puppet 横向扩展(三)

Table of Contents

• 1. 概述
• 2. 实验环境
• 3. 实验步骤
  • 3.1. 机器B 的配置
  • 3.2. 机器A 的配置
  • 3.3. 测试配置结果

概述

横向扩展实验之三 – 将CA 认证服务和 puppetmaster 分开

实验环境

master 和 node 都是 debian 7.7 i686 系统
2个 puppet master 在机器A 上, 都是 apache 虚拟主机
1个 CA 认证服务在 机器B 上.

实验步骤

机器B 的配置

# 清除 ca-1 上的既有证书
root@ca-1:~# rm -rf /var/lib/puppet/ssl/

# 在机器A 上认证 ca-1
# 补充: master-1 的IP就是 192.168.1.100
# 补充: ca-1 作为agent 连接master-1, 需要配置 /etc/hosts 和 /etc/puppet/puppet.conf
root@ca-1:/var/lib/puppet# puppet agent --test --server=192.168.1.100
Info: Creating a new SSL key for ca-1.puppet.com
Info: Caching certificate for ca
Info: csr_attributes file loading from /etc/puppet/csr_attributes.yaml
Info: Creating a new SSL certificate request for ca-1.puppet.com
Info: Certificate Request fingerprint (SHA256): C3:CD:C6:8E:34:22:40:8D:32:00:1B:E5:54:E2:C1:C7:96:79:BF:B0:1A:A8:FD:11:B4:32:D6:4F:AE:54:AB:94
Info: Caching certificate for ca
Exiting; no certificate found and waitforcert is disabled
root@ca-1:/var/lib/puppet# puppet agent --test
Info: Caching certificate for ca-1.puppet.com
Info: Caching certificate_revocation_list for ca
Info: Caching certificate for ca-1.puppet.com
Info: Retrieving pluginfacts
Info: Retrieving plugin
Info: Caching catalog for ca-1.puppet.com
Info: Applying configuration version '1420697839'
Notice: Finished catalog run in 0.01 seconds

# 将机器A 上的证书移到 ca-1 上 (机器A 之前作为CA服务器, 上面有 node 的认证情况)
root@master-1:~# rsync -PHaze ssh /var/lib/puppet/ssl/ca 192.168.1.101:/var/lib/puppet/ssl/
[email protected]'s password:
sending incremental file list
ca/
ca/ca_crl.pem
        1202 100%    0.00kB/s    0:00:00 (xfer#1, to-check=12/14)
ca/ca_crt.pem
        1968 100%    1.88MB/s    0:00:00 (xfer#2, to-check=11/14)
ca/ca_key.pem
        3243 100%    3.09MB/s    0:00:00 (xfer#3, to-check=10/14)
ca/ca_pub.pem
         800 100%  781.25kB/s    0:00:00 (xfer#4, to-check=9/14)
ca/inventory.txt
         611 100%  596.68kB/s    0:00:00 (xfer#5, to-check=8/14)
ca/serial
           4 100%    3.91kB/s    0:00:00 (xfer#6, to-check=7/14)
ca/private/
ca/private/ca.pass
          20 100%   19.53kB/s    0:00:00 (xfer#7, to-check=3/14)
ca/requests/
ca/signed/
ca/signed/ca-1.puppet.com.pem
        1956 100%    1.87MB/s    0:00:00 (xfer#8, to-check=2/14)
ca/signed/master-1.puppet.com.pem
        2041 100%    1.95MB/s    0:00:00 (xfer#9, to-check=1/14)
ca/signed/node-1.puppet.com.pem
        1960 100%    1.87MB/s    0:00:00 (xfer#10, to-check=0/14)

sent 10898 bytes  received 218 bytes  1170.11 bytes/sec
total size is 13805  speedup is 1.24

# 修改 ca-1 上默认的 puppetmaster 配置
root@ca-1:~# cat /etc/apache2/sites-available/puppetmaster
# This Apache 2 virtual host config shows how to use Puppet as a Rack
# application via Passenger. See
# http://docs.puppetlabs.com/guides/passenger.html for more information.

