20200614在ubuntu20.04的本地编译全志R系列的步骤20

在ubuntu20.04的本地编译全志R系列的步骤20
2020/6/14 14 7:51 开始写
2020/6/14 14 14:48 完工

0、获取全志R系列的Android源码包：
请通过渠道/代理商/方案公司获取全志R系列的Android源码包。

1、安装ubuntu
已经验证过的系统：ubuntu-14.04-desktop-amd64.iso
ubuntu的官方下载地址（喜欢中文优化版本的，可以选择麒麟版本）：
http://releases.ubuntu.com/releases/20.04/
http://cdimage.ubuntu.com/releases/
http://old-releases.ubuntu.com/releases/lucid/
http://cn.ubuntu.com/
http://www.ubuntukylin.com/
https://www.ubuntu.com/download/ubuntu-kylin

如果没有特殊理由，推荐使用ubuntu长期支持的版本（LTS版本）比如：
ubuntu-20.04-desktop-amd64.iso    2020-04-23 07:52    2.5G    Desktop image for 64-bit PC (AMD64) computers (standard download)

安装Ubuntu的教程请参考：
http://digi.163.com/11/0127/18/6RE3LQL400162OUT.html
图文教程：手把手教你用U盘安装Ubuntu

http://www.linuxidc.com/Linux/2012-11/74695.htm
U盘安装Ubuntu 12.10

http://jingyan.baidu.com/article/a3761b2b66fe141577f9aa51.html
怎么用u盘安装ubuntu

手动分区的建议设置：
/boot  内核启动分区。建议分配500MB，不建议低于100MB。
swap   交换分区。建议：8192MB，不建议低于4096MB。
/home  home分区，建议为剩下的容量-50GB（/分区的容量）
/      根分区，注意这里需要设置为主分区！！！！建议50GB，不小于20GB。

小知识：
查看ubuntu的版本：
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ cat /etc/issue
Ubuntu 20.04 LTS \n \l

rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ uname -a
Linux rootroot-HP-ZHAN-66-Pro-A-14-G3 5.4.0-37-generic #41-Ubuntu SMP Wed Jun 3 18:57:02 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 

http://www.360doc.com/content/13/0921/23/6496277_316103639.shtml
查看ubuntu是32位还是64位的方法及其版本号 

http://www.cnblogs.com/zero1665/archive/2010/05/24/1742962.html
查看ubuntu版本号

获取当前电脑配置的IP地址：
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ ifconfig
enp1s0: flags=4163  mtu 1500
        inet 192.168.186.206  netmask 255.255.255.0  broadcast 192.168.186.255
        inet6 fe80::19ca:5fb:e795:9d47  prefixlen 64  scopeid 0x20
        ether b0:5c:da:21:3a:e5  txqueuelen 1000  (Ethernet)
        RX packets 189714  bytes 260336999 (260.3 MB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 98817  bytes 9265147 (9.2 MB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 2952  bytes 451064 (451.0 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2952  bytes 451064 (451.0 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlp2s0: flags=4163  mtu 1500
        inet 192.168.186.204  netmask 255.255.255.0  broadcast 192.168.186.255
        inet6 fe80::f109:85c9:1b56:8cf7  prefixlen 64  scopeid 0x20
        ether b8:9a:2a:d2:ac:df  txqueuelen 1000  (Ethernet)
        RX packets 76966  bytes 111583331 (111.5 MB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 23182  bytes 2136601 (2.1 MB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ lshw -C network
WARNING: you should run this program as super-user.
  *-network                 
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:01:00.0
       logical name: enp1s0
       version: 15
       serial: b0:5c:da:21:3a:e5
       size: 100Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 duplex=full firmware=rtl8168h-2_0.0.2 02/26/15 ip=192.168.186.206 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
       resources: irq:51 ioport:3000(size=256) memory:e0a04000-e0a04fff memory:e0a00000-e0a03fff
  *-network
       description: Wireless interface
       product: Wi-Fi 6 AX200
       vendor: Intel Corporation
       physical id: 0
       bus info: pci@0000:02:00.0
       logical name: wlp2s0
       version: 1a
       serial: b8:9a:2a:d2:ac:df
       width: 64 bits
       clock: 33MHz
       capabilities: bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=iwlwifi driverversion=5.4.0-37-generic firmware=48.4fa0041f.0 ip=192.168.186.204 latency=0 link=yes multicast=yes wireless=IEEE 802.11
       resources: irq:51 memory:e0900000-e0903fff
WARNING: output may be incomplete or inaccurate, you should run this program as super-user.
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 

