101、102机器
haproxy设置
1. 解压文件并进入解压文件夹
tar xvf haproxy-1.9.8.tar.gz
cd haproxy-1.9.8
2. 编译安装haproxy，编译参数
make ARCH=x86_64 TARGET=linux2628 USE_PCRE=1 USE_OPENSSL=1 USE_ZLIB=1 USE_SYSTEMD=1 USE_CPU_AFFINITY=1 PREFIX=/usr/local/haproxy
make install PREFIX=/usr/local/haproxy
4. 拷贝二进制执行文件入PATH路径
cp haproxy /usr/sbin/
5. 修改systemctl启动文件
vim /usr/lib/systemd/system/haproxy.service
[Unit]
Description=HAProxy Load Banlancer
After=syslog.target network.target
[Service]
ExecStartPre=/usr/sbin/haproxy -f /etc/haproxy/haproxy.cfg -c -q
ExecStart=/usr/sbin/haproxy -Ws -f /etc/haproxy/haproxy.cfg -p /run/haproxy.pid
ExecReload=/bin/kill -USR2 $MAINPID
[Install]
WantedBy=multi-user.target6. 创建配置和pid文件夹，并授权
mkdir /etc/haproxy
useradd -r -s /sbin/nologin haproxy
mkdir /var/lib/haproxy
chown haproxy.haproxy /var/lib/haproxy -R
7. 修改配置文件，如下
vim /etc/haproxy/haproxy.cfg
global
maxconn 65536
chroot /usr/local/haproxy
stats socket /var/lib/haproxy/haproxy.sock mode 600 level admin （打开socket文件，也可以不打开注释掉）
uid 1000
gid 1000
daemon
nbproc 1
cpu-map 1 0
#cpu-map 2 1
#cpu-map 3 2
#cpu-map 4 3
spread-checks 5
pidfile /run/haproxy.pid
#log 127.0.0.1 local3 info
defaults
option http-keep-alive
option forwardfor
maxconn 65536
mode http
timeout connect 300000ms
timeout client 300000ms
timeout server 300000ms
#HTTP访问入口===============================================================
listen web_http
bind 192.168.66.101:80
mode tcp
#log global
balance roundrobin
server web1 192.168.66.103:80 check inter 3000 fall 2 rise 5
server web2 192.168.66.104:80 check inter 3000 fall 2 rise 5 keepalived设置
1. 安装keepalived软件
yum install keepalived
2. 修改配置文件
vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
[email protected]
}
notification_email_from [email protected]
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id s2.pengbo.com （防止名字冲突，建议两台机器改为不同名的机器）
vrrp_skip_check_adv_addr
#vrrp_strict
vrrp_iptables
vrrp_garp_interval 0
vrrp_gna_interval 0
}
vrrp_instance VIP1 {
state MASTER (102机器改为BACKUP)
interface eth0
virtual_router_id 66 （在同一网段内，要保证该值不冲突）
priority 100 （102机器应改为低于100的值）
advert_int 2
unicast_src_ip 192.168.66.102 （这个地方填写本机地址）
unicast_peer {
192.168.66.101 （填写一起监听的keepalive机器）
}
authentication {
auth_type PASS
auth_pass linux36
}
virtual_ipaddress {
192.168.66.200 dev eth0 label eth0:0 （设置一个虚拟vip地址）
}
} 修改内核参数
1. 修改配置文件
vim /etc/sysctl.conf
net.ipv4.ip_forward = 1 (打开转发功能)
net.ipv4.ip_nonlocal_bind = 1 （使其能够监听自身没有的IP地址） 2. 使配置文件参数起效
sysctl -p
3. 启动服务
systemctl start haproxy keepalived
103、104机器
编译安装nginx
1. 编译安装nginx
tar xf nginx-1.16.0.tar.gz
./configure --prefix=/apps/nginx --user=nginx --group=nginx --with-http_ssl_module --with-http_v2_module --with-http_realip_module --with-http_stub_status_module --with-http_gzip_static_module --with-pcre --with-stream --with-stream_ssl_module --with-stream_realip_module
make
make install
2. 创建系统用户nginx
useradd -r -s /usr/sbin/nologin nginx
3. 修改nginx的systemctl服务文件
vim nginx.service
