UF_begin_timer计时函数 | https://www.cnblogs.com/nxopen2018/p/10957135.html |
UF_end_timer计时函数 | https://www.cnblogs.com/nxopen2018/p/11099462.html |
UF_initialize初始化 | https://www.cnblogs.com/nxopen2018/p/10952538.html |
UF_terminate终止 | https://www.cnblogs.com/nxopen2018/p/10957141.html |
UF_translate_variable获取环境变量路径 | https://www.cnblogs.com/nxopen2018/p/10957146.html |
UF_ask_system_info获取系统相关信息 | https://www.cnblogs.com/nxopen2018/p/10957155.html |
UF_set_variable设置环境变量 | https://www.cnblogs.com/nxopen2018/p/10957152.html |
UF_ask_application_module获取当前所在的模块 | https://www.cnblogs.com/nxopen2018/p/10957158.html |
UF_get_fail_message输出UF函数使用错误 | https://www.cnblogs.com/nxopen2018/p/11116249.html |
uc4504打开本地文本文档 | https://www.cnblogs.com/nxopen2018/p/10952574.html |
uc4514a读取打开的文本文档 | https://www.cnblogs.com/nxopen2018/p/11099437.html |
uc4540关闭文本文档 | https://www.cnblogs.com/nxopen2018/p/11099441.html |
uc4524写入内容到文本文档 | https://www.cnblogs.com/nxopen2018/p/11099447.html |
UF_CFI_ask_file_exist判断文件是否存在 | https://www.cnblogs.com/nxopen2018/p/11116088.html |
UF_CSYS_ask_wcs获取WCS标识 | https://www.cnblogs.com/nxopen2018/p/10952631.html |
UF_CSYS_ask_csys_info获取坐标系信息 | https://www.cnblogs.com/nxopen2018/p/10957168.html |
UF_CSYS_ask_matrix_values获取矩阵值 | https://www.cnblogs.com/nxopen2018/p/10957163.html |
UF_CSYS_create_matrix创建一个3 x 3矩阵 | https://www.cnblogs.com/nxopen2018/p/10957182.html |
UF_CSYS_create_csys创建CSYS坐标系 | https://www.cnblogs.com/nxopen2018/p/10957177.html |
UF_CSYS_set_wcs设置WCS位置 | https://www.cnblogs.com/nxopen2018/p/10957171.html |
UF_CSYS_create_temp_csys创建临时坐标系 | https://www.cnblogs.com/nxopen2018/p/10957181.html |
UF_CSYS_set_wcs_display设置WCS显示 | https://www.cnblogs.com/nxopen2018/p/10957175.html |
UF_CSYS_map_point坐标系转换 | https://www.cnblogs.com/nxopen2018/p/11809941.html |
UF_CURVE_create_line创建直线(点-点) | https://www.cnblogs.com/nxopen2018/p/10957289.html |
UF_CURVE_create_line创建直线(起点-向量方向-长度) | https://www.cnblogs.com/nxopen2018/p/10957300.html |
UF_CURVE_create_arc_3point创建圆弧(三点圆弧) | https://www.cnblogs.com/nxopen2018/p/10957294.html |
UF_CURVE_create_arc创建圆弧(圆心-半径) | https://www.cnblogs.com/nxopen2018/p/10957296.html |
UF_CURVE_create_arc_point_point_radius创建圆弧(起点-终点-半径) | https://www.cnblogs.com/nxopen2018/p/10957292.html |
UF_CURVE_create_arc_center_radius创建圆弧(圆心-半径) | https://www.cnblogs.com/nxopen2018/p/10957304.html |
UF_CURVE_ask_line_data获取直线的两个端点 | https://www.cnblogs.com/nxopen2018/p/10957299.html |
UF_CURVE_ask_arc_data圆弧矩阵标记、起始角和结束角(弧度测量)、圆弧中心坐标和圆弧半径(边可以用) | https://www.cnblogs.com/nxopen2018/p/11853570.html |
