2019独角兽企业重金招聘Python工程师标准>>> 
本文索引：
- MariaDB安装
- 安装apache
- 文件目录说明
- 启动/关闭apache
- 可能遇到的问题
- 错误信息
- 可能缺少的软件包
MariaDB安装(类似于mysql安装)
https://downloads.mariadb.com/MariaDB/mariadb-10.2.6/bintar-linux-glibc_214-x86_64/mariadb-10.2.6-linux-glibc_214-x86_64.tar.gz
- 解压二进制已编译包
[root@localhost src]# tar zxf mariadb-10.2.6-linux-glibc_214-x86_64.tar.gz
- 移动至/usr/local/下
[root@localhost src]# mv mariadb-10.2.6-linux-glibc_214-x86_64 /usr/local/mariadb
[root@localhost local]# cd mariadb/
- 初始化脚本，指定basedir和datadir
# 这里跟mysql安装不同的地方是需要额外指定basedir
[root@localhost mariadb]# ./scripts/mysql_install_db --user=mysql --basedir=/usr/local/mariadb/ --datadir=/data/mariadb
Installing MariaDB/MySQL system tables in '/data/mariadb' ...
OK
To start mysqld at boot time you have to copy
support-files/mysql.server to the right place for your system
PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER !
To do so, start the server, then issue the following commands:
'/usr/local/mariadb//bin/mysqladmin' -u root password 'new-password'
'/usr/local/mariadb//bin/mysqladmin' -u root -h localhost.localdomain password 'new-password'
Alternatively you can run:
'/usr/local/mariadb//bin/mysql_secure_installation'
which will also give you the option of removing the test
databases and anonymous user created by default. This is
strongly recommended for production servers.
See the MariaDB Knowledgebase at http://mariadb.com/kb or the
MySQL manual for more instructions.
You can start the MariaDB daemon with:
cd '/usr/local/mariadb/' ; /usr/local/mariadb//bin/mysqld_safe --datadir='/data/mariadb'
You can test the MariaDB daemon with mysql-test-run.pl
cd '/usr/local/mariadb//mysql-test' ; perl mysql-test-run.pl
Please report any problems at http://mariadb.org/jira
The latest information about MariaDB is available at http://mariadb.org/.
You can find additional information about the MySQL part at:
http://dev.mysql.com
Consider joining MariaDB's strong and vibrant community:
https://mariadb.org/get-involved/
- 拷贝配置文件（按服务器内存选择，这里测试选择my-small.cnf
# 这里是实现mysql和mariadb同存于一个机器中的做法
# 如果你的主机内只有mariadb，那么直接复制到/etc命令下，命名为my.cnf也行；对于的basedir也同样修改即可
[root@localhost mariadb]# cp support-files/my-small.cnf /usr/local/mariadb/my.cnf
[root@localhost mariadb]# vi /usr/local/mariadb/my.cnf
在[mysqld]下插入下面的内容
basedir=/usr/local/mariadb
datadir=/data/mariadb
- 拷贝启动脚本至/etc/init.d/目录下，并修改内容
[root@localhost mariadb]# cp support-files/mysql.server /etc/init.d/mariadb
[root@localhost mariadb]# vi /etc/init.d/mariadb
修改内容
basedir=/usr/local/mariadb
datadir=/data/mariadb
confdir=$basedir/my.cnf #新增
并在下面启动项内添加--defaults-file选项加载指定的配置文件
$bindir/mysqld_safe --defaults-file="$confdir" --datadir="$datadir" --pid-file="$mysqld_pid_file_path" "$@" &
- 启动脚本并验证是否成功
[root@localhost mariadb]# /etc/init.d/mariadb start
Reloading systemd: [ 确定 ]
Starting mariadb (via systemctl): [ 确定 ]
[root@localhost mariadb]# ps aux | grep mysql
root 3466 0.5 0.1 115392 1736 ? S 13:04 0:00 /bin/sh /usr/local/mariadb//bin/mysqld_safe --defaults-file=/usr/local/mariadb/my.cnf --datadir=/data/mariadb --pid-file=/data/mariadb/localhost.localdomain.pid
