
[ 6.271592] coresight-cti fc318000.cti: CTI initialized
[ 6.276779] coresight-cti fc351000.cti: CTI initialized
[ 6.282048] coresight-cti fc352000.cti: CTI initialized
[ 6.287200] coresight-cti fc353000.cti: CTI initialized
[ 6.292433] coresight-cti fc354000.cti: CTI initialized
[ 6.297589] coresight-cti fc335000.cti: CTI initialized
[ 6.302825] coresight-cti fc338000.cti: CTI initialized
[ 6.307898] mmc0: BKOPS_EN bit = 0
[ 6.308030] coresight-cti fc33c000.cti: CTI initialized
[ 6.308188] coresight-cti fc360000.cti: CTI initialized
[ 6.308661] coresight-csr fc301000.csr: CSR initialized
[ 6.329832] coresight-tmc fc326000.tmc: Byte Counter feature enabled
[ 6.335208] sps:BAM 0xfc37c000 is registered.
[ 6.339658] coresight-tmc fc326000.tmc: TMC initialized
[ 6.345150] coresight-tmc fc325000.tmc: TMC initialized
[ 6.350726] coresight-tpiu fc320000.tpiu: seta gpios not specified
[ 6.356091] coresight-tpiu fc320000.tpiu: setb gpios not specified
[ 6.362427] coresight-tpiu fc320000.tpiu: TPIU initialized
[ 6.368453] coresight-funnel fc323000.funnel: FUNNEL initialized
[ 6.373880] coresight-funnel fc321000.funnel: FUNNEL initialized
[ 6.379873] coresight-funnel fc322000.funnel: FUNNEL initialized
[ 6.385850] coresight-funnel fc355000.funnel: FUNNEL initialized
[ 6.391739] mmc0: new HS200 MMC card at address 0001
[ 6.392171] coresight-replicator fc324000.replicator: REPLICATOR initialized
[ 6.392796] coresight-stm fc302000.stm: STM initialized
[ 6.393308] coresight-hwevent fd820018.hwevent: Hardware Event driver initialized
[ 6.393997] coresight-etm fc34c000.etm: ETM initialized
[ 6.421810] coresight-etm fc34d000.etm: ETM initialized
[ 6.426873] mmcblk0: mmc0:0001 H4G1d 3.64 GiB
[ 6.427202] coresight-etm fc34e000.etm: ETM initialized
[ 6.427543] coresight-etm fc34f000.etm: ETM initialized
[ 6.428122] coresight-audio-etm audio_etm0.1: Audio ETM initialized
[ 6.428617] coresight-modem-etm modem_etm0.2: Modem ETM initialized
[ 6.429100] coresight-wcn-etm wcn_etm0.3: Wireless ETM initialized
[ 6.429674] coresight-rpm-etm rpm_etm0.4: RPM ETM initialized
[ 6.430863] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 6.430883] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.438206] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
[ 6.438779] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
[ 6.439612] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[ 6.440012] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[ 6.443010] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 6.443356] Netfilter messages via NETLINK v0.30.
[ 6.443473] nf_conntrack version 0.5.0 (6339 buckets, 25356 max)
[ 6.444229] ctnetlink v0.93: registering with nfnetlink.
[ 6.444638] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 6.444646] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 6.444949] xt_time: kernel timezone is -0000
[ 6.445390] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.445711] arp_tables: (C) 2002 David S. Miller
[ 6.445784] TCP: cubic registered
[ 6.446607] NET: Registered protocol family 10
[ 6.450086] Mobile IPv6
[ 6.450132] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 6.450328] IPv6 over IPv4 tunneling driver
[ 6.451013] NET: Registered protocol family 17
[ 6.451140] Bridge firewalling registered
[ 6.451159] Ebtables v2.0 registered
[ 6.592827] Bluetooth: RFCOMM TTY layer initialized
[ 6.597655] Bluetooth: RFCOMM socket layer initialized
[ 6.597679] mmcblk0rpmb: mmc0:0001 H4G1d partition 3 4.00 MiB
[ 6.608570] Bluetooth: RFCOMM ver 1.11
[ 6.612340] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.617549] Bluetooth: BNEP filters: protocol multicast
[ 6.622781] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 6.622934] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22
[ 6.638252] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[ 6.645424] Registering SWP/SWPB emulation handler
[ 6.655989] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 6.656691] input: gpio-keys as /devices/gpio_keys.60/input/input4
[ 6.657136] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[ 6.676533] qcom,qpnp-rtc qpnp-rtc-de519800: setting system clock to 1970-01-01 00:36:00 UTC (2160)
[ 6.676820] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[ 6.676828] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[ 6.676846] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[ 6.677056] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[ 6.677064] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[ 6.677079] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[ 6.677168] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 6.677183] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.682272] batfet:
[ 6.693061] qcom,qpnp-charger:qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 1, dc = 0 b_health = 0 batt_present = 7
[ 6.700841] qcom,qpnp-charger:qpnp_chg_iusbmax_set: bad mA=0 asked to set
[ 6.745034] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[ 6.776810] clock_late_init: Removing enables held for handed-off clocks
[ 6.785491] ALSA device list:
[ 6.789613] No soundcards fou 6.792763] Freeing init memory: 72K
