CMarkup类在VC中的使用

 首先到http://www.firstobject.com/dn_markup.htm上面下载CMarkup类，将CMarkup.cpp和CMarkup.h导入到我们的工程中就可以了。编译可能会出现问题，解决的方法是在CMarkup.cpp的开头加上#include <stdafx.h>，或者关闭预编译也可以。

1、创建一个XML文档

对于创建一个XML文档，需要实例化一个CMarkup对象，并调用AddElem创建根元素。在这个位置，如果你调用 AddElem("School") ，文档会简单的装一个空元素<School/>. 然后调用AddChildElem 在根元素的下面创建元素。

 1     CMarkup xml;
 2     xml.SetDoc("<?xml version=\"1.0\" encoding=\"UTF-8\"?>\r\n");
 3     xml.AddElem("School");
 4     xml.IntoElem();
 5     xml.AddElem("Department","Automation");
 6     xml.AddElem("Department","Computer");
 7     xml.AddElem("Department","Math");
 8     xml.AddElem("Department","English");
 9     xml.OutOfElem();
10     xml.Save("School.xml");

效果如下：

 

1<?xml version="1.0" encoding="UTF-8"?>
2<School>
3    <Department>Automation</Department>
4    <Department>Computer</Department>
5    <Department>Math</Department>
6    <Department>English</Department>
7</School>
8

2、浏览特定元素

 1     CMarkup xml;
 2     xml.Load("School.xml");
 3     BOOL bFind=TRUE;
 4     xml.ResetMainPos();
 5     
 6     while(xml.FindChildElem("Department"))
 7     {
 8         CString strTagName=_T("");
 9         CString strData=_T("");
10         strTagName=xml.GetChildTagName();    //此时节点是父节点
11         strData=xml.GetChildData();
12         TRACE("\n---tagName:%s,Data:%s--\n",strTagName,strData);
13     }

//***********************这样也可以*****************************/

 1     CMarkup xml;
 2     xml.Load("School.xml");
 3     BOOL bFind = TRUE;
 4     xml.ResetMainPos();
 5     
 6     while (xml.FindChildElem("Department"))        
 7     {
 8         xml.IntoElem();
 9         CString strTagName = _T("");
10         CString strData = _T("");
11         strTagName = xml.GetTagName();
12         strData = xml.GetData();
13         TRACE("\n---tagName:%s,Data:%s--\n",strTagName,strData);
14         xml.OutOfElem();
15     }

//***********************或者这样也可以***************************/

 1     CMarkup xml;
 2     xml.Load("School.xml");
 3     BOOL bFind = TRUE;
 4     xml.ResetMainPos();
 5     xml.FindElem();  //School
 6     xml.IntoElem();
 7     
 8     while (xml.FindElem("Department"))
 9     {
10         CString strTagName = _T("");
11         CString strData = _T("");
12         strTagName = xml.GetTagName();
13         strData = xml.GetData();
14         TRACE("\n---tagName:%s,Data:%s--\n",strTagName,strData);
15     }

//***********结果**************
      ---tagName:Department,Data:Automation--

---tagName:Department,Data:Computer--

---tagName:Department,Data:Math--

---tagName:Department,Data:English--

3、修改元素
//把Department为”English“改为”Chinese“

 1     CMarkup xml;
 2     BOOL bLoadXml=FALSE;
 3     bLoadXml=xml.Load("School.xml");
 4 
 5     if(bLoadXml)
 6     {
 7         CString str=_T("");
 8         xml.ResetMainPos();
 9         xml.FindElem();
10         xml.IntoElem();
11         while(xml.FindElem("Department"))
12         {
13             str=xml.GetData();
14             if(str=="English")
15             {
16                 xml.SetData("Chinese");
17                 xml.Save("School.xml");
18                 break;
19             }
20         }
21     }

