南棱笑笑生

20230604给coolpi4b开发板刷机的LOG

20230604给coolpi4b开发板刷机的LOG
2023/6/4 23:49

IMG
I:\BaiduNetdiskDownload\20230317[在线刷机]-RKDevTool专用镜像

I:\BaiduNetdiskDownload\20230317[在线刷机]-RKDevTool专用镜像\Windows驱动程序\DriverAssitant_v5.12.zip

I:\BaiduNetdiskDownload\20230317[在线刷机]-RKDevTool专用镜像\Windows刷机工具\RKDevTool_Release_v2.92.zip

https://www.cool-pi.com/topic/127/coolpi-4b-%E9%95%9C%E5%83%8F%E5%9B%BA%E4%BB%B6%E5%9C%A8%E7%BA%BF%E5%88%B7%E6%9C%BA%E6%96%B9%E6%B3%95
Coolpi 4b 镜像固件在线刷机方法

Windows主机环境
必备条件：完成上述硬件刷机环境搭建
如果电脑运行Windows7及以上环境，请使用RKDevTool工具导入img固件进行升级

操作步骤如下：
a) 安装USB驱动
Windows 刷机工具及USB驱动
在线刷机专用镜像百度网盘

https://pan.baidu.com/s/1DVmWH4uvewYDJOK7mPu10Q?pwd=mqez#list/path=%2F
https://pan.baidu.com/s/1DVmWH4uvewYDJOK7mPu10Q

H:\BaiduNetdiskDownload\20230317[在线刷机]-RKDevTool专用镜像
总计13.3GB。

coolpi-4b-buildroot-for-rkdevtool.zip 可以通过DP输出显示。

[BEGIN] 2023/5/28 11:00:55
DDR V1.09 a930779e06 typ 22/11/21-17:50:56
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x6
CH0 RX Vref:29.7%, TX Vref:24.8%,0.0%
CH1 RX Vref:28.7%, TX Vref:23.8%,0.0%
CH2 RX Vref:28.7%, TX Vref:22.8%,0.0%
CH3 RX Vref:28.7%, TX Vref:23.8%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
Boot1 Release Time: Nov 22 2022 14:37:46, version: 1.10
Emmc IO init.
Emmc IO init.
mmc_set_bus_width: 1
SetEmmcClk: 375000, 2, 64
SetEmmcClk: 375000, 2, 64
mmc_set_bus_width: 8
SetEmmcClk: 200000000, 0, 3
Enable PHY CLK: 200000000, timing: 9
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=59640MB
FwPartOffset=2000 , 100000
UsbBoot ...60548
powerOn 60823
SoftReset, 30188479 us
DDR V1.09 a930779e06 typ 22/11/21-17:50:56
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x6
CH0 RX Vref:29.7%, TX Vref:23.8%,0.0%
CH1 RX Vref:29.7%, TX Vref:24.8%,0.0%
CH2 RX Vref:29.7%, TX Vref:22.8%,0.0%
CH3 RX Vref:28.7%, TX Vref:23.8%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
INFO: Preloader serial: 2
NOTICE: BL31: v2.3():v2.3-481-g17b41886e:derrick.huang
NOTICE: BL31: Built : 16:20:07, Dec 7 2022
INFO: spec: 0x13
INFO: ext 32k is valid
INFO: ddr: stride-en 4CH
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO: system boots from cpu-hwid-0
INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO: BL31: Initialising Exception Handling Framework
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INFO: hdmirx_handler: dma not on, ret
I/TC:
I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022年 09月 20日星期二 09:41:09 CST aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9

COOLPI LOADER BY YANYI(Jan 04 2023)

DRAM: 4 GiB
Using default environment

0 2 1 3 6 8 7 9 trsv ln0 mon rx cdr lock timeout
dp@fde50000 disconnected
Monitor has basic audio support
hdmi info isn't saved in main block
mode:1920x1080 bus_format:0x100a
hdmi@fde80000: detailed mode clock 148500 kHz, flags[5]
H: 1920 2008 2052 2200
V: 1080 1084 1089 1125
bus_format: 100a
VOP update mode to: 1920x1080p0, type: HDMI0 for VP0
dclk:148500,if_pixclk_div;2,if_dclk_div:4
rockchip_vop2_init: hdmi0_phy_pll may not define
rockchip_vop2_init: hdmi1_phy_pll may not define
assigned-clock-parents's node not define
VP0 set crtc_clock to 148500KHz
VOP VP0 enable Esmart0[356x124->356x124@782x478] fmt[1] addr[0xedf21000]
CEA mode used vic=16
mtmdsclock:148500000
bus_width:0x16a8c8,bit_rate:1485000
hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
hdptx phy pll locked!
hdptx phy lane locked!
dw_hdmi_setup HDMI mode
don't use dsc mode
dw hdmi qp use tmds mode
Autoboot in 1 seconds
trsv ln0 mon rx cdr lock timeout
dp@fde50000 disconnected
VOP VP0 enable Esmart0[356x124->356x124@782x478] fmt[1] addr[0xedf21000]
starting USB...
Bus usb@fc880000: USB EHCI 1.00
scanning bus usb@fc880000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
MMC: no card present
mmc_init: -123, time 2
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
reading /extlinux/extlinux.conf
285 bytes read in 3 ms (92.8 KiB/s)
1: linux coolpi
Retrieving file: /initrd.img
reading /initrd.img
8775086 bytes read in 51 ms (164.1 MiB/s)
Retrieving file: /Image
reading /Image
37573120 bytes read in 208 ms (172.3 MiB/s)
append: root=LABEL=writable rw rootfstype=ext4 console=ttyS0,115200n81 quiet splash plymouth.ignore-serial-consoles vt.global_cursor_default=1 irqchip.gicv3_pseudo_nmi=0 net.ifnames=0 rtleth=ethaddr:1a:59:75:85:23:4a
Retrieving file: /rk3588s-cp4.dtb
reading /rk3588s-cp4.dtb
141830 bytes read in 5 ms (27.1 MiB/s)
## Flattened Device Tree blob at 0x0a100000
Booting using the fdt blob at 0x0a100000
Loading Ramdisk to eb176000, end eb9d45ae ... OK
Loading Device Tree to 00000000eb150000, end 00000000eb175a05 ... OK
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x1f0000000 - 0x200000000 (size: 0x10000000)

Starting kernel ...