uc1601窗口打印 | https://www.cnblogs.com/nxopen2018/p/10957280.html |
UF_UI_open_listing_window()打开信息窗口 | https://www.cnblogs.com/nxopen2018/p/10957287.html |
UF_UI_write_listing_window信息窗口打印 | https://www.cnblogs.com/nxopen2018/p/10957285.html |
uc1605多选菜单对话框 | https://www.cnblogs.com/nxopen2018/p/11099385.html |
UF_UI_create_filebox文件选择对话框 | https://www.cnblogs.com/nxopen2018/p/11099356.html |
UF_UI_create_filebox打开选择文件夹对话框 | https://www.cnblogs.com/nxopen2018/p/11829577.html |
vc弹出选择文件夹对话框 | https://www.cnblogs.com/nxopen2018/p/11232120.html |
UF_UI_message_dialog多按钮模态对话框 | https://www.cnblogs.com/nxopen2018/p/11099351.html |
uc1603单选菜单对话框 | https://www.cnblogs.com/nxopen2018/p/10981531.html |
UF_UI_point_construct点构造器 | https://www.cnblogs.com/nxopen2018/p/11116261.html |
UF_UI_select_feature特征选择对话框 | https://www.cnblogs.com/nxopen2018/p/11116292.html |
UF_UI_select_parameters参数选择对话框 | https://www.cnblogs.com/nxopen2018/p/11116303.html |
UF_UI_select_point_collection点收集器 | https://www.cnblogs.com/nxopen2018/p/11116313.html |
UF_UI_select_sketch选择草图对话框 | https://www.cnblogs.com/nxopen2018/p/11116319.html |
UF_UI_select_sketch_dimensions拾取草图尺寸对话框 | https://www.cnblogs.com/nxopen2018/p/11116326.html |
UF_UI_select_with_class_dialog按类选择对话框 | https://www.cnblogs.com/nxopen2018/p/11116335.html |
UF_UI_select_with_single_dialog单对象选择对话框 | https://www.cnblogs.com/nxopen2018/p/11116342.html |
UF_UI_specify_plane拾取平面对话框 | https://www.cnblogs.com/nxopen2018/p/11116350.html |
UF_UI_specify_screen_position拾取屏幕位置 | https://www.cnblogs.com/nxopen2018/p/11116357.html |
UF_UI_specify_vector拾取向量对话框 | https://www.cnblogs.com/nxopen2018/p/11116366.html |
UF_UI_get_default_parent获取UG界面窗口句柄 | https://www.cnblogs.com/nxopen2018/p/11191411.html |
UF_UI_open_part打开part对话框 | https://www.cnblogs.com/nxopen2018/p/11191525.html |
UF_UI_save_listing_window将信息窗口中的文本保存到文本文件中 | https://www.cnblogs.com/nxopen2018/p/11191563.html |
UF_UI_exit_listing_window清除信息窗口中的内容,退出信息窗口 | https://www.cnblogs.com/nxopen2018/p/11191607.html |
UF_UI_close_listing_window关闭信息窗口 | https://www.cnblogs.com/nxopen2018/p/11191621.html |
UF_UI_is_listing_window_open查询信息窗口是否打开 | https://www.cnblogs.com/nxopen2018/p/11191641.html |
UF_MB_ask_button_id获取按钮的ID | https://www.cnblogs.com/nxopen2018/p/11192026.html |
UF_MB_ask_toggle_state获取切换按钮的当前状态 | https://www.cnblogs.com/nxopen2018/p/11192038.html |
UF_UI_create_toolbar创建经典工具栏 | https://www.cnblogs.com/nxopen2018/p/11192043.html |
UF_UI_set_toolbar_vis设置经典工具栏的可见性 | https://www.cnblogs.com/nxopen2018/p/11192048.html |
UF_UI_create_ribbon创建功能区工具栏 | https://www.cnblogs.com/nxopen2018/p/11192052.html |