[Unit]
Description=nginx - high performance web server
Documentation=http://nginx.org/en/docs/
After=network-online.target remote-fs.target nss-lookup.target
Wants=network-online.target
[Service]
Type=forking
PIDFile=/apps/nginx/logs/nginx.pid
ExecStart=/apps/nginx/sbin/nginx -c /apps/nginx/conf/nginx.conf
ExecReload=/bin/kill -s HUP $MAINPID
ExecStop=/bin/kill -s TERM $MAINPID
[Install]
WantedBy=multi-user.targetmv nginx.service /usr/lib/systemd/system/
4. 创建软链接，将nginx二进制文件加入到PATH变量中
ln -sv /apps/nginx/sbin/nginx /usr/sbin/
5. 修改nginx配置文件
vim /apps/nginx/conf/nginx.conf
user nginx;
worker_processes auto;
pid logs/nginx.pid;
给wordpress单独建一个访问路径
location /wordpress {
root html;
index index.php index.htm;
}
打开PHP功能
location ~ \.php$ {
root /apps/nginx/html;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
}6. 启动服务
nginx
7. 创建一个挂载nfs的文件夹
mkdir /apps/nginx/html/wordpress
编译安装php-fpm
1. 安装开发软件包
yum install libxml2-devel bzip2-devel libmcrypt-devel bzip2
2. 编译安装参数
tar xvf php-7.3.5
./configure --prefix=/app/php --enable-mysqlnd --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --with-openssl --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --with-config-file-path=/etc --with-config-file-scan-dir=/etc/php.d --enable-mbstring --enable-xml --enable-sockets --enable-fpm --enable-maintainer-zts --disable-fileinfo
make && make install
3. 拷贝配置文件
cp php.ini-production /etc/php.ini
4. 修改配置文件时区
vim /etc/php.ini
[Date]
; Defines the default timezone used by the date functions
; http://php.net/date.timezone
date.timezone = "Asia/Shanghai"5. 移动service启动脚本
cp php-7.3.5/sapi/fpm/init.d.php-fpm /etc/init.d/php-fpm
chmod +x /etc/init.d/php-fpm
或者 cp php-7.3.5/sapi/fpm/php-fpm.service /usr/lib/systemd/system/
6. 拷贝主配置文件
cp /app/php/etc/php-fpm.conf.default /app/php/etc/php-fpm.conf
cp /app/php/etc/php-fpm.d/www.conf.default /app/php/etc/php-fpm.d/www.conf
7. 修改主配置文件中的所属者所属组
vim /app/php/etc/php-fpm.d/www.conf
user = nginx
group = nginx8. 启动服务
systemctl start php-fpm 或者 service php-fpm start
105机器
wordpress文件解压
1. 解压（将解压包放在/data/目录下）
unzip wordpress-5.2.1.zip
cd wordpress
2. 修改主配置文件模板，连接数据库
cp wp-config-sample.php wp-config.php
vim wp-config.php
define( 'DB_NAME', 'wordpress' );
/** MySQL database username */
define( 'DB_USER', 'wordpress' );
/** MySQL database password */
define( 'DB_PASSWORD', '123456' );
/** MySQL hostname */
define( 'DB_HOST', '192.168.66.106' );
/** Database Charset to use in creating database tables. */
define( 'DB_CHARSET', 'utf8' );
/** The Database Collate type. Don't change this if in doubt. */
define( 'DB_COLLATE', '' );存储服务器nfs
1. 启动服务（一般系统都默认安装）
systemctl start nfs
2. 修改配置文件
vim /etc/exports
/data/wordpress *(rw,no_root_squash)3. 重新加载配置文件
exportfs -r
挂载文件
mount 192.168.66.105:/data/wordpress /apps/nginx/html/wordpress/ (在103、104机器上操作)
chown -R nginx.nginx /apps/nginx/html/wordpress/ (在103、104机器上操作)
106机器
二进制编译安装mariadb
1. 安装环境开发包
