Rviz: fixed frame [world] does not exist

Rviz: fixed frame [world] does not exist

I would like to extend jaco answer as this is an easy solution to a struggle lot of people, including myself run into when starting rosrun --debug rviz rviz (debug for verbose)

The solution is having a publisher for the fixed frame attached to the grid that describes your frame relative to it. This means using the quaternion/euler-angles rviz can transform the coordinate system from the fixed one into your frame. This is sets up a publisher that tells rviz where to put the fixed world frame.

rosrun tf static_transform_publisher 0 0 0 0 0 0 1 map my_frame 10

The one is necessary as its the quaternion identity 0 0 0 1.

The doc says this:
static_transform_publisher x y z qx qy qz qw frame_id child_frame_id period_in_ms

or in eulers as jaco did
static_transform_publisher x y z yaw pitch roll frame_id child_frame_id period_in_ms

having this publisher running the global status of the fixed frame is known and the Fixed Frame No tf data. Actual error: Fixed Frame [map] does not exist disappears.

https://answers.ros.org/question/195962/rviz-fixed-frame-world-does-not-exist/

rosrun tf static_transform_publisher 0 0 0 0 0 0 1 map base_footprint 10