UF_UI_set_ribbon_vis设置功能区工具栏的可见性 | https://www.cnblogs.com/nxopen2018/p/11192061.html |
UF_UI_remove_toolbar删除经典工具栏 | https://www.cnblogs.com/nxopen2018/p/11192065.html |
UF_UI_remove_ribbon删除功能区工具栏 | https://www.cnblogs.com/nxopen2018/p/11192072.html |
uc1600字符串对话框 | https://www.cnblogs.com/nxopen2018/p/11342774.html |
UF_UI_lock_ug_access对话框加锁 | https://www.cnblogs.com/nxopen2018/p/11123284.html |
UF_UI_unlock_ug_access对话框解锁 | https://www.cnblogs.com/nxopen2018/p/11123290.html |
UF_DISP_set_highlight高亮显示对象 | https://www.cnblogs.com/nxopen2018/p/10957188.html |
UF_DRF_create_note创建工程图注释 | https://www.cnblogs.com/nxopen2018/p/10957200.html |
UF_DRF_create_image_from_file工程图插入PNG图片 | https://www.cnblogs.com/nxopen2018/p/11116217.html |
UF_DRF_set_image_height设置工程图PNG图片高度 | https://www.cnblogs.com/nxopen2018/p/11116226.html |
UF_DRF_set_image_width设置工程图PNG图片长度 | https://www.cnblogs.com/nxopen2018/p/11116236.html |
UF_DRF_ask_dim_info获取工程图尺寸的值 | https://www.cnblogs.com/nxopen2018/p/11134561.html |
uc5566更改图纸尺寸内容(编辑文本) | https://www.cnblogs.com/nxopen2018/p/11134669.html |
UF_DRF_ask_appended_text获取尺寸的附加文本 | https://www.cnblogs.com/nxopen2018/p/11134882.html |
UF_DRF_set_appended_text设置尺寸的附加尺寸 | https://www.cnblogs.com/nxopen2018/p/11135106.html |
UF_DRF_ask_origin获得制图中对象的坐标点 | https://www.cnblogs.com/nxopen2018/p/11147688.html |
UF_DRF_add_controlling_exp创建图纸尺寸表达式抑制 | https://www.cnblogs.com/nxopen2018/p/11203963.html |
UF_DRF_ask_controlling_exp获得图纸抑制尺寸的表达式 | https://www.cnblogs.com/nxopen2018/p/11204072.html |
UF_DRF_ask_text_data读取工程图注释 | https://www.cnblogs.com/nxopen2018/p/11619880.html |
UF_DRF_ask_ann_data询问注释对象的数据 | https://www.cnblogs.com/nxopen2018/p/11619884.html |
UF_DRF_ask_dimension_text读取图纸尺寸的值 | https://www.cnblogs.com/nxopen2018/p/12006281.html |
UF_DRAW_create_drawing新建工程图 | https://www.cnblogs.com/nxopen2018/p/10957650.html |
UF_DRAW_open_drawing打开工程图 | https://www.cnblogs.com/nxopen2018/p/10957672.html |
UF_DRAW_rename_drawing重命名工程图 | https://www.cnblogs.com/nxopen2018/p/10957668.html |
UF_DRAW_delete_drawing删除工程图 | https://www.cnblogs.com/nxopen2018/p/10957665.html |
UF_DRAW_ask_drawings获取图纸页的数量和tag | https://www.cnblogs.com/nxopen2018/p/10957662.html |
UF_DRAW_ask_drawing_info获取工程图详细信息 | https://www.cnblogs.com/nxopen2018/p/10957658.html |
UF_DRAW_ask_current_drawing返回当前图纸页的Tag | https://www.cnblogs.com/nxopen2018/p/10957654.html |
UF_DRAW_import_view工程图导入视图 | https://www.cnblogs.com/nxopen2018/p/10957643.html |
UF_DRAW_initialize_view_info工程图初始化视图信息 | https://www.cnblogs.com/nxopen2018/p/10957641.html |