# You can also use the included config.ru file to run Puppet with other Rack
# servers instead of Passenger.

# you probably want to tune these settings
PassengerHighPerformance on
PassengerMaxPoolSize 12
PassengerPoolIdleTime 1500
# PassengerMaxRequests 1000
PassengerStatThrottleRate 120
RackAutoDetect Off
RailsAutoDetect Off

Listen 8140

<VirtualHost *:8140>
        SSLEngine on
        SSLProtocol             ALL -SSLv2 -SSLv3
        SSLCipherSuite          EDH+CAMELLIA:EDH+aRSA:EECDH+aRSA+AESGCM:EECDH+aRSA+SHA384:EECDH+aRSA+SHA256:EECDH:+CAMELLIA256:+AES256:+CAMELLIA128:+AES128:+SSLv3:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!DSS:!RC4:!SEED:!IDEA:!ECDSA:kEDH:CAMELLIA256-SHA:AES256-SHA:CAMELLIA128-SHA:AES128-SHA
        SSLHonorCipherOrder     on

        SSLCertificateFile      /var/lib/puppet/ssl/certs/ca-1.puppet.com.pem
        SSLCertificateKeyFile   /var/lib/puppet/ssl/private_keys/ca-1.puppet.com.pem
        SSLCertificateChainFile /var/lib/puppet/ssl/certs/ca.pem
        SSLCACertificateFile    /var/lib/puppet/ssl/certs/ca.pem
        # If Apache complains about invalid signatures on the CRL, you can try disabling
        # CRL checking by commenting the next line, but this is not recommended.
        SSLCARevocationFile     /var/lib/puppet/ssl/ca/ca_crl.pem
        # Apache 2.4 introduces the SSLCARevocationCheck directive and sets it to none
        # which effectively disables CRL checking; if you are using Apache 2.4+ you must
        # specify 'SSLCARevocationCheck chain' to actually use the CRL.
        # SSLCARevocationCheck chain
        SSLVerifyClient optional
        SSLVerifyDepth  1
        # The `ExportCertData` option is needed for agent certificate expiration warnings
        SSLOptions +StdEnvVars +ExportCertData

        # This header needs to be set if using a loadbalancer or proxy
        #!!! RequestHeader 相关内容都要注释掉
        #RequestHeader unset X-Forwarded-For

        #RequestHeader set X-SSL-Subject %{SSL_CLIENT_S_DN}e
        #RequestHeader set X-Client-DN %{SSL_CLIENT_S_DN}e
        #RequestHeader set X-Client-Verify %{SSL_CLIENT_VERIFY}e

        DocumentRoot /usr/share/puppet/rack/puppetmasterd/public/
        RackBaseURI /
        <Directory /usr/share/puppet/rack/puppetmasterd/>
                Options None
                AllowOverride None
                Order allow,deny
                allow from all
        </Directory>
</VirtualHost>

机器A 的配置

就用 puppet横向扩展(一) 中所使用的环境就行

机器B 配置好之后, 修改 apache 的配置, 使之将 CA认证服务指向机器B上的 ca-1
重要的地方, 我加了 #!!! 的注释

# 完整的 proxy 配置如下: 192.168.1.101 就是ca-1 的IP
root@master-1:~# cat /etc/apache2/sites-available/puppetmaster_proxy.conf
# Available back-end worker virtual hosts
# NOTE the use of cleartext unencrypted HTTP.
<Proxy balancer://puppetmasterca>
  BalancerMember https://192.168.1.101:8140    #!!! 这里是 https
</Proxy>

<Proxy balancer://puppetmaster>
  BalancerMember http://127.0.0.1:18140
  BalancerMember http://127.0.0.1:18141
</Proxy>

Listen 8140
<VirtualHost *:8140>
  SSLEngine on
  SSLProxyEngine on     #!!! 这句很重要, 否则无法代理 https 的请求
  # SSLCipherSuite SSLv2:-LOW:-EXPORT:RC4+RSA
  SSLProtocol ALL +SSLv3 +TLSv1
  SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:-LOW:-SSLv2:-EXP
  #SSLProtocol ALL -SSLv2
  #SSLCipherSuite HIGH:!ADH:RC4+RSA:-MEDIUM:-LOW:-EXP
  # Puppet master should generate initial CA certificate.
  # ensure certs are located in /var/lib/puppet/ssl
  SSLCertificateFile /var/lib/puppet/ssl/certs/master-1.puppet.com.pem
  SSLCertificateKeyFile /var/lib/puppet/ssl/private_keys/master-1.puppet.com.pem
  SSLCertificateChainFile /var/lib/puppet/ssl/ca/ca_crt.pem
  SSLCACertificateFile /var/lib/puppet/ssl/ca/ca_crt.pem
  SSLCARevocationFile /var/lib/puppet/ssl/ca/ca_crl.pem
  # optional to all CSR request, required if certificates distributed to client during provisioning.
  SSLVerifyClient optional
  SSLVerifyDepth 1
  SSLOptions +StdEnvVars