2、全志R系列的android的环境搭建：
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ sudo passwd root
[sudo] password for rootroot: 
New password: 
Retype new password: 
passwd: password updated successfully
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 

（1）更新
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ sudo apt-get upgrade
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
The following packages have been kept back:
  ubuntu-desktop ubuntu-desktop-minimal ubuntu-drivers-common
0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ sudo apt-get update
Get:1 http://security.ubuntu.com/ubuntu focal-security InRelease [107 kB]
Get:2 http://security.ubuntu.com/ubuntu focal-security/main amd64 DEP-11 Metadata [18.7 kB]
Get:3 http://security.ubuntu.com/ubuntu focal-security/universe amd64 DEP-11 Metadata [31.5 kB]
Hit:4 http://cn.archive.ubuntu.com/ubuntu focal InRelease
Get:5 http://cn.archive.ubuntu.com/ubuntu focal-updates InRelease [107 kB]
Get:6 http://cn.archive.ubuntu.com/ubuntu focal-backports InRelease [98.3 kB]                                                                                                                                                                                                
Get:7 http://cn.archive.ubuntu.com/ubuntu focal-updates/main amd64 DEP-11 Metadata [103 kB]                                                                                                                                                                                  
Get:8 http://cn.archive.ubuntu.com/ubuntu focal-updates/universe amd64 Packages [106 kB]                                                                                                                                                                                     
Get:9 http://cn.archive.ubuntu.com/ubuntu focal-updates/universe amd64 DEP-11 Metadata [151 kB]                                                                                                                                                                              
Get:10 http://cn.archive.ubuntu.com/ubuntu focal-backports/universe amd64 DEP-11 Metadata [532 B]                                                                                                                                                                            
Fetched 722 kB in 8s (86.6 kB/s)                                                                                                                                                                                                                                             
Reading package lists... Done
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 

（2）
首先安装openssh-server，这样就可以在Windows下通过SSH软件连接Ubuntu的电脑操作了。
sudo apt-get install openssh-server

rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ sudo apt-get install openssh-server
Reading package lists... Done
Building dependency tree       
Reading state information... Done
openssh-server is already the newest version (1:8.2p1-4).
0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ ps -e | grep ssh
   1435 ?        00:00:00 ssh-agent
   4864 ?        00:00:00 sshd
   5911 ?        00:00:00 sshd
   6047 ?        00:00:00 sshd
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ op
openssl    open    openvt     opldecode  
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ op
openssl    open    openvt     opldecode  
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ ss
ss                ssh               ssh-add           ssh-agent         ssh-argv0         ssh-copy-id       sshd              ssh-import-id     ssh-import-id-gh  ssh-import-id-lp  ssh-keygen        ssh-keyscan       
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ ss
ss                ssh               ssh-add           ssh-agent         ssh-argv0         ssh-copy-id       sshd              ssh-import-id     ssh-import-id-gh  ssh-import-id-lp  ssh-keygen        ssh-keyscan       
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ sshd -verison
unknown option -- v
OpenSSH_8.2p1 Ubuntu-4, OpenSSL 1.1.1f  31 Mar 2020
usage: sshd [-46DdeiqTt] [-C connection_spec] [-c host_cert_file]
            [-E log_file] [-f config_file] [-g login_grace_time]
            [-h host_key_file] [-o option] [-p port] [-u len]
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ openssl -version
Invalid command '-version'; type "help" for a list.
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ openssl -v
Invalid command '-v'; type "help" for a list.
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ openssl --version
Invalid command '--version'; type "help" for a list.
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 