I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
[ 5.329543] rk-pcie fe190000.pcie: IRQ msi not found
[ 5.329562] rk-pcie fe190000.pcie: Missing *config* reg space
[ 5.329654] rk-pcie fe190000.pcie: Missing *config* reg space
[ 5.329683] rk-pcie fe190000.pcie: invalid resource
[ 5.332537] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[ 5.333665] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[ 5.333670] rkvdec2_init:1010: No niu aclk reset resource define
[ 5.333674] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[ 5.333677] rkvdec2_init:1013: No niu hclk reset resource define
[ 5.334210] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[ 5.334214] rkvdec2_init:1010: No niu aclk reset resource define
[ 5.334217] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[ 5.334220] rkvdec2_init:1013: No niu hclk reset resource define
[ 5.335939] mpp_iommu_probe:434: failed to get device node
[ 5.335943] mpp_av1dec av1d-master: failed to attach iommu
[ 5.891858] rk806 spi2.0: no sleep-setting state
[ 5.896498] rk806 spi2.0: no reset-setting pinctrl state
[ 5.901814] rk806 spi2.0: no dvs-setting pinctrl state
[ 6.132879] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[ 6.140264] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[ 6.147634] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[ 6.155289] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[ 6.162666] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[ 6.169892] tinker-mcu: send_cmds: send command failed
[ 6.175033] tinker-mcu: tinker_mcu_probe: init_cmd_check failed, -6
[ 6.745806] tinker-ft5406: tinker_ft5406_probe: wait connected timeout
[ 6.764508] : terminal subdev does not exist
[ 6.768782] : terminal subdev does not exist
[ 6.773047] : terminal subdev does not exist
[ 6.777311] : terminal subdev does not exist
[ 6.781576] : get_remote_sensor: video pad[0] is null
[ 6.786621] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 6.793835] : get_remote_sensor: video pad[0] is null
[ 6.798879] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 6.806091] : get_remote_sensor: video pad[0] is null
[ 6.811137] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 6.818346] : get_remote_sensor: video pad[0] is null
[ 6.823390] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 6.831837] rockchip-mipi-csi2: Async registered subdev
[ 6.901071] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[ 6.914063] debugfs: File 'Capture' in directory 'dapm' already present!
[ 6.936224] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
[ 7.264236] debugfs: File 'Left Hp mixer' in directory 'dapm' already present!
[ 7.271457] debugfs: File 'Right Hp mixer' in directory 'dapm' already present!
[ 7.278753] debugfs: File 'HPCP L' in directory 'dapm' already present!
[ 7.285352] debugfs: File 'HPCP R' in directory 'dapm' already present!
[ 7.291954] debugfs: File 'HPVOL L' in directory 'dapm' already present!
[ 7.298640] debugfs: File 'HPVOL R' in directory 'dapm' already present!
[ 7.306832] ov5648 8-0036: could not get default pinstate
[ 7.312223] ov5648 8-0036: could not get sleep pinstate
[ 7.320251] ov5648 8-0036: Unexpected sensor id(000000), ret(-5)
[ 7.327245] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.336379] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.345494] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
[ 7.353318] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.353551] rockchip_headset rk-headset: Can not read property headset_gpio
[ 7.362431] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
[ 7.378404] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[ 7.386924] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[ 7.395433] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[ 7.407558] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
[ 7.438717] RKNPU fdab0000.npu: failed to find power_model node
[ 7.444628] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[ 7.451228] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
writable: clean, 4382/196608 files, 272391/758012 blocks
mount: /dev: devtmpfs already mounted or mount point busy.
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
/bin/modetest
Populating /dev using udev: [ 9.337594] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 9.337603] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 9.337860] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 9.337861] stream_cif_mipi_id0: update sensor info failed -19
[ 9.338503] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 9.338506] rkcif_scale_ch0: update sensor info failed -19
[ 9.338703] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 9.338705] rkcif_scale_ch3: update sensor info failed -19
[ 9.338811] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 9.338813] stream_cif_mipi_id2: update sensor info failed -19
[ 9.339561] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 9.339562] rkcif_tools_id0: update sensor info failed -19
[ 9.343043] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 9.343046] rkcif_scale_ch2: update sensor info failed -19
[ 9.346781] rkcif_tools_id2: update sensor info failed -19
[ 9.351219] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 9.351219] stream_cif_mipi_id3: update sensor info failed -19
[ 9.353370] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 9.353371] rkcif_tools_id1: update sensor info failed -19
[ 9.355854] stream_cif_mipi_id1: update sensor info failed -19
[ 9.380611] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 9.394580] rkcif_scale_ch1: update sensor info failed -19
[ 9.655916] aicbsp: sdio_err:: bus down
[ 10.068529] ieee80211 phy0:
[ 10.068529] *******************************************************
[ 10.068529] ** CAUTION: USING PERMISSIVE CUSTOM REGULATORY RULES **
[ 10.068529] *******************************************************
done
Saving random seed: OK
Will now mount all partitions in /etc/fstab
strings: /dev/block/by-name/misc: No such file or directory
Note: Will skip fsck, remove /.skip_fsck to enable
Handling /dev/root / ext4 rw,noauto 1
/bin/disk-helper: line 328: findmnt: command not found
Handling tmpfs /tmp tmpfs mode=1777 0
Handling tmpfs /run tmpfs mode=0755,nosuid,nodev 0
Handling proc /proc proc defaults 0
Handling devtmpfs /dev devtmpfs defaults 0
Handling devpts /dev/pts devpts mode=0620,ptmxmode=0666,gid=5 0
Handling tmpfs /dev/shm tmpfs nosuid,nodev,noexec 0
Handling sysfs /sys sysfs defaults 0
Handling configfs /sys/kernel/config configfs defaults 0
Handling debugfs /sys/kernel/debug debugfs defaults 0
Handling pstore /sys/fs/pstore pstore defaults 0
Log saved to /tmp/mount-all.log
Starting system message bus: done
starting bootanim... Starting bootanim: 745...
done.
Starting hook: /etc/bootanim.d/gst-bootanim.sh...
wpa_supplicant.conf init
wpa_supplicant.conf init
load wifi modules: insmod: can't insert '/system/lib/modules/bcmdhd.ko': No such file or directory
OK
wl: wl driver adapter not found
Starting bluetoothd: OK
Starting network: OK
Starting seatd: OK
Starting dhcpcd...
dhcpcd-9.4.1 starting
dev: loaded udev
forked to background, child pid 799
Starting ntpd: OK
starting weston... done.
Starting dropbear sshd: OK
Starting pulseaudio: OK
Starting /usr/bin/usbdevice start, log saved to /tmp/usbdevice.log
W: [pulseaudio] main.c: This program is not intended to be run as root (unless --system is specified).
[ 11.394755] dma-pl330 fea30000.dma-controller: fill_queue:2263 Bad Desc(2)
Date: 1970-01-01 UTC
[00:00:06.498] weston 11.0.0
https://wayland.freedesktop.org
Bug reports to: https://gitlab.freedesktop.org/wayland/weston/issues/
Build: 11.0.0
[00:00:06.498] Command line: /usr/bin/weston
[00:00:06.498] OS: Linux, 5.10.110, #5 SMP Wed Feb 1 16:58:12 CST 2023, aarch64
[00:00:06.498] Flight recorder: enabled
[00:00:06.498] warning: XDG_RUNTIME_DIR "/var/run" is not configured
correctly. Unix access mode must be 0700 (current mode is 0755),
and must be owned by the user UID 0 (current owner is UID 0).
Refer to your distribution on how to get it, or
http://www.freedesktop.org/wiki/Specifications/basedir-spec
on how to implement it.
[00:00:06.498] Using config file '/etc/xdg/weston/weston.ini'
[00:00:06.498] Output repaint window is -1 ms maximum.
[00:00:06.499] Loading module '/usr/lib/libweston-11/drm-backend.so'
[00:00:06.502] initializing drm backend
[00:00:06.502] Entering mirror mode.
[00:00:06.502] Trying libseat launcher...
[00:00:06.502] [libseat/libseat.c:73] Seat opened with backend 'seatd'
[00:00:06.502] [libseat/backend/seatd.c:228] Enabling seat
[00:00:06.502] libseat: session control granted
[00:00:06.503] using /dev/dri/card0
[00:00:06.503] DRM: does not support atomic modesetting
[00:00:06.503] DRM: does not support GBM modifiers
[00:00:06.503] DRM: supports picture aspect ratio
[00:00:06.503] Loading module '/usr/lib/libweston-11/gl-renderer.so'
arm_release_ver of this libmali is 'g6p0-01eac0', rk_so_ver is '6'.
[00:00:06.521] EGL version: 1.4 Valhall-"g6p0-01eac0"
[00:00:06.521] EGL vendor: ARM
[00:00:06.521] EGL client APIs: OpenGL_ES
[00:00:06.521] warning: Disabling render GPU timeline and explicit synchronization due to missing EGL_ANDROID_native_fence_sync extension
[00:00:06.521] EGL features:
EGL Wayland extension: yes
context priority: yes
buffer age: no
partial update: yes
swap buffers with damage: no
configless context: yes
surfaceless context: yes
dmabuf support: modifiers
[00:00:06.535] GL version: OpenGL ES 3.2 v1.g6p0-01eac0.ba52c908d926792b8f5fe28f383a2b03
[00:00:06.535] GLSL version: OpenGL ES GLSL ES 3.20
[00:00:06.535] GL vendor: ARM
[00:00:06.535] GL renderer: Mali-LODX
Starting dnsmasq: OK
Starting input-event-daemon: done
[00:00:06.656] GL ES 3.2 - renderer features:
read-back format: ARGB8888
wl_shm 10 bpc formats: yes
wl_shm 16 bpc formats: no
wl_shm half-float formats: yes
internal R and RG formats: yes
OES_EGL_image_external: yes
wl_shm sub-image to texture: yes
[00:00:06.665] event4 - adc-keys: is tagged by udev as: Keyboard
[00:00:06.665] event4 - adc-keys: device is a keyboard
[00:00:06.665] event2 - rockchip,dp0 rockchip,dp0: is tagged by udev as: Switch
[00:00:06.690] event2 - not using input device '/dev/input/event2'
[00:00:06.690] event1 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[00:00:06.690] event1 - Logitech USB Optical Mouse: device set to 1000 DPI
[00:00:06.690] event1 - Logitech USB Optical Mouse: device is a pointer
[00:00:06.691] event0 - rk805 pwrkey: is tagged by udev as: Keyboard
[00:00:06.691] event0 - rk805 pwrkey: device is a keyboard
[00:00:06.691] event3 - rockchip-hdmi0 rockchip-hdmi0: is tagged by udev as: Switch
[00:00:06.713] event3 - not using input device '/dev/input/event3'
[00:00:06.729] libinput: configuring device "adc-keys".
[00:00:06.729] libinput: configuring device "Logitech USB Optical Mouse".
[00:00:06.729] libinput: configuring device "rk805 pwrkey".
root@rk3588:/# [00:00:06.853] DRM: head 'HDMI-A-1' updated, connector 197 is connected, EDID make 'KIG', model 'K22Y', serial '000000000'
Supported EOTF modes: SDR
[00:00:06.853] DRM: head 'HDMI-A-1' found, connector 197 is connected, EDID make 'KIG', model 'K22Y', serial '000000000'
Supported EOTF modes: SDR
[00:00:06.853] DRM: head 'DP-1' updated, connector 211 is disconnected.
[00:00:06.853] DRM: head 'DP-1' found, connector 211 is disconnected.
[00:00:06.853] Registered plugin API 'weston_drm_output_api_v1' of size 32
[00:00:06.853] Color manager: no-op
[00:00:06.853] Output 'HDMI-A-1' attempts EOTF mode: SDR
[00:00:06.853] Output 'HDMI-A-1' using color profile: built-in default sRGB SDR profile
[00:00:06.853] Chosen EGL config details: id: 9 rgba: 8 8 8 0 buf: 24 dep: 0 stcl: 0 int: 0-1 type: win|pbf|swap_preserved vis_id: XRGB8888 (0x34325258)
[00:00:06.853] Initialized backlight for head 'HDMI-A-1', device /sys/class/backlight/backlight
[00:00:06.853] Output HDMI-A-1 (crtc 82) video modes:
[email protected], preferred, current, 148.5 MHz
[email protected], 174.5 MHz
[email protected] 16:9, 148.4 MHz
[email protected] 16:9, 148.5 MHz
[email protected], 119.0 MHz
[email protected], 108.0 MHz
[email protected], 135.0 MHz
[email protected], 108.0 MHz
[email protected], 88.8 MHz
[email protected], 85.5 MHz
[email protected], 108.0 MHz
[email protected], 74.2 MHz
[email protected] 16:9, 74.2 MHz
[email protected] 16:9, 74.2 MHz
[email protected] 16:9, 74.2 MHz
[email protected], 78.8 MHz
[email protected], 75.0 MHz
[email protected], 65.0 MHz
[email protected], 57.3 MHz
[email protected], 49.5 MHz
[email protected], 50.0 MHz
[email protected], 40.0 MHz
[email protected], 36.0 MHz
[email protected] 16:9, 27.0 MHz
[email protected] 16:9, 27.0 MHz
[email protected] 16:9, 27.0 MHz
[email protected], 31.5 MHz
[email protected], 31.5 MHz
[email protected], 30.2 MHz
[email protected] 4:3, 25.2 MHz
[email protected], 25.2 MHz
[email protected], 28.3 MHz
[00:00:06.853] associating input device event4 with output HDMI-A-1 (none by udev)
[00:00:06.853] associating input device event1 with output HDMI-A-1 (none by udev)
[00:00:06.853] associating input device event0 with output HDMI-A-1 (none by udev)
[00:00:06.853] Output 'HDMI-A-1' enabled with head(s) HDMI-A-1
[00:00:06.853] Compositor capabilities:
arbitrary surface rotation: yes
screen capture uses y-flip: yes
cursor planes: yes
arbitrary resolutions: no
view mask clipping: yes
explicit sync: no
color operations: yes
presentation clock: CLOCK_MONOTONIC, id 1
presentation clock resolution: 0.000000001 s
[00:00:06.866] Loading module '/usr/lib/weston/desktop-shell.so'
[00:00:06.867] launching '/usr/libexec/weston-keyboard'
[00:00:06.867] launching '/usr/libexec/weston-desktop-shell'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'. Disabiling compose
W: [pulseaudio] authkey.c: Failed to open cookie file '//.config/pulse/cookie': No such file or directory
W: [pulseaudio] authkey.c: Failed to load authentication key '//.config/pulse/cookie': No such file or directory
W: [pulseaudio] authkey.c: Failed to open cookie file '//.pulse-cookie': No such file or directory
W: [pulseaudio] authkey.c: Failed to load authentication key '//.pulse-cookie': No such file or directory
E: [pulseaudio] module-rescue-streams.c: module-rescue-stream is obsolete and should no longer be loaded. Please remove it from your configuration.
W: [pulseaudio] server-lookup.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Using X11 for dbus-daemon autolaunch was disabled at compile time, set your DBUS_SESSION_BUS_ADDRESS instead
W: [pulseaudio] main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Using X11 for dbus-daemon autolaunch was disabled at compile time, set your DBUS_SESSION_BUS_ADDRESS instead
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'. Disabiling compose
[00:00:10.840] Detected a monitor change on head 'HDMI-A-1', not bothering to do anything about it.