  # The following client headers record authentication information for downstream workers.
  RequestHeader set X-SSL-Subject %{SSL_CLIENT_S_DN}e
  RequestHeader set X-Client-DN %{SSL_CLIENT_S_DN}e
  RequestHeader set X-Client-Verify %{SSL_CLIENT_VERIFY}e

  <Location />
    SetHandler balancer-manager
    Order allow,deny
    Allow from all
  </Location>

  ProxyPassMatch ^(/.*?)/(certificate.*?)/(.*)$ balancer://puppetmasterca
  ProxyPassReverse ^(/.*?)/(certificate.*?)/(.*)$ balancer://puppetmasterca

  ProxyPass / balancer://puppetmaster/
  ProxyPassReverse / balancer://puppetmaster/
  ProxyPreserveHost On

  # log settings
  ErrorLog /var/log/apache2/balancer_error.log
  CustomLog /var/log/apache2/balancer_access.log combined
  CustomLog /var/log/apache2/balancer_ssl_requests.log "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost>

ca 的服务也配置成负载均衡的模式了, 方便追加新的 ca 服务器

测试配置结果

# master-1 上, 清理log, 重启 apache服务
root@master-1:~# rm -f /var/log/apache2/*
root@master-1:~# service apache2 restart
[ ok ] Restarting web server: apache2 ... waiting .

# ca-1 上, 清理log, 重启 apache服务
root@ca-1:~# rm -f /var/log/apache2/*
root@ca-1:~# service apache2 restart
[ ok ] Restarting web server: apache2 ... waiting .

# 新建 agent 发送请求, 注意这个agent 不能是已经认证过的, 否则不会请求 ca-1
root@node-2:~# puppet agent --test
Info: Caching certificate for ca
Info: csr_attributes file loading from /etc/puppet/csr_attributes.yaml
Info: Creating a new SSL certificate request for node-2.puppet.com
Info: Certificate Request fingerprint (SHA256): E5:5C:82:63:0E:E5:41:FD:90:E4:BF:81:98:57:16:A5:98:72:64:1E:52:42:97:9D:1D:A5:43:5C:6D:19:C4:D1
Info: Caching certificate for ca
Exiting; no certificate found and waitforcert is disabled

#  master-1 上没有生成证书请求
root@master-1:~# puppet cert list --all
+ "ca-1.puppet.com"     (SHA256) 60:9F:42:7C:1C:70:D6:5C:C7:01:93:BF:69:8D:3C:6C:FE:26:D4:16:7A:E4:08:85:DE:77:94:2B:6A:2D:20:99
+ "master-1.puppet.com" (SHA256) 38:79:AE:E8:BF:04:EB:F5:C5:D0:62:08:35:D0:4A:13:A7:D4:F4:63:D7:C8:E4:D3:54:1E:35:E3:9F:70:A2:FE (alt names: "DNS:master-1.puppet.com", "DNS:puppet", "DNS:puppet.puppet.com")
+ "node-1.puppet.com"   (SHA256) 2A:3B:D4:A7:D2:29:50:AC:06:38:B7:16:AC:B8:F7:0C:4F:74:2A:28:6D:1F:00:D7:72:BB:C2:BE:6E:70:ED:AA

# ca-1 上生成了证书请求, 说明证书服务确实转移到 ca-1 上来处理了, node-2 就是新的agent 请求的证书
root@ca-1:~# puppet cert list --all
  "node-2.puppet.com"   (SHA256) E5:5C:82:63:0E:E5:41:FD:90:E4:BF:81:98:57:16:A5:98:72:64:1E:52:42:97:9D:1D:A5:43:5C:6D:19:C4:D1
+ "ca-1.puppet.com"     (SHA256) 60:9F:42:7C:1C:70:D6:5C:C7:01:93:BF:69:8D:3C:6C:FE:26:D4:16:7A:E4:08:85:DE:77:94:2B:6A:2D:20:99
+ "master-1.puppet.com" (SHA256) 38:79:AE:E8:BF:04:EB:F5:C5:D0:62:08:35:D0:4A:13:A7:D4:F4:63:D7:C8:E4:D3:54:1E:35:E3:9F:70:A2:FE (alt names: "DNS:master-1.puppet.com", "DNS:puppet", "DNS:puppet.puppet.com")
+ "node-1.puppet.com"   (SHA256) 2A:3B:D4:A7:D2:29:50:AC:06:38:B7:16:AC:B8:F7:0C:4F:74:2A:28:6D:1F:00:D7:72:BB:C2:BE:6E:70:ED:AA