mysql 3588 12.7 5.7 1125028 57864 ? Sl 13:04 0:00 /usr/local/mariadb/bin/mysqld --defaults-file=/usr/local/mariadb/my.cnf --basedir=/usr/local/mariadb/ --datadir=/data/mariadb/ --plugin-dir=/usr/local/mariadb/lib/plugin --user=mysql --log-error=/data/mariadb/localhost.localdomain.err --pid-file=/data/mariadb//localhost.localdomain.pid --socket=/tmp/mysql.sock --port=3306
root 3624 0.0 0.0 112676 972 pts/0 S+ 13:04 0:00 grep --color=auto mysql
注意第4步中拷贝、重命名配置文件的过程你可以任意存储，只要在启动脚本内指定好配置文件的路径，就可以安装启动成功。
安装apache
apache是一个基金会的名字，httpd才是要安装的软件包，其早期名字为apache。
Apache官网 www.apache.org
软件包下载地址
由于软件更新，下面的地址链接截止为17-11-12
到http://mirrors.cnnic.cn/apache/查看当前版本号
httpd: http://mirrors.cnnic.cn/apache/httpd/httpd-2.4.28.tar.gz
apr： http://mirrors.cnnic.cn/apache/apr/apr-1.6.3.tar.gz
apr-util: http://mirrors.cnnic.cn/apache/apr/apr-util-1.6.1.tar.gz
软件安装
apr和apr-util
- 先安装apr
[root@localhost src]# tar -zxvf apr-1.6.3.tar.gz
[root@localhost src]# cd apr-1.6.3/
[root@localhost apr-1.6.3]# ./configure --prefix=/usr/local/apr
# 判断是否编译成功
[root@localhost src]# echo $?
0
[root@localhost src]# make && make install
- 安装apr-util
[root@localhost src]# tar -zxvf apr-util-1.6.1.tar.gz
[root@localhost src]# cd apr-util-1.6.1
[root@localhost apr-util-1.6.1]# ./configure --prefix=/usr/loca/apr-util --with-apr=/usr/local/apr
[root@localhost apr-util-1.6.1]# echo $?
0
[root@localhost src]# make && make install
- 安装apache2.4
[root@localhost src]# tar -zxvf httpd-2.4.28.tar.gz
[root@localhost src]# cd httpd-2.4.28
[root@localhost httpd-2.4.28]# ./configure --prefix=/usr/local/apache2.4 --with-apr=/usr/local/apr --with-apr-util=/usr/local/apr-util --enable-so --enable-mods-shared=most
[root@localhost httpd-2.4.28]# echo $?
0
[root@localhost httpd-2.4.28]# make && make install
编译参数说明：
--enable-so 支持动态扩展模块
如php模块，其实质为一个.so文件，通过apache的配置文件制定php模块位置，来加载php，在apache需要php解析时才调用。
--enable-mods-shared=most 允许大多数的模块扩展到apache主进程
查看编译时的参数
[root@localhost ~]# cat /usr/local/apache/build/config.nice
#! /bin/sh
#
# Created by configure
"./configure" \
"--prefix=/usr/local/apache" \
"--with-apr=/usr/local/apr" \
"--with-apr-util=/usr/local/apr-util/" \
"--enable-so" \
"--enable-mods-shared=most" \
"$@"
apache文件目录说明
- bin目录
# apache二进制文件存放目录
[root@localhost apache2.4]# ls bin/
ab checkgid envvars-std htdbm httpd rotatelogs
apachectl dbmmanage fcgistarter htdigest httxt2dbm
apxs envvars htcacheclean htpasswd logresolve
- conf目录
# apache配置文件存放目录
[root@localhost apache2.4]# ls conf/
extra httpd.conf magic mime.types original
- htdocs目录
# 访问apache网络服务时的默认网页存放目录
[root@localhost apache2.4]# ls htdocs/
index.html
- modules目录
# apache可加载模块文件存放目录
[root@localhost apache2.4]# ls modules/
httpd.exp mod_lbmethod_heartbeat.so
mod_access_compat.so mod_log_config.so
mod_actions.so mod_log_debug.so
mod_alias.so mod_logio.so
mod_allowmethods.so mod_macro.so
mod_auth_basic.so mod_mime.so
mod_auth_digest.so mod_negotiation.so
mod_auth_form.so mod_proxy_ajp.so
mod_authn_anon.so mod_proxy_balancer.so
mod_authn_core.so mod_proxy_connect.so
...