（3）
安装samba：
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ sudo apt-get install samba
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ samba --version
Version 4.11.6-Ubuntu
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ ps -e | grep smb
   7366 ?        00:00:00 smbd
   7368 ?        00:00:00 smbd-notifyd
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ cd /etc/samba/
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/etc/samba$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/etc/samba$ ll
total 36
drwxr-xr-x   3 root root  4096 6月  14 08:08 ./
drwxr-xr-x 131 root root 12288 6月  14 08:08 ../
-rw-r--r--   1 root root     8 5月   1 03:17 gdbcommands
-rw-r--r--   1 root root  8942 6月  14 08:08 smb.conf
drwxr-xr-x   2 root root  4096 5月   1 03:17 tls/
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/etc/samba$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/etc/samba$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/etc/samba$ sudo cp smb.conf smb.conf.bak1
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/etc/samba$ 

你可以通过vi在root权限下直接修改。
我是通过WinSCP5.15.9将smb.conf拷贝到Win7的C盘下改好了再拷贝回去的！

rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/etc/samba$ cp smb.conf ~
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/etc/samba$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/etc/samba$ cd ~
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ ll
total 2008196
drwxr-xr-x 16 rootroot rootroot       4096 6月  14 08:13 ./
drwxr-xr-x  4 root     root           4096 6月  13 11:56 ../
-rw-------  1 rootroot rootroot        289 6月  13 12:46 .bash_history
-rw-r--r--  1 rootroot rootroot        220 6月  13 11:56 .bash_logout
-rw-r--r--  1 rootroot rootroot       3771 6月  13 11:56 .bashrc
drwx------ 14 rootroot rootroot       4096 6月  14 08:01 .cache/
drwxr-xr-x 13 rootroot rootroot       4096 6月  13 12:46 .config/
drwxr-xr-x  2 rootroot rootroot       4096 6月  13 12:05 Desktop/
drwxr-xr-x  2 rootroot rootroot       4096 6月  13 12:05 Documents/
drwxr-xr-x  2 rootroot rootroot       4096 6月  13 12:05 Downloads/
drwx------  3 rootroot rootroot       4096 6月  13 12:16 .gnupg/
drwxr-xr-x  3 rootroot rootroot       4096 6月  13 12:05 .local/
drwx------  5 rootroot rootroot       4096 6月  14 07:45 .mozilla/
drwxr-xr-x  2 rootroot rootroot       4096 6月  13 12:05 Music/
-rw-rw-r--  1 rootroot rootroot    8977887 6月  13 12:27 my_video-1.mkv
-rw-rw-r--  1 rootroot rootroot   35531753 6月  13 12:28 my_video-2.mkv
-rw-rw-r--  1 rootroot rootroot   45847173 6月  13 12:35 my_video-3.mkv
-rw-rw-r--  1 rootroot rootroot    5055327 6月  13 12:35 my_video-4.mkv
-rw-rw-r--  1 rootroot rootroot  809570438 6月  13 12:46 my_video-5.mkv
-rw-rw-r--  1 rootroot rootroot 1151287838 6月  14 08:13 my_video-6.mkv
drwxr-xr-x  2 rootroot rootroot       4096 6月  14 07:45 Pictures/
-rw-r--r--  1 rootroot rootroot        807 6月  13 11:56 .profile
drwxr-xr-x  2 rootroot rootroot       4096 6月  13 12:05 Public/
-rw-r--r--  1 rootroot rootroot       8942 6月  14 08:13 smb.conf
drwx------  2 rootroot rootroot       4096 6月  13 12:16 .ssh/
-rw-r--r--  1 rootroot rootroot          0 6月  13 12:17 .sudo_as_admin_successful
drwxr-xr-x  2 rootroot rootroot       4096 6月  13 12:05 Templates/
drwxr-xr-x  2 rootroot rootroot       4096 6月  13 12:05 Videos/
-rw-------  1 rootroot rootroot        154 6月  14 08:13 .Xauthority
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ sudo chmod 777 smb.conf 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ cd -
/etc/samba
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/etc/samba$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/etc/samba$ ll
total 48
drwxr-xr-x   3 root root  4096 6月  14 08:12 ./
drwxr-xr-x 131 root root 12288 6月  14 08:08 ../
-rw-r--r--   1 root root     8 5月   1 03:17 gdbcommands
-rw-r--r--   1 root root  8942 6月  14 08:08 smb.conf
-rw-r--r--   1 root root  8942 6月  14 08:12 smb.conf.bak1
drwxr-xr-x   2 root root  4096 5月   1 03:17 tls/
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/etc/samba$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/etc/samba$ sudo cp ~/smb.conf .
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/etc/samba$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/etc/samba$ ll
total 48
drwxr-xr-x   3 root root  4096 6月  14 08:12 ./
drwxr-xr-x 131 root root 12288 6月  14 08:08 ../
-rw-r--r--   1 root root     8 5月   1 03:17 gdbcommands
-rw-r--r--   1 root root  9148 6月  14 08:16 smb.conf
-rw-r--r--   1 root root  8942 6月  14 08:12 smb.conf.bak1
drwxr-xr-x   2 root root  4096 5月   1 03:17 tls/
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/etc/samba$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/etc/samba$ diff smb.conf smb.conf.bak1
219,230d218
< [rootroot]
<    comment=rootroot Shared Folder
<    path=/
<    #public=yes
<    writable=yes
<    #readonly=yes
<    valid users=rootroot
<    create mask=0700
<    directory mask=0700
<    available=yes
<    browseable=yes
< 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/etc/samba$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ sudo smbpasswd -a rootroot
New SMB password:
Retype new SMB password:
Added user rootroot.
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 