[END] 2023/5/28 11:04:35

coolpi-4b-ubuntu20.04.zip 可以通过DP输出显示。
coolpi-4b-ubuntu22-20230201.zip 可以通过DP输出显示。

[BEGIN] 2023/5/28 11:16:09
DDR V1.09 a930779e06 typ 22/11/21-17:50:56
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x6
CH0 RX Vref:29.7%, TX Vref:24.8%,0.0%
CH1 RX Vref:29.7%, TX Vref:23.8%,0.0%
CH2 RX Vref:30.7%, TX Vref:22.8%,0.0%
CH3 RX Vref:28.7%, TX Vref:23.8%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
Boot1 Release Time: Nov 22 2022 14:37:46, version: 1.10
Emmc IO init.
Emmc IO init.
mmc_set_bus_width: 1
SetEmmcClk: 375000, 2, 64
SetEmmcClk: 375000, 2, 64
mmc_set_bus_width: 8
SetEmmcClk: 200000000, 0, 3
Enable PHY CLK: 200000000, timing: 9
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=59640MB
FwPartOffset=2000 , 100000
UsbBoot ...60549
powerOn 60822
SoftReset, 17862256 us
DDR V1.09 a930779e06 typ 22/11/21-17:50:56
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x6
CH0 RX Vref:29.7%, TX Vref:23.8%,0.0%
CH1 RX Vref:28.7%, TX Vref:24.8%,0.0%
CH2 RX Vref:29.7%, TX Vref:22.8%,0.0%
CH3 RX Vref:28.7%, TX Vref:23.8%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
INFO: Preloader serial: 2
NOTICE: BL31: v2.3():v2.3-481-g17b41886e:derrick.huang
NOTICE: BL31: Built : 16:20:07, Dec 7 2022
INFO: spec: 0x13
INFO: ext 32k is valid
INFO: ddr: stride-en 4CH
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO: system boots from cpu-hwid-0
INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO: BL31: Initialising Exception Handling Framework
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INFO: hdmirx_handler: dma not on, ret
I/TC:
I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022年 09月 20日星期二 09:41:09 CST aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9

COOLPI LOADER BY YANYI(Jan 04 2023)

DRAM: 4 GiB
Using default environment

Starting kernel ...

