预分频之一

若计数器的输入脉冲的频率为f,则输出的Q0、Q1、Q2和Q3端输出脉冲的频率依次为1/2f,1/4f,1/8f/1/16f。

Verilog 代码实现

预分频器代码 prescaler.v

module prescaler(
                 output          scaler16_o,
                 output          scaler8_o,
                 output          scaler4_o,
                 output          scaler2_o,
                 input           clk,
                 input           rstn,
                 input           en_i
                 );

reg       [3:0]  cnt;
reg       [3:0]  cnt_next;


always@(posedge clk, negedge rstn)
begin
    if(!rstn)
        cnt <= 4'b0;
    else
        cnt <= cnt_next;
end


always@(*)
begin
    if(en_i)
        if(cnt == 4'b1111)
            cnt_next = 4'b0;
        else
            cnt_next = cnt + 1'b1;
    else
        cnt_next = cnt;
end


assign scaler16_o = cnt[3];
assign scaler8_o  = cnt[2];
assign scaler4_o  = cnt[1];
assign scaler2_o  = cnt[0];

endmodule

testbench prescaler_tb.v

module prescaler_tb;
reg   clk;
reg   rstn;
reg   en_i;
wire  scaler2_o;
wire  scaler4_o;
wire  scaler8_o;
wire  scaler16_o;

initial
begin
    clk   = 0;

    rstn  = 1;
    #30  rstn = 0;
    #100 rstn = 1;

    en_i = 1;

    repeat(100) @(posedge clk); 

    $finish;

end

always #20 clk = ~clk;

initial begin
  $fsdbDumpfile("test.fsdb");
  $fsdbDumpvars();
end

prescaler  u_prescaler(
                 .scaler16_o(scaler16_o),
                 .scaler8_o(scaler8_o),
                 .scaler4_o(scaler4_o),
                 .scaler2_o(scaler2_o),
                 .clk(clk),
                 .rstn(rstn),
                 .en_i(en_i)
                 );
endmodule

仿真结果

预分频之一_第1张图片

参考资料

[1] 数字电子技术基础(第五版) 阎石主编

转载于:https://www.cnblogs.com/OneFri/p/6014296.html

你可能感兴趣的:(预分频之一)