（4）
安装编译全志的android4所需要的软件：

安装前先看一下gcc/g++：
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/etc/samba$ cd ~
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ gcc -v

Command 'gcc' not found, but can be installed with:

sudo apt install gcc

rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ g++ -v

Command 'g++' not found, but can be installed with:

sudo apt install g++

rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 

正式安装：
sudo apt-get install git-core
sudo apt-get install gnupg
sudo apt-get install flex
sudo apt-get install bison
sudo apt-get install gperf
sudo apt-get install build-essential
sudo apt-get install zip
sudo apt-get install curl
sudo apt-get install libc6-dev
sudo apt-get install libncurses5-dev
sudo apt-get install x11proto-core-dev
sudo apt-get install libx11-dev:i386
sudo apt-get install libreadline6-dev:i386
sudo apt-get install libgl1-mesa-glx:i386
sudo apt-get install libgl1-mesa-dev
sudo apt-get install g++-multilib
sudo apt-get install mingw32
sudo apt-get install tofrodos
sudo apt-get install python-markdown
sudo apt-get install libxml2-utils
sudo apt-get install xsltproc
sudo apt-get install zlib1g-dev:i386
sudo apt-get install zlib1g-dev
sudo apt-get install lib32ncurses5-dev

sudo apt-get install lib32z1
sudo apt-get install libx11-dev
sudo apt-get install lib32z1-dev
sudo apt-get install libreadline6-dev
sudo apt-get install libgl1-mesa-glx

sudo apt-get install u-boot-tools
sudo apt-get install libssl-dev

3、安装其它开发工具  
3.1、安装代码比较工具  
sudo apt-get install meld

3.2、
http://www.cnblogs.com/kobe8/p/3998379.html
在Ubuntu14.04上编译Android4.0.1出现的几个问题 sudo apt-get install libswitch-perl 