I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
[ 5.327502] rk-pcie fe190000.pcie: IRQ msi not found
[ 5.327520] rk-pcie fe190000.pcie: Missing *config* reg space
[ 5.327610] rk-pcie fe190000.pcie: Missing *config* reg space
[ 5.327639] rk-pcie fe190000.pcie: invalid resource
[ 5.330482] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[ 5.331618] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[ 5.331623] rkvdec2_init:1010: No niu aclk reset resource define
[ 5.331627] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[ 5.331630] rkvdec2_init:1013: No niu hclk reset resource define
[ 5.332158] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[ 5.332162] rkvdec2_init:1010: No niu aclk reset resource define
[ 5.332166] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[ 5.332168] rkvdec2_init:1013: No niu hclk reset resource define
[ 5.333874] mpp_iommu_probe:434: failed to get device node
[ 5.333879] mpp_av1dec av1d-master: failed to attach iommu
[ 5.862627] rk806 spi2.0: no sleep-setting state
[ 5.867248] rk806 spi2.0: no reset-setting pinctrl state
[ 5.872552] rk806 spi2.0: no dvs-setting pinctrl state
[ 6.085044] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[ 6.092399] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[ 6.099748] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[ 6.107097] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[ 6.114445] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[ 6.121655] tinker-mcu: send_cmds: send command failed
[ 6.126784] tinker-mcu: tinker_mcu_probe: init_cmd_check failed, -6
[ 6.697131] tinker-ft5406: tinker_ft5406_probe: wait connected timeout
[ 6.715799] : terminal subdev does not exist
[ 6.720073] : terminal subdev does not exist
[ 6.724337] : terminal subdev does not exist
[ 6.728592] : terminal subdev does not exist
[ 6.732856] : get_remote_sensor: video pad[0] is null
[ 6.737900] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 6.745110] : get_remote_sensor: video pad[0] is null
[ 6.750153] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 6.757364] : get_remote_sensor: video pad[0] is null
[ 6.762410] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 6.769623] : get_remote_sensor: video pad[0] is null
[ 6.774667] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 6.783030] rockchip-mipi-csi2: Async registered subdev
[ 6.852052] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[ 6.864697] debugfs: File 'Capture' in directory 'dapm' already present!
[ 6.887401] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
[ 7.225443] debugfs: File 'Left Hp mixer' in directory 'dapm' already present!
[ 7.232656] debugfs: File 'Right Hp mixer' in directory 'dapm' already present!
[ 7.239953] debugfs: File 'HPCP L' in directory 'dapm' already present!
[ 7.246553] debugfs: File 'HPCP R' in directory 'dapm' already present!
[ 7.253154] debugfs: File 'HPVOL L' in directory 'dapm' already present!
[ 7.259840] debugfs: File 'HPVOL R' in directory 'dapm' already present!
[ 7.268038] ov5648 8-0036: could not get default pinstate
[ 7.273432] ov5648 8-0036: could not get sleep pinstate
[ 7.281566] ov5648 8-0036: Unexpected sensor id(000000), ret(-5)
[ 7.288589] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.297725] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.306840] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
[ 7.307090] rockchip_headset rk-headset: Can not read property headset_gpio
[ 7.308401] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[ 7.308407] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[ 7.308413] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[ 7.311995] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
[ 7.321617] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.338619] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
[ 7.382898] RKNPU fdab0000.npu: failed to find power_model node
[ 7.388812] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[ 7.395412] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
writable: clean, 150833/480496 files, 1871218/1920000 blocks
[ 8.618661] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 8.625551] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 8.625553] rkcif_scale_ch3: update sensor info failed -19
[ 8.627076] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 8.627079] rkcif_tools_id0: update sensor info failed -19
[ 8.627807] stream_cif_mipi_id2: update sensor info failed -19
[ 8.628317] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 8.628319] rkcif_tools_id2: update sensor info failed -19
[ 8.630903] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 8.630904] stream_cif_mipi_id1: update sensor info failed -19
[ 8.632362] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 8.632364] rkcif_tools_id1: update sensor info failed -19
[ 8.637110] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 8.638365] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 8.638368] rkcif_scale_ch0: update sensor info failed -19
[ 8.638597] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 8.638599] rkcif_scale_ch1: update sensor info failed -19
[ 8.642837] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 8.644494] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 8.644496] stream_cif_mipi_id3: update sensor info failed -19
[ 8.651606] rkcif_scale_ch2: update sensor info failed -19
[ 8.657084] stream_cif_mipi_id0: update sensor info failed -19
[ 8.993903] aicbsp: sdio_err:: bus down
[ 9.409415] ieee80211 phy0:
[ 9.409415] *******************************************************
[ 9.409415] ** CAUTION: USING PERMISSIVE CUSTOM REGULATORY RULES **
[ 9.409415] *******************************************************
[ 17.765468] of_dma_request_slave_channel: dma-names property of node '/serial@febc0000' missing or empty
[ 18.512805] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 18.521992] stream_cif_mipi_id0: update sensor info failed -19
[ 18.528059] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 18.537187] stream_cif_mipi_id1: update sensor info failed -19
[ 18.543200] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 18.552324] rkcif_tools_id2: update sensor info failed -19
[ 18.557999] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 18.567122] stream_cif_mipi_id2: update sensor info failed -19
[ 18.573120] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 18.582241] stream_cif_mipi_id3: update sensor info failed -19
[ 18.588221] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 18.597348] rkcif_scale_ch0: update sensor info failed -19
[ 18.603015] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 18.612144] rkcif_scale_ch1: update sensor info failed -19
[ 18.617907] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 18.627058] rkcif_scale_ch2: update sensor info failed -19
[ 18.632716] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 18.641842] rkcif_scale_ch3: update sensor info failed -19
[ 18.647502] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 18.656627] rkcif_tools_id0: update sensor info failed -19
[ 18.662282] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 18.671404] rkcif_tools_id1: update sensor info failed -19
[ 18.676881] dma-pl330 fea30000.dma-controller: fill_queue:2263 Bad Desc(2)
[ 18.735887] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 18.745025] stream_cif_mipi_id0: update sensor info failed -19
[ 18.750923] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 18.760046] stream_cif_mipi_id1: update sensor info failed -19
[ 18.765931] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 18.775053] rkcif_tools_id2: update sensor info failed -19
[ 18.780590] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 18.789712] stream_cif_mipi_id2: update sensor info failed -19
[ 18.795597] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 18.804717] stream_cif_mipi_id3: update sensor info failed -19
[ 18.810604] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 18.819726] rkcif_scale_ch0: update sensor info failed -19
[ 18.825262] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 18.834384] rkcif_scale_ch1: update sensor info failed -19
[ 18.840063] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 18.849192] rkcif_scale_ch2: update sensor info failed -19
[ 18.854745] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 18.863868] rkcif_scale_ch3: update sensor info failed -19
[ 18.869571] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 18.878702] rkcif_tools_id0: update sensor info failed -19
[ 18.884255] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 18.893378] rkcif_tools_id1: update sensor info failed -19
[ 19.378532] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 19.387716] stream_cif_mipi_id0: update sensor info failed -19
[ 19.393704] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 19.402835] stream_cif_mipi_id1: update sensor info failed -19
[ 19.408741] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 19.417865] rkcif_tools_id2: update sensor info failed -19
[ 19.423425] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 19.432543] stream_cif_mipi_id2: update sensor info failed -19
[ 19.438437] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 19.447561] stream_cif_mipi_id3: update sensor info failed -19
[ 19.453460] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 19.462577] rkcif_scale_ch0: update sensor info failed -19
[ 19.468114] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 19.477230] rkcif_scale_ch1: update sensor info failed -19
[ 19.482727] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 19.491843] rkcif_scale_ch2: update sensor info failed -19
[ 19.497375] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 19.506490] rkcif_scale_ch3: update sensor info failed -19
[ 19.512028] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 19.521146] rkcif_tools_id0: update sensor info failed -19
[ 19.526681] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 19.535796] rkcif_tools_id1: update sensor info failed -19

Ubuntu 22.04.1 LTS coolpi ttyS0

coolpi login: DDR V1.09 a930779e06 typ 22/11/21-17:50:56
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x6
CH0 RX Vref:29.7%, TX Vref:23.8%,0.0%
CH1 RX Vref:29.7%, TX Vref:24.8%,0.0%
CH2 RX Vref:30.7%, TX Vref:22.8%,0.0%
CH3 RX Vref:28.7%, TX Vref:23.8%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
INFO: Preloader serial: 2
NOTICE: BL31: v2.3():v2.3-481-g17b41886e:derrick.huang
NOTICE: BL31: Built : 16:20:07, Dec 7 2022
INFO: spec: 0x13
INFO: ext 32k is valid
INFO: ddr: stride-en 4CH
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO: system boots from cpu-hwid-0
INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO: BL31: Initialising Exception Handling Framework
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INFO: hdmirx_handler: dma not on, ret
I/TC:
I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022年 09月 20日星期二 09:41:09 CST aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9

COOLPI LOADER BY YANYI(Jan 04 2023)

DRAM: 4 GiB
Using default environment

Starting kernel ...

Ubuntu 22.04.1 LTS coolpi ttyS0

[END] 2023/5/28 11:25:41

里面的coolpi-4b-android12-20230329.zip不能通过DP输出显示。coolpi-4b-android12-20230329.img【2GB出头的大小】

[BEGIN] 2023/5/28 11:26:04
DDR V1.09 a930779e06 typ 22/11/21-17:50:56
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x6
CH0 RX Vref:29.7%, TX Vref:23.8%,0.0%
CH1 RX Vref:29.7%, TX Vref:23.8%,0.0%
CH2 RX Vref:29.7%, TX Vref:22.8%,0.0%
CH3 RX Vref:28.7%, TX Vref:22.8%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
Boot1 Release Time: Nov 22 2022 14:37:46, version: 1.10
Emmc IO init.
Emmc IO init.
mmc_set_bus_width: 1
SetEmmcClk: 375000, 2, 64
SetEmmcClk: 375000, 2, 64
mmc_set_bus_width: 8
SetEmmcClk: 200000000, 0, 3
Enable PHY CLK: 200000000, timing: 9
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=59640MB
FwPartOffset=2000 , 100000
UsbBoot ...60543
powerOn 60814
SoftReset, 30057003 us
DDR V1.09 a930779e06 typ 22/11/21-17:50:56
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x6
CH0 RX Vref:30.7%, TX Vref:23.8%,0.0%
CH1 RX Vref:28.7%, TX Vref:23.8%,0.0%
CH2 RX Vref:30.7%, TX Vref:22.8%,0.0%
CH3 RX Vref:28.7%, TX Vref:22.8%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
INFO: Preloader serial: 2
NOTICE: BL31: v2.3():v2.3-481-g17b41886e:derrick.huang
NOTICE: BL31: Built : 16:20:07, Dec 7 2022
INFO: spec: 0x13
INFO: ext 32k is valid
INFO: ddr: stride-en 4CH
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO: system boots from cpu-hwid-0
INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO: BL31: Initialising Exception Handling Framework
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INFO: hdmirx_handler: dma not on, ret
I/TC:
I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022年 09月 20日星期二 09:41:09 CST aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9