UF_DRAW_update_one_view工程图更新视图 | https://www.cnblogs.com/nxopen2018/p/10957635.html |
UF_DRAW_add_orthographic_view添加工程图投影视图 | https://www.cnblogs.com/nxopen2018/p/10957630.html |
UF_DRAW_ask_border_color获取工程图视图边界线颜色 | https://www.cnblogs.com/nxopen2018/p/11116108.html |
UF_DRAW_ask_border_display获取工程图视图边界线是否显示 | https://www.cnblogs.com/nxopen2018/p/11116120.html |
UF_DRAW_ask_drawing_of_view由工程图视图tag获取图纸页tag | https://www.cnblogs.com/nxopen2018/p/11116131.html |
UF_DRAW_rename_drawing重命名图纸页 | https://www.cnblogs.com/nxopen2018/p/11116145.html |
UF_DRAW_ask_num_drawings获得图纸页数量 | https://www.cnblogs.com/nxopen2018/p/11116157.html |
UF_DRAW_ask_num_views获得当前图纸页有多少个视图 | https://www.cnblogs.com/nxopen2018/p/11116167.html |
UF_DRAW_move_view移动工程图视图 | https://www.cnblogs.com/nxopen2018/p/11116175.html |
UF_DRAW_set_view_scale更改视图比例大小 | https://www.cnblogs.com/nxopen2018/p/11116184.html |
UF_DRAW_set_border_display设置视图边界线显示隐藏 | https://www.cnblogs.com/nxopen2018/p/11116189.html |
UF_DRAW_ask_views获取工程图所有视图 | https://www.cnblogs.com/nxopen2018/p/11116196.html |
UF_DRAW_move_view_to_drawing移动工程图视图到另一个图纸页 | https://www.cnblogs.com/nxopen2018/p/11116208.html |
UF_DRAW_set_drawing_info更改图纸页比例 | https://www.cnblogs.com/nxopen2018/p/11116213.html |
UF_DRAW_ask_view_borders获取图纸视图最大边界和视图中心点 | https://www.cnblogs.com/nxopen2018/p/11675895.html |
UF_STD_put_solid_in_stl_file将实体放入STL文件中 | https://www.cnblogs.com/nxopen2018/p/10957264.html |
UF_STD_open_binary_stl_file| 打开二进制STL文件 | https://www.cnblogs.com/nxopen2018/p/10957273.html |
UF_STD_close_stl_file| 关闭STL文件 | https://www.cnblogs.com/nxopen2018/p/10957270.html |
UF_EVAL_ask_line直线分析函数 | https://www.cnblogs.com/nxopen2018/p/10957196.html |
UF_OBJ_cycle_objs_in_part遍历函数 | https://www.cnblogs.com/nxopen2018/p/10957343.html |
UF_OBJ_cycle_all遍历函数 | https://www.cnblogs.com/nxopen2018/p/10957347.html |
UF_OBJ_set_name设置对象名称函数 | https://www.cnblogs.com/nxopen2018/p/10957352.html |
UF_OBJ_set_translucency| 设置透明度 | https://www.cnblogs.com/nxopen2018/p/10957339.html |
UF_OBJ_is_displayable| 获取显示在NX交互界面的对象 | https://www.cnblogs.com/nxopen2018/p/10957330.html |
UF_OBJ_ask_type_and_subtype查询对象的类型和子类型 | https://www.cnblogs.com/nxopen2018/p/10957335.html |
UF_OBJ_ask_display_properties获取对象的显示属性(图层,颜色,空白状态,线宽,字体,高亮状态) | https://www.cnblogs.com/nxopen2018/p/10957334.html |
UF_OBJ_delete_object删除对象 | https://www.cnblogs.com/nxopen2018/p/10957327.html |
UF_OBJ_set_blank_status隐藏对象 | https://www.cnblogs.com/nxopen2018/p/10957326.html |
UF_OBJ_cycle_by_name遍历名字 | https://www.cnblogs.com/nxopen2018/p/10957320.html |