yum install bison bison-devel zlib-devel libcurl-devel libarchive-devel boostdevel gcc gcc-c++ cmake ncurses-devel gnutls-devel libxml2-devel openssldevel libevent-devel libaio-devel
2. 解压二进制文件
tar xvf mariadb-10.2.23-linux-x86_64.tar.gz -C /usr/local/
3. 进入解压文件夹，创建软链接和修改权限
cd /usr/local
ln -sv mariadb-10.2.23-linux-x86_64/ mysql
chown -R root.root mysql/
4. 创建mysql数据使用的系统账户
useradd -r -s /sbin/nologin mysql -d /data/mysql
mkdir /data/mysql
chown mysql.mysql /data/mysql
5. 进入mysql主文件夹，执行安装脚本
cd mysql/
scripts/mysql_install_db --user=mysql --datadir=/data/mysql
6. 创建配置文件夹，并修改配置文件
mkdir /etc/mysql
cp support-files/my-huge.cnf /etc/mysql/my.cnf
vim /etc/mysql/my.cnf
[mysqld]
datadir=/data/mysql
port = 3306
socket = /tmp/mysql.sock
skip-external-locking
key_buffer_size = 384M
max_allowed_packet = 1M
table_open_cache = 512
sort_buffer_size = 2M
read_buffer_size = 2M
read_rnd_buffer_size = 8M
myisam_sort_buffer_size = 64M
thread_cache_size = 8
query_cache_size = 32M7. 将mysql加入到启动服务脚本
cp support-files/mysql.server /etc/init.d/mysqld
chkconfig --add mysqld
chkconfig --list
8. 设置环境变量文件，并起效
vim /etc/profile.d/lamp.sh
PATH=/usr/local/mysql/bin:$PATH
. /etc/profile.d/lamp.sh
9. 启动服务
service mysqld start
10. 创建wordpress数据库和创建一个wordpress使用的账户
mysql
create database wordpress;
grant all on wordpress.* to wordpress@'192.168.66.%' identified by '123456';107、108机器
1. 安装keepalived
yum install keepalived
2. 修改配置文件
vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
[email protected]
[email protected]
[email protected]
}
notification_email_from [email protected]
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id s3.pengbo.com
vrrp_skip_check_adv_addr
vrrp_iptables
#vrrp_strict
vrrp_garp_interval 0
vrrp_gna_interval 0
}
vrrp_instance VIP2 {
state MASTER （区分主从）
interface eth0
virtual_router_id 99
priority 100 （主和从优先级要不一样）
advert_int 2
unicast_src_ip 192.168.66.107 (这个地方填写本机地址）
unicast_peer {
192.168.66.108 (这个地方填写另外一个监视地址)
}
authentication {
auth_type PASS
auth_pass linux36
}
virtual_ipaddress {
192.168.66.202 dev eth0 label eth0:0
}
}
include /etc/keepalived/conf/*.conf (导入子配置文件)3. 创建子配置文件，并写规则
mkdir /etc/keepalived/conf
vim /etc/keepalived/conf/lvs.conf
virtual_server 192.168.66.202 80 {
delay_loop 6
lb_algo wrr
lb_kind DR
#persistence_timeout 20
protocol TCP
sorry_server 192.168.66.105 80
real_server 192.168.66.103 80 {
weight 1
TCP_CHECK {
connect_timeout 5
nb_get_retry
delay_before_retry 3
connect_port 80
}
}
real_server 192.168.66.104 80 {
weight 1
TCP_CHECK {
connect_timeout 5
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
}4. 启动服务，并查看规则
systemctl start keepalived
ipvsadm -Ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 192.168.66.202:80 wrr
-> 192.168.66.103:80 Route 1 0 0
-> 192.168.66.104:80 Route 1 0 0 5.在103、104机器上的回环网卡绑定vip地址，并修改内核参数
echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce
echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce
ifconfig lo:1 192.168.66.202 netmask 255.255.255.255