查看当前已加载模块
# 其中static为已经编译进二进制文件bin/httpd内的模块；
# shared为动态加载模块，需要在编译时添加参数--enable-so
[root@localhost apache2.4]# /usr/local/apache2.4/bin/apachectl -M
Loaded Modules:
core_module (static)
so_module (static)
http_module (static)
mpm_event_module (static)
authn_file_module (shared)
authn_core_module (shared)
authz_host_module (shared)
authz_groupfile_module (shared)
authz_user_module (shared)
authz_core_module (shared)
access_compat_module (shared)
auth_basic_module (shared)
reqtimeout_module (shared)
filter_module (shared)
mime_module (shared)
log_config_module (shared)
env_module (shared)
headers_module (shared)
setenvif_module (shared)
version_module (shared)
unixd_module (shared)
status_module (shared)
autoindex_module (shared)
dir_module (shared)
alias_module (shared)
启动/关闭apache
# 启动
[root@localhost apache2.4]# /usr/local/apache2.4/bin/apachectl start
[root@localhost apache2.4]# ps aux | grep httpd
root 40316 0.1 0.2 70908 2204 ? Ss 19:44 0:00 /usr/local/apache2.4/bin/httpd -k start
daemon 40317 0.0 0.4 359872 4256 ? Sl 19:44 0:00 /usr/local/apache2.4/bin/httpd -k start
daemon 40318 0.0 0.4 359872 4256 ? Sl 19:44 0:00 /usr/local/apache2.4/bin/httpd -k start
daemon 40319 0.0 0.4 359872 4256 ? Sl 19:44 0:00 /usr/local/apache2.4/bin/httpd -k start
root 40402 0.0 0.0 112680 972 pts/0 R+ 19:44 0:00 grep --color=auto httpd
[root@localhost apache2.4]# netstat -lntp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1598/sshd
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 2415/master
tcp6 0 0 :::3306 :::* LISTEN 1968/mysqld
tcp6 0 0 :::80 :::* LISTEN 40316/httpd
tcp6 0 0 :::22 :::* LISTEN 1598/sshd
tcp6 0 0 ::1:25 :::* LISTEN 2415/master
# 关闭
[root@localhost apache2.4]# /usr/local/apache2.4/bin/apachectl stop
软件安装时可能会遇到的问题
- ./configure编译apr时提示（不是错误）：
[root@localhost apr-1.6.3]# ./configure --prefix=/usr/local/apr
rm: cannot remove 'libtoolT': No such file or directory
config.status: executing default commands
[root@localhost apr-1.6.3]# echo $?
0
- make安装apr-util时报错：
xml/apr_xml.c:35:19: 致命错误：expat.h：没有那个文件或目录
#include
^
编译中断。
解决：缺少expat-devel包
yum install -y expat-devel
- ./configure httpd时报错：
configure: error: pcre-config for libpcre not found. PCRE is required and available from http://pcre.org/
解决：缺少prce库（正则相关的库）
yum install -y pcre-devel
- make http时报错：
...
/usr/local/apr-util/lib/libaprutil-1.so: undefined reference to `XML_StopParser'
/usr/local/apr-util/lib/libaprutil-1.so: undefined reference to `XML_Parse'
/usr/local/apr-util/lib/libaprutil-1.so: undefined reference to `XML_ErrorString'
/usr/local/apr-util/lib/libaprutil-1.so: undefined reference to `XML_SetElementHandler'
collect2: error: ld returned 1 exit status
make[2]: *** [htpasswd] 错误 1
make[2]: 离开目录“/usr/local/src/httpd-2.4.28/support”
make[1]: *** [all-recursive] 错误 1
make[1]: 离开目录“/usr/local/src/httpd-2.4.28/support”
make: *** [all-recursive] 错误 1
解决：安装libxml2-devel包
详细步骤参见：https://my.oschina.net/LuCastiel/blog/1590706
可能缺少的软件包
编译安装前提
yum install -y gcc gcc-c++
安装apr/apr-util/httpd
yum install -y expat-devel pcre-devel