描述符相关的时间定时器

描述符相关的定时器是指可以通过描述符进行操作的一种定时器。

下面根据man pages提供的例子学习该定时器的具体应用。

主要头文件和函数有

       #include <sys/timerfd.h>

       int timerfd_create(int clockid, int flags);

clockid 可为CLOCK_MONOTONIC 或者 CLOCK_REALTIME;

CLOCK_REALTIME：真实时间类型，修改时钟会影响定时器;系统实时时间,随系统实时时间改变而改变,即从UTC1970-1-1 0:0:0开始计时;

CLOCK_MONOTONIC：相对时间类型，修改时钟不影响定时器;从系统启动这一刻起开始计时,不受系统时间被用户改变的影响 ;

       int timerfd_settime(int fd, int flags,
                           const struct itimerspec *new_value,
                           struct itimerspec *old_value);

参数flags为TFD_TIMER_ABSTIME代表设置的是绝对时间；

为0代表相对时间。后面会举例子说明两者的区别。

       int timerfd_gettime(int fd, struct itimerspec *curr_value);

代码例子：

   #include <sys/timerfd.h>
       #include <time.h>
       #include <unistd.h>
       #include <stdlib.h>
       #include <stdio.h>
       #include <stdint.h>        /* Definition of uint64_t */

       #define handle_error(msg) \
               do { perror(msg); exit(EXIT_FAILURE); } while (0)

       static void
       print_elapsed_time(void)
       {
           static struct timespec start;
           struct timespec curr;
           static int first_call = 1;
           int secs, nsecs;

           if (first_call) {
               first_call = 0;
               if (clock_gettime(CLOCK_MONOTONIC, &start) == -1)
                   handle_error("clock_gettime");
           }

           if (clock_gettime(CLOCK_MONOTONIC, &curr) == -1)
               handle_error("clock_gettime");

           secs = curr.tv_sec - start.tv_sec;
           nsecs = curr.tv_nsec - start.tv_nsec;
           if (nsecs < 0) {
               secs--;
               nsecs += 1000000000;
           }
           printf("%d.%03d: ", secs, (nsecs + 500000) / 1000000);
       }

int
main(int argc, char *argv[])
       {
           struct itimerspec new_value;
           int max_exp, fd;
           struct timespec now;
           uint64_t exp, tot_exp;
           ssize_t s;

           if ((argc != 2) && (argc != 4)) {
               fprintf(stderr, "%s init-secs [interval-secs max-exp]\n",
                       argv[0]);
               exit(EXIT_FAILURE);
           }

           if (clock_gettime(CLOCK_REALTIME, &now) == -1)
               handle_error("clock_gettime");

           /* Create a CLOCK_REALTIME absolute timer with initial
              expiration and interval as specified in command line */

           new_value.it_value.tv_sec = now.tv_sec + atoi(argv[1]);
           new_value.it_value.tv_nsec = now.tv_nsec;

           if (argc == 2) {
               new_value.it_interval.tv_sec = 0;
               max_exp = 1;
           } else {
               new_value.it_interval.tv_sec = atoi(argv[2]);
               max_exp = atoi(argv[3]);
           }
           new_value.it_interval.tv_nsec = 0;

           fd = timerfd_create(CLOCK_REALTIME, 0);
           if (fd == -1)
               handle_error("timerfd_create");

    //TFD_TIMER_ABSTIME
     if (timerfd_settime(fd, TFD_TIMER_ABSTIME, &new_value, NULL) == -1)
               handle_error("timerfd_settime");

           print_elapsed_time();
           printf("timer started\n");

           for (tot_exp = 0; tot_exp < max_exp;) {
               s = read(fd, &exp, sizeof(uint64_t));
               if (s != sizeof(uint64_t))
                   handle_error("read");

               tot_exp += exp;
               print_elapsed_time();
               printf("read: %llu; total=%llu\n",
                       (unsigned long long) exp,
                       (unsigned long long) tot_exp);
           }

           exit(EXIT_SUCCESS);
       }

代码片段2：

两个程序的效果是一样，区别是 timerfd_settime() flag参数由TFD_TIMER_ABSTIME 改为 0注意观察第二个参数赋值的变化；

  #include <sys/timerfd.h>
       #include <time.h>
       #include <unistd.h>
       #include <stdlib.h>
       #include <stdio.h>
       #include <stdint.h>        /* Definition of uint64_t */

       #define handle_error(msg) \
               do { perror(msg); exit(EXIT_FAILURE); } while (0)

       static void
       print_elapsed_time(void)
       {
           static struct timespec start;
           struct timespec curr;
           static int first_call = 1;
           int secs, nsecs;

           if (first_call) {
               first_call = 0;
               if (clock_gettime(CLOCK_MONOTONIC, &start) == -1)
                   handle_error("clock_gettime");
           }

           if (clock_gettime(CLOCK_MONOTONIC, &curr) == -1)
               handle_error("clock_gettime");

           secs = curr.tv_sec - start.tv_sec;
           nsecs = curr.tv_nsec - start.tv_nsec;
           if (nsecs < 0) {
               secs--;
               nsecs += 1000000000;
           }
           printf("%d.%03d: ", secs, (nsecs + 500000) / 1000000);
       }

int
main(int argc, char *argv[])
       {
           struct itimerspec new_value;
           int max_exp, fd;
           struct timespec now;
           uint64_t exp, tot_exp;
           ssize_t s;

           if ((argc != 2) && (argc != 4)) {
               fprintf(stderr, "%s init-secs [interval-secs max-exp]\n",
                       argv[0]);
               exit(EXIT_FAILURE);
           }

           if (clock_gettime(CLOCK_REALTIME, &now) == -1)
               handle_error("clock_gettime");

           /* Create a CLOCK_REALTIME relative timer with initial
              expiration and interval as specified in command line */

           //new_value.it_value.tv_sec = now.tv_sec + atoi(argv[1]);
           //new_value.it_value.tv_nsec = now.tv_nsec;

	   new_value.it_value.tv_sec = atoi(argv[1]);//modify
           new_value.it_value.tv_nsec = 0;//modify

           if (argc == 2) {
               new_value.it_interval.tv_sec = 0;
               max_exp = 1;
           } else {
               new_value.it_interval.tv_sec = atoi(argv[2]);
               max_exp = atoi(argv[3]);
           }
           new_value.it_interval.tv_nsec = 0;

           fd = timerfd_create(CLOCK_REALTIME, 0);
           if (fd == -1)
               handle_error("timerfd_create");

	//TFD_TIMER_ABSTIME modify to 0, relative timer
 	if (timerfd_settime(fd, 0, &new_value, NULL) == -1)
               handle_error("timerfd_settime");

           print_elapsed_time();
           printf("timer started\n");

           for (tot_exp = 0; tot_exp < max_exp;) {
               s = read(fd, &exp, sizeof(uint64_t));
               if (s != sizeof(uint64_t))
                   handle_error("read");

               tot_exp += exp;
               print_elapsed_time();
               printf("read: %llu; total=%llu\n",
                       (unsigned long long) exp,
                       (unsigned long long) tot_exp);
           }

           exit(EXIT_SUCCESS);
       }

http://blog.csdn.net/sunlylorn/article/details/6313278

http://blog.csdn.net/chgaowei/article/details/21295811

http://blog.csdn.net/gdutliuyun827/article/details/8470777

http://www.kernel.org/doc/man-pages/.