（1）、 出错以下出错信息：
Import includes file: out/target/product/mx3/obj/STATIC_LIBRARIES/libwebcore_intermediates/import_includes  
target Generated: libwebcore <= external/webkit/Source/WebCore/css/tokenizer.flex  
Can't locate Switch.pm in @INC (you may need to install the Switch module) (@INC contains: /etc/perl /usr/local/lib/perl/5.18.2 /usr/local/share/perl/5.18.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.18 /usr/share/perl/5.18 /usr/local/lib/site_perl .) at external/webkit/Source/WebCore/make-hash-tools.pl line 23.  
BEGIN failed--compilation aborted at external/webkit/Source/WebCore/make-hash-tools.pl line 23.  
Can't locate Switch.pm in @INC (you may need to install the Switch module) (@INC contains: /etc/perl /usr/local/lib/perl/5.18.2 /usr/local/share/perl/5.18.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.18 /usr/share/perl/5.18 /usr/local/lib/site_perl .) at external/webkit/Source/WebCore/make-hash-tools.pl line 23.  
BEGIN failed--compilation aborted at external/webkit/Source/WebCore/make-hash-tools.pl line 23.  
make: *** [out/target/product/mx3/obj/STATIC_LIBRARIES/libwebcore_intermediates/Source/WebCore/html/DocTypeStrings.cpp] Error 2  
make: *** Waiting for unfinished jobs....  
make: *** [out/target/product/mx3/obj/STATIC_LIBRARIES/libwebcore_intermediates/Source/WebCore/platform/ColorData.cpp] Error 2  
target Generated: libwebcore <= external/webkit/Source/WebCore/html/parser/HTMLEntityNames.in  

解决方法是安装perl的switch库：
sudo apt-get install libswitch-perl

3.3、将shell从DASH切换到BASH：
http://blog.csdn.net/smilettxp/article/details/19118057?reload
ubuntu 12.04编译MTK6582——FAQ

现象：
加载MT6582_Android_scatter.txt文件后，Flash_tool无法显示下载内容时，查看XXXX_preloader.log中有如下提示：

/bin/sh: 1: [: -a: unexpected operator

awk: line 4: function strtonum never defined
awk: line 4: function strtonum never defined

解决办法：/bin/sh: 1: [: -a: unexpected operator 分析原因为/bin/sh的链接到/bin/dash，而不是/bin/bash（可以用命令ls /bin/sh -lh查看链接的时bash还是dash）
修改sh默认指向到/bin/bash，如下：
sudo dpkg-reconfigure dash 选择no，即可。

awk:line的解决办法是安装gnu awk，如下：
sudo apt-get install gawk

将shell从DASH切换到BASH：
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ sudo dpkg-reconfigure dash
（按TAB按键选择：No）
Removing 'diversion of /bin/sh to /bin/sh.distrib by dash'
Adding 'diversion of /bin/sh to /bin/sh.distrib by bash'
Removing 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash'
Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by bash'
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ ls /bin/sh -lh
lrwxrwxrwx 1 root root 4 6月  14 08:43 /bin/sh -> bash
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 

┌───────────────────────────────────────────────────┤ Configuring dash ├───────────────────────────────────────────────────┐      
      │                                                                                                                          │      
      │ The system shell is the default command interpreter for shell scripts.                                                   │      
      │                                                                                                                          │      
      │ Using dash as the system shell will improve the system's overall performance. It does not alter the shell presented to   │      
      │ interactive users.                                                                                                       │      
      │                                                                                                                          │      
      │ Use dash as the default system shell (/bin/sh)?                                                                          │      
      │                                                                                                                          │      
      │                                                                                                                │      
      │                                                                                                 

 

