sun服务器Solaris9安装
sun服务器Solaris9安装
1、开机上电，等待显示器亮后，按Stop-a键。如果是在终端上安装，按Ctrl-Break键。
这时，服务器进入OK监控状态：
OK
1、开机上电，等待显示器亮后，按Stop-a键。如果是在终端上安装，按Ctrl-Break键。
这时，服务器进入OK监控状态：
OK
2、将Solaris9系统盘Software 1/2插入DVD/CD-ROM，并在OK提示符下输入以下命令：
OK boot cdrom
这时，服务器从光盘上开始引导系统
OK boot cdrom
这时，服务器从光盘上开始引导系统
3、等待一会，，系统出现如下提示：
Select a Language
0. English
1. French
2. German
3. Italian
4. Japanese
5. Korean
6. Simplified Chinese
7. Spanish
8. Swedish
9. Traditional Chinese
Please make a choice (0 - 9), or press h or ? for help:
这是选择语言，请注意，在这里一定要选择 0. English
输入0后按回车键；
4、出现如下提示：
Select a Locale
0. English (C - 7-bit ASCII)
1. Albania (ISO8859-2)
2. Australia (ISO8859-1)
3. Belgium-Flemish (ISO8859-1)
4. Belgium-Flemish (ISO8859-15 - Euro)
5. Bosnia (ISO8859-2)
6. Brazil (ISO8859-1)
7. Brazil (UTF-8)
8. Bulgaria (ISO8859-5)
9. Canada-English (ISO8859-1)
10. Catalan, Spain (ISO8859-1)
11. Catalan, Spain (ISO8859-15 - Euro)
12. Croatia (ISO8859-2)
13. Czech Republic (ISO8859-2)
14. Denmark (ISO8859-1)
15. Denmark (ISO8859-15 - Euro)
16. Egypt (ISO8859-6)
17. Egypt (UTF-8)
18. Estonia (ISO8859-15)
Press Return to show more choices.
Please make a choice (0 - 59), or press h or ? for help:
这是选择本地语言，请注意，在这里一定要选择0. English (C - 7-bit ASCII)
输入0后按回车键；
5、如果服务器接了键盘和显示器，跳过这一步；如果是在终端上安装Solaris9，这时会出现如下提示：
What type of terminal are you using?
1) ANSI Standard CRT
2) DEC VT52
3) DEC VT100
4) Heathkit 19
5) Lear Siegler ADM31
6) PC Console
7) Sun Command Tool
8) Sun Workstation
9) Televideo 910
10) Televideo 925
11) Wyse Model 50
12) X Terminal Emulator (xterms)
13) CDE Terminal Emulator (dtterm)
14) Other
Type the number of your choice and press Return:
这是选择终端类型，选择 3) DEC VT100
输入3后按回车键；
6、出现如下提示：
The Solaris Installation Program
The Solaris installation program is divided into a series of short sections
where you'll be prompted to provide information for the installation. At
the end of each section, you'll be able to change the selections you've
made before continuing.
About navigation...
- The mouse cannot be used
- If your keyboard does not have function keys, or they do not
respond, press ESC; the legend at the bottom of the screen
will change to show the ESC keys to use for navigation.
F2_Continue F6_Help
该提示告诉安装人员，Solaris的安装分为好几部分，每一部分后面都需要你进行确认，如果发现
有错，可以更改你先前输入的信息
按F2键继续安装；
7、出现如下提示：
Identify This System
On the next screens, you must identify this system as networked or
non-networked, and set the default time zone and date/time.
If this system is networked, the software will try to find the information
it needs to identify your system; you will be prompted to supply any
information it cannot find.
> To begin identifying this system, press F2.
F2_Continue F6_Help
该提示告诉安装人员，要开始定义系统的名字，网络及掩码，时区及时间
按F2键继续安装；
8、出现如下提示：
Network Connectivity
Specify Yes if the system is connected to the network by one of the Solaris
or vendor network/communication Ethernet cards that are supported on the
Solaris CD. See your hardware documentation for the current list of
supported cards.
Specify No if the system is connected to a network/communication card that
is not supported on the Solaris CD, and follow the instructions listed under
Help.
Networked
[X] Yes
[ ] No
F2_Continue F6_Help
安装程序提示系统是否连接了网络？使用上下箭头键移动，在合适的位置停止后，按空格键，
选中该选项；
在这次的安装中，需要网络功能，因此按F2键继续安装；
9、出现如下提示：
DHCP
On this screen you must specify whether or not this system should use DHCP
for network interface configuration. Choose Yes if DHCP is to be used, or
No if the interfaces are to be configured manually.
NOTE: DHCP support will not be enabled, if selected, until after the system
reboots.
Use DHCP
[ ] Yes
[X] No
F2_Continue F6_Help
提示是否需要使用DHCP来配置主机的IP地址；
在这次安装中，不使用DHCP功能，因此按F2键继续安装；
10、出现提示：
Primary Network Interface
On this screen you must specify which of the following network adapters is
the system's primary network interface. Usually the correct choice is the
lowest number. However, do not guess; ask your system administrator if
you're not sure.
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
Primary network interface
[X] ce0
[ ] ge0
[ ] eri0
[ ] fcip0
F2_Continue F6_Help
选择主网卡（Primary Network Interface）
在这次安装例子中，使用上下箭头键移动光标，移动到eri0处，按空格键选中该网卡，
按F2键继续安装；
11、出现提示：
Host Name
On this screen you must enter your host name, which identifies this system
on the network. The name must be unique within your domain; creating a
duplicate host name will cause problems on the network after you install
Solaris.
A host name must be at least two characters; it can contain letters, digits,
and minus signs (-).
Host name:rac1
Select a Language
0. English
1. French
2. German
3. Italian
4. Japanese
5. Korean
6. Simplified Chinese
7. Spanish
8. Swedish
9. Traditional Chinese
Please make a choice (0 - 9), or press h or ? for help:
这是选择语言，请注意，在这里一定要选择 0. English
输入0后按回车键；
4、出现如下提示：
Select a Locale
0. English (C - 7-bit ASCII)
1. Albania (ISO8859-2)
2. Australia (ISO8859-1)
3. Belgium-Flemish (ISO8859-1)
4. Belgium-Flemish (ISO8859-15 - Euro)
5. Bosnia (ISO8859-2)
6. Brazil (ISO8859-1)
7. Brazil (UTF-8)
8. Bulgaria (ISO8859-5)
9. Canada-English (ISO8859-1)
10. Catalan, Spain (ISO8859-1)
11. Catalan, Spain (ISO8859-15 - Euro)
12. Croatia (ISO8859-2)
13. Czech Republic (ISO8859-2)
14. Denmark (ISO8859-1)
15. Denmark (ISO8859-15 - Euro)
16. Egypt (ISO8859-6)
17. Egypt (UTF-8)
18. Estonia (ISO8859-15)
Press Return to show more choices.
Please make a choice (0 - 59), or press h or ? for help:
这是选择本地语言，请注意，在这里一定要选择0. English (C - 7-bit ASCII)
输入0后按回车键；
5、如果服务器接了键盘和显示器，跳过这一步；如果是在终端上安装Solaris9，这时会出现如下提示：
What type of terminal are you using?