COOLPI LOADER BY YANYI(Jan 04 2023)

DRAM: 4 GiB
Using default environment

Device 0: unknown device
MMC: no card present
mmc_init: -123, time 2
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Loading order: usb - tf - emmc
bank id invalid
request for 141 failed:-22
bank id invalid
request for 141 failed:-22
resetting USB...
Bus usb@fc880000: USB EHCI 1.00
scanning bus usb@fc880000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
** Bad device usb 0 **
** Bad device usb 0 **
MMC: no card present
mmc_init: -123, time 2
MMC: no card present
mmc_init: -123, time 2
** Bad device mmc 1 **
MMC: no card present
mmc_init: -123, time 2
** Bad device mmc 1 **
switch to partitions #0, OK
mmc0(part 0) is current device
reading cmdline.txt
switch to partitions #0, OK
mmc0(part 0) is current device
reading config.txt
reading /vmlinuz
17029361 bytes read in 97 ms (167.4 MiB/s)
reading /initrd.img
10290583 bytes read in 60 ms (163.6 MiB/s)
reading /rk3588s-cp4.dtb
225093 bytes read in 5 ms (42.9 MiB/s)
Uncompressed size: 37402632 = 0x23AB808
## Flattened Device Tree blob at 0x0a100000
Booting using the fdt blob at 0x0a100000
'reserved-memory' ramoops@110000: addr=110000 size=e0000
Loading Ramdisk to eb006000, end eb9d6597 ... OK
Loading Device Tree to 00000000eafcc000, end 00000000eb005f44 ... OK
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x1f0000000 - 0x200000000 (size: 0x10000000)

Starting kernel ...

I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
DDR V1.09 a930779e06 typ 22/11/21-17:50:56
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x6
CH0 RX Vref:29.7%, TX Vref:23.8%,0.0%
CH1 RX Vref:28.7%, TX Vref:23.8%,0.0%
CH2 RX Vref:30.7%, TX Vref:22.8%,0.0%
CH3 RX Vref:28.7%, TX Vref:23.8%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
INFO: Preloader serial: 2
NOTICE: BL31: v2.3():v2.3-481-g17b41886e:derrick.huang
NOTICE: BL31: Built : 16:20:07, Dec 7 2022
INFO: spec: 0x13
INFO: ext 32k is valid
INFO: ddr: stride-en 4CH
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO: system boots from cpu-hwid-0
INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO: BL31: Initialising Exception Handling Framework
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INFO: hdmirx_handler: dma not on, ret
I/TC:
I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022年 09月 20日星期二 09:41:09 CST aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9

COOLPI LOADER BY YANYI(Jan 04 2023)

DRAM: 4 GiB
Using default environment

Device 0: unknown device
MMC: no card present
mmc_init: -123, time 2
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Loading order: usb - tf - emmc
bank id invalid
request for 141 failed:-22
bank id invalid
request for 141 failed:-22
resetting USB...
Bus usb@fc880000: USB EHCI 1.00
scanning bus usb@fc880000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
** Bad device usb 0 **
** Bad device usb 0 **
MMC: no card present
mmc_init: -123, time 2
MMC: no card present
mmc_init: -123, time 2
** Bad device mmc 1 **
MMC: no card present
mmc_init: -123, time 2
** Bad device mmc 1 **
switch to partitions #0, OK
mmc0(part 0) is current device
reading cmdline.txt
switch to partitions #0, OK
mmc0(part 0) is current device
reading config.txt
reading /vmlinuz
17029361 bytes read in 96 ms (169.2 MiB/s)
reading /initrd.img
1351179 bytes read in 12 ms (107.4 MiB/s)
reading /rk3588s-cp4.dtb
225093 bytes read in 5 ms (42.9 MiB/s)
Uncompressed size: 37402632 = 0x23AB808
## Flattened Device Tree blob at 0x0a100000
Booting using the fdt blob at 0x0a100000
'reserved-memory' ramoops@110000: addr=110000 size=e0000
Loading Ramdisk to eb88c000, end eb9d5e0b ... OK
Loading Device Tree to 00000000eb852000, end 00000000eb88bf44 ... OK
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x1f0000000 - 0x200000000 (size: 0x10000000)

Starting kernel ...

拒绝访问。

Connection closed.

Disconnected from remote host(115200UART3) at 11:46:21.

Type `help' to learn how to use Xshell prompt.
[C:\~]$

Connecting to COM3...
Connected.

[END] 2023/5/28 11:46:51

你可能感兴趣的:(杂质,杂质)