UF_OBJ_cycle_by_name_and_type按类型遍历名字获取Tag | https://www.cnblogs.com/nxopen2018/p/10957315.html |
UF_OBJ_set_layer将对象移动到图层 | https://www.cnblogs.com/nxopen2018/p/11147823.html |
UF_OBJ_set_font设置对象线型 | https://www.cnblogs.com/nxopen2018/p/11821414.html |
UF_MTX3_initialize输入X向量Y向量输出一个3*3矩阵 | https://www.cnblogs.com/nxopen2018/p/10957219.html |
UF_PART_import导入部件/导入图框 | https://www.cnblogs.com/nxopen2018/p/10957234.html |
UF_PART_ask_display_part获取当前显示部件的TAG | https://www.cnblogs.com/nxopen2018/p/10957226.html |
UF_PART_ask_part_name获取当前part所在路径 | https://www.cnblogs.com/nxopen2018/p/11147840.html |
UF_VEC3_distance计算两点距离 | https://www.cnblogs.com/nxopen2018/p/10957249.html |
UF_VEC3_angle_between已知两个向量方向求夹角角度 | https://www.cnblogs.com/nxopen2018/p/10957257.html |
UF_VEC3_cross求两个向量的叉乘 | https://www.cnblogs.com/nxopen2018/p/10957253.html |
UF_VIEW_fit_view适应窗口 | https://www.cnblogs.com/nxopen2018/p/10957192.html |
UF_VIEW_rotate_view旋转视图 | https://www.cnblogs.com/nxopen2018/p/10981643.html |
UF_VIEW_map_model_to_drawing将建模绝对空间中的点映射到工程图坐标 | https://www.cnblogs.com/nxopen2018/p/11811290.html |
UF_VIEW_map_drawing_to_model将工程图中的点坐标映射到建模绝对坐标 | https://www.cnblogs.com/nxopen2018/p/11811295.html |
UF_MODL_create_block创建块 | https://www.cnblogs.com/nxopen2018/p/10975928.html | |
UF_MODL_create_block1创建块 | https://www.cnblogs.com/nxopen2018/p/10975844.html | |
UF_MODL_create_cyl1创建圆柱 | https://www.cnblogs.com/nxopen2018/p/10975966.html | |
UF_MODL_create_sphere1创建球 | https://www.cnblogs.com/nxopen2018/p/10975998.html | |
UF_MODL_create_cone1创建圆锥 | https://www.cnblogs.com/nxopen2018/p/10975973.html | |
UF_MODL_create_extruded拉伸 | https://www.cnblogs.com/nxopen2018/p/10975827.html | |
UF_MODL_create_mirror_body创建镜像体 | https://www.cnblogs.com/nxopen2018/p/10975868.html | |
UF_MODL_create_fixed_dplane创建固定的基准平面 | https://www.cnblogs.com/nxopen2018/p/10975818.html | |
UF_MODL_create_extruded2拉伸 | https://www.cnblogs.com/nxopen2018/p/10975861.html | |
UF_MODL_create_list创建链表 | https://www.cnblogs.com/nxopen2018/p/10975782.html | |
UF_MODL_put_list_item将对象添加到链表 | https://www.cnblogs.com/nxopen2018/p/10975782.html | |
UF_MODL_ask_list_count查询链表数量 | https://www.cnblogs.com/nxopen2018/p/10975782.html | |
UF_MODL_ask_list_item获取链表里的所有对象 | https://www.cnblogs.com/nxopen2018/p/10975782.html | |
UF_MODL_delete_list_item删除链表的对象 | https://www.cnblogs.com/nxopen2018/p/10975782.html | |
UF_MODL_delete_list删除链表 | https://www.cnblogs.com/nxopen2018/p/10975782.html | |
UF_MODL_ask_feat_body特征找体 | https://www.cnblogs.com/nxopen2018/p/10975824.html | |
UF_MODL_ask_body_faces体找面 | https://www.cnblogs.com/nxopen2018/p/10975876.html | |