1) ANSI Standard CRT
2) DEC VT52
3) DEC VT100
4) Heathkit 19
5) Lear Siegler ADM31
6) PC Console
7) Sun Command Tool
8) Sun Workstation
9) Televideo 910
10) Televideo 925
11) Wyse Model 50
12) X Terminal Emulator (xterms)
13) CDE Terminal Emulator (dtterm)
14) Other
Type the number of your choice and press Return:
这是选择终端类型，选择 3) DEC VT100
输入3后按回车键；
6、出现如下提示：
The Solaris Installation Program
The Solaris installation program is divided into a series of short sections
where you'll be prompted to provide information for the installation. At
the end of each section, you'll be able to change the selections you've
made before continuing.
About navigation...
- The mouse cannot be used
- If your keyboard does not have function keys, or they do not
respond, press ESC; the legend at the bottom of the screen
will change to show the ESC keys to use for navigation.
F2_Continue F6_Help
该提示告诉安装人员，Solaris的安装分为好几部分，每一部分后面都需要你进行确认，如果发现
有错，可以更改你先前输入的信息
按F2键继续安装；
7、出现如下提示：
Identify This System
On the next screens, you must identify this system as networked or
non-networked, and set the default time zone and date/time.
If this system is networked, the software will try to find the information
it needs to identify your system; you will be prompted to supply any
information it cannot find.
> To begin identifying this system, press F2.
F2_Continue F6_Help
该提示告诉安装人员，要开始定义系统的名字，网络及掩码，时区及时间
按F2键继续安装；
8、出现如下提示：
Network Connectivity
Specify Yes if the system is connected to the network by one of the Solaris
or vendor network/communication Ethernet cards that are supported on the
Solaris CD. See your hardware documentation for the current list of
supported cards.
Specify No if the system is connected to a network/communication card that
is not supported on the Solaris CD, and follow the instructions listed under
Help.
Networked
[X] Yes
[ ] No
F2_Continue F6_Help
安装程序提示系统是否连接了网络？使用上下箭头键移动，在合适的位置停止后，按空格键，
选中该选项；
在这次的安装中，需要网络功能，因此按F2键继续安装；
9、出现如下提示：
DHCP
On this screen you must specify whether or not this system should use DHCP
for network interface configuration. Choose Yes if DHCP is to be used, or
No if the interfaces are to be configured manually.
NOTE: DHCP support will not be enabled, if selected, until after the system
reboots.
Use DHCP
[ ] Yes
[X] No
F2_Continue F6_Help
提示是否需要使用DHCP来配置主机的IP地址；
在这次安装中，不使用DHCP功能，因此按F2键继续安装；
10、出现提示：
Primary Network Interface
On this screen you must specify which of the following network adapters is
the system's primary network interface. Usually the correct choice is the
lowest number. However, do not guess; ask your system administrator if
you're not sure.
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
Primary network interface
[X] ce0
[ ] ge0
[ ] eri0
[ ] fcip0
F2_Continue F6_Help
选择主网卡（Primary Network Interface）
在这次安装例子中，使用上下箭头键移动光标，移动到eri0处，按空格键选中该网卡，
按F2键继续安装；
11、出现提示：
Host Name
On this screen you must enter your host name, which identifies this system
on the network. The name must be unique within your domain; creating a
duplicate host name will cause problems on the network after you install
Solaris.
A host name must be at least two characters; it can contain letters, digits,
and minus signs (-).
Host name:rac1
F2_Continue F6_Help
输入主机名，本例中，输入主机名rac1后按F2键继续安装；
12、出现提示：
IP Address
On this screen you must enter the Internet Protocol (IP) address for this
system. It must be unique and follow your site's address conventions, or a
system/network failure could result.
IP addresses contain four sets of numbers separated by periods (for example
129.200.9.1).
IP address:192.168.0.1
F2_Continue F6_Help
提示输入主机的IP地址，本例中，输入192.168.0.1后按F2键继续安装；
13、出现提示：
Subnets
On this screen you must specify whether this system is part of a subnet. If
you specify incorrectly, the system will have problems communicating on the
network after you reboot.
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
System part of a subnet
[X] Yes
[ ] No
F2_Continue F6_Help
提示主机的网络是否采用子网掩码的方法，本例中，要采用子网掩码的方法，因此按F2键继续安装；
14、出现提示：
Netmask
输入主机名，本例中，输入主机名rac1后按F2键继续安装；
12、出现提示：
IP Address
On this screen you must enter the Internet Protocol (IP) address for this
system. It must be unique and follow your site's address conventions, or a
system/network failure could result.
IP addresses contain four sets of numbers separated by periods (for example
129.200.9.1).
IP address:192.168.0.1
F2_Continue F6_Help
提示输入主机的IP地址，本例中，输入192.168.0.1后按F2键继续安装；
13、出现提示：
Subnets
On this screen you must specify whether this system is part of a subnet. If
you specify incorrectly, the system will have problems communicating on the
network after you reboot.
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
System part of a subnet
[X] Yes
[ ] No
F2_Continue F6_Help
提示主机的网络是否采用子网掩码的方法，本例中，要采用子网掩码的方法，因此按F2键继续安装；
14、出现提示：
Netmask
On this screen you must specify the netmask of your subnet. A default
netmask is shown; do not accept the default unless you are sure it is
correct for your subnet. A netmask must contain four sets of numbers
separated by periods (for example 255.255.255.0).
Netmask: 255.255.255.0
F2_Continue F6_Help
提示你输入主机的子网掩码，本例中，输入255.255.255.0后，按F2键继续安装；
15、出现提示：
IPv6
netmask is shown; do not accept the default unless you are sure it is
correct for your subnet. A netmask must contain four sets of numbers
separated by periods (for example 255.255.255.0).
Netmask: 255.255.255.0
F2_Continue F6_Help
提示你输入主机的子网掩码，本例中，输入255.255.255.0后，按F2键继续安装；
15、出现提示：
IPv6
On this screen you should specify whether or not IPv6, the next generation
Internet Protocol, will be enabled on this machine. Enabling IPv6 will have
no effect if this machine is not on a network that provides IPv6 service.
IPv4 service will not be affected if IPv6 is enabled.
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
Enable IPv6
[ ] Yes
[X] No
F2_Continue F6_Help
提示你是否采用IPv6技术？本例中，不采用IPv6技术，按F2键继续安装；
16、等待一会，出现提示：
Set the Default Route
To specify the default route, you can let the software try to detect one
upon reboot, you can specify the IP address of the router, or you can choose
None. Choose None if you do not have a router on your subnet.
> To make a selection, use the arrow keys to select your choice and press
Return to mark it [X].
Default Route
[X] Detect one upon reboot
[ ] Specify one
[ ] None
F2_Continue F6_Help
提示你设置缺省网关，本例中，选择None，现在不设置缺省网关，以后在设置，使用上下
箭头，移动光标到[ ] None位置后，按空格键选中，然后按F2键继续安装；
17、出现如下提示：
Confirm Information
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.
Networked: Yes
Use DHCP: No
Primary network interface: ce0
Host name: rac1
IP address: 192.168.0.1
System part of a subnet: Yes
Netmask: 255.255.255.0
Enable IPv6: No
Default Route: None
F2_Continue F4_Change F6_Help
提示你确认上面输入的信息，如果上述的输入信息有错，可以按F4键后重新输入；如果正确，
按F2键后继续安装；
18、出现提示：
Configure Security Policy:
Internet Protocol, will be enabled on this machine. Enabling IPv6 will have
no effect if this machine is not on a network that provides IPv6 service.