4、安装JDK1.6：jdk-6u45-linux-x64.bin
（1）
安装JDK1.6，使用如下命令：
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ cd wyb/
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb$ ll
total 8
drwxrwxr-x  2 rootroot rootroot 4096 6月  14 08:50 ./
drwxr-xr-x 17 rootroot rootroot 4096 6月  14 08:50 ../
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb$ ll
total 70408
drwxrwxr-x  2 rootroot rootroot     4096 6月  14 08:50 ./
drwxr-xr-x 17 rootroot rootroot     4096 6月  14 08:50 ../
-rwx------  1 rootroot rootroot 72087592 6月   9 21:39 jdk-6u45-linux-x64.bin*
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb$ sudo cp jdk-6u45-linux-x64.bin /opt
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb$ cd /opt
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/opt$ ll
total 70408
drwxr-xr-x  2 root root     4096 6月  14 08:51 ./
drwxr-xr-x 20 root root     4096 6月  13 11:55 ../
-rwx------  1 root root 72087592 6月  14 08:51 jdk-6u45-linux-x64.bin*
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/opt$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/opt$ sudo chmod 777 jdk-6u45-linux-x64.bin 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/opt$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/opt$ ll
total 70408
drwxr-xr-x  2 root root     4096 6月  14 08:51 ./
drwxr-xr-x 20 root root     4096 6月  13 11:55 ../
-rwxrwxrwx  1 root root 72087592 6月  14 08:51 jdk-6u45-linux-x64.bin*
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/opt$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/opt$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/opt$ sudo ./jdk-6u45-linux-x64.bin 

（2）
设置JDK环境变量,在HOME根目录下按键盘Crtr+H显示HOME目录下所有文件，打开.bashrc，在最后加入以下代码：
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/opt$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/opt$ cd ~
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ ll
total 4679564
drwxr-xr-x 17 rootroot rootroot       4096 6月  14 08:50 ./
drwxr-xr-x  4 root     root           4096 6月  13 11:56 ../
-rw-------  1 rootroot rootroot        289 6月  13 12:46 .bash_history
-rw-r--r--  1 rootroot rootroot        220 6月  13 11:56 .bash_logout
-rw-r--r--  1 rootroot rootroot       3771 6月  13 11:56 .bashrc
drwx------ 14 rootroot rootroot       4096 6月  14 08:01 .cache/
drwxr-xr-x 13 rootroot rootroot       4096 6月  13 12:46 .config/
drwxr-xr-x  2 rootroot rootroot       4096 6月  13 12:05 Desktop/
drwxr-xr-x  2 rootroot rootroot       4096 6月  13 12:05 Documents/
drwxr-xr-x  2 rootroot rootroot       4096 6月  13 12:05 Downloads/
drwx------  3 rootroot rootroot       4096 6月  13 12:16 .gnupg/
drwxr-xr-x  3 rootroot rootroot       4096 6月  13 12:05 .local/
drwx------  5 rootroot rootroot       4096 6月  14 07:45 .mozilla/
drwxr-xr-x  2 rootroot rootroot       4096 6月  13 12:05 Music/
-rw-rw-r--  1 rootroot rootroot    8977887 6月  13 12:27 my_video-1.mkv
-rw-rw-r--  1 rootroot rootroot   35531753 6月  13 12:28 my_video-2.mkv
-rw-rw-r--  1 rootroot rootroot   45847173 6月  13 12:35 my_video-3.mkv
-rw-rw-r--  1 rootroot rootroot    5055327 6月  13 12:35 my_video-4.mkv
-rw-rw-r--  1 rootroot rootroot  809570438 6月  13 12:46 my_video-5.mkv
-rw-rw-r--  1 rootroot rootroot 3886767817 6月  14 08:53 my_video-6.mkv
drwxr-xr-x  2 rootroot rootroot       4096 6月  14 07:45 Pictures/
-rw-r--r--  1 rootroot rootroot        807 6月  13 11:56 .profile
drwxr-xr-x  2 rootroot rootroot       4096 6月  13 12:05 Public/
-rwxrwxrwx  1 rootroot rootroot       9148 6月  14 08:13 smb.conf*
drwx------  2 rootroot rootroot       4096 6月  13 12:16 .ssh/
-rw-r--r--  1 rootroot rootroot          0 6月  13 12:17 .sudo_as_admin_successful
drwxr-xr-x  2 rootroot rootroot       4096 6月  13 12:05 Templates/
drwxr-xr-x  2 rootroot rootroot       4096 6月  13 12:05 Videos/
drwxrwxr-x  2 rootroot rootroot       4096 6月  14 08:50 wyb/
-rw-------  1 rootroot rootroot        154 6月  14 08:13 .Xauthority
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ cp .bashr bak1.bashrc
cp: cannot stat '.bashr': No such file or directory
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ cp .bashrc bak1.bashrc
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 