[ 6.804747] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[ 6.838669] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[ 6.845934] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[ 6.854204] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[ 6.880327] type=1403 audit(2160.720:2): policy loaded auid=4294967295 ses=4294967295
[ 6.887336] SELinux: Loaded policy from (null)
[ 6.893474] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[ 6.898043] init: /init.qcom.rc: 259: ignored duplicate definition of service 'usbhub_init'
[ 6.898786] init: /init.qcom.rc: 672: invalid command '/system/bin/log'
[ 6.901677] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[ 6.907736] init: invalid uid 'fm_radio'
[ 6.928943] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[ 6.936480] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[ 6.937651] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
[ 6.951130] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[ 6.999537] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[ 7.006767] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[ 7.014898] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[ 7.023187] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[ 7.055341] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[ 7.062575] BMS: qpnp_bms_probe: probe success: soc =100 vbatt = 4060344 ocv = 4057116 r_sense_uohm = 9406 warm_reset = 1
[ 7.073838] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 7.081271] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 7.089714] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 7.096223] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 7.103772] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 7.581828] init: cannot open '/initlogo.rle'
[ 7.680509] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1
[ 7.693536] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 7.709451] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
[ 7.749039] e2fsck used greatest stack depth: 5328 bytes left
[ 7.753825] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[ 7.758352] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 1015/131072 files, 49722/524288 blocks
[ 7.774538] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
[ 7.788172] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1
[ 7.796192] EXT4-fs (mmcblk0p21): <<<<<wzg Opt_gid
[ 7.804375] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: gid=1015
[ 7.811752] SELinux: Context u:object_r:blinkfeed_file:s0 is not valid (left unmapped).
[ 7.824582] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: barrier=1
[ 7.880056] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
[ 7.890008] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
[ 7.907392] pil-q6v5-lpass fe200000.qcom,lpass: adsp: loading from 0x0c500000 to 0x0d200000
[ 8.083971] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset
[ 8.136041] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Power/Clock ready interrupt received
[ 8.149364] pil-q6v5-lpass fe200000.qcom,lpass: Subsystem error monitoring/handling services are up
[ 8.158527] apr_tal:Q6 Is Up
[ 8.160489] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 8.160544] diag: In diag_send_msg_mask_update, invalid status 0
[ 8.160554] diag: In diag_send_log_mask_update, invalid status 0
[ 8.160658] adsp-loader qcom,msm-adsp-loader.29: adsp_loader_do: Q6/ADSP image is loaded
[ 8.188563] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 8.196292] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[ 8.529700] wcnss_wlan triggered by userspace
[ 8.560067] wcnss_trigger_config: adc get failed
[ 8.563665] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[ 8.564591] init: cannot find '/system/bin/nac_server', disabling 'nac_server'
[ 8.568621] init: cannot find '/system/bin/qrngd', disabling 'qrngd'
[ 8.664951] pil_pronto fb21b000.qcom,pronto: wcnss: loading from 0x0d200000 to 0x0d6ee000
[ 8.731371] init: cannot find '/system/bin/wiperiface', disabling 'wiperiface'
[ 8.742218] init: cannot find '/system/bin/ssr_diag', disabling 'ssr_diag'
shell@msm8610:/ $ [ 8.774875] cp used greatest stack depth: 5068 bytes left
[ 9.246389] diag: In diag_send_msg_mask_update, invalid status 0
[ 9.251851] diag: In diag_send_log_mask_update, invalid status 0
[ 9.261223] sp0a28_sensor_config:632 sp0a28 cfgtype = 8
[ 9.262615] init: untracked pid 274 exited
[ 9.270184] sp0a28_sensor_config:644 sensor name sp0a28
[ 9.274705] sp0a28_sensor_config:646 session id 1
[ 9.279418] sp0a28_sensor_config:649 subdev_id[0] -1
[ 9.284362] sp0a28_sensor_config:649 subdev_id[1] -1
[ 9.289316] sp0a28_sensor_config:649 subdev_id[2] -1
[ 9.294340] sp0a28_sensor_config:649 subdev_id[3] -1
[ 9.299180] sp0a28_sensor_config:649 subdev_id[4] -1
[ 9.304169] sp0a28_sensor_config:649 subdev_id[5] -1
[ 9.309077] sp0a28_sensor_config:649 subdev_id[6] 1
[ 9.315171] sp0a28_sensor_config:649 subdev_id[7] -1
[ 9.319095] sp0a28_sensor_config:649 subdev_id[8] 1
[ 9.325419] sp0a28_sensor_config:649 subdev_id[9] -1
[ 9.329443] sp0a28_sensor_config:632 sp0a28 cfgtype = 9
[ 9.332533] enable_store: android_usb: already disabled
[ 9.339865] sp0a28_sensor_config:686 init params mode 0 pos 1 mount 90
[ 9.344608] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 9.350647] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 9.366561] Error: Driver 'DS' is already registered, aborting...