IPv4 service will not be affected if IPv6 is enabled.
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
Enable IPv6
[ ] Yes
[X] No
F2_Continue F6_Help
提示你是否采用IPv6技术？本例中，不采用IPv6技术，按F2键继续安装；
16、等待一会，出现提示：
Set the Default Route
To specify the default route, you can let the software try to detect one
upon reboot, you can specify the IP address of the router, or you can choose
None. Choose None if you do not have a router on your subnet.
> To make a selection, use the arrow keys to select your choice and press
Return to mark it [X].
Default Route
[X] Detect one upon reboot
[ ] Specify one
[ ] None
F2_Continue F6_Help
提示你设置缺省网关，本例中，选择None，现在不设置缺省网关，以后在设置，使用上下
箭头，移动光标到[ ] None位置后，按空格键选中，然后按F2键继续安装；
17、出现如下提示：
Confirm Information
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.
Networked: Yes
Use DHCP: No
Primary network interface: ce0
Host name: rac1
IP address: 192.168.0.1
System part of a subnet: Yes
Netmask: 255.255.255.0
Enable IPv6: No
Default Route: None
F2_Continue F4_Change F6_Help
提示你确认上面输入的信息，如果上述的输入信息有错，可以按F4键后重新输入；如果正确，
按F2键后继续安装；
18、出现提示：
Configure Security Policy:
Specify Yes if the system will use the Kerberos security mechanism.
Specify No if this system will use standard UNIX security.
Configure Kerberos Security
Specify No if this system will use standard UNIX security.
Configure Kerberos Security
[ ] Yes
[X] No
F2_Continue F6_Help
配置安全策略，本例中，选择No,因此按F2键继续安装；
19、出现提示：
Confirm Information
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.
Configure Kerberos Security: No
F2_Continue F4_Change F6_Help
确认刚才输入的信息，如果刚才输入的信息有错，按F4键重新输入；如果正确，按F2键继续安装；
20、出现提示：
Name Service
On this screen you must provide name service information. Select the name
service that will be used by this system, or None if your system will either
not use a name service at all, or if it will use a name service not listed
here.
> To make a selection, use the arrow keys to highlight the option
and press Return to mark it [X].
Name service
[X] NIS+
[ ] NIS
[ ] DNS
[ ] LDAP
[ ] None
F2_Continue F6_Help
配置名字服务，本例中，选择None（不采用任何名字服务）。使用上下箭头移动光标到
None后，按空格键，选中该选项，按F2键继续安装；
21、出现提示：
Confirm Information
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.
Name service: None
F2_Continue F4_Change F6_Help
确认刚才输入的信息，如果刚才输入的信息有错，按F4键重新输入；如果正确，按F2键继续安装；
22、出现提示：
Time Zone
On this screen you must specify your default time zone. You can specify a
time zone in three ways: select one of the continents or oceans from the
list, select other - offset from GMT, or other - specify time zone file.
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
Continents and Oceans
- [ ] Africa
x [ ] Americas
x [ ] Antarctica
x [ ] Arctic Ocean
x [ ] Asia
x [ ] Atlantic Ocean
x [ ] Australia
x [ ] Europe
v [ ] Indian Ocean
F2_Continue F6_Help
设置时区，使用上下箭头移动光标到Asia后，按空格键，选中该选项，按F2键继续安装；
23、出现提示：
Country or Region
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
Countries and Regions
- [ ] Afghanistan
x [ ] Armenia
x [ ] Azerbaijan
x [ ] Bahrain
x [ ] Bangladesh
x [ ] Bhutan
x [ ] Brunei
x [ ] Cambodia
x [ ] China
x [ ] Cyprus
x [ ] East Timor
x [ ] Georgia
v [ ] Hong Kong
F2_Continue F6_Help
择国家或地区，使用上下箭头移动光标到China后，按空格键，选中该选项，按F2键继续安装；
24、出现提示：
Confirm Information
Date and Time
> Accept the default date and time or enter
new values.
Date and time: 2003-08-18 10:36
Year (4 digits) : 2003
Month (1-12) : 08
Day (1-31) : 18
Hour (0-23) : 10
Minute (0-59) : 36
F2_Continue F6_Help
设置时间。本例中，不在此设置时间，安装结束后，使用data命令修改时间。按F2键继续安装；
25、出现提示：
Confirm Information
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.
Time zone: PRC
Date and time: 2003-08-18 10:36:00
[X] No
F2_Continue F6_Help
配置安全策略，本例中，选择No,因此按F2键继续安装；
19、出现提示：
Confirm Information
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.
Configure Kerberos Security: No
F2_Continue F4_Change F6_Help
确认刚才输入的信息，如果刚才输入的信息有错，按F4键重新输入；如果正确，按F2键继续安装；
20、出现提示：
Name Service
On this screen you must provide name service information. Select the name
service that will be used by this system, or None if your system will either
not use a name service at all, or if it will use a name service not listed
here.
> To make a selection, use the arrow keys to highlight the option
and press Return to mark it [X].
Name service
[X] NIS+
[ ] NIS
[ ] DNS
[ ] LDAP
[ ] None
F2_Continue F6_Help
配置名字服务，本例中，选择None（不采用任何名字服务）。使用上下箭头移动光标到
None后，按空格键，选中该选项，按F2键继续安装；
21、出现提示：
Confirm Information
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.
Name service: None
F2_Continue F4_Change F6_Help
确认刚才输入的信息，如果刚才输入的信息有错，按F4键重新输入；如果正确，按F2键继续安装；
22、出现提示：
Time Zone
On this screen you must specify your default time zone. You can specify a
time zone in three ways: select one of the continents or oceans from the
list, select other - offset from GMT, or other - specify time zone file.
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
Continents and Oceans
- [ ] Africa
x [ ] Americas
x [ ] Antarctica
x [ ] Arctic Ocean
x [ ] Asia
x [ ] Atlantic Ocean
x [ ] Australia
x [ ] Europe
v [ ] Indian Ocean
F2_Continue F6_Help
设置时区，使用上下箭头移动光标到Asia后，按空格键，选中该选项，按F2键继续安装；
23、出现提示：
Country or Region
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
Countries and Regions
- [ ] Afghanistan
x [ ] Armenia
x [ ] Azerbaijan
x [ ] Bahrain
x [ ] Bangladesh
x [ ] Bhutan
x [ ] Brunei
x [ ] Cambodia
x [ ] China
x [ ] Cyprus
x [ ] East Timor
x [ ] Georgia
v [ ] Hong Kong
F2_Continue F6_Help
择国家或地区，使用上下箭头移动光标到China后，按空格键，选中该选项，按F2键继续安装；
24、出现提示：
Confirm Information
Date and Time
> Accept the default date and time or enter
new values.
Date and time: 2003-08-18 10:36
Year (4 digits) : 2003
Month (1-12) : 08
Day (1-31) : 18
Hour (0-23) : 10
Minute (0-59) : 36
F2_Continue F6_Help
设置时间。本例中，不在此设置时间，安装结束后，使用data命令修改时间。按F2键继续安装；
25、出现提示：
Confirm Information
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.