在.bashrc的最后面加入：
#set java environment
export JAVA_HOME=/opt/jdk1.6.0_45
export JRE_HOME=$JAVA_HOME/jre
export CLASSPATH=$CLASSPATH:$JAVA_HOME/lib:$JRE_HOME/lib
export PATH=$PATH:$JAVA_HOME/bin:$JRE_HOME/bin

（3）
测试JDK是否安装成功,使用命令java -version 如果显示（需要注销，或者重启ubuntu系统）
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ java -version
java version "1.6.0_45"
Java(TM) SE Runtime Environment (build 1.6.0_45-b06)
Java HotSpot(TM) 64-Bit Server VM (build 20.45-b01, mixed mode)
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 

则JDK安装成功。

5、可以不装的软件：
sudo apt-get install nautilus-open-terminal
sudo apt-get install mingw32
sudo apt-get install ia32-libs
sudo apt-get install lib32readline-gplv2-dev
sudo apt-get install u-boot-tools uboot-mkimage
sudo apt-get install gcc-4.4
sudo apt-get install g++-4.4
sudo apt-get install g++-4.4-multilib
sudo apt-get install gcc-4.4-multilib

rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ sudo apt-get install nautilus-open-terminal
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package nautilus-open-terminal
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ sudo apt-get install mingw32
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package mingw32
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ sudo apt-get install ia32-libs
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package ia32-libs is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
  lib32z1

E: Package 'ia32-libs' has no installation candidate
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ sudo apt-get install lib32readline-gplv2-dev
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package lib32readline-gplv2-dev is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'lib32readline-gplv2-dev' has no installation candidate
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ sudo apt-get install u-boot-tools uboot-mkimage
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package uboot-mkimage is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
  u-boot-tools

E: Package 'uboot-mkimage' has no installation candidate
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ sudo apt-get install gcc-4.4
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package gcc-4.4 is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'gcc-4.4' has no installation candidate
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ sudo apt-get install g++-4.4
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package g++-4.4
E: Couldn't find any package by glob 'g++-4.4'
E: Couldn't find any package by regex 'g++-4.4'
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ sudo apt-get install g++-4.4-multilib
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package g++-4.4-multilib
E: Couldn't find any package by glob 'g++-4.4-multilib'
E: Couldn't find any package by regex 'g++-4.4-multilib'
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ sudo apt-get install gcc-4.4-multilib
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package gcc-4.4-multilib
E: Couldn't find any package by glob 'gcc-4.4-multilib'
E: Couldn't find any package by regex 'gcc-4.4-multilib'
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 

可选安装：
系统管理工具：
sudo apt-get install gnome-system-tools  

图形界面下配置防火墙：
sudo apt-get install gufw  

图形界面下配置启动服务： 
sudo apt-get install bum  

图形界面下配置Samba ： 
sudo apt-get install system-config-samba  

性能监控软件: 
sudo apt-get install nmon

sudo apt-get install wine（根据自己的需要可选安装）

http://www.linuxidc.com/Linux/2012-08/67433.htm
Ubuntu 12.04下安装天气指示器My Weather Indicator
安装比较慢

http://www.linuxidc.com/Linux/2012-05/60281.htm
Ubuntu下安装中国天气预报工具cnWeather
ubuntu麒麟版本自带

https://linux.cn/article-4850-1.html
在Ubuntu 14.10中如何安装和配置‘天气信息指示器’
       
