RX601分析之三

RX601切换频道后,每0.215ms左右读取0x07(RX_IRQ_STATUS_ADR),重复13次.

返回0x3a代表数据包到达,否则切换频道,频道从0x4到0x4F.

WriteRegister(0x00,频道号);
WriteRegister(0x29,0x00);
WriteRegister(0x05,0x87);

当频道扫描一遍后

WriteRegister(0x15, 00); //┳ CRC Seed
WriteRegister(0x16, 00); //┛
WriteRegisterMulti(0x22, 新的sop);
WriteRegister(0x0F, 0x28); //WriteRegister(XACT_CFG_ADR,FRC_END_STATE | END_STATE_TXSYNTH);
WriteRegister(0x00, 0x04); //WriteRegister(CHANNEL_ADR,0x04);
WriteRegister(0x29, 0x00);
WriteRegister(0x05, 0x87); //WriteRegister(RX_CTRL_ADR,RX_CTRL_RST|RX_GO);