Day777--【这届年轻人很懒，“但在你面前，我可以多受些麻烦。”】卖小妞的饼干
图片发自App中学时期，会因为朋友一句误会，手写三页信件解释来龙去脉，必须每天一起上学放学吃饭上洗手间，永远腻在一起才能彰显关系密切。而现在，相比每段关系都闹得轰轰烈烈，我们更喜欢顺其自然。懒得耗费大量时间去维护一段关系，懒得在与朋友产生矛盾后去辩解，懒得因为朋友做出背叛友谊的行为而愤怒诘问。不再把目光放在朋友的数量上，更在乎每一个还在身边的人是否饱含真心。我们都在期待着更舒服自然没有杂质的关系，
阳光傅雷的悲凉人生兰之猗
“翻译家死了，留下了洁白的纪念碑，留下了一颗充满大爱的心。纯真得像孩子，虔诚得像教徒，比象牙还缺少杂质。“图片发自App更多的是因为对傅雷的理解吧，这个假期，我阅读了傅的一本译作。虽然，对巴尔扎克的著作含着怯意。因为我清晰地记得许多年前读《高老头》的那种冰凉。当时读完，直感叹啊，政治上说得不错，资本主义社会真太可恶了，人与人之间确实是赤裸的金钱关系。可怜的高老头得用多少自己的血汗钱才能换来女儿的一
细读“生命答卷” 汲取精神力量木同木同
近日，新华社发表题为《一名组织部长的生命答卷——追记青海省委组织部原副部长朱治国》的文章，生动讲述了朱治国同志的恪守初心、担当奉献、廉洁奉公的先进典型事迹，作为党的干部，对党的忠诚、对人民的担当、对事业的负责，就是体现在现实的实干和无私的奉献之中。用担当书写忠诚，彰显政治本色。朱治国同志用他短暂的一生诠释了唯一的、彻底的、无条件的、不掺杂任何杂质的、没有任何水分的对党忠诚政治本色。他常说，“做党的
修炼 Joanbetty永恒
生活中很多人每天过得浑浑噩噩的，觉得对生活丧失的奋斗的方向，有时候觉得生活没有多大意义。有的人能够有条不紊的完成领导交代的任务，而有的人却因为工作量增加而忙得不知所措，这一切源于我们对时间管理出现问题。分清主次，有时我们觉得忙忙碌碌，却又不知道都忙了什么。事实上，不分主次的忙碌，常常是自以为努力的错觉，难以达到预期的目标。听过一句话，“生活的智慧，在于逐渐澄清、滤除那些不重要的杂质，而保留最重要的
亲爱的，你是我的小太阳 CICIkylin
随着年龄的增长，爱情好像变得越来越变味了，或许准确的说，不是爱情，而是婚姻。过去的时候，婚姻是两个人一起搭伙过日子。现在也有不同，高中阶段的爱情最最纯粹，就是喜欢彼此，不掺杂任何杂质。大学的生活，或许因为爱情，或许因为寂寞。大学毕业，工作稳定后，又开始了挑选结婚对象的过程中了，事业单位，国家编制，五险一金，社保，等等，房子，车子，票子一系列都成为了结婚的前提……在该谈恋爱的年龄谈恋爱，在该结婚的时
炸萝卜丸子超好吃的做法爱生活爱美食
炸萝卜丸子原料：大红萝卜400克，冬笋50克，冬菇50克，豆腐干50克，味精4克，精盐15克，淀粉15克，面粉100克，花生油750克（约耗150克），酱油5克，椒盐15克，葱、姜、香油少许。做法：1.将萝卜洗净，擦成细丝；冬菇用温水泡发好后，去蒂、杂质，洗净，切末；冬笋洗净，切末；豆腐干、葱、姜均切末，待用。2.锅内放水烧沸，下萝卜丝焯一下，捞出，在清水中浸泡1小时后捞出，沥干水分，放入盆内，将
01节，什么是听书稿写作？时代给普通人最好的赚钱机会茉莉花开Aloha
普通人也可以写出好的东西，写作赚钱，投稿赚钱。读者杂质刊登。持续写稿赚钱机会有没有？如何靠写作养活自己？举例1，有个学员开了写作店，专门帮别人写文章的店，接发言稿，个人总结什么的。有公务员，医生需要，学员在淘宝帮别人写文章，一个月有几千收入。2.还有个学员学完后辅导自己孩子语文作业，学写作教孩子，成绩提高后，班里别的孩子也来学习，每人2000，收入10万。做成一件事需要天时地利人和，新学员，投稿积
誓言心语晓阳阳
一、你过得太闲，才有时间执着在无意义的事情上，才有时间无病呻吟所谓痛苦。你看那些忙碌的人，他们的时间都花在努力上。二、所有的动力都来自内心的沸腾。如果你做不到一件事，无论是搞好关系，还是寻找爱人，还是减肥，都是因为你还没有真正想做。三、人性本就薄凉，用你的时候有多热情，不用你的时候就有多冷淡。四、水的清澈，并非因为它不含杂质，而是在于懂得沉淀；心的通透，不是因为没有杂念，而是在于明白取舍。五、不是
不粘锅也要开锅？搞清楚这3点你的锅可以多用两年猫腻食探
众所周知刚买的铁锅是一定要开锅的，这样既能把新锅的杂质弄干净，又可以防止铁锅生锈；而对于新买的不粘锅到底需不需要开锅呢？实际上不粘锅本身自带“不粘光环”，如果按照铁锅的开锅方法，用钢丝球去清洗是大错特错的，不粘锅其实不需要特意的开锅，只需要把它清洗干净即可，可以用洗洁精和软布对新买的不粘锅进行一个清洗，如果还不放心可以用洗米水浸泡，再用开水清洗干净即可。不粘锅开锅虽简单，但是在后期的使用及养护中要
干净做人，善良做事一亿三千万y
干净做人，不坑人，不骗人，不算计，不讨好。怀揣良心处世，凭借人品交友。善良做事，不虚伪，不耍滑，不昧心，不使坏。内心没有杂质，交往不会虚假。一个干净的人，以良心为行为标准，以人品为做事前提，行得正站得稳，说得出做得到，不为钱财坑人，不为利益害人。一个善良的人，以真心来帮助他人，以诚恳来对待朋友。再难不失骨气，再苦不丢尊严，帮助人不求利，受人助懂感恩。人活一世，用钱财换来感情，根本走不长远。用人品赢
美味雪莲果红枣银耳羹大卓的娘
准备:银耳1朵、红枣一把、雪莲果一个、百合一把、冰糖适量制作方法：1、银耳用水冲掉杂质，置于清水中浸泡2小时左右图片发自App2、浸泡过程中换一两次水，泡至银耳发白、胀大。3、雪莲果削皮切块！图片发自App4、将泡发好的银耳剪去根蒂，撕成小片后与冲净的红枣、百合、还有雪莲果切块一起下锅。图片发自App5、按下电饭煲煲汤功能！图片发自App6、出锅前加入冰糖搅化即可。图片发自App
我的又一个开始雲行天下
水的清澈，并非因为它不含杂质，而是在于懂得沉淀；心的通透，不是因为没有杂念，而是在于明白取舍。由于春节前后事务颇多，同时为了让自己活得更加轻松点、洒脱点，于是我选择了暂时性放弃，放弃锻练身体、放弃读书、放弃更文，总之放弃了自律，放纵了自己。其结果可想而知！今天早上醒来顿然醒悟，继而默默地送给自己一个早安寄语：“结束，找回自律，改变从今天开始”。晚下班后利用碎片化时间把一周的英文水滴阅读补齐，锻炼身
向上生长之给生活做减法读书的故事
剔除了杂志才会留下无暇之美。其实呢，剔除杂质最好的办法就是用品质去代替他。人是会知道垃圾污染自己的动物之一，清洁工每天早上都要清理人们制造。成堆的垃圾，这些有形的垃圾容易清理，而人们内心诸多烦恼，欲望，忧愁，痛苦等无形的垃圾确实不那么容易清理的。为了保持心灵家园的春节，我们必须选择勇敢，乐观，积极的思想，并且及时进行精神扫除，丢弃或扫掉拖累心灵的东西，除此之外，还可以用美德来充盈我们心灵的空间，让
20190421-《华杉讲透王阳明传习录》-学习笔记-王阳明的炼金论吴涛_虹霖餐饮品牌战略
王阳明的炼金论。为什么炼？因为金子在土壤中容易和其他杂质混合在一起。炼金，就是炼金子的纯度，减去金子的附加重量。因为金子发光，不靠份量，靠纯度，千金和1克金都是金子，虽然重量不一样。用在人身上呢就是减去人欲，恢复天理。因为人在社会中行走，特别容易沾染俗气，失去了天理，所以需要不断地去人欲，恢复人的本心。用在“为学”和“修心”上呢则是“为学”和“修心”需要同时进行，而是先后进行，一先一后，人就会失去
假如你遇到这种情况，会如何处理？笑笑13194023537
这两天也挺奇怪的，连续两天遇到顾客买到有问题的商品，昨天是因为饮料里有杂质，今天是因为商品过了保质期。昨天的那个顾客年纪大约三十岁左右，买了两三件商品，其中有一瓶饮料。他说饮料里面有个黑色的东西，他已经打开喝了几口了。这个顾客一开始是另外一位同事接待的，后来她叫我去帮忙。只听顾客说，你们这个饮料卖了很久了，我上次就看到在卖，而且价格比外面便宜很多。我就觉得很奇怪。他的言外之意就是，你们这个商品便宜
如果我是玻璃，是尘埃，是粉末梦娜小迷糊
如果我曾经有一颗深爱你的心，那你完全可以肆无忌惮。可是如果我是一块玻璃，那你一定只能伤害我一次的。因为一次，就足以摔的粉碎。如果我是一粒尘埃，那么你只能抹弑我一次的。因为一次，就会让我扬起尘埃，变得深刻。如果我是一层粉末，那么你只能看见我一次的纯粹的，因为一次，就会让我掺了杂质，变了质感。如果我是玻璃，是尘埃，是粉末，那么这些你冠之以名的童话，一定是容易推敲击碎的。如果有人总是为爱情深，那有人一定
了解一下周伶丽
白糖、红糖、冰糖三者功效有差别吗怎样吃最合适赶紧来看看吧白糖、红糖、冰糖，其实大都是从甘蔗里面提取的，都属于蔗糖。红糖是没有经过高度精炼的蔗糖，含各种矿物质元素如钙、镁、磷、铁等，比较容易变质。白糖也就是白砂糖，在红糖的处理基础之上，经过纯化、脱色，最后再去除杂质，就变成了白糖。白糖的糖含量较高，其他物质含量较少。冰糖以白砂糖为原料，经过再溶、重结晶而制成，品质纯正，不易变质。常见的方糖是用精制砂
王德峰3.2《大学》三纲领与人生三重境界（下）念念流迁
我们继续讨论《大学》中的三纲领的第三条纲领：止于至善。止于至善如阳明所说的，就是“此心纯乎天理之极”。这里强调的是“纯”，纯洁的纯，完美的人生是生命情感的纯粹，没有牵涉到由于私欲而带来的杂质，这叫“纯乎天理之极”，这样的话我们的每一份生命情感都符合天道。正如《中庸》当中所说的，《中庸》第一章有这样一句话：“天命之谓性，率性之谓道，修道之谓教。”它的意思就是说，我们的人性来自天道——“天命之谓性”；
心静如水阿钊V
宁静可以过滤生活中的浮躁,过滤出浅薄、粗陋等人性的杂质。宁静是一种气质、一种修养、一种境界、一种充满内涵的悠远。现代人品味着生活的紧张与焦灼,已很难品味到静的清芬与悟愉,都渐渐浮躁起来,可是浮躁往往不利于事情的发展。人要活得轻松自得,就要做到心静如水,不为外界之物所左右。这是一条古老的街,到处都是老旧的建筑物。老街上有一位老铁匠,由于早已没人需要打制铁器,他便改卖铁锅、斧头和拴小狗的链子。他的经营
糖醋排骨 yuanxiu
用料排骨500克葱适量姜适量蒜适量冰糖适量料酒1勺生抽2勺糖3勺香醋4勺八角2个香叶2片做法1、排骨清洗一下，去除血水和表面的杂质，直到洗排骨的水变得清澈，这样做出来排骨没有腥味；葱切成段，姜切片备用。2、锅里加水烧热，把排骨放入开水中，加点葱姜，焯烫1分钟左右直到排骨变色，然后捞出来备用。3、调一个万能糖醋汁，碗中加入1勺料酒、2勺生抽、3勺白糖、4勺香醋，搅拌至糖融化。4、然后再来炒一个糖色，