代码生成文档工具  
sudo apt-get install docbook-utils xmlto  
（需要1GB+的空间，不知道有啥用？）

其他工具  
sudo apt-get install exuberant-ctags  

不要安装的：
sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so

（以下4个不要安装）
sudo apt-get install gcc-4.5-arm-linux-gnueabihf
sudo apt-get install gcc-arm-linux-gnueabihf
sudo apt-get install g++-arm-linux-gnueabihf
sudo apt-get install c++-arm-linux-gnueabihf  

6、编译安装Python2
https://www.jianshu.com/p/c75b370fdff0
Ubuntu编译安装Python2.7.13

必须安装：
sudo apt-get install build-essential checkinstall
sudo apt-get install libreadline-gplv2-dev libncursesw5-dev libssl-dev libsqlite3-dev tk-dev libgdbm-dev libc6-dev libbz2-dev

rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb$ ll
total 87536
drwxrwxr-x  2 rootroot rootroot     4096 6月  14 09:05 ./
drwxr-xr-x 17 rootroot rootroot     4096 6月  14 09:57 ../
-rwx------  1 rootroot rootroot 72087592 6月   9 21:39 jdk-6u45-linux-x64.bin*
-rwx------  1 rootroot rootroot 17535962 6月   9 21:40 Python-2.7.17.tgz*
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb$ tar zxvf Python-2.7.17.tgz 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb$ cd Python-2.7.17/
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb/Python-2.7.17$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb/Python-2.7.17$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb/Python-2.7.17$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb/Python-2.7.17$ ./configure 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb/Python-2.7.17$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb/Python-2.7.17$ make -j6
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb/Python-2.7.17$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb/Python-2.7.17$ sudo make install
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb/Python-2.7.17$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/wyb/Python-2.7.17$ cd /usr/bin/
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/usr/bin$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/usr/bin$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/usr/bin$ ll pyth*
lrwxrwxrwx 1 root root       9 3月  13 20:31 python2 -> python2.7*
-rwxr-xr-x 1 root root 3694632 4月   7 20:05 python2.7*
lrwxrwxrwx 1 root root       9 6月  13 11:54 python3 -> python3.8*
-rwxr-xr-x 1 root root 5457536 4月  27 23:53 python3.8*
-rwxr-xr-x 1 root root     384 3月  28 10:39 python3-futurize*
-rwxr-xr-x 1 root root     388 3月  28 10:39 python3-pasteurize*
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/usr/bin$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/usr/bin$ sudo cp python2.7 python
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/usr/bin$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/usr/bin$ 
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:/usr/bin$ cd ~
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~$ 

7、编译及其步骤（请参考R系列具体的编译手册）：
          

参考资料：
http://www.linuxidc.com/Linux/2014-04/100645.htm
Ubuntu 14.04 LTS下安装Google Chrome浏览器

http://blog.csdn.net/man_embedded/article/details/40111023
linux下编译MTK android的环境搭建

http://jingyan.baidu.com/article/624e7459abb8eb34e8ba5aa2.html
Ubuntu10.04搭建MTK android编译环境

http://blog.csdn.net/doon/article/details/8053174
ubuntu 12.04 64位设置兼容32位的实现

http://blog.csdn.net/yimiyangguang1314/article/details/39996851
Ubuntu 12.04 64bit 无法识别交叉编译器解决办法

http://pkgs.org/download/ia32-libs
ia32-libs Download (DEB)

http://source.android.com/source/initializing.html
Initializing a Build Environment

http://processors.wiki.ti.com/index.php/TI-Android-JB-4.2.2-DevKit-4.1.1_DeveloperGuide
TI-Android-JB-4.2.2-DevKit-4.1.1 DeveloperGuide

https://www.virtualbox.org/
virtualbox