超声波程序修改

刚刚接触树莓派的时候去网上查的代码分享给大家： 

#导入 GPIO库
import RPi.GPIO as GPIO
import time
 
#设置 GPIO 模式为 BCM
GPIO.setmode(GPIO.BCM)
 
#定义 GPIO 引脚
GPIO_TRIGGER = 23
GPIO_ECHO = 24
 
#设置 GPIO 的工作方式 (IN / OUT)
GPIO.setup(GPIO_TRIGGER, GPIO.OUT)
GPIO.setup(GPIO_ECHO, GPIO.IN)
 
def distance():
    # 发送高电平信号到 Trig 引脚
    GPIO.output(GPIO_TRIGGER, True)
 
    # 持续 10 us 
    time.sleep(0.00001)
    GPIO.output(GPIO_TRIGGER, False)
 
    start_time = time.time()
    stop_time = time.time()
 
    # 记录发送超声波的时刻1
    while GPIO.input(GPIO_ECHO) == 0:
        start_time = time.time()
 
    # 记录接收到返回超声波的时刻2
    while GPIO.input(GPIO_ECHO) == 1:
        stop_time = time.time()
 
    # 计算超声波的往返时间 = 时刻2 - 时刻1
    time_elapsed = stop_time - start_time
    # 声波的速度为 343m/s， 转化为 34300cm/s。
    distance = (time_elapsed * 34300) / 2
 
    return distance
 
if __name__ == '__main__':
    try:
        while True:
            dist = distance()
            print("Measured Distance = {:.2f} cm".format(dist))
            time.sleep(1)
 
        # Reset by pressing CTRL + C
    except KeyboardInterrupt:
        print("Measurement stopped by User")
        GPIO.cleanup()

 

出自：https://me.csdn.net/weixin_43073852