UF_MODL_ask_face_data获取面的法向向量 | https://www.cnblogs.com/nxopen2018/p/10975830.html | |
UF_MODL_ask_feat_body特征找体 | https://www.cnblogs.com/nxopen2018/p/10975836.html | |
UF_MODL_ask_feat_edges特征找边 | https://www.cnblogs.com/nxopen2018/p/10975836.html | |
UF_MODL_ask_feat_direction特征找方向 | https://www.cnblogs.com/nxopen2018/p/10975836.html | |
UF_MODL_ask_feat_faces特征找面 | https://www.cnblogs.com/nxopen2018/p/10975836.html | |
UF_MODL_ask_feat_name获取特征的时间戳记名字 | https://www.cnblogs.com/nxopen2018/p/10975836.html | |
UF_MODL_ask_edge_verts获取边的端点 | https://www.cnblogs.com/nxopen2018/p/10975840.html | |
UF_MODL_ask_face_loops查询面的边界 | https://www.cnblogs.com/nxopen2018/p/10975819.html | |
UF_MODL_ask_loop_list_count查询面的边界链表数量 | https://www.cnblogs.com/nxopen2018/p/10975819.html | |
UF_MODL_ask_loop_list_item查询面的边界类型 | https://www.cnblogs.com/nxopen2018/p/10975819.html | |
UF_MODL_trace_a_ray发射线函数 | https://www.cnblogs.com/nxopen2018/p/10975777.html | |
UF_MODL_ask_sphere_parms获取球的参数 | https://www.cnblogs.com/nxopen2018/p/10975991.html | |
UF_MODL_ask_block_parms获取块的参数 | https://www.cnblogs.com/nxopen2018/p/10975981.html | |
UF_MODL_ask_cylinder_parms获取圆柱的参数 | https://www.cnblogs.com/nxopen2018/p/10975975.html | |
UF_MODL_ask_cone_parms获取圆锥参数 | https://www.cnblogs.com/nxopen2018/p/10975973.html | |
UF_MODL_create_blend| 创建倒圆 | https://www.cnblogs.com/nxopen2018/p/10975958.html | |
UF_MODL_create_chamfer创建倒角 | https://www.cnblogs.com/nxopen2018/p/10975954.html | |
UF_MODL_create_plane创建基准平面 | https://www.cnblogs.com/nxopen2018/p/10975950.html | |
UF_MODL_create_bsurf创建B面 | https://www.cnblogs.com/nxopen2018/p/10975923.html | |
UF_MODL_create_exp创建表达式(无TAG) | https://www.cnblogs.com/nxopen2018/p/10975947.html | |
UF_MODL_create_exp_tag创建表达式(有TAG) | https://www.cnblogs.com/nxopen2018/p/10975942.html | |
UF_MODL_ask_exp输入表达式名称,获取它的名称和值 | https://www.cnblogs.com/nxopen2018/p/10975937.html | |
UF_MODL_ask_exps_of_feature输入特征TAG,获取特征所有表达式TAG和个数 | https://www.cnblogs.com/nxopen2018/p/10975934.html | |
UF_MODL_ask_exps_of_part输入Part的TAG,获取整个部件表达式的TAG和表达式个数 | https://www.cnblogs.com/nxopen2018/p/10975933.html | |
UF_MODL_ask_exp_tag_string输入表达式TAG,得到表达式字符串 | https://www.cnblogs.com/nxopen2018/p/10975910.html | |
UF_MODL_ask_exp_tag_value输入表达式TAG,得到表达式值 | https://www.cnblogs.com/nxopen2018/p/10975905.html | |
UF_MODL_ask_minimum_dist求两个对象最短距离 | https://www.cnblogs.com/nxopen2018/p/10975886.html | |
UF_MODL_ask_bounding_box求对象的最大边界框 | https://www.cnblogs.com/nxopen2018/p/10975871.html | |
UF_MODL_ask_body_type查询体的类型为实体还是片体 | https://www.cnblogs.com/nxopen2018/p/10975898.html | |