基于引导滤波的暗通道matlab,基于加权引导滤波的水下图像增强算法来自大马士革的钢
在水下环境中，由于水分子以及溶解的杂质对光线的吸收和散射作用，导致水下图像出现对比度低、噪声较大等严重的退化问题。这不仅降低了图像的整体视觉效果，而且给后续图像的自动处理和识别产生不利影响。因此，研究有效的水下图像增强算法具有重要意义。近年来，水下图像增强方法主要分为模型法和非模型法。模型法利用光照物理模型估计图像的降质模式，根据估计的结果复原降质图像。非模型法不考虑水下光学成像机理和光照机理，直
别让人生，输给了心情筠尚姿
人生不可能一尘不染，没有一点杂质，就像水清则无鱼。图片发自App人生有一点点甜，也有一点点苦，有一点点好，也有一点点坏，有一点点希望，也有一点点无奈，生活才会更生动、更美好、更韵味悠长。再好的人也不会十全十美，再美好的爱情也不可能纤尘不染，你若试着包容，就会发现这个世界并不像你以为的那样糟糕。不为模糊不清的未来担忧，只为清清楚楚的现在努力。幸福就象一道光，除了让它照在自己身上之外，有时也要让它照在
晨间日记顺着时光一起老去
南方冬天早晨的风是寒冷的，虽有一丝丝凉意，但却更能吹醒我昨夜的愚钝。回想起来，我会因为好友的微信中断而胡思乱想，但我却不会因为父母的信息中断而多想，想了想，因为你的潜意识里是认定父母是爱你的，在乎你的，关心你的，因为他们的爱是无私的，不含任何杂质的，清澈而又明晰。昨夜的争吵是他们寒了心，可是他们的爱却不会减少一丝一毫，他们像一个小孩子一样在你面前卑微着，第二天依然叫你吃饭，依然给你夹最好吃的菜放在
杜笙Tulsimer抛光树脂MB-115+MB-106UP技术参数 wangsir8888 百度 twitter 微信
高纯水终端混床树脂是在极其严格的工艺控制条件下制成的，树脂经过特别的处理，再生转型已接近极限化，故具有极高的再生效率和极低的杂质含量，并具有强的交换能力和很高的机械强度。高纯水终端混床树脂无需再生，就可广泛应用于电子工业高纯水制备；实验室高纯水；高效液相色谱用高纯水；含放射物处理；药品；半导体行业；凝结水精制以及其它各种水处理工艺的终端混床精处理。高品质的混床树脂可确保出水水质达到稳定，产水水质1
Tulsimer MB-1518——超纯水抛光树脂的技术应用 C-158 7636 413O 算法全文检索大数据
超纯水的制备和稳定性一直是相关领域极为重视的，那么超纯水中常会用到的抛光树脂技术，进口和国产对比起来究竟谁更甚一筹呢？接下来为大家分享的技术就是超纯水制备中常会用到的进口品牌：美国Tulsimer杜笙树脂中抛光树脂MB-106UP的技术参数。超纯水（Ultrapurewater）又称UP水，是指电阻率达到18MΩ*cm（25℃）的水。这种水中除了水分子外，几乎没有什么杂质，更没有细菌、病毒、含氯二
MB-106up抛光树脂，产水18兆欧的抛光树脂 Khs156721678O1 人工智能
MB-106UP是一种高阶核子级抛光树脂，由核子级强酸型阳离子T46Li和核子级强碱型阴离子A33OH按照1:2的体积比预先混合。这种树脂特别适用于超纯水系统抛光，因为它具有很高的交换容量和优越的物理特性。它适合于电子产业的生产、半导体和映像管产业、实验室激光高精仪器、医用行业等需要超纯水的领域。在核电厂中，MB-106UP树脂主要用于去除水中的痕量杂质，确保反应堆的安全运行。由于其高交换容量和优
超纯水制备，MB-106UP抛光树脂的技术解析 CYL_15876364130 大数据 java
超纯水（Ultrapurewater）又称UP水，是指电阻率达到18MΩ*cm（25℃）的水。这种水中除了水分子外，几乎没有什么杂质，更没有细菌、病毒、含氯二噁英等有机物，当然也没有人体所需的矿物质微量元素，也就是几乎去除氧和氢以外所有原子的水。可以用于超纯材料（半导体原件材料、纳米精细陶瓷材料等）应用蒸馏、去离子化、反渗透技术或其它适当的超临界精细技术的制备过程。超纯水制备主要包括以下三个阶段，
新型浓盐酸净化除铁装置的技术分解 C-158 7636 413O 深度优先
盐酸是氯化氢（HCI)的水溶液，是重要的基本化工原料，广泛用于化工原料、染料、医药、食品、印染、皮革、制糖、冶金等行业。纯盐酸为无色透明液体，工业盐酸是工业生产所得浓度为30%或36%的盐酸，因含有铁、氯等杂质而呈浅黄色。工业盐酸一般是将氯气和氢气在合成炉中燃烧生成氯化氢气体，经水吸收而成。合成炉温度很高，氯气和钢铁炉壁接触而反应，导致生成的氯化氢气体中混有三氯化铁蒸汽；这种气体在管道输送中也会引
MB-106UP——进口抛光树脂的技术优势 C-158 7636 413O 全文检索大数据
超纯水的制备和稳定性一直是相关领域极为重视的，那么超纯水中常会用到的抛光树脂技术，进口和国产对比起来究竟谁更甚一筹呢？接下来为大家分享的技术就是超纯水制备中常会用到的进口品牌：美国Tulsimer杜笙树脂中抛光树脂MB-106UP的技术参数。超纯水（Ultrapurewater）又称UP水，是指电阻率达到18MΩ*cm（25℃）的水。这种水中除了水分子外，几乎没有什么杂质，更没有细菌、病毒、含氯二
减肥困难心点灵咨询
马上夏季，今天去艾灸，医生说，红豆薏仁茶。红豆薏仁茶。起到除湿利水、通利小便、健脾养胃、润肠通便等作用。适量饮用不仅可以祛除体内的湿气，同时还可以降血压、降血脂、清利小便、调节血糖、提高免疫力、预防结石。图片发自App泡制红豆薏仁茶的方法也非常简单，把红豆和薏仁先用水洗净，再次加水浸泡三小时左右。再把冬瓜去皮切块，玉米须杂质后切段。接下来把所有材料同时放入锅中，加适量的水，烧开后即可滤汁当茶饮用。
ztree设置禁用节点 3213213333332132 JavaScript ztree json setDisabledNode Ajax
ztree设置禁用节点的时候注意，当使用ajax后台请求数据,必须要设置为同步获取数据，否者会获取不到节点对象，导致设置禁用没有效果。 $(function(){ showTree(); setDisabledNode(); });
JVM patch by Taobao bookjovi java HotSpot
在网上无意中看到淘宝提交的hotspot patch，共四个，有意思，记录一下。 7050685：jsdbproc64.sh has a typo in the package name 7058036：FieldsAllocationStyle=2 does not work in 32-bit VM 7060619：C1 should respect inline and
将session存储到数据库中 dcj3sjt126com sql PHP session
CREATE TABLE sessions ( id CHAR(32) NOT NULL, data TEXT, last_accessed TIMESTAMP NOT NULL, PRIMARY KEY (id) ); <?php /** * Created by PhpStorm. * User: michaeldu * Date
Vector 171815164 vector
public Vector<CartProduct> delCart(Vector<CartProduct> cart, String id) { for (int i = 0; i < cart.size(); i++) { if (cart.get(i).getId().equals(id)) { cart.remove(i);
各连接池配置参数比较 g21121 连接池
排版真心费劲，大家凑合看下吧，见谅~ Druid DBCP C3P0 Proxool 数据库用户名称 Username Username User 数据库密码 Password Password Password 驱动名
[简单]mybatis insert语句添加动态字段 53873039oycg mybatis
mysql数据库,id自增,配置如下： <insert id="saveTestTb" useGeneratedKeys="true" keyProperty="id" parameterType=&
struts2拦截器配置云端月影 struts2拦截器
struts2拦截器interceptor的三种配置方法方法1. 普通配置法 <struts> <package name="struts2" extends="struts-default"> &
IE中页面不居中，火狐谷歌等正常 aijuans IE中页面不居中
问题是首页在火狐、谷歌、所有IE中正常显示，列表页的页面在火狐谷歌中正常，在IE6、7、8中都不中，觉得可能那个地方设置的让IE系列都不认识，仔细查看后发现，列表页中没写HTML模板部分没有添加DTD定义，就是<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3
String,int,Integer,char 几个类型常见转换 antonyup_2006 html sql .net
如何将字串 String 转换成整数 int? int i = Integer.valueOf(my_str).intValue(); int i=Integer.parseInt(str); 如何将字串 String 转换成Integer ? Integer integer=Integer.valueOf(str); 如何将整数 int 转换成字串 String ? 1.
PL/SQL的游标类型百合不是茶显示游标(静态游标)隐式游标游标的更新和删除 %rowtype ref游标(动态游标)
游标是oracle中的一个结果集,用于存放查询的结果; PL/SQL中游标的声明; 1,声明游标 2,打开游标(默认是关闭的); 3,提取数据 4,关闭游标注意的要点:游标必须声明在declare中,使用open打开游标,fetch取游标中的数据,close关闭游标隐式游标:主要是对DML数据的操作隐
