STM32实例源码剖析（高级定时器1和8配置）

配置注意：

void TIM1_Int_Init(u16 arr,u16 psc)
{
TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
NVIC_InitTypeDef NVIC_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM1, ENABLE); //①时钟 TIM1 使能
//定时器 TIM1 初始化
TIM_TimeBaseStructure.TIM_Period = arr; //设置自动重装载寄存器周期的值
TIM_TimeBaseStructure.TIM_Prescaler =psc; //设置时钟频率除数的预分频值
TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1; //设置时钟分割
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; //TIM 向上计数
TIM_TimeBaseStructure.TIM_RepetitionCounter=0; //高级定时器1是用定时器功能配置这个才可以是正常的计数频率一开始的72mhz 值得注意的地方
TIM_TimeBaseInit(TIM1, &TIM_TimeBaseStructure); //②初始化 TIM1
TIM_ITConfig(TIM1,TIM_IT_Update,ENABLE ); //③允许更新中断
//中断优先级 NVIC 设置
NVIC_InitStructure.NVIC_IRQChannel = TIM1_UP_IRQn; //TIM1 中断
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; //先占优先级 1 级
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3; //从优先级 3 级
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; //IRQ 通道被使能
NVIC_Init(&NVIC_InitStructure); //④初始化 NVIC 寄存器
TIM_Cmd(TIM1, ENABLE); //⑤使能 TIM1
}