[ 9.369535] msm8x10-wcd-i2c-core msm8x10_wcd_codec: dapm: unknown pin Lineout amp
[ 9.390894] msm_isp_close_node: halt timeout rc=0
[ 9.433343] wcnss: no space available for smd frame
[ 9.462217] wcnss: no space available for smd frame
[ 9.489564] wcnss: no space available for smd frame
[ 9.519568] wcnss: no space available for smd frame
[ 9.549848] msm_tsens_get_temp: tsens mapping index not found
[ 9.554663] wcnss: not setting up vbatt
[ 9.558765] msm_tsens_get_temp: tsens mapping index not found
[ 9.564241] msm_tsens_get_temp: tsens mapping index not found
[ 9.570039] msm_tsens_get_temp: tsens mapping index not found
[ 9.575578] msm_tsens_get_temp: tsens mapping index not found
[ 9.581418] msm_tsens_get_temp: tsens mapping index not found
[ 9.632222] init: untracked pid 384 exited
[ 9.819425] ------------[ cut here ]------------
[ 9.819454] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[ 9.819462] Unbalanced enable for IRQ 330
[ 9.819681] ---[ end trace 8ecd75e0473f590f ]---
[ 10.049436] ------------[ cut here ]------------
[ 10.049464] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[ 10.049471] Unbalanced enable for IRQ 330
[ 10.049703] ---[ end trace 8ecd75e0473f5910 ]---
[ 10.373312] msm_audio_ion_import: DMA Buf name=audio_acdb_client, fd=18 handle=d8a5fcc0
[ 10.742560] Notify: smsm init
[ 10.776155] msm_ipc_router_send_control_msg: xprt_info not initialized
[ 10.776652] msm_ipc_router_send_control_msg: xprt_info not initialized
[ 11.017590] diag: In diag_send_msg_mask_update, invalid status 0
[ 11.022510] diag: In diag_send_log_mask_update, invalid status 0
[ 16.001613] ------------[ cut here ]------------
[ 16.005224] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[ 16.016317] ---[ end trace 8ecd75e0473f5911 ]---
[ 16.115556] dsi_panel_handler enable=0
[ 16.367570] dsi_panel_handler enable=1
[ 22.375560] pgd = dcdb0000
[ 22.377839] [00000001] *pgd=00000000
[ 22.431988] pgd = dcdb0000
[ 22.433695] [00000001] *pgd=00000000
[ 22.601208] pgd = dcdb0000
[ 22.603487] [00000001] *pgd=00000000
[ 24.095997] BootAnimation used greatest stack depth: 5004 bytes left
[ 30.086892] init: sys_prop: permission denied uid:1013 name:camera.4k2k.enable
[ 30.117510] init: sys_prop: permission denied uid:1013 name:camera.4k2k.enable
[ 30.134833] init: sys_prop: permission denied uid:1013 name:camera.4k2k.enable
[ 30.141600] init: sys_prop: permission denied uid:1013 name:camera.4k2k.enable
[ 30.342734] pgd = dd7fc000
[ 30.345631] [b30f1ab8] *pgd=13fd0831, *pte=00000000, *ppte=00000000
[ 30.354994] pgd = dd7fc000
[ 30.356917] [b30f1ab8] *pgd=13fd0831, *pte=00000000, *ppte=00000000
[ 30.837911] pgd = dd7fc000
[ 30.839822] [b30f1ab8] *pgd=13fd0831, *pte=00000000, *ppte=00000000
[ 31.165184] msm_audio_ion_import: DMA Buf name=audio_acdb_client, fd=18 handle=dd53fcc0
[ 37.462104] init: sys_prop: permission denied uid:1013 name:camera.4k2k.enable
[ 37.479070] init: sys_prop: permission denied uid:1013 name:camera.4k2k.enable
[ 37.493942] init: sys_prop: permission denied uid:1013 name:camera.4k2k.enable
[ 37.500626] init: sys_prop: permission denied uid:1013 name:camera.4k2k.enable
[ 46.028712] dsi_panel_handler enable=0
[ 49.946561] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[ 49.953501] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[ 49.961463] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[ 49.969165] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 49.975527] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[ 49.995925] pgd = c411c000
[ 49.997600] [b4199ab8] *pgd=00000000
[ 50.007896] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 50.013437] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 50.019780] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 50.148962] dsi_panel_handler enable=1
[ 50.152579] pgd = c411c000
[ 50.152588] [b4199ab8] *pgd=00000000
[ 50.389438] ------------[ cut here ]------------
[ 50.393271] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[ 50.402724] Unbalanced enable for IRQ 330
[ 50.406898] ---[ end trace 8ecd75e0473f5912 ]---
[ 50.532047] pgd = c411c000
[ 50.533726] [b4199ab8] *pgd=00000000
[ 50.743611] msm_audio_ion_import: DMA Buf name=audio_acdb_client, fd=18 handle=dcd3ba40