效果如下：

1<?xml version="1.0" encoding="UTF-8"?>
2<School>
3    <Department>Automation</Department>
4    <Department>Computer</Department>
5    <Department>Math</Department>
6    <Department>Chinese</Department>
7</School>
8

4、添加
4、1 添加在最后面（用AddElem）

 1     CMarkup xml;
 2     BOOL bLoadXml=FALSE;
 3     bLoadXml=xml.Load("School.xml");
 4     if(bLoadXml)
 5     {
 6         xml.ResetMainPos();
 7         xml.FindElem();
 8         xml.IntoElem();
 9         xml.AddElem("Department","SiQinghua");
10         xml.OutOfElem();
11         xml.Save("School.xml");
12     }

效果如下：

1<?xml version="1.0" encoding="UTF-8"?>
2<School>
3    <Department>Automation</Department>
4    <Department>Computer</Department>
5    <Department>Math</Department>
6    <Department>Chinese</Department>
7    <Department>SiQinghua</Department>
8</School>

4、2 添加在最前面（用InsertElem）

 1     CMarkup xml;
 2     BOOL bLoadXml=FALSE;
 3     bLoadXml=xml.Load("School.xml");
 4     if(bLoadXml)
 5     {
 6         xml.ResetMainPos();
 7         xml.FindElem();
 8         xml.IntoElem();
 9         xml.AddElem("Department","SiQinghua");
10         xml.OutOfElem();
11         xml.Save("School.xml");
12     }

效果如下：

 1<?xml version="1.0" encoding="UTF-8"?>
 2<School>
 3    <Department>NARI</Department>
 4    <Department>Automation</Department>
 5    <Department>Computer</Department>
 6    <Department>Math</Department>
 7    <Department>Chinese</Department>
 8    <Department>SiQinghua</Department>
 9</School>
10

5、删除

 1     CMarkup xml;
 2     BOOL bLoadXml=FALSE;
 3     bLoadXml=xml.Load("School.xml");
 4     if(bLoadXml)
 5     {
 6         BOOL bFind=TRUE;
 7         xml.ResetMainPos();
 8         while(bFind)
 9         {
10             bFind=xml.FindChildElem("Department");
11             if(bFind)
12             {
13                 CString strData=_T("");
14                 strData=xml.GetChildData();    //此时节点还是父节点
15                 if("SiQinghua"==strData)
16                 {
17                     xml.RemoveChildElem();
18                     xml.Save("School.xml");
19                     break;
20                 }
21             }
22         }
23     }

效果如下：

1 <?xml version="1.0" encoding="UTF-8"?>
2 <School>
3     <Department>NARI</Department>
4     <Department>Automation</Department>
5     <Department>Computer</Department>
6     <Department>Math</Department>
7     <Department>Chinese</Department>
8 </School>
9 

上面的例子都是不带属性的，下面举一个带有属性的例子。
1、生成XML文档

 1     CMarkup xml;
 2     xml.SetDoc("<?xml version=\"1.0\" encoding=\"UTF-8\"?>");
 3     xml.AddElem("UserInfo");
 4     xml.IntoElem();
 5     for(int i=0;i<10;i++)
 6     {
 7         CString strID=_T("");
 8         CString strPwd=_T("");
 9 
10         srand(UINT(time(NULL)+i)); //产生一个随机数
11         int nLevel=rand()%256;
12 
13         strID.Format("UserID%02d",i);
14         strPwd.Format("UserPwd%02d",i);
15 
16         xml.AddElem("User");
17         xml.AddAttrib("UserID",strID);
18         xml.AddAttrib("UserPwd",strPwd);
19         xml.AddAttrib("UserLevel",nLevel);
20     }
21     xml.OutOfElem();
22     xml.Save("UserInfo.xml");