UF_MODL_create_revolved创建旋转 | https://www.cnblogs.com/nxopen2018/p/10975808.html | |
UF_MODL_intersect_objects获取两个对象的交点 | https://www.cnblogs.com/nxopen2018/p/10975804.html | |
UF_MODL_ask_distance_tolerance获取建模的长度公差 | https://www.cnblogs.com/nxopen2018/p/10975802.html | |
UF_MODL_ask_angle_tolerance获取建模的角度公差 | https://www.cnblogs.com/nxopen2018/p/10975799.html | |
UF_MODL_create_bplane创建有界平面 | https://www.cnblogs.com/nxopen2018/p/10975794.html | |
UF_MODL_ask_point_containment获取一个点是在体(面,边)的边界内部,外部,还是边界上 | https://www.cnblogs.com/nxopen2018/p/10975789.html | |
UF_MODL_ask_adjac_faces获取相邻面 | https://www.cnblogs.com/nxopen2018/p/10975785.html | |
UF_MODL_ask_edge_smoothness获取边的光顺性(找相切面) | https://www.cnblogs.com/nxopen2018/p/11070051.html | |
UF_MODL_create_set_of_feature建模创建特征组 |
https://www.cnblogs.com/nxopen2018/p/11013213.html | |
UF_MODL_ask_face_parm获取点在面上U,V方向的位置 |
https://www.cnblogs.com/nxopen2018/p/11722742.html | |
UF_MODL_ask_face_props获取点在面上的向量方向 | https://www.cnblogs.com/nxopen2018/p/11722750.html | |
UF_MODL_import_exp导入表达式 | https://www.cnblogs.com/nxopen2018/p/11853239.html | |
UF_MODL_ask_body_edges体找边 | https://www.cnblogs.com/nxopen2018/p/11853549.html | |
UF_MODL_ask_edge_type获得边的类型 | https://www.cnblogs.com/nxopen2018/p/11853556.html | |
UF_MODL_unite_bodies_with_retained_options相加布尔操作,可保留或删除目标体,工具体 | https://www.cnblogs.com/nxopen2018/p/11991869.html | |
UF_MODL_trim_body修剪体 | https://www.cnblogs.com/nxopen2018/p/11991916.html |
UF_CGM_export_cgm将工程图转成CGM和PDF | https://www.cnblogs.com/nxopen2018/p/10952612.html |
UF_CGM_ask_default_export_options获取NX系统默认导出CGM的选项设置 | https://www.cnblogs.com/nxopen2018/p/10957402.html |
UF_CGM_ask_session_export_options获取当前导出CGM选项设置 | https://www.cnblogs.com/nxopen2018/p/10957394.html |
UF_CGM_set_session_export_options修改当前导出CGM文件选项设置 | https://www.cnblogs.com/nxopen2018/p/10957390.html |
UF_TABNOT_ask_tabular_note_of_section工程图表格注释section转tag | https://www.cnblogs.com/nxopen2018/p/10957375.html |
UF_TABNOT_ask_nth_row工程图表格注释获取某一行的tag函数 | https://www.cnblogs.com/nxopen2018/p/10957366.html |
UF_TABNOT_ask_nth_column工程图表格注释获取某一列的tag函数 | https://www.cnblogs.com/nxopen2018/p/10957379.html |
UF_TABNOT_ask_cell_at_row_col工程图表格注释获取某一行某一列的tag函数 | https://www.cnblogs.com/nxopen2018/p/10957361.html |
UF_TABNOT_set_cell_text工程图表格注释写入文本内容 | https://www.cnblogs.com/nxopen2018/p/10957358.html |
UF_TABNOT_ask_default_cell_prefs工程图表格注释检索默认单元格首选项 | https://www.cnblogs.com/nxopen2018/p/10957372.html |
UF_TABNOT_set_cell_prefs工程图表格注释设置单元格首选项 | https://www.cnblogs.com/nxopen2018/p/10957385.html |
