spawn-fcgi运行fcgiwrap

1. 下载spawn-fcgi并安装

http://download.lighttpd.net/spawn-fcgi/releases-1.6.x/spawn-fcgi-1.6.3.tar.gz -P /usr/local/src
tar zxvf /usr/local/src/spawn-fcgi-1.6.3.tar.gz -P /usr/local/src
cd /usr/local/src/spawn-fcgi-1.6.3
./configure
make
# 复制spawn-fcgi到/usr/local/bin/
cp spawn-fcgi /usr/local/bin

2. 下载并安装fcgi库

wget http://fastcgi.com/dist/fcgi-2.4.0.tar.gz -P /usr/local/src
tar zxvf /usr/local/src/fcgi-2.4.0.tar.gz -C /usr/ocal/src
cd /usr/local/src/fcgi-2.4.0
./configure
make
make install

编译过程有报错

error: 'EOF' was not declared in this scope

解决办法：在include/fcgio.h文件中加上#include <cstdio>

vi include/fcgio.h
#include <iostream>
# 添加下行
#include <cstdio>

3. 安装fcgiwrap

wget https://download.github.com/gnosek-fcgiwrap-1.0.3-4-g58ec209.tar.gz -P /usr/locl/src
tar zxvf /usr/local/src/gnosek-fcgiwrap-1.0.3-4-g58ec209.tar.gz -P /usr/local/src
cd /usr/local/src/gnosek-fcgiwrap-58ec209
autoreconf -i
./configure
make
# 复制fcgiwrap
cp fcgiwrap /usr/local/bin

中间有报错

undefined reference to rpl_malloc

解决方法：

vi config.h.in
undef malloc
# 这这行注释
/* #undef malloc */

4. 创建启动和管理脚本

vi /etc/rc.d/init.d/cfcgi
#!/bin/bash
# cfcgi – this script starts and stops the fcgiwrap instance
#
# chkconfig: – 96 28
# description: cfcgi
# processname: cfcgi

RETVAL=0

case "$1" in
start)
echo "Starting fastcgi"
/usr/local/bin/spawn-fcgi -f /usr/local/bin/fcgiwrap -a 192.168.1.10 -p 10000 -F 32 -P /tmp/fastcgi-c.pid -u nobody -g nobody
RETVAL=$?
;;
stop)
echo "Stopping fastcgi"
killall -9 fcgiwrap
RETVAL=$?
;;
restart)
echo "Restarting fastcgi"
killall -9 fcgiwrap
/usr/local/bin/spawn-fcgi -f /usr/local/bin/fcgiwrap -a 192.168.1.10 -p 10000 -F 32 -P /tmp/fastcgi-c.pid -u nobody -g nobody
RETVAL=$?
;;
*)
echo "Usage: c-fastcgi {start|stop|restart}"
exit 1
;;
esac
exit $RETVAL

这个脚本是salogs.com中的，直接拿来用了

添加为服务

chmod 0755 /etc/rc.d/init.d/cfcgi
chown root:root /etc/rc.d/init.d/cfcgi
chkconfig –add cfcgi
chkconfig cfcgi on

5. 启动

service cfcgi start

检验下：

netstat -tlnp | grep "fcgiwrap"
tcp 0 0 192.168.1.10:10000 0.0.0.0:* LISTEN 4021/fcgiwrap
ps -ef | grep "fcgi"
nobody 4021 1 0 18:34 ? 00:00:00 /usr/local/bin/fcgiwrap

注意配置文件中是以nobody身份运行的

6. 配置nginx

location ~ .*\.cgi$
{
fastcgi_pass 192.168.1.10:10000;
include fcgi.conf;
}

配置文件fcgi.conf和php公用为：

vi fcgi.conf
fastcgi_param GATEWAY_INTERFACE CGI/1.1;
fastcgi_param SERVER_SOFTWARE nginx;

fastcgi_param QUERY_STRING $query_string;
fastcgi_param REQUEST_METHOD $request_method;
fastcgi_param CONTENT_TYPE $content_type;
fastcgi_param CONTENT_LENGTH $content_length;

fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
fastcgi_param REQUEST_URI $request_uri;
fastcgi_param DOCUMENT_URI $document_uri;
fastcgi_param DOCUMENT_ROOT $document_root;
fastcgi_param SERVER_PROTOCOL $server_protocol;

fastcgi_param REMOTE_ADDR $remote_addr;
fastcgi_param REMOTE_PORT $remote_port;
fastcgi_param SERVER_ADDR $server_addr;
fastcgi_param SERVER_PORT $server_port;
fastcgi_param SERVER_NAME $server_name;

# PHP only, required if PHP was built with –enable-force-cgi-redirect
fastcgi_param REDIRECT_STATUS 200;

OK，配置完成

参考文档：http://nginx.localdomain.pl/wiki/FcgiWrap http://salogs.com/