Time zone: PRC
Date and time: 2003-08-18 10:36:00
F2_Continue F4_Change F6_Help
确认刚才输入的信息，如果刚才输入的信息有错，按F4键重新输入；如果正确，按F2键继续安装；
26、等待一会，出现提示：
Solaris Interactive Installation
You'll be using the initial option for installing Solaris software on the
system. The initial option overwrites the system disks when the new Solaris
software is installed.
On the following screens, you can accept the defaults or you can customize
how Solaris software will be installed by:
- Selecting the type of Solaris software to install
- Selecting disks to hold software you've selected
- Specifying how file systems are laid out on the disks
After completing these tasks, a summary of your selections (called a
profile) will be displayed.
There are two ways to install your Solaris software:
- "Standard" installs your system from a standard Solaris Distribution.
- "Flash" installs your system from one or more Flash Archives.
F2_Standard F4_Flash F5_Exit F6_Help
选择Standard install：按F2键，继续安装；
27、等待一会，出现提示：
Select Geographic Regions
Select the geographic regions for which support should be installed.
> [ ] Australasia
> [ ] Central America
> [ ] South America
> [ ] Northern Africa
> [ ] Middle East
> [ ] Eastern Europe
> [ ] Northern Europe
> [ ] Western Europe
> [ ] Central Europe
> [ ] Southern Europe
> [ ] North America
> [ ] Asia
Move left, right, up, down using the arrow keys
F2_Continue F3_Go Back F5_Exit F6_Help
选择地理区域，本例中，选择Asia：使用上下箭头移动光标到Asia处，按回车键后，出现展
开的提示：
V [ ] Asia
[ ] Hindi UTF-8
[ ] Japanese EUC (ja)
[ ] Japanese PC Kanji (ja_JP.PCK)
[ ] Japanese UTF-8 (ja_JP.UTF-8)
[ ] Korean EUC
[ ] Korean UTF-8
[x] Simplified Chinese EUC
[x] Simplified Chinese GB18030
[x] Simplified Chinese GBK
[x] Simplified Chinese UTF-8
[ ] Thai TIS620
[ ] Thai UTF-8
[x] Traditional Chinese (Hong Kong) BIG5+HKSCS
[x] Traditional Chinese (Hong Kong) UTF-8
[x] Traditional Chinese BIG5
[x] Traditional Chinese EUC
[x] Traditional Chinese UTF-8
使用上下左右箭头移动光标到所有中文Chinese处，按空格键选中语言后，按F2键继续安装；
28、出现提示：
确认刚才输入的信息，如果刚才输入的信息有错，按F4键重新输入；如果正确，按F2键继续安装；
26、等待一会，出现提示：
Solaris Interactive Installation
You'll be using the initial option for installing Solaris software on the
system. The initial option overwrites the system disks when the new Solaris
software is installed.
On the following screens, you can accept the defaults or you can customize
how Solaris software will be installed by:
- Selecting the type of Solaris software to install
- Selecting disks to hold software you've selected
- Specifying how file systems are laid out on the disks
After completing these tasks, a summary of your selections (called a
profile) will be displayed.
There are two ways to install your Solaris software:
- "Standard" installs your system from a standard Solaris Distribution.
- "Flash" installs your system from one or more Flash Archives.
F2_Standard F4_Flash F5_Exit F6_Help
选择Standard install：按F2键，继续安装；
27、等待一会，出现提示：
Select Geographic Regions
Select the geographic regions for which support should be installed.
> [ ] Australasia
> [ ] Central America
> [ ] South America
> [ ] Northern Africa
> [ ] Middle East
> [ ] Eastern Europe
> [ ] Northern Europe
> [ ] Western Europe
> [ ] Central Europe
> [ ] Southern Europe
> [ ] North America
> [ ] Asia
Move left, right, up, down using the arrow keys
F2_Continue F3_Go Back F5_Exit F6_Help
选择地理区域，本例中，选择Asia：使用上下箭头移动光标到Asia处，按回车键后，出现展
开的提示：
V [ ] Asia
[ ] Hindi UTF-8
[ ] Japanese EUC (ja)
[ ] Japanese PC Kanji (ja_JP.PCK)
[ ] Japanese UTF-8 (ja_JP.UTF-8)
[ ] Korean EUC
[ ] Korean UTF-8
[x] Simplified Chinese EUC
[x] Simplified Chinese GB18030
[x] Simplified Chinese GBK
[x] Simplified Chinese UTF-8
[ ] Thai TIS620
[ ] Thai UTF-8
[x] Traditional Chinese (Hong Kong) BIG5+HKSCS
[x] Traditional Chinese (Hong Kong) UTF-8
[x] Traditional Chinese BIG5
[x] Traditional Chinese EUC
[x] Traditional Chinese UTF-8
使用上下左右箭头移动光标到所有中文Chinese处，按空格键选中语言后，按F2键继续安装；
28、出现提示：
Select Software
Select the Solaris software to install on the system.
NOTE: After selecting a software group, you can add or remove software by
customizing it. However, this requires understanding of software
dependencies and how Solaris software is packaged. The software groups
displaying 64-bit contain 64-bit support.
[ ] Entire Distribution plus OEM support 64-bit 2732.00 MB
[X] Entire Distribution 64-bit ................. 2698.00 MB
[ ] Developer System Support 64-bit ............ 2366.00 MB
[ ] End User System Support 64-bit ............. 1864.00 MB
[ ] Core System Support 64-bit ................. 861.00 MB
F2_Continue F3_Go Back F4_Customize F5_Exit F6_Help
选择 [ ] Entire Distribution plus OEM support 64-bit 2732.00 MB：使用上下箭头
将光标移动到 [ ] Entire Distribution plus OEM support 64-bit 2732.00 MB处，按
空格键后，按F2键继续安装；
29、出现提示：
Select Disks
On this screen you must select the disks for installing Solaris software.
Start by looking at the Suggested Minimum field; this value is the
approximate space needed to install the software you've selected. Keep
selecting disks until the Total Selected value exceeds the Suggested Minimum
value.
Disk Device (Size) Available Space
=============================================
[ ] c1t0d0 (69994 MB) 69994 MB
Total Selected: 0 MB
Suggested Minimum: 1919 MB
F2_Continue F3_Go Back F4_Edit F5_Exit F6_Help
选择磁盘：按空格键，选中磁盘后，按F2键继续安装；
30、出现提示：
Preserve Data?
Do you want to preserve existing data? At least one of the disks you've
selected for installing Solaris software has file systems or unnamed slices
that you may want to save.
F2_Continue F3_Go Back F4_Preserve F5_Exit F6_Help
提示是否保存数据，本例中，不保存，按F2继续安装；
Select the Solaris software to install on the system.
NOTE: After selecting a software group, you can add or remove software by
customizing it. However, this requires understanding of software
dependencies and how Solaris software is packaged. The software groups
displaying 64-bit contain 64-bit support.