效果如下：

 1<?xml version="1.0" encoding="UTF-8"?>
 2<UserInfo>
 3    <User UserID="UserID00" UserPwd="UserPwd00" UserLevel="85"/>
 4    <User UserID="UserID01" UserPwd="UserPwd01" UserLevel="88"/>
 5    <User UserID="UserID02" UserPwd="UserPwd02" UserLevel="92"/>
 6    <User UserID="UserID03" UserPwd="UserPwd03" UserLevel="95"/>
 7    <User UserID="UserID04" UserPwd="UserPwd04" UserLevel="98"/>
 8    <User UserID="UserID05" UserPwd="UserPwd05" UserLevel="101"/>
 9    <User UserID="UserID06" UserPwd="UserPwd06" UserLevel="105"/>
10    <User UserID="UserID07" UserPwd="UserPwd07" UserLevel="108"/>
11    <User UserID="UserID08" UserPwd="UserPwd08" UserLevel="111"/>
12    <User UserID="UserID09" UserPwd="UserPwd09" UserLevel="115"/>
13</UserInfo>
14

2、查找特定属性

 1     CMarkup xml;
 2     BOOL bLoadXml=FALSE;
 3     BOOL bFind=FALSE;
 4     bLoadXml=xml.Load("UserInfo.xml");
 5     if(bLoadXml)
 6     {
 7         CString strID;
 8         CString strPwd;
 9         xml.ResetMainPos();
10         xml.FindElem();    //UserInfo
11         while(xml.FindChildElem("User"))
12         {
13             strID=xml.GetChildAttrib("UserID");
14             strPwd=xml.GetChildAttrib("UserPwd");
15             TRACE("\n---id:%s,pwd:%s---\n",strID,strPwd);
16             if(strID=="UserID02" && strPwd=="UserPwd02")
17             {
18                 bFind=TRUE;
19                 break;
20             }
21         }
22     }
23     if(bFind==TRUE)
24         TRACE("\n---find---\n");
25     else
26         TRACE("\n---not find---\n");

3、修改特定属性

 1     CMarkup xml;
 2     BOOL bFind=FALSE;
 3     BOOL bLoadXml=FALSE;
 4     bLoadXml=xml.Load("UserInfo.xml");
 5     if(bLoadXml)
 6     {
 7         CString strID;
 8         CString strPwd;
 9         xml.ResetMainPos();
10         xml.FindElem();    //UserInfo
11         while(xml.FindChildElem("User"))
12         {
13             strID=xml.GetChildAttrib("UserID");
14             strPwd=xml.GetChildAttrib("UserPwd");
15             TRACE("\n--id:%s,pwd:%s--\n",strID,strPwd);
16             if(strID=="UserID02" && strPwd=="UserPwd02")
17             {
18                 bFind=TRUE;
19                 xml.SetChildAttrib("UserID",strID+CString("Modified"));
20                 xml.Save("UserInfo.xml");
21                 break;
22             }
23         }
24     }
25     if(bFind==TRUE)
26         TRACE("\n---find---\n");
27     else
28         TRACE("\n---not find---\n");

效果如下：

 1<?xml version="1.0" encoding="UTF-8"?>
 2<UserInfo>
 3    <User UserID="UserID00" UserPwd="UserPwd00" UserLevel="85"/>
 4    <User UserID="UserID01" UserPwd="UserPwd01" UserLevel="88"/>
 5    <User UserID="UserID02Modified" UserPwd="UserPwd02" UserLevel="92"/>
 6    <User UserID="UserID03" UserPwd="UserPwd03" UserLevel="95"/>
 7    <User UserID="UserID04" UserPwd="UserPwd04" UserLevel="98"/>
 8    <User UserID="UserID05" UserPwd="UserPwd05" UserLevel="101"/>
 9    <User UserID="UserID06" UserPwd="UserPwd06" UserLevel="105"/>
10    <User UserID="UserID07" UserPwd="UserPwd07" UserLevel="108"/>
11    <User UserID="UserID08" UserPwd="UserPwd08" UserLevel="111"/>
12    <User UserID="UserID09" UserPwd="UserPwd09" UserLevel="115"/>
13</UserInfo>