UF_ASSEM_ask_component_data获取装配部件的相关信息 | https://www.cnblogs.com/nxopen2018/p/11342916.html |
UF_ASSEM_use_alternate替换组件 | https://www.cnblogs.com/nxopen2018/p/11343137.html |
UF_ASSEM_substitute_component替换组件 | https://www.cnblogs.com/nxopen2018/p/11343171.html |
UF_LAYER_set_many_layers_status批量操作图层状态 | https://www.cnblogs.com/nxopen2018/p/11848033.html |
UF_LAYER_set_all_but_work设置除工作层之外的所有图层的状态 | https://www.cnblogs.com/nxopen2018/p/11848023.html |
UF_LAYER_ask_status获取图层的状态 | https://www.cnblogs.com/nxopen2018/p/11848012.html |
UF_LAYER_ask_category_info获取图层类别的信息 | https://www.cnblogs.com/nxopen2018/p/11847997.html |
UF_LAYER_ask_category_tag获取一个图层类别的tag | https://www.cnblogs.com/nxopen2018/p/11847970.html |
UF_LAYER_create_category创建图层类别 | https://www.cnblogs.com/nxopen2018/p/11853299.html |
UF_LAYER_edit_category_name编辑图层类别名字 | https://www.cnblogs.com/nxopen2018/p/11853333.html |
UF_LAYER_edit_category_descr编辑图层类别描述 | https://www.cnblogs.com/nxopen2018/p/11853346.html |
UF_LAYER_edit_category_layer编辑添加哪些图层 | https://www.cnblogs.com/nxopen2018/p/11853361.html |
UF_LAYER_cycle_by_layer遍历图层 | https://www.cnblogs.com/nxopen2018/p/11853384.html |
https://www.cnblogs.com/nxopen2018/category/1597944.html |
|UF_ABORT| 进度中断检测|
|UF_ATTR| 对象属性类型|
|UF_BOUND| 边界类型|
|UF_BREP| 边界表示|
|UF_CAM| CAM模块|
|UF_CLEAR| 间隙分析|
|UF_CLONE| 装配与PDM|
|UF_DBC_MLD| 铸模相关|
|UF_DEFS| 链表相关|
|UF_DIEENG| 原型和说明|
|UF_DIEENG| 原型和说明|
|UF_DIRPATH| 目录和路径|
|UF_DPUD| CAM设置与查询|
|UF_DRPOS| CAM编程相关|
|UF_EPLIB_TYPES| 程序库|
|UF_EXIT| 用户出口|
|UF_FACET| 面与片体|
|UF_FAM| 零件族|
|UF_FLTR| 区域与过滤器|
|UF_FORGEO| 定义特殊的面|
|UF_FORGEO| 定义特殊的面|
|UF_GDT| 几何尺寸公差查询|
|UF_GENT| 旧的命名约定|
|UF_GEXP | 几何表达式|
|UF_GROUP| 群组相关|
|UF_HELP| 帮助相关|
|UF_KF| 知识融合|
|UF_LAYOUT |布局相关|
|UF_LIB|查询对象库|
|UF_LINKED_EXTERIOR|外部链接|
|UF_MB|查询与MenScript|
|UF_MOM|扩展解释器|
|UF_MOTION|干涉测量轨迹|
|UF_NCGROUP|CAM NC相关|
|UF_NX2D|2D平面几何|
|UF_NXSM|编辑查询钣金|
|UF_OBJECT_TYPES|NX对象与结构|
|UF_OPER|NC加工相关|
|UF_PARAM|加工参数控制|
|UF_PATH|创建刀具路径|
|UF_PATT|提供访问NX子程序|
|UF_PD||
|UF_PLIST|零件清单功能|
|UF_PLOT|NX绘图|
|UF_POINT|关联点创建|
|UF_PROCESS_AID|制造工艺|
|UF_PS|Parasolid相关的信息|
|UF_ROUTE|管线设计相关|
|UF_RULE|接口设计准则|
|UF_SC|容器与构建器|
|UF_SCOP|表面轮廓加工|
|UF_SETUP|NC加工相关|
|UF_SF|渲染有限元|
|UF_SIM|数据类型S&V|
|UF_SKET|草绘接口|
|UF_SMD |钣金设计模块|
|UF_SO|智能对象公共接口|
|UF_SPSD|仿真流程|
|UF_STUDIO|自由曲面|
|UF_STYLER|UIStyler对话框|
|UF_SUBDIV|subdiv功能|
|UF_SURF_REG|表面区域|
|UF_TEXT|TEXT相关|
|UF_TRNS|变换相关|
|UF_UDOP|用户自定义操作|
|UF_UGFONT|字库信息功能|
|UF_UGMGR|NX管理器|
|UF_UI_XT|对话框激活|
|UF_UNDO|数据定义|
|UF_UNIT|单位相关|
|UF_VDAC|VDA检测器|
|UF_WAVE|延迟更新控制|
|UF_WEB|WEB相关|
|UF_WEIGHT|重量管理方案|
|UF_WELD|焊接Assistant|
|UF_XS|电子表格|