[ ] Entire Distribution plus OEM support 64-bit 2732.00 MB
[X] Entire Distribution 64-bit ................. 2698.00 MB
[ ] Developer System Support 64-bit ............ 2366.00 MB
[ ] End User System Support 64-bit ............. 1864.00 MB
[ ] Core System Support 64-bit ................. 861.00 MB
F2_Continue F3_Go Back F4_Customize F5_Exit F6_Help
选择 [ ] Entire Distribution plus OEM support 64-bit 2732.00 MB：使用上下箭头
将光标移动到 [ ] Entire Distribution plus OEM support 64-bit 2732.00 MB处，按
空格键后，按F2键继续安装；
29、出现提示：
Select Disks
On this screen you must select the disks for installing Solaris software.
Start by looking at the Suggested Minimum field; this value is the
approximate space needed to install the software you've selected. Keep
selecting disks until the Total Selected value exceeds the Suggested Minimum
value.
Disk Device (Size) Available Space
=============================================
[ ] c1t0d0 (69994 MB) 69994 MB
Total Selected: 0 MB
Suggested Minimum: 1919 MB
F2_Continue F3_Go Back F4_Edit F5_Exit F6_Help
选择磁盘：按空格键，选中磁盘后，按F2键继续安装；
30、出现提示：
Preserve Data?
Do you want to preserve existing data? At least one of the disks you've
selected for installing Solaris software has file systems or unnamed slices
that you may want to save.
F2_Continue F3_Go Back F4_Preserve F5_Exit F6_Help
提示是否保存数据，本例中，不保存，按F2继续安装；
31、出现提示：
Automatically Layout File Systems?
Do you want to use auto-layout to automatically layout file systems?
Manually laying out file systems requires advanced system administration
skills.
F2_Auto Layout F3_Go Back F4_Manual Layout F5_Exit F6_Help
提示是否采用自动布局文件系统：本例中，采用自动布局文件系统，所以按F2键继续安装；
32、出现提示：
Automatically Layout File Systems
On this screen you must select all the file systems you want auto-layout to
create, or accept the default file systems shown.
NOTE: For small disks, it may be necessary for auto-layout to break up some
of the file systems you request into smaller file systems to fit the
available disk space. So, after auto-layout completes, you may find file
systems in the layout that you did not select from the list below.
File Systems for Auto-layout
========================================
[X] /
[ ] /opt
[ ] /usr
[ ] /usr/openwin
[ ] /var
[X] swap
F2_Continue F5_Cancel F6_Help
选中以下几项：
[X] /
[X] /opt
[X] /usr
[ ] /usr/openwin（不选）
[X] /var
[X] swap
然后按F2键继续安装；
33、出现提示：
File System and Disk Layout
The summary below is your current file system and disk layout, based on the
information you've supplied.
NOTE: If you choose to customize, you should understand file systems, their
intended purpose on the disk, and how changing them may affect the operation
of the system.
File system/Mount point Disk/Slice Size
================================================
/ c1t0d0s0 144 MB
/var c1t0d0s1 74 MB
overlap c1t0d0s2 69994 MB
swap c1t0d0s3 516 MB
/opt c1t0d0s5 34 MB
/usr c1t0d0s6 2126 MB
/export/home c1t0d0s7 67098 MB
F2_Continue F3_Go Back F4_Customize F5_Exit F6_Help
由于系统缺省的分区大小不合理，因此按F4，修改分区大小，出现如下提示：
Customize Disk: c1t0d0
Boot Device: c1t0d0s0
Entry: / Recommended: 110 MB Minimum: 95 MB
==========================================================
Slice Mount Point Size (MB)
0 / 144
1 /var 74
2 overlap 69994
3 swap 516
4 0
5 /opt 34
6 /usr 2126
7 /export/home 67098
=======================================================
Capacity: 69994 MB
Allocated: 69992 MB
Rounding Error: 2 MB
Free: 0 MB
F2_OK F4_Options F5_Cancel F6_Help
修改前，删除Slice 7那一行的所有信息（7 /export/home 67098）。
使用Tab键或上下左右键，移动光标到Slice 7处，删除该行。然后将分区修改为如下：
Entry: Recommended: MB Minimum: MB
=======================================================
Slice Mount Point Size (MB)
0 / 4099
1 /var 4099
2 overlap 69994
3 swap 16386
4 0
5 /opt 10240
6 /usr 10240
7 0
=======================================================
Capacity: 69994 MB
Allocated: 45064 MB
Rounding Error: 2 MB
Free: 24928 MB
按F2键继续安装；
34、出现如下提示：
File System and Disk Layout
The summary below is your current file system and disk layout, based on the
information you've supplied.
NOTE: If you choose to customize, you should understand file systems, their
intended purpose on the disk, and how changing them may affect the operation
of the system.
File system/Mount point Disk/Slice Size
=========================================
/ c1t0d0s0 4099 MB
/var c1t0d0s1 4099 MB
overlap c1t0d0s2 69994 MB
swap c1t0d0s3 16386 MB
/opt c1t0d0s5 10240 MB
/usr c1t0d0s6 10240 MB
F2_Continue F3_Go Back F4_Customize F5_Exit F6_Help
按F2继续安装；
35、出现如下提示：
Mount Remote File Systems?
Do you want to mount software from a remote file server? This may be
necessary if you had to remove software because of disk space problems.
F2_Continue F3_Go Back F4_Remote Mounts F5_Exit F6_Help
按F2继续安装；
36、出现如下提示：
Profile
The information shown below is your profile for installing Solaris software.
It reflects the choices you've made on previous screens.
=======================================================
- Installation Option: Initial
x Boot Device: c1t0d0
x Client Services: None
x
x Locales: Simplified Chinese EUC
x Simplified Chinese GB18030
x Simplified Chinese GBK
x Simplified Chinese UTF-8
x Traditional Chinese (Hong Kong) BIG
x Traditional Chinese (Hong Kong) UTF
x Traditional Chinese BIG5
x Traditional Chinese EUC
x Traditional Chinese UTF-8
v
F2_Continue F4_Change F5_Exit F6_Help
按F2继续安装；
37、出现如下提示：
Warning
The following disk configuration condition(s) have been
detected. Errors must be fixed to ensure a successful
installation. Warnings can be ignored without causing the
installation to fail.
WARNING: Unused disk space (c1t0d0)
WARNING: CHANGING DEFAULT BOOT DEVICE
You have either explicitly changed the default boot device, or
accepted the default to "Reconfigure EEPROM". In either case,
the system's EEPROM will be changed so it will always boot
Solaris from the device that you've specified. If this is not
what you had in mind, go back to the disk selection screens and
change the "Reconfigure EEPROM" setting.
F2_OK F5_Cancel
按F2继续安装；
38、出现如下提示：
Reboot After Installation?
After Solaris software is installed, the system must be rebooted. You can
choose to have the system automatically reboot, or you can choose to
manually reboot the system if you want to run scripts or do other
customizations before the reboot. You can manually reboot a system by using
the reboot(1M) command.