JUnit4中@AfterClass @BeforeClass @after @before的区别对比 bijian1013 JUnit4 单元测试
一.基础知识 JUnit4使用Java5中的注解（annotation），以下是JUnit4常用的几个annotation： @Before：初始化方法对于每一个测试方法都要执行一次（注意与BeforeClass区别，后者是对于所有方法执行一次）@After：释放资源对于每一个测试方法都要执行一次（注意与AfterClass区别，后者是对于所有方法执行一次
精通Oracle10编程SQL(12)开发包 bijian1013 oracle 数据库 plsql
/* *开发包 *包用于逻辑组合相关的PL/SQL类型（例如TABLE类型和RECORD类型）、PL/SQL项（例如游标和游标变量）和PL/SQL子程序（例如过程和函数） */ --包用于逻辑组合相关的PL/SQL类型、项和子程序，它由包规范和包体两部分组成 --建立包规范：包规范实际是包与应用程序之间的接口，它用于定义包的公用组件，包括常量、变量、游标、过程和函数等 --在包规
【EhCache二】ehcache.xml配置详解 bit1129 ehcache.xml
在ehcache官网上找了多次，终于找到ehcache.xml配置元素和属性的含义说明文档了，这个文档包含在ehcache.xml的注释中！ ehcache.xml ： http://ehcache.org/ehcache.xml ehcache.xsd ： http://ehcache.org/ehcache.xsd ehcache配置文件的根元素是ehcahe ehcac
java.lang.ClassNotFoundException: org.springframework.web.context.ContextLoaderL 白糖_ java eclipse spring tomcat Web
今天学习spring+cxf的时候遇到一个问题：在web.xml中配置了spring的上下文监听器： <listener> <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class> </listener> 随后启动
angular.element boyitech AngularJS AngularJS API angular.element
angular.element 描述: 包裹着一部分DOM element或者是HTML字符串，把它作为一个jQuery元素来处理。（类似于jQuery的选择器啦）如果jQuery被引入了，则angular.element就可以看作是jQuery选择器，选择的对象可以使用jQuery的函数；如果jQuery不可用，angular.e
java-给定两个已排序序列，找出共同的元素。 bylijinnan java
import java.util.ArrayList; import java.util.Arrays; import java.util.List; public class CommonItemInTwoSortedArray { /** * 题目：给定两个已排序序列，找出共同的元素。 * 1.定义两个指针分别指向序列的开始。 * 如果指向的两个元素
sftp 异常，有遇到的吗？求解 Chen.H java jcraft auth jsch jschexception
com.jcraft.jsch.JSchException: Auth cancel at com.jcraft.jsch.Session.connect(Session.java:460) at com.jcraft.jsch.Session.connect(Session.java:154) at cn.vivame.util.ftp.SftpServerAccess.connec
[生物智能与人工智能]神经元中的电化学结构代表什么? comsci 人工智能
我这里做一个大胆的猜想,生物神经网络中的神经元中包含着一些化学和类似电路的结构,这些结构通常用来扮演类似我们在拓扑分析系统中的节点嵌入方程一样,使得我们的神经网络产生智能判断的能力,而这些嵌入到节点中的方程同时也扮演着"经验"的角色.... 我们可以尝试一下...在某些神经
通过LAC和CID获取经纬度信息 dai_lm lac cid
方法1：用浏览器打开http://www.minigps.net/cellsearch.html，然后输入lac和cid信息(mcc和mnc可以填0)，如果数据正确就可以获得相应的经纬度方法2：发送HTTP请求到http://www.open-electronics.org/celltrack/cell.php?hex=0&lac=<lac>&cid=&
JAVA的困难分析 datamachine java
前段时间转了一篇SQL的文章（http://datamachine.iteye.com/blog/1971896），文章不复杂，但思想深刻，就顺便思考了一下java的不足，当砖头丢出来，希望引点和田玉。 -----------------------------------------------------------------------------------------
小学5年级英语单词背诵第二课 dcj3sjt126com english word
money 钱 paper 纸 speak 讲，说 tell 告诉 remember 记得，想起 knock 敲，击，打 question 问题 number 数字，号码 learn 学会，学习 street 街道 carry 搬运，携带 send 发送，邮寄，发射 must 必须 light 灯，光线，轻的 front
linux下面没有tree命令 dcj3sjt126com linux
centos p安装 yum -y install tree mac os安装 brew install tree 首先来看tree的用法 tree 中文解释：tree 功能说明：以树状图列出目录的内容。语　　法：tree [-aACdDfFgilnNpqstux][-I <范本样式>][-P <范本样式
Map迭代方式，Map迭代，Map循环蕃薯耀 Map循环 Map迭代 Map迭代方式
Map迭代方式，Map迭代，Map循环 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 蕃薯耀 2015年
Spring Cache注解+Redis hanqunfeng spring
Spring3.1 Cache注解依赖jar包：  <dependency> <groupId>org.springframework.data</groupId> <artifactId>spring-data-redis</artifactId>
Guava中针对集合的 filter和过滤功能 jackyrong filter
在guava库中，自带了过滤器(filter)的功能，可以用来对collection 进行过滤，先看例子： @Test public void whenFilterWithIterables_thenFiltered() { List<String> names = Lists.newArrayList("John"
学习编程那点事 lampcy 编程 android PHP html5
一年前的夏天，我还在纠结要不要改行，要不要去学php？能学到真本事吗？改行能成功吗？太多的问题，我终于不顾一切，下定决心，辞去了工作，来到传说中的帝都。老师给的乘车方式还算有效，很顺利的就到了学校，赶巧了，正好学校搬到了新校区。先安顿了下来，过了个轻松的周末，第一次到帝都，逛逛吧！接下来的周一，是我噩梦的开始，学习内容对我这个零基础的人来说，除了勉强完成老师布置的作业外，我已经没有时间和精力去
架构师之流处理---------bytebuffer的mark,limit和flip nannan408 ByteBuffer
1.前言。如题，limit其实就是可以读取的字节长度的意思，flip是清空的意思，mark是标记的意思。 2.例子. 例子代码: String str = "helloWorld"; ByteBuffer buff = ByteBuffer.wrap(str.getBytes()); Sy
org.apache.el.parser.ParseException: Encountered " ":" ": "" at line 1, column 1 Everyday都不同 $转义 el表达式
最近在做Highcharts的过程中，在写js时，出现了以下异常：严重: Servlet.service() for servlet jsp threw exception org.apache.el.parser.ParseException: Encountered " ":" ": "" at line 1,
用Java实现发送邮件到163 tntxia java实现
/* 在java版经常看到有人问如何用javamail发送邮件？如何接收邮件？如何访问多个文件夹等。问题零散，而历史的回复早已经淹没在问题的海洋之中。本人之前所做过一个java项目，其中包含有WebMail功能，当初为用java实现而对javamail摸索了一段时间，总算有点收获。看到论坛中的经常有此方面的问题，因此把我的一些经验帖出来，希望对大家有些帮助。此篇仅介绍用
探索实体类存在的真正意义 java小叶檀 POJO
一. 实体类简述实体类其实就是俗称的POJO,这种类一般不实现特殊框架下的接口，在程序中仅作为数据容器用来持久化存储数据用的 POJO（Plain Old Java Objects）简单的Java对象它的一般格式就是 public class A{ private String id; public Str