[X] Auto Reboot
[ ] Manual Reboot
F2_Begin Installation F5_Cancel
设置安装结束后，自动重启动。按F2继续安装；
39、出现如下提示：
Preparing system for Solaris install
Configuring disk (c1t0d0)
- Creating Solaris disk label (VTOC)
Creating and checking UFS file systems
- Creating / (c1t0d0s0)
- Creating /var (c1t0d0s1)
- Creating /opt (c1t0d0s5)
- Creating /usr (c1t0d0s6)
Solaris Initial Install
MBytes Installed: 52.22
MBytes Remaining: 1528.16
Installing: Core Solaris Devices
|
| | | | | |
0 20 40 60 80 100
（正在安装Solaris Software 1/2 CD盘，请等待）
Solaris 9 software installation partially failed
Solaris 9 packages partially installed
SUNWidecr
Customizing system files
- Mount points table (/etc/vfstab)
- Network host addresses (/etc/hosts)
Cleaning devices
Customizing system devices
- Physical devices (/devices)
- Logical devices (/dev)
Installing boot information
- Installing boot blocks (c1t0d0s0)
- Updating system firmware for automatic rebooting
Installation log location
- /a/var/sadm/system/logs/install_log (before reboot)
- /var/sadm/system/logs/install_log (after reboot)
Install of CD 1 complete. The system will ask you for CD 2 after you reboot.
Executing SolStart postinstall phase...
Executing finish script "patch_finish"...
Finish script patch_finish execution completed.
Executing JumpStart postinstall phase...
The begin script log 'begin.log'
is located in /var/sadm/system/logs after reboot.
The finish script log 'finish.log'
is located in /var/sadm/system/logs after reboot.
syncing file systems... done
rebooting...
Resetting ...
*** FCode LP8000 PCI_Bus (lpfc) Version 1.31a5 ***
*** FCode LP8000 PCI_Bus (lpfc) Version 1.31a5 ***
Sun Fire 880, No Keyboard
Copyright 1998-2002 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.7.5, 4096 MB memory installed, Serial #53419230.
Ethernet address 0:3:ba:2f:1c:de, Host ID: 832f1cde.
Rebooting with command: boot
Boot device: /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@w500000e01042dc11,0:a File an
d args:
SunOS Release 5.9 Version Generic_112233-03 64-bit
Copyright 1983-2002 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
configuring IPv4 interfaces: ce0.
Hostname: rac2
Configuring /dev and /devices
Configuring the /dev directory (compatibility devices)
The system is coming up. Please wait.
checking ufs filesystems
/dev/rdsk/c1t0d0s5: is clean.
Configuring network interface addresses: ce0 eri0 ge0.
starting rpc services: rpcbind done.
On this screen you can create a root password.
A root password can contain any number of characters, but only the first eight
characters in the password are significant. (For example, if you create
`a1b2c3d4e5f6' as your root password, you can use `a1b2c3d4' to gain root
access.)
You will be prompted to type the root password twice; for security, the password
will not be displayed on the screen as you type it.
> If you do not want a root password, press RETURN twice.
Root password:
Press Return to continue.
40、系统提示你设置超级用户root的密码，本例中，输入root123后，出现如下提示：
On this screen you can create a root password.
A root password can contain any number of characters, but only the first eight
characters in the password are significant. (For example, if you create
`a1b2c3d4e5f6' as your root password, you can use `a1b2c3d4' to gain root
access.)
You will be prompted to type the root password twice; for security, the password
will not be displayed on the screen as you type it.
> If you do not want a root password, press RETURN twice.
Root password:
Re-enter your root password.
Press Return to continue.
41、系统提示你再次输入超级用户root的密码，本例中，再次输入root123，出现如下提示：
System identification is completed.
Setting netmask of ce0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway rac2
syslog service starting.
Aug 18 11:31:00 rac2 sendmail[369]: My unqualified host name (rac2) unknown; sle
eping for retry
Aug 18 11:32:00 rac2 sendmail[369]: unable to qualify my own domain name (rac2)
-- using short name
WARNING: local host name (rac2) is not qualified; fix $j in config file
/etc/mail/aliases: 12 aliases, longest 10 bytes, 138 bytes total
Starting Web Start Launcher in Command Line Mode.
Please specify the media from which you will install Solaris 9 Software 2 of 2
(12/02 SPARC Platform Edition).
Alternatively, choose the selection for "Skip" to skip this disc and go on to
the next one.
Media:
1. CD/DVD
2. Network File System
3. Skip
Media [1]:
42、提示你插入Solaris 9 Software 2/2 CD光盘。敲回车键，光盘弹出，并出现如下提示符：
Please insert the CD/DVD for Solaris 9 Software 2 of 2 (12/02 SPARC Platform
Edition).
After you insert the disc, please press Enter.
Enter S to skip this disc and go on to the next one.
To select a different media, enter B to go Back.
[]
43、将Solaris 9 Software 2/2 CD光盘插入CD-ROM，等待一会（大约15秒）后，按回车键继续安装；
Reading Solaris 9 Software 2 of 2 (12/02 SPARC Platform Edition).... -
Launching installer for Solaris 9 Software 2 of 2 (12/02 SPARC Platform
Edition). Please Wait...
Installing Solaris 9 packages (part 2)
（等待安装Solaris 9 Software 2/2光盘）
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installation details:
Product Result More Info
1. Solaris 9 packages (part 2) Installed Available
2. Done
Enter the number corresponding to the desired selection for more
information, or enter 2 to continue [2]:
43、提示你Solaris 9 Software 2/2 CD光盘已经安装完毕，敲回车键出现提示：
Please specify the media from which you will install Solaris 9 Languages (12/02
SPARC Platform Edition).
Alternatively, choose the selection for "Skip" to skip this disc and go on to
the next one.
Media:
1. CD/DVD
2. Network File System
3. Skip
Media [1]:
44、敲回车键，弹出光盘，出现如下提示：
Please insert the CD/DVD for Solaris 9 Languages (12/02 SPARC Platform Edition).
After you insert the disc, please press Enter.
Enter S to skip this disc and go on to the next one.
To select a different media, enter B to go Back.
[]
提示你将Solaris Languages光盘放入CD-ROM中；
45、将Solaris Languages光盘放入后等待15秒左右，然后敲回车键，
出现如下提示：
Reading Solaris 9 Languages (12/02 SPARC Platform Edition).... -
Launching installer for Solaris 9 Languages (12/02 SPARC Platform Edition).
Please Wait...
The following items will be installed:
Product: Solaris 9 Simplified Chinese Localization
Location: /usr
Size: 131.0 MB
--------------------------------------------------
Solaris 9 Simplified Chinese EUC Localization 3.2 MB
Solaris 9 Simplified Chinese Common Localization 125.1 MB
SunOS 4.x Asian Compatibility Localization 4 KB
Asian User Defined Character Tool for CDE 2.7 MB
Product: Solaris 9 Traditional Chinese Localization
Location: /usr
Size: 101.5 MB
---------------------------------------------------
Solaris 9 Traditional Chinese Common Localization 71.9 MB
Solaris 9 Traditional Chinese Localization 29.6 MB
SunOS 4.x Asian Compatibility Localization 4 KB
Asian User Defined Character Tool for CDE 2.7 MB
Product: Solaris 9 Hong Kong Traditional Chinese Localization
Location: /usr
Size: 10.6 MB
-------------------------------------------------------------
Solaris 9 Traditional Chinese Common Localization 71.9 MB
SunOS 4.x Asian Compatibility Localization 4 KB
Solaris 9 Traditional Chinese HK Localization 10.6 MB
Asian User Defined Character Tool for CDE 2.7 MB
Ready to Install
1. Install Now
2. Start Over
3. Exit Installation
What would you like to do [1]?
敲回车键后开始安装Solaris Languages光盘；
Installing Solaris 9 Simplified Chinese Localization
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installing Solaris 9 Traditional Chinese Localization
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installing Solaris 9 Hong Kong Traditional Chinese Localization
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installation details:
Product Result More Info
1. Solaris 9 Simplified Chinese Localization Installed Available
2. Solaris 9 Traditional Chinese Localization Installed Available
3. Solaris 9 Hong Kong Traditional Chinese Localization Installed Available
4. Done
Enter the number corresponding to the desired selection for more
information, or enter 4 to continue [4]:
敲回车键，弹出光盘；
<Press Return to reboot the system> {"!" exits}
[]
再敲回车键，重新启动系统。
至此，系统安装完成。
Automatically Layout File Systems?
Do you want to use auto-layout to automatically layout file systems?
Manually laying out file systems requires advanced system administration
skills.
F2_Auto Layout F3_Go Back F4_Manual Layout F5_Exit F6_Help
提示是否采用自动布局文件系统：本例中，采用自动布局文件系统，所以按F2键继续安装；
32、出现提示：
Automatically Layout File Systems
On this screen you must select all the file systems you want auto-layout to
create, or accept the default file systems shown.
NOTE: For small disks, it may be necessary for auto-layout to break up some
of the file systems you request into smaller file systems to fit the
available disk space. So, after auto-layout completes, you may find file
systems in the layout that you did not select from the list below.
File Systems for Auto-layout
========================================
[X] /
[ ] /opt
[ ] /usr
[ ] /usr/openwin
[ ] /var
[X] swap
F2_Continue F5_Cancel F6_Help
选中以下几项：
[X] /
[X] /opt
[X] /usr
[ ] /usr/openwin（不选）
[X] /var
[X] swap
然后按F2键继续安装；
33、出现提示：
File System and Disk Layout
The summary below is your current file system and disk layout, based on the
information you've supplied.
NOTE: If you choose to customize, you should understand file systems, their
intended purpose on the disk, and how changing them may affect the operation
of the system.
File system/Mount point Disk/Slice Size
================================================
/ c1t0d0s0 144 MB
/var c1t0d0s1 74 MB
overlap c1t0d0s2 69994 MB
swap c1t0d0s3 516 MB
/opt c1t0d0s5 34 MB
/usr c1t0d0s6 2126 MB
/export/home c1t0d0s7 67098 MB
F2_Continue F3_Go Back F4_Customize F5_Exit F6_Help
由于系统缺省的分区大小不合理，因此按F4，修改分区大小，出现如下提示：
Customize Disk: c1t0d0
Boot Device: c1t0d0s0
Entry: / Recommended: 110 MB Minimum: 95 MB
==========================================================
Slice Mount Point Size (MB)
0 / 144
1 /var 74
2 overlap 69994
3 swap 516
4 0
5 /opt 34
6 /usr 2126
7 /export/home 67098
=======================================================
Capacity: 69994 MB
Allocated: 69992 MB
Rounding Error: 2 MB
Free: 0 MB
F2_OK F4_Options F5_Cancel F6_Help
修改前，删除Slice 7那一行的所有信息（7 /export/home 67098）。
使用Tab键或上下左右键，移动光标到Slice 7处，删除该行。然后将分区修改为如下：
Entry: Recommended: MB Minimum: MB
=======================================================
Slice Mount Point Size (MB)
0 / 4099
1 /var 4099
2 overlap 69994
3 swap 16386
4 0
5 /opt 10240
6 /usr 10240
7 0
=======================================================
Capacity: 69994 MB
Allocated: 45064 MB
Rounding Error: 2 MB
Free: 24928 MB
按F2键继续安装；
34、出现如下提示：
File System and Disk Layout
The summary below is your current file system and disk layout, based on the
information you've supplied.
NOTE: If you choose to customize, you should understand file systems, their
intended purpose on the disk, and how changing them may affect the operation
of the system.
File system/Mount point Disk/Slice Size
=========================================
/ c1t0d0s0 4099 MB
/var c1t0d0s1 4099 MB
overlap c1t0d0s2 69994 MB
swap c1t0d0s3 16386 MB
/opt c1t0d0s5 10240 MB
/usr c1t0d0s6 10240 MB
F2_Continue F3_Go Back F4_Customize F5_Exit F6_Help
按F2继续安装；
35、出现如下提示：
Mount Remote File Systems?
Do you want to mount software from a remote file server? This may be
necessary if you had to remove software because of disk space problems.
F2_Continue F3_Go Back F4_Remote Mounts F5_Exit F6_Help
按F2继续安装；
36、出现如下提示：
Profile
The information shown below is your profile for installing Solaris software.
It reflects the choices you've made on previous screens.
=======================================================
- Installation Option: Initial
x Boot Device: c1t0d0
x Client Services: None
x
x Locales: Simplified Chinese EUC
x Simplified Chinese GB18030
x Simplified Chinese GBK
x Simplified Chinese UTF-8
x Traditional Chinese (Hong Kong) BIG
x Traditional Chinese (Hong Kong) UTF
x Traditional Chinese BIG5
x Traditional Chinese EUC
x Traditional Chinese UTF-8
v
F2_Continue F4_Change F5_Exit F6_Help
按F2继续安装；
37、出现如下提示：
Warning
The following disk configuration condition(s) have been
detected. Errors must be fixed to ensure a successful
installation. Warnings can be ignored without causing the
installation to fail.
WARNING: Unused disk space (c1t0d0)
WARNING: CHANGING DEFAULT BOOT DEVICE
You have either explicitly changed the default boot device, or
accepted the default to "Reconfigure EEPROM". In either case,
the system's EEPROM will be changed so it will always boot
Solaris from the device that you've specified. If this is not
what you had in mind, go back to the disk selection screens and
change the "Reconfigure EEPROM" setting.
F2_OK F5_Cancel
按F2继续安装；
38、出现如下提示：
Reboot After Installation?
After Solaris software is installed, the system must be rebooted. You can
choose to have the system automatically reboot, or you can choose to
manually reboot the system if you want to run scripts or do other
customizations before the reboot. You can manually reboot a system by using
the reboot(1M) command.
[X] Auto Reboot
[ ] Manual Reboot
F2_Begin Installation F5_Cancel
设置安装结束后，自动重启动。按F2继续安装；
39、出现如下提示：
Preparing system for Solaris install
Configuring disk (c1t0d0)
- Creating Solaris disk label (VTOC)
Creating and checking UFS file systems
- Creating / (c1t0d0s0)
- Creating /var (c1t0d0s1)
- Creating /opt (c1t0d0s5)
- Creating /usr (c1t0d0s6)
Solaris Initial Install
MBytes Installed: 52.22
MBytes Remaining: 1528.16
Installing: Core Solaris Devices
|
| | | | | |
0 20 40 60 80 100
（正在安装Solaris Software 1/2 CD盘，请等待）
Solaris 9 software installation partially failed
Solaris 9 packages partially installed
SUNWidecr
Customizing system files
- Mount points table (/etc/vfstab)
- Network host addresses (/etc/hosts)
Cleaning devices
Customizing system devices
- Physical devices (/devices)
- Logical devices (/dev)
Installing boot information
- Installing boot blocks (c1t0d0s0)
- Updating system firmware for automatic rebooting
Installation log location
- /a/var/sadm/system/logs/install_log (before reboot)
- /var/sadm/system/logs/install_log (after reboot)
Install of CD 1 complete. The system will ask you for CD 2 after you reboot.
Executing SolStart postinstall phase...
Executing finish script "patch_finish"...
Finish script patch_finish execution completed.
Executing JumpStart postinstall phase...
The begin script log 'begin.log'
is located in /var/sadm/system/logs after reboot.
The finish script log 'finish.log'
is located in /var/sadm/system/logs after reboot.
syncing file systems... done
rebooting...
Resetting ...
*** FCode LP8000 PCI_Bus (lpfc) Version 1.31a5 ***
*** FCode LP8000 PCI_Bus (lpfc) Version 1.31a5 ***
Sun Fire 880, No Keyboard
Copyright 1998-2002 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.7.5, 4096 MB memory installed, Serial #53419230.
Ethernet address 0:3:ba:2f:1c:de, Host ID: 832f1cde.
Rebooting with command: boot
Boot device: /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@w500000e01042dc11,0:a File an
d args:
SunOS Release 5.9 Version Generic_112233-03 64-bit
Copyright 1983-2002 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
configuring IPv4 interfaces: ce0.
Hostname: rac2
Configuring /dev and /devices
Configuring the /dev directory (compatibility devices)
The system is coming up. Please wait.
checking ufs filesystems
/dev/rdsk/c1t0d0s5: is clean.
Configuring network interface addresses: ce0 eri0 ge0.
starting rpc services: rpcbind done.
On this screen you can create a root password.
A root password can contain any number of characters, but only the first eight
characters in the password are significant. (For example, if you create
`a1b2c3d4e5f6' as your root password, you can use `a1b2c3d4' to gain root
access.)
You will be prompted to type the root password twice; for security, the password
will not be displayed on the screen as you type it.
> If you do not want a root password, press RETURN twice.
Root password:
Press Return to continue.
40、系统提示你设置超级用户root的密码，本例中，输入root123后，出现如下提示：
On this screen you can create a root password.
A root password can contain any number of characters, but only the first eight
characters in the password are significant. (For example, if you create
`a1b2c3d4e5f6' as your root password, you can use `a1b2c3d4' to gain root
access.)
You will be prompted to type the root password twice; for security, the password
will not be displayed on the screen as you type it.
> If you do not want a root password, press RETURN twice.
Root password:
Re-enter your root password.
Press Return to continue.
41、系统提示你再次输入超级用户root的密码，本例中，再次输入root123，出现如下提示：
System identification is completed.
Setting netmask of ce0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway rac2
syslog service starting.
Aug 18 11:31:00 rac2 sendmail[369]: My unqualified host name (rac2) unknown; sle
eping for retry
Aug 18 11:32:00 rac2 sendmail[369]: unable to qualify my own domain name (rac2)
-- using short name
WARNING: local host name (rac2) is not qualified; fix $j in config file
/etc/mail/aliases: 12 aliases, longest 10 bytes, 138 bytes total
Starting Web Start Launcher in Command Line Mode.
Please specify the media from which you will install Solaris 9 Software 2 of 2
(12/02 SPARC Platform Edition).
Alternatively, choose the selection for "Skip" to skip this disc and go on to
the next one.
Media:
1. CD/DVD
2. Network File System
3. Skip
Media [1]:
42、提示你插入Solaris 9 Software 2/2 CD光盘。敲回车键，光盘弹出，并出现如下提示符：
Please insert the CD/DVD for Solaris 9 Software 2 of 2 (12/02 SPARC Platform
Edition).
After you insert the disc, please press Enter.
Enter S to skip this disc and go on to the next one.
To select a different media, enter B to go Back.
[]
43、将Solaris 9 Software 2/2 CD光盘插入CD-ROM，等待一会（大约15秒）后，按回车键继续安装；
Reading Solaris 9 Software 2 of 2 (12/02 SPARC Platform Edition).... -
Launching installer for Solaris 9 Software 2 of 2 (12/02 SPARC Platform
Edition). Please Wait...
Installing Solaris 9 packages (part 2)
（等待安装Solaris 9 Software 2/2光盘）
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installation details:
Product Result More Info
1. Solaris 9 packages (part 2) Installed Available
2. Done
Enter the number corresponding to the desired selection for more
information, or enter 2 to continue [2]:
43、提示你Solaris 9 Software 2/2 CD光盘已经安装完毕，敲回车键出现提示：
Please specify the media from which you will install Solaris 9 Languages (12/02
SPARC Platform Edition).
Alternatively, choose the selection for "Skip" to skip this disc and go on to
the next one.
Media:
1. CD/DVD
2. Network File System
3. Skip
Media [1]:
44、敲回车键，弹出光盘，出现如下提示：
Please insert the CD/DVD for Solaris 9 Languages (12/02 SPARC Platform Edition).
After you insert the disc, please press Enter.
Enter S to skip this disc and go on to the next one.
To select a different media, enter B to go Back.
[]
提示你将Solaris Languages光盘放入CD-ROM中；
45、将Solaris Languages光盘放入后等待15秒左右，然后敲回车键，
出现如下提示：
Reading Solaris 9 Languages (12/02 SPARC Platform Edition).... -
Launching installer for Solaris 9 Languages (12/02 SPARC Platform Edition).
Please Wait...
The following items will be installed:
Product: Solaris 9 Simplified Chinese Localization
Location: /usr
Size: 131.0 MB
--------------------------------------------------
Solaris 9 Simplified Chinese EUC Localization 3.2 MB
Solaris 9 Simplified Chinese Common Localization 125.1 MB
SunOS 4.x Asian Compatibility Localization 4 KB
Asian User Defined Character Tool for CDE 2.7 MB
Product: Solaris 9 Traditional Chinese Localization
Location: /usr
Size: 101.5 MB
---------------------------------------------------
Solaris 9 Traditional Chinese Common Localization 71.9 MB
Solaris 9 Traditional Chinese Localization 29.6 MB
SunOS 4.x Asian Compatibility Localization 4 KB
Asian User Defined Character Tool for CDE 2.7 MB
Product: Solaris 9 Hong Kong Traditional Chinese Localization
Location: /usr
Size: 10.6 MB
-------------------------------------------------------------
Solaris 9 Traditional Chinese Common Localization 71.9 MB
SunOS 4.x Asian Compatibility Localization 4 KB
Solaris 9 Traditional Chinese HK Localization 10.6 MB
Asian User Defined Character Tool for CDE 2.7 MB
Ready to Install
1. Install Now
2. Start Over
3. Exit Installation
What would you like to do [1]?
敲回车键后开始安装Solaris Languages光盘；
Installing Solaris 9 Simplified Chinese Localization
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installing Solaris 9 Traditional Chinese Localization
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installing Solaris 9 Hong Kong Traditional Chinese Localization
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installation details:
Product Result More Info
1. Solaris 9 Simplified Chinese Localization Installed Available
2. Solaris 9 Traditional Chinese Localization Installed Available
3. Solaris 9 Hong Kong Traditional Chinese Localization Installed Available
4. Done
Enter the number corresponding to the desired selection for more
information, or enter 4 to continue [4]:
敲回车键，弹出光盘；
<Press Return to reboot the system> {"!" exits}
[]
再敲回车键，重新启动系